No video

Beginner guide to one piece around the world 16x19 with 2 skips

in this video I demonstrate a one piece around the world on a 16x19 racquet with 2 skipped grommets at the head.
In the video while transitioning the clamp from the main to the bottom cross, I accidently place the clamp back on the main. It should go onto the cross. I was too focused on talking and not on procedure.

Пікірлер: 15

  • @anatolyzelepouga8252
    @anatolyzelepouga82522 жыл бұрын

    Great video, video quality is great. Keep up the great work!

  • @Isaac-qg4sh
    @Isaac-qg4sh2 жыл бұрын

    Thanks for the video!!!!! Also, the lighting is great!!

  • @benjaminjensen111
    @benjaminjensen11127 күн бұрын

    Hi Herb. Why dont you use a starting block for protecting the outside frame and 2 cm of the string for the tie off?

  • @HerbBaird

    @HerbBaird

    26 күн бұрын

    @@benjaminjensen111 I do not leave the clamp on long enough to damage the string, and the clamp is against the head guard. It's not going to damage the frame or scratch the paint.

  • @benjaminjensen111
    @benjaminjensen11127 күн бұрын

    Hi. When you meassure on short side the last mains length 1 1/2 (from 7 to 8 1/2) is that to reach the stringer? how much length to string long side incl. the 8 + 1 mains ?

  • @HerbBaird

    @HerbBaird

    26 күн бұрын

    @benjaminjensen111 Yes. Don't know. The long side is going to have almost 30 feet of string.

  • @federicoinnocente
    @federicoinnocente4 ай бұрын

    At 9:16 there is a mistake. You put the clamp on the main while you should have put it on the cross that you had just tensioned

  • @HerbBaird

    @HerbBaird

    4 ай бұрын

    I sure did. I've never noticed. That is what happens when I try and talk and string at the same time.

  • @federicoinnocente

    @federicoinnocente

    4 ай бұрын

    @@HerbBaird it happens, i can understand talking + working is not easy

  • @kdoublec973
    @kdoublec973 Жыл бұрын

    I love your content. May I ask why you pull three then six mains? Wouldn’t it be easier on the frame to alternate? Actually, I’ve been doing what Tennis Spin channel does which is 3 mains on one side, then 4 on the other then alternate with 2 until done. Thanks

  • @HerbBaird

    @HerbBaird

    Жыл бұрын

    There are several techniques for just stringing the mains. Tennis Spin uses the method that the Yonex stringing team uses which was adapted from badminton if I am not mistaken. Really have to be careful with badminton racquets. Once you have pulled an equal number of strings on both sides, it does not matter which side you then pull the next strings, as long as you are distributing force. Watch videos of the stringing rooms for Wimbledon, AO, US Open, French Open, etc that are not run by the Yonex team and that will more represent the techniques that I use.

  • @kdoublec973

    @kdoublec973

    Жыл бұрын

    @@HerbBaird ok thank you.

  • @MW-ss6vb
    @MW-ss6vb Жыл бұрын

    That's box stringing, not ATW

  • @HerbBaird

    @HerbBaird

    Жыл бұрын

    No. A box pattern for this racquet consists of stringing 11 center mains, then the bottom cross. From there you string main, top cross, main, bottom cross, main, top cross, main, bottom cross, main, top cross. The string looks like a box. 3 crosses at the head and 3 crosses at the throat. Then you finish the remainder of the crosses from head down. An around the world pattern consist of stringing a single bottom cross final main, and then completing the crosses head down. Here are a couple of videos for reference. kzread.info/dash/bejne/npl6j5OwisirlbA.html kzread.info/dash/bejne/mol4sZNpp6XWndI.html