BBS RS BUILD IN 10 MINUTES (FROM JUNK TO NEW)
Автокөліктер мен көлік құралдары
I had these 4 faces of BBS RS sitting for almost 5 years and couldn't figure out what to do with them since they were so damaged. I had no parts with them, only the faces. I decided to start building them 6 months ago, acquiring parts, fixing the issues by welding and machinning to finally have my dream set of wheels.
Faces are RS043 (30 bolts)
Step up kit from 15 to 16in
Outer Lips are 16x0.5
Inner Barrel are 16x6.0
1/3 billet hex
New BBS logo
New Bolt, Nuts and Valves
Пікірлер: 53
Outstanding!!!!!
Absolutly stunning, work and finish!
Excellent workmanship!! Wheels look great! Pretty sure the face of the wheel goes in-between the barrel and the lip… unless you’re looking to fit skinnier tires than usual
Such a classic wheel.
I liked the: BMW Cover -> Straight to trash XD Nice job.
@AntoineMk1
Жыл бұрын
Ahaha exactement :p thanks!!
Solide, je suis dans le processus de refinir les miennes aussi. Ton vidéo donne de la motivation à les compléter quand ça me rappel le produit fini!! Good Job
amazing work ;D
Magnifique !! 😍
Beau travail Antoine
Good 👍🏻 job
Damn I have the same color coming in Bmw silver with red and silver bbs cap .. can’t wait .. watched this a million times and good to know it will look good coincidence that I saw it’s also bmw silver
Je suis sans mots mon gars .. wooow !!!!! 😈😍🤟
C’estttt chauuuudddddddddd!!!!! ❤️🔥❤️🔥
Super nice bro
🤩🤩🤩🤩🤩🤩🤩🤩🤩😍😍😍😍😍c est beau !👏
They look great, but I thought the centers were supposed to go between the halves of the rim, not outside.
😍
properly done sir!! 👍
Where are you? I need some BBS RS centre weaves welded just like that 😂👍🏻 good job
Do you need some kind of sealant in between?
I NEEEEEED to get a LIST of all these SweeeeT INSTRUMENTALS🤪🤪🤪like Gadt Daaymn
Interesant imi place, chiar dacă nu sunt de acord cu cârpeala sudură
where/how did you order the rs centers like you did there >>? looking for a set of 15" bbs rs centers can you point me in right direction?
protect your wheels
Do you give up any structural strength putting the centers in front of the lips rather than oem placement? Beautiful work 👍👍🍺🍺
@RichDasix
Жыл бұрын
no
@TBendez
Жыл бұрын
@@RichDasix Well, no to your no. You are now putting load on to the screws, without the support of the facias lip towards the barrel/rim. I believe most of the forces are going to work pushing the wheel out, towards the bolt heads.
@kennethl2423
6 ай бұрын
I was wondering the same thing except about using welding as infill for the old bolt patterns. This is a good point though, I thought it looked funny but he's showing off his work by putting the centre on the outside so I respect that
Wowwowwowwow🌽👌👌🍺
Where did you get the barrels and the outer lip from??
@AntoineMk1
Жыл бұрын
Srr hardware website
Could I machine these same rims for an 09 saab 9 5?
Were did you find the new emblem?
@AntoineMk1
Жыл бұрын
Check out Srr hardware
comment passe de mag fini a 500 a de beau mag a 3000 belle job mon Antoine
Isn't the outer lip designed to go on the outside? Isnt the bmw silver part supposed to be in between?
@AntoineMk1
Жыл бұрын
You can do it both ways with that outer lip/inner barrel kit
@theowarmelink7347
Жыл бұрын
@@AntoineMk1 Always thought putting the inserts on front was only done on 2piece (replica's) rims. Anyway is a creative way to change the ET-value and narrow the rims.
Ставил бы уже через переходники, заваривать и сверлить новые отверстия, ну незнаю.
no sealant?
@AntoineMk1
Жыл бұрын
Of course, I just did not film it.
@AntoineMk1
Жыл бұрын
Of course, I just did not film it.
@AntoineMk1
Жыл бұрын
Of course, I just did not film it.
If you out the barrel then the face and on to lf the face you put the lip would look wayyyyy better
Yes tgey r ik im crios wad using red
Auch y yo buscando esos en 5 en 100 para mi jetta Mk4 😭 y este los vuelve de 4 pernos nooooooo muy jodido asi
Das wäre mir aber zu gefährlich damit zu fahren.
Nooooooooooooo, all that work then you surface mount them!
@sh60guy25
Жыл бұрын
Same thing I was thinking!
@crunchermuncher93
Ай бұрын
Boring, same shit. Upside down looks alot better
You do relies you built those together wrong? Terrible.
@jackpalmer9066
Ай бұрын
Never heard of high offset face mounted split wheels ??