Love it. Edgun, always at the cutting edge. The idea of an adaptor, two piece, one screws to the end of your barrel/ shroud, the other piece screws to your mod* both pieces connect together via the quick connect. Sell like hot cakes. * Any mod. Thanks for showing.

Love your honest videos. You say what it is - as it is. 😊👍

@Airbuks

Жыл бұрын

Thx 🙏

Behemoth appears as if it is a great system. Great information and very good presentation Thanks for posting.

@Airbuks

Жыл бұрын

Yes it is a very nice moderator 👌 I would love to see the reflex chamber part to be compatible with a 1/2 unf

That’s a nice clean, compact setup.

@Airbuks

Жыл бұрын

Yes it is

Nice video, would it be possible to do sound test with the other moderators that fit the leshiy

Hi! Thanks to your help, the FX Impact-Behemoth project is finally finished, everything fits together perfectly! Thanks again for your help!

@Airbuks

Жыл бұрын

Awesome 👊 always welcome

@Cheesedrip268

Жыл бұрын

What parts did you get to make it fit on the impact?

@E30Allrad

Жыл бұрын

@@Cheesedrip268 Only the bolt holding the liner had to be modified to have a 14x1.25 thread in the front. The UNF thread protruding from the shroud was turned off and a turned sleeve with a 14x1.25 thread was pressed onto it. The top rail is Kraford and Lypt gigaRail 2. Behemoth's 32cm reflex chamber can be attached to the 700mm tube.

Thank you for sharing

Hi, great and very informative video, thanks for sharing, actually i liked this moderator over all, but like others asked, a sound test would be a very good idea if possible ,... I think Leshiy dose not leave any wishes behind itself .. :)

@Airbuks

Жыл бұрын

Thx , I am planning a video between the original moderator and the behemoth 👍

Спасибо дружище. В твоем видео больше информации чем во многих русских видео)

@Airbuks

Жыл бұрын

Thx 👊

People call it a toy, But Its a very seriouse weapon, I use mine for home defence, and pest control. sometimes at the same time.

@Airbuks

10 ай бұрын

The time these where just toys I long gone 😉

Hi mate, I really enjoy watching your videos which are very informative. I also own Leshiy 2 Limited Edition 5.0 · and therefore I want to ask you what kind of moderator you would use for this Leshiy. Thank you in advance for your advice and I wish you much more success in making these videos.

@Airbuks

Жыл бұрын

For me there are 3 different ones I like on the Leshiy in 30 cal and that’s the new behemoth in the video , the Huma mod 50 and the Donny kit with the big expansion chamber. They all work very well but the cool factor also is important and I will be running the behemoth from now on 😉

Wow nice i like that

Nice video mate! but we need to know if this is quiter then your donnyFl fat boy setup? Keep up the excellent work!

спасибо за видео .

Reminds me of my Huma air modular moderator which is whisper quiet.

@Airbuks

Жыл бұрын

That’s what I meant with other companies using the same tech and have good success with it 😉

@slayer9240

Жыл бұрын

@@Airbuks I did wonder if that's who you meant.

I always love your videos continue your great work.. But I have a small problem.. How good is this product on The report of the airgun.. you didn’t let us know how quiet it is..

@Airbuks

Жыл бұрын

In 2 weeks I can go to the range and I am planning a video combining all the new EDgun accessories incl the test between the original mod and behemoth

@ChuCKwilliams5

Жыл бұрын

That sounds amazing.. Ok Great thanks

Good day, Just a small question. I made a pre-order of this silencer 1.5 month ago and this nothing in my hands. Question is: How did you got your's if there is no option to buy it just to make pre-order and nobody even know when it will be delivered. I made an order in the store you mentioned in your description and on their official home page is the same mentioned that there is nothing in stock only pre-order and they expected the delivery to stock in 1-3 month. Thank you in advance for your prompt answer. Good hunting by the way. Rgds.

@Airbuks

Жыл бұрын

Hi , I contacted them and it seems that the demand is higher then the production. So they are fulfilling the pre orders according to the waiting line .

Please, we,re waiting for the sound comparative!!!! Please don’t forget about us. Cheers.

@Airbuks

Жыл бұрын

I know 🫣 sorry

Mine arrives Wednesday the 23rd.

@Airbuks

Жыл бұрын

👌

Do you find this Tri-lug system quieter than the DonnyFL shroud kit you had previously installed?

@Airbuks

4 ай бұрын

No , but the difference was minimal and I prefer the look of the Behemoth

How does it compare to other moderators on market? I pre-ordered behemoth from edgun west last week. Can't wait to get it. Just hope it is quieter than other mods.

@Airbuks

Жыл бұрын

Hi , i understand the question and that some people are very interested in it but I don’t do comparisons for various different reasons. As it’s not my place to make some companies less good then others while both are very good in fact. I will be making a video soon comparing the original vs the behemoth. But rest assured you won’t regret the behemoth

@champagnemedia8383

Жыл бұрын

@@Airbuks yes I understand and didn't want you to do a video or mention brands. I like all brands on market. Just wanted short answer. Basically, what you mentioned at the end of reply, lol. Keep up the good videos! Thanks

Hi. Thanks for the review. How’s the sound decibel compared to the donnyfl setup you did a video before?

@Airbuks

Жыл бұрын

There is a small improvement with the behemoth of about 2db but both work so well you won’t notice the difference by ear . The action sound is what you actually hear 😉

@tngo54

Жыл бұрын

@@Airbuks thank you for your reply. Really appreciate your info.

@Sniper.71

Жыл бұрын

@@Airbuks 🤣

Le faltó disparar para escuchar la diferencia de sonido entre el moderador original y este nuevo Behemoth.

@Airbuks

Жыл бұрын

English? If you mean a video showing the difference in moderation that will still come

@davidghattas31

Жыл бұрын

@@Airbuks en el mundo hay muchos paises y muchos idiomas y no todo el mundo debe saber ingles, al igual que usted no sabe español, para eso tenemos algunas herramientas como por ejemplo google translator.

@Airbuks

Жыл бұрын

@@davidghattas31 Lo siento señor, no tiene que sentirse ofendido. Estoy feliz de responder a sus preguntas y ayudar, mi canal está orientado al inglés y ese tampoco es mi idioma nativo. No puedo usar el traductor de Google para todos los que me hacen preguntas, eso simplemente llevaría mucho tiempo. Si tienes una pregunta para mí, me parece justo que el que hace la pregunta se tome la molestia de traducirla, ¿correcto?

based here in UK where can this system be purchased from, roughly cost.. very good Video you produced.. Please advise,, Regards Mark

@Airbuks

5 ай бұрын

Thanks for the support! You might wanna look at sportsman gun center UK 🤔

Wondering if you’ve ever tried the Behemoth on one of your FX air rifles? Maybe an idea for a video you could do??

@Airbuks

8 ай бұрын

It is possible to order the tri lug with a 1/2unf connection to mount it to any rifle , but I can’t make the video as I parted ways with the L2

Are you getting the new Huma aluminium trigger frame for your Leshiy?

@Airbuks

Жыл бұрын

Not sure yet 🤔

Unit yg sangat bagus

How did you get the setup that you showed at 8:32 ? That's my ideal setup it doesn't look like you'd have to change out the locking pins? I have the 350mm barrel.

@Airbuks

Жыл бұрын

That’s a custom shroud I made , I also have a video on that 😉

@ADSUPINTHIS

Жыл бұрын

@Airbuks Awesome work. I don't have the talent or the machinery to pull that off. How much would a mod like this cost ? Lol, one can dream.

what is the length of the reflex module for a 350mm barrel kit?

I read that the moderator material lining the sections is Wool Felt.

@Airbuks

Жыл бұрын

Not sure what it is but there is a felt kind of material inside yes 👍

@DobryakDobreyshiy

11 ай бұрын

@@Airbuks EdGun itself said in one of youtube comments, its made out of kevlar, for better durability and longer life time.

Sure would have been cool to hear it shoot a few shots threw the new moderator and than threw the stock moderator. Excellent video though..

@Airbuks

Жыл бұрын

That will happen in a video in a week or 2 as I can’t shoot where I live 😉

Yes the moderator looks great but plz compare it with donny moderators.and let's hear how silent it is from donnys

Does anyone know how the LW barrel shoots with slugs/solids? Over here they only sell the .30 with a LW barrel, no AP barrels

@Airbuks

Жыл бұрын

I had the opportunity to test both , with pellets they performed the same with slugs in my testing ( FX hybrid slugs where the only ones I had ) the Alfa was a touch better

Smoga aja bisa punya snpan impian m3

Hi friend, what this part call..? I really needed one, I like it the small part 2 inch black stuff that has silver ring around connect to the Behemoth..I like to order one for my edgunleshiy2

@Airbuks

8 ай бұрын

Take a look the the EDgun.shop website under the section Behemoth. There a r different options for it so you can make the right choice for you

Think aesthetically it looks better without the extra Picatinny. +you have enough m lock there to add an adaptor if you need to 👍

@Airbuks

Жыл бұрын

True , I just putted it on as it was the only adapter I had free to mount it to my tripod

@eyesintheskies

Жыл бұрын

@@Airbuks still looks great though. I wouldn't mind one but I hear there a bit louder than your average airgun especially at higher power settings. I like the look of the original shroud but does the behemoth make it more backyard friendly?

@Airbuks

Жыл бұрын

@@eyesintheskies due to the short barrel configuration and high regulator pressure they are louder but that’s the same with any brand and short barrels . But as you can see in the video I am shooting a 30cal 44gr at 830fps near to 55 db with the behemoth absolutely backyard friendly 👌

@eyesintheskies

Жыл бұрын

@@Airbuks do you have a decibel reading for it with the factory moderator? I understand it's bound to be louder than others just trying to work out how much! It's hard to tell from videos. It's an expensive gun , I am reluctant to spend the extra on the behemoth if I don't have to!

@Airbuks

Жыл бұрын

@@eyesintheskies hi , yes I have made a video 2 weeks ago testing it with a FB meter

Qua đẹp, nhưng chỉ là ước mơ thôi

Please do a install video on the huma fx crown match grade trigger

@Airbuks

Жыл бұрын

I will talk to Huma 😉👍

@crypto_creep8222

Жыл бұрын

@@Airbuks please there is nothing fornthe English speaking market. I fpund something on a Dutch forum but for obvious reasons i could not read it lol.

Hello! What is the diameter of the reflex chamber? I'm planning to mount it on an FX Impact, but it would be nice to know if it will fit next to the air tank.

@Airbuks

Жыл бұрын

Hi , I am not sure but I think it’s about 50mm , I don’t have the opportunity to measure it now as I am away from home at the F1 GP off Belgium 😉

@E30Allrad

Жыл бұрын

@@Airbuks Thanks and have fun! When you get home and have a chance, please measure the diameter of the reflex shroud, because it depends on whether I replace the FatBoy 2 or not. (video 5:08..) If there is any information about the length of the reflex shrouds, I would also be interested, because compared to the possibilities, I would install the longest one...

@Airbuks

Жыл бұрын

@@E30Allrad it was fenomenale! Thx I will be back on Tuesday evening, remind me then please 😉

@E30Allrad

Жыл бұрын

@@Airbuks Thanks in advance!

@E30Allrad

Жыл бұрын

@@Airbuks Hi! I hope you got home safely, so I'm going to bother you with the size of the reflex chamber. I hope its diameter is not larger than 32 mm, because then the whole project in this configuration is off... Greetings!

How to order sir?

How many Baffles can the suppressor can take ?

@Airbuks

8 ай бұрын

In theory as many as you want

@hunterx2210

8 ай бұрын

I do not sure if anything beyond 7, if it would decrease the velocity@@Airbuks

@Airbuks

8 ай бұрын

@@hunterx2210 I found anything above 5 it doesn’t make any sound difference. Not sure if it reduces velocity 🤔

How much is the price of edgun lishey2 sir

@Airbuks

Жыл бұрын

For this you need to check your local dealer as the prices are different in different parts of the world

How can i buy that leshiy 2 bro...i'm from the philippine..

@Airbuks

Жыл бұрын

I don’t know 🤷‍♂️

Hello. how many db the first doesn't matter. just felt in an aluminum tube. optically not my taste

@Airbuks

Жыл бұрын

I will be testing that in a future video when I get the opportunity to go to the range

@sonaxtom2417

Жыл бұрын

@@Airbuks ok

hi, friend if wanted to buy a modular to putting 2 my Leshiy do I have to buy a complete with hand guard or I can used the one I hab before…? give me ideas.Did you buy from huma, or airgun 101..?

@Airbuks

Жыл бұрын

It depends on different thing if it would fit or not but take a look at the website www.edgunleshiy.shop for different options.

Ou puis je acheter le modérateur ?

@Airbuks

Жыл бұрын

Links are in the video description 😉

Just adding more weight to my edc I don’t want to carry around.

@Airbuks

Жыл бұрын

It’s not that heavy , but indeed you can have a much smaller lighter setup if you need it . But suppression will be less

@demomboy6

Жыл бұрын

I fully disagree and encourage you to look at the STO baffles. You might change your mind.

@Airbuks

Жыл бұрын

@@demomboy6 there are many good options in different styles that work very well ( I have different ones from different manufacturers 😉) but they all add weight to the setup . In this case my Leshiy is a 350mm 30cal shooting 44gr at 830fps . To make it quiet i need a little bigger setup to Handel the amount of air . With a smaller caliber you can deal with a smaller mod

cây này giá bao nhiêu tiền việt nam

Gassssssp, nice things again, but the whole Leshiy, including according stuff is absolutely opverpricccccccccced ....😥😥

@Airbuks

Жыл бұрын

Yes that’s the only downside that it’s expensive

I do not need it. My Leshiy2 performs flawless from day one1

@Airbuks

8 ай бұрын

There are always options 😉

with the picatinny rail its a whole different system, it wont be as good as this one.

@Airbuks

Жыл бұрын

What do you mean ? Picatinny on the handguard ?

Waste of time repeating taking it apart and no sound comparison

Where are the sound values? How effective is in reducing the noise?

@Airbuks

Жыл бұрын

Check the next video on my channel 😉

Awsome system. You come out with the best gadgets. You should rename your channel to “Gadget Man”. “Air Gun Gadgets” “Gadget Fanatic” No wait. “Gadget Guru”

@Airbuks

Жыл бұрын

🤣 thx for the suggestion 👍

Not informative at all.