Get this man some support so he can build. This channels so underrated

@DktheWelder

8 ай бұрын

Yes!

You're such a kiwi! A bloke down the road gave me this part, a guy from work gave me the mufflers, bare foot working and toasty sandwich maker. Classic. I really enjoy your style.

@DktheWelder

7 ай бұрын

Haha thanks ! I don’t even think about it just how it seems to happen

Funny grind hard is building a off-road bike now

Instead of having side wheels dropping down from the side I’ve always imagined the wheels of such a style of inclosed cockpit motorbike to come sliding out of the frame sideways under a downward angle, driven by a single crank crankshaft. Imagine a V-twin cilinder like a Harley Davidson but installed upside down. Now imagine your v-twin engine upside down and in the “bottom stroke” position the “side wheels” would be pulled up into the frame and on the top dead center position they would be sliding out of a pivoting “tube” with which you can steer their angle as they come out of the frame (depending on the point they’re pivoting) and be touching the ground keeping the bike upright.

@DktheWelder

7 ай бұрын

I did think of making something like that but I am actually sick of working on the fold down wheels haha

Awesome.

One of the most helpful sponsorship Ive seen in a while. I'm going to save up for one I think

@DktheWelder

8 ай бұрын

I know a sponsor that is actually getting used!

Can't wait to see it finished!

@DktheWelder

8 ай бұрын

Takes a lot of time as you know 👍

Your weather looks beautiful. We got two foot of snow and cold cold. I would pay to be able to do projects year round

@DktheWelder

8 ай бұрын

We are coming into summer and the weather is great! Had a very rainy winter but doesn’t snow here

Montreal is still watching and saying thanks for your upload . Can't wait to see this bad unit ripping !

@DktheWelder

8 ай бұрын

Thanks for watching, I am looking forward to the first ride I hope it works out

Subbed! That's nuts.

@DktheWelder

7 ай бұрын

Thanks 👍

I like that you show us a bit of the problem solving. Thanks for a nice video.

@DktheWelder

8 ай бұрын

No problem!

I admire your ingenuity, this is amazing.

Haha nice bro. I like grind hard I would not be at all surprised if they watched your content for 'inspiration' it's quality cheers

@DktheWelder

8 ай бұрын

They have commented on one of my videos, but mine haven’t been that popular lately

@Opalcutspeter

8 ай бұрын

@DktheWelder I don't think it will take much for you to take off mate, keep at it 👍

Great to see progress on this 👍👍

@DktheWelder

8 ай бұрын

You and me both!

Great progress Man !!! Looking great 😉😎

the bike is going to be a treat to use, nice one.

@DktheWelder

7 ай бұрын

I hope so 👍

This thing is a mean, Mother Lover!

Another cool vid Dan, Cant wait to see it go👍

Total solution based pile of awesome mate farken luv it

Love the Zero bucks build - and this clearly has nothing in common with grind hards monster chop except the both have 2 wheels !!- the idea theres any copying is absurd!

@DktheWelder

8 ай бұрын

I think it is cool we are working on something similar 👍

@bloodsweatandtearsforeverl9833

7 ай бұрын

Who said it's a zero bucks build, he's using new metal, you'd be surprised how much money and time goes into builds like that, it takes a artist with a lot of patience

Junkyard wars

@DktheWelder

7 ай бұрын

Most of the parts are from the scrap bin!

I like the exhaust, makes it look mean

@DktheWelder

8 ай бұрын

Thanks going to start the other side soon

You crazy, I like it.

@DktheWelder

8 ай бұрын

Thanks 👍

Mate, That’s looking really awesome 👌 Great work, keep it up Cheers 🍻

@DktheWelder

7 ай бұрын

Thanks 👍

I'm having so many issues with 3d printing, sometimes they fail, sometimes they don't, but no matter the settings they always turn out quite bad, weak and stringy, terrible first layer and just a bunch of issues

@brucebaxter6923

8 ай бұрын

Ok. You don’t want to hear this ,but …… Basic settings. Backlash Leveling Clean build plate (windex) Fresh nozzle Fresh filament, good quality and dry. Bake it in your oven at 80-120 deg for a couple of hours. Make a 10mm cube and check extrusion ratio 20mm square to check height of first layer, you want a flat area not a pliers field or a pushed grader look.

@hannesnilsstrom2613

8 ай бұрын

@@brucebaxter6923 that was helpful thank you!

@brucebaxter6923

8 ай бұрын

@@hannesnilsstrom2613 I hope so. If it doesn’t fix it at least you know everything else is right. After you do that you can play with speeds heat and retract distance. A worn nozzle or wet cheap filament is 90% of problems

@hannesnilsstrom2613

8 ай бұрын

@@brucebaxter6923 the thing is everything is new only used a couple times, just never quite got it to work right, tried leveling, z-offset, different filament, temp setting,retraction and so on, sometimes it turns out ok but most of the time fails, it's an anycubic kobra go btw

@brucebaxter6923

8 ай бұрын

@@hannesnilsstrom2613 If you want I can work with you to get it fixed.

Had to laugh. Right at the end, when you were sitting in it and you tipped it over. That angle of the camera instantly made me think of the grind hard plumbing company's build. And I said to myself that it's crazy that their build looks similar. Then you cut to yourself talking about them and not copying your build, lol. I never would have thought there copying it. There are so many channels on here that it's bound to happen where more than 1 channel builds something that's alike. Hope they didn't get too much criticism on their build. I love it all. It shows off your awesome skills. I bet it's so frustrating to have to keep redoing the dam tip over wheel assembly. I'm glad you don't just cut it out, and Boom worked first try. It's nice to see that we're all human and some ideas just don't work like we dream up! I've done it myself!! I just love your channel man! I can't wait to see this thing ripping through the outback!!

@DktheWelder

8 ай бұрын

I actually tried to copy their thumbnail with that camera angle haha! They do really good production and have about 4 guys helping and they know what they are doing for KZread

@drewanderson8279

8 ай бұрын

@DktheWelder it's all awesome man!! Thank you for sharing a small part of your life with the world!much love from indiana usa

Is this a bike

Your bat buggys forsale on facebook again aye. Still looking the same im surprised it hasnt been chopped up for the motor yet.

@DktheWelder

8 ай бұрын

I don’t think it has even been driven much , would like to see it finished

@brucebaxter6923

8 ай бұрын

@@DktheWelderare you finished with those motors I gave you?

@kingmarz3635

8 ай бұрын

@@brucebaxter6923 I hope you’re not expecting them back! This isn’t india

@brucebaxter6923

8 ай бұрын

@@kingmarz3635 Lol.

@brucebaxter6923

8 ай бұрын

@@kingmarz3635 Hoeing they would make another appearance.

Try hard not plumbers got nothin on DK

@DktheWelder

8 ай бұрын

They got the views and budget haha , they seem like a great bunch of guys too

@skasev

7 ай бұрын

@@DktheWelder they became all about that “hype culture” sensationalising everything. Your nonchalant vids are informative and excellent. Just landed in Queenstown, any hot tips?

@DktheWelder

7 ай бұрын

@@skasev I’m in New Zealand, yes I don’t really get into the hype stuff haha

GHPC copied 😅