Thanks for the question, Most Bandit chippers are fitted with 'Auto Feed'. The 1590XP has many engine options, but most are ordered with engines around 140hp. To chip a 16 inch++ (40cm++) log continuously the chipper will need over 300hp....The auto feed senses the engine rpm and when that rpm drops below a set point the chipper infeed stops feeding the wood until the engine rpm recover, then the infeed starts again. Smooth, safe and efficient chipping.

You do that you need a Bandit Beast Recycler. They produce sawdust if need be and will tolerate nails. Perfect for pallets! Thanks for the question.

I could watch this all day.

That is insane.. Those some big ass Trees!!!

In the early 70's I used a chipper called a "Wood Chuck". They were incredibly noisy, and dangerous. There were several reports of workers being pulled into them. This seems much nicer.

It's cute for a little chipper . You need to see some of the huge commercial chippers at work ! Woo Hoo here in the east and I'm sure other parts of the U.S. They use them in Bio electric power plants . Instead of coal , gas , oil. They also make bark mulch for landscaping . I'm glad they found a use for the tops of trees . As loggers left an awful mess in the woods .

Bandit supply the 1590 with engines up to 173hp. The one in the video is only 142hp. Even with 173hp the engine will lug down on big wood. The Auto Feed system will start/stop the feed so that the engine can recover it's revs and then take another bite. If you want to chip 18" logs continually without lugging down we need to fit about 450hp to the 1590...!!!

Thank you. To answer your question - 100% yes! The Bandit machines work very well with many happy customers in Australia and South Africa - both of which have the driest and hardest hardwoods in the world. Northern Australia also has the tropical hardwoods. The machines will have no issues processing tropical hardwoods.

Had a machine like that on my farm a few months ago that I rented. It had a huge dieselmotor in it and it was always fun to see how big of a trunk it would handle lol

Hi Lumberboy, Yes Bandit do have great Dealers in Canada and I can arrange one of them to quote a machine for you, no problem. KZread wont allow me to post my email address here, so please go to our website as shown at the description of this video (above) and fill out your contact details on the 'contact us' page and I will pass your info on to the local Canadian Dealer. Thanks very much. Mark.

Why do I love watching chippers munch wood so much?

This is what my crew has run for alittle over a year. It hasn't let us down yet

This is what he needed in Fargo

Super excited. Very good

The wood chips are being used globally as "Biomass" - meaning they are burnt in industrial boilers and the heat is used to generate electricity and/or heat. If you Google Biomass there is a wealth of info. Thanks!

Thanks for the questions - No, these types of machines will not shred tyres.....Tyres are amazingly tough and have a lot of steel in the holding them together. Chippers like the Bandit 1590XP have sharp steel cutter knives moving at high speed and will not tolerate steel...

I'd love to see the internal blades/gears on that thing. holy crap!

@maudepotvin8660

10 жыл бұрын

It's a huge flywheel whit a blade on it just like a culinar robot ... but massive !

Very nice!! thank you very much my friend!!!

How much wood can a woodchuck chuck.

You never been around wood grinders or sawmills much I would guess... wood is pretty tough.. and the system to back out of a grind and restart is pretty ingenious ..

we just got the track version of this machine in work, brand new. cant wait to use it :)

The hydraulic feed makes all the difference in the world. I have an old Wayne 12" chipper with a Chrysler 318 V8 without a feed. Everything you put in gets sucked up at full speed. I just don't feel comfortable putting anything over 5 inches in diameter. Hell, anything over that is firewood.

Wow amazing machines . I would not want to get caught ( snagged ) on a tree and drug into that tunnel of no return. Wonderfull machines

I have the very same chipper *and* I heat with wood -- so I'm right there with you! As if that weren't enough, my name is "Bryan" -- spelled with a "y" and everything! Separated at birth or something here. Spooky. But yeah, the hydraulic feed rollers make it so that you don't have to cut your tree waste to length. Just get it up to the rollers and let the machine do the work. Perfect for crews since it allows them to spend fewer hours running saws and more time being productive.

great looking and working machine.

no, not always, the wood chips produce a fine mulch for flower beds as well as gardens, i've also heard that a good bed of wood chips will kill everything underneath it, making it a nice alternative to herbicides. get the right kind of wood to mulch and it can also make a nice natural pesticide for up against the foundation of your house. in the end though it's what you do with it that makes it a waste of wood or not.

It plays this metal music when wood chipping :-)

OK! Thanks! I just had an impression that the chips often "go to the bushes" on the road side.

great machine! much stronger than mine!

just wow !

amazing which country

I'm so impressed ,I'm gonna email the show How it's made. I'm dying to see what's inside this beast. Eats trees 🌲 like Nom,Nom,Nom!

Wow! That's impressive. Do you have a video showing the internal workings of that machine? Thanks.

very good

this is amazing.

Why doesn't the video show loading the trees? I know that you do not manually pick them up and start to feed them in.

Wow.... Amazing

They're also really good for mulching. Not to mention some trees are just bad for fireplaces.

Works great with built-in stereo.

Very good straw briquetting press. Masina de brichetat paie

We can paint your next Bandit literally any colour you want! Standard colours are green, black, white, orange, bright yellow or "Cat" yellow. Thanks!

Why is it with most of the big trees in this video do they stop for like 3 seconds and then continue cutting it up then stop again is that so they don't put stress on the engine or what.

If the feed would have been a little slower at that big wood in the near end it feels like it would have been able to take it all in one bite.

Хорошая машинка для деревообработки!

Looked like most of the wood being chipped was pine (softwood), how would it handle a hardwood such as ironbark?

At first I thought I was such a man by my abilities to down a beer in 4.8 seconds, win 3 annual wings competitions in a row, and grow a beard but now watching this I was completely wrong. My balls dropped 3 inches after watching this.

just watching this makes me happy, nice chipper

awesome performance superb chipper.Just seemed a waste to blow large diameter trunks like that into the bush ,surely it would be better as firewood logs ...........and also less stress on the chipper. Expect its just a demo to show performance.Very impressive,thanks for posting

BENDIT MODEL 1590 1590XP 17 CAPACITY DRUM CHIPPER OUR MOST POPULAR CASTEL

So cool

IMPRESSIONANTE!

I wonder what kind of quality the blades inside is made of and how often you need to send it in for sharpening, and how that is done.

Wow! very excellent chipper model and how is goes chipper maitainace,how many time given outputs in tons.thanks..

What a beast of a macine I work myself to the shredder aleen which is not great as that in there is what bin beast super cool but on the other hand I think it's a shame because you can also use the tribes in the open stop fire but must admit that this shredder I see there now best go tribes

How long would it take to fill up the whole back carriage of a truck and how much could you sell the bark for?

Oooo nom nom nom nom nom!! This machines are awesome

What is the fuel consumption of this kind of machine about 9 inch diameter maybe 110 hp or so?

why is there no jacks on the back of the trailer

so good...simple & good for clean country

I agree. The smaller trees would've been great for biomass, but some of the bigger trees would've given someone great furniture without having to chop another tree somewhere else. The Bandit, though, that's something else. A nicely engineered product. I like how it pauses now and then to cope with having a smaller engine. Economical.

No problem Oilman, anytime!

lol that could probably chip our chipper

wow I use a Timber wolf 150 I thought that 9 inch capacity was allot!

What you just chopped would heat my house & shed all winter.

Thanks, please do a KZread search for "bandit chippers changing/servicing knives". A few more videos are there from our Service Team. Thanks

potential firewood there

This glorious!

Ok...yes....from indonesia

Wow good

Forgot to Paint Both sides of the Feed Rollers

I just wonder why would sawdust or woodchips be more valuable than, say, fireplace wood? This is such a good wood being chipped! Gives me an eyesore to watch. Isn't this waste? Just asking... What's the deal here?

Beast chipper.

can this machine produce fine saw dust from used/recycled wood for eg pallets (some pallets may have nails)

I'm sure we can hook you up with something. Pls go to Contact Us page on our website (address at start of video description) send us your details and we will be in touch. Thanks!

Nice

will it blend ?

How will we get oxygen when we cutting the tree

nice

que costo tiene para colombia santander bucaramanga

What an awesome chipper, shame about all those potential logs!

om nom nom nom nom...

I want one TOO!

Very impressive,,, we're looking for another chipper,,,, Something heavy duty,,, this fits the bill,,, Any distributors in Canada? Price? shipping?

Please read the explanation above!!!!!!!!!

BRAVO! I have subscribed.

Nice mechin

This is a typo however. This is a 15" chipper NOT AN 18"

Aren't all self feeders disc chippers?

nice machine what is the price

+david griffin I think the same thing, only that I wish that they would show us when you are done with all the wood chips!!!

If I could only justify the purchase

Lema : \"Devoramos sua arvore em segundos :D " Motto: \ "devour your tree in seconds: D"

works well

now thats tree eating monster.

super

Surely there is better use of cut down trees, than turn them into chipping?

Don't forget! This is our planet.

we need addepte the tech.

Just add 2 eyes on top and you got yourself the Tree Monster!

Намного лучше чем сжигать !