Janome Combi - 2 in 1 Sewing Machine / Serger - Seizing - Common Issue Fixed - Part 1
Тәжірибелік нұсқаулар және стиль
This is the very versatile 2 in 1 sewing machine and serger /overlocker combo - Janome Combi. This machine has a common issue where it's starting to seize up.
This video covers the Janome Combi and the Combi 10.
In this video I track down the issue and go through some troubleshooting procedures.
This video also shows how to detach the serger / overlocker section from the main machine body.
I cover general service of the machine, along with looking at the drive belts, clutches and more.
This is part one of a two part series.
Find part 2 here - • Janome Combi - 2 in 1 ...
Part two is coming soon and it shows how to mate the serger and the sewing machines.
Please consider supporting the channel at Patreon - / sewingmachines
Web Site - www.institches.co.nz
Details of subjects covered are listed in the index below.
Index:
0:00 - Introduction
2:16 - Removing the top cover and reinstalling
3:37 - Powering the machine
4:30 - Discussing lubrication
6:20 - Starting to track down the seizure
8:03 - Removing the serger/overlocker
20:16 - Working on freeing up the serger/overlocker
22:16 - Internal belts
22:45 - The seizure is found
40:17 - Preparing to reassemble
44:18 - Belt tension
45:55 - Looking at the switching mechanism
48:15 - Conclusion and thanks
Пікірлер: 6
That was so interesting to watch and listen to. Thanks so much 🙏
Thank you for your excellent knowledge of the craft. I have a very sentimental machinethatbwas my gmas ,that i want to fix and had no idea what was wrong with it but you hit the nail on the head.
Very interesting as always, thank you !
I wonder if a bunch of thread or lint got down in there
@InStitches
5 ай бұрын
It was just lack of oil. No thread or lint found. Thanks.
Lots of screws