short walkthru of the new behringer mixer - this is a short youtube joint for the forthcoming long full length review due soon at this address: www.dancetech.com/item.cfm?thr...
Жүктеу.....
Пікірлер: 20
@RasMike2413 жыл бұрын
I just bought this today and am very excited!
@nickeax15 жыл бұрын
Thank you very much for the excellent review. As with all quality reviews. this one (both parts) was both informative and educational. 5/5
@dancetech13 жыл бұрын
@KieranVentriloquist - well you could but you'd be daf to cos if you cant adjust balance of individual channels to the monitor send then. hence one uses the uax's - monitor mixes on this scale dont need messing with once set - yes u could use the fx-sends also for monitoring but remembering they are poost-fade so will be effected by any channel fader levels, hence one usualy uses post-fade sends for monitoring cos they never get effected by channel fader levels
@iwannarockon201013 жыл бұрын
think might upgrade to this mixer soonlike. as borat would say, vERY Nice! look forward to watching more videos, and checking out the website, thanks and rock on!!!
@dancetech14 жыл бұрын
if it's good out of the box and doesnt have any manufacturing flaws then they are decently made for the money, and yes they sound fine, i'd do live gigs with one no problems as long as it was flightcased. Remember the price when evaluating this product and for that price it is very good. I cannot say how long they last tho, i've had this one for over a year now but only home use, not gigging.
@royallmuzikproductionzuk7912Ай бұрын
Greetings bruh , do you mix in the box with this mixer?
@dancetech15 жыл бұрын
the main outs have a different out level to the aux's.. are you running the cables from aux1/2 into xlr inputs or something or do the amps have 1/4" inputs? btw u can use aux1 or aux2 send for the front wedges, no difference
@dancetech15 жыл бұрын
well rhyvven it sounds like your cabling might be suspect? (the actual cable) i dunno you get a strong signal at the amp when you run a cable from the MAIN L/R 1/4" outs? - you should run the floor wedges from AUX1 out - but of course, unless you send some signal into Aux-1 BUS from a chanel you wont hear anything.
@KieranVentriloquist13 жыл бұрын
Can you use the sub groups for stage monitoring, or does that have to be done from the Aux1/2 sends? Could it be sent through one of the FX channels, without applying one of the FX? - I prefer to use sliders for monitoring, instead of a knob. Thanks
@AgentsofRush3 жыл бұрын
Can you only either have the built in FX at once or AUX working ? Can you not have the built in FX 1and 2 and also 2 more external FX?
@David93Joel14 жыл бұрын
i have a problem with mine sx3242fx and is filtering sound when all channels are down when i raise the volume in the main is filtering when all is all the way down.. what should i do..
@dancetech15 жыл бұрын
watch the full length version part-2 towards the end - see the page link in the info box over on the top right of this page
@skrijwaniskrijwani78134 жыл бұрын
Super super super super video bro
@vasantamarbate64655 жыл бұрын
Mic settings
@vasantamarbate64655 жыл бұрын
Mic gain settings
@henryvacatrujillo61958 жыл бұрын
en español forfa hace uno en español
@fonzy414 жыл бұрын
Behringers have been known to sound pretty cheap and awful. How is the overall sound of THIS console? Does it seem like this console's construction is rugged or fragile?
Пікірлер: 20
I just bought this today and am very excited!
Thank you very much for the excellent review. As with all quality reviews. this one (both parts) was both informative and educational. 5/5
@KieranVentriloquist - well you could but you'd be daf to cos if you cant adjust balance of individual channels to the monitor send then. hence one uses the uax's - monitor mixes on this scale dont need messing with once set - yes u could use the fx-sends also for monitoring but remembering they are poost-fade so will be effected by any channel fader levels, hence one usualy uses post-fade sends for monitoring cos they never get effected by channel fader levels
think might upgrade to this mixer soonlike. as borat would say, vERY Nice! look forward to watching more videos, and checking out the website, thanks and rock on!!!
if it's good out of the box and doesnt have any manufacturing flaws then they are decently made for the money, and yes they sound fine, i'd do live gigs with one no problems as long as it was flightcased. Remember the price when evaluating this product and for that price it is very good. I cannot say how long they last tho, i've had this one for over a year now but only home use, not gigging.
Greetings bruh , do you mix in the box with this mixer?
the main outs have a different out level to the aux's.. are you running the cables from aux1/2 into xlr inputs or something or do the amps have 1/4" inputs? btw u can use aux1 or aux2 send for the front wedges, no difference
well rhyvven it sounds like your cabling might be suspect? (the actual cable) i dunno you get a strong signal at the amp when you run a cable from the MAIN L/R 1/4" outs? - you should run the floor wedges from AUX1 out - but of course, unless you send some signal into Aux-1 BUS from a chanel you wont hear anything.
Can you use the sub groups for stage monitoring, or does that have to be done from the Aux1/2 sends? Could it be sent through one of the FX channels, without applying one of the FX? - I prefer to use sliders for monitoring, instead of a knob. Thanks
Can you only either have the built in FX at once or AUX working ? Can you not have the built in FX 1and 2 and also 2 more external FX?
i have a problem with mine sx3242fx and is filtering sound when all channels are down when i raise the volume in the main is filtering when all is all the way down.. what should i do..
watch the full length version part-2 towards the end - see the page link in the info box over on the top right of this page
Super super super super video bro
Mic settings
Mic gain settings
en español forfa hace uno en español
Behringers have been known to sound pretty cheap and awful. How is the overall sound of THIS console? Does it seem like this console's construction is rugged or fragile?
Hindi me