Bernina Electronic Sewing Machine Doesn't Sew and Makes Whirring Noise Only - A Common Fault Fixed
Тәжірибелік нұсқаулар және стиль
If your electronic Bernina sewing machine doesn't go and makes a whirring noise when you put your foot down, it may be as simple as the bobbin winder being engaged.
This video covers many different Bernina models. Specifically the ones where the bobbin winder spins when you put your foot down. Some other models will actuate the bobbin winder when it is engaged, even without putting your foot down.
I received this machine in for service and the customer said she plugged it in, turned it on and put her foot down to find the machine would not sew but it had powered up and was making a whirring sound.
I plugged the machine in and could not fault the machine. While servicing the machine I was wondering what could cause this issue when the penny dropped and it had to be the bobbin winder.
The bobbin winder being engaged exactly matches the fault description.
Please consider supporting the channel at Patreon - / sewingmachines
Web Site - www.institches.co.nz
Пікірлер: 7
That happened to me not long after I bought my Bernina 750. Whirring sound but no sewing, complete panic, phoned my dealer and when she asked if I had activated the bobbin accidentally and yes I had, believe me, the relief was huge. Felt like an idiot but she assured me that it happened often enough to be called a common issue. So I was nodding along with your diagnosis Gary.
A bit off topic my British Bradbury machine long bobbin hand wind machine has to be wound backwards to wind the bobbin, it took me a while to figure even with the manual to look at. Old machines when people forget to put the presser foot down and sew at high speed for very short time :-)) JAMB like cement When I test machines I always use kitchen paper towel so if I get a material jamb in the needle plate it is easier to remove the paper rather than cotton. My wife's electronic 10y old Brother detects if the presser foot has not been dropped and will not sew. I have quite a few hand wind machines and some of the very old machines you wind in the opposite direction to the Singers lots of Fun and Games using different machines. I have a Singer VS3 ? 1891 that has a very old shuttle carrier without the extra finger will snap your thread in a heartbeat if you stop and start to sew again with the needle stroke in the wrong position; the top thread gest caught in the back of the shuttle. Alter modified shuttle carrier had an extra finger to stop this, then later 28k machine improved to make it better. Thanks for the video, something else to watch for in the future. all the best
With older Berninas it was possible to wind the bobbin and sew at the same time. If I had a newer model I would not be expecting that this feature was removed.
Been there.
I've had exactly that issue with an early electronic Janome. What looks like an error code is simple a code saying the spool pin is engaged.
This happen to me on a Viking Jade. Oops! 😂 Oh, and the bobbin won't wind unless the presser foot is in the needle down position.
Trap for young players