Fun video. Exceptional directing.

Ooh, a Bambu! Definitely not jealous ;) Hope you enjoy it, and I can't wait to see your shop!

@mayhemsmiley

15 күн бұрын

Thanks Gabriel, me too, excited and there's just isn't enough hours in the day to play :)

So cool you got a bambu, i am still waiting for my ban to lift to be able to order one with some abusive vouchers 🤣🤣. Very cool tips regarding the color swap, looking forward to see your next prints! Happy printing!

@mayhemsmiley

15 күн бұрын

Ban, The Catfather got banned, what did you do LOL hehehe just having some fun :)

@TheCatFather01

15 күн бұрын

@@mayhemsmiley abused the points system, when you had to have models downloaded in order to get points. I still have around 8000 points, but am banned until January 25 😅

@mayhemsmiley

14 күн бұрын

@@TheCatFather01 Whoa that's a long ban, sorry to hear that.

BUELL

Adrian, i've dumped the AC printer, Dumping the Creality printers as i'm waiting for my 2nd P1S. If you want to try some silk, Set Outerwall speed to 40 & in acceleration set Normal Printing to 5000 and outer wall to 3000 & you will be Amazed at the Quality and sheen from Silk Filament! :)

@mayhemsmiley

15 күн бұрын

Thanks for sharing I'm looking forward to many adventures

....Im glad you are happy so far with your PS1 uuuuh P1S!😊 The flushing volume was my first thought, you gotta deffo tweak that stuff for each color, especially going from dark to light. The auto calculated values are a good point to start at, but not always enough. You can minimize waste by flushing into the objects supports and infill if you didnt notice/try the setting yet. Also if you can, make use of the variable layer height feature in Orca and make the layers with color switches as thick as possible so you dont have to flush as often. And about the noise: I got this thing in my 1 room appartment and yes, its not quiet, BUT its also not slow!! If you turn down the acelleration and print at more reasonable (and consitent) speeds like 200mm/s, youll start to hear the external fan more then anything. I dont know about the P1S driver board, but my X1Cs turned out to be capable of letting me just buy an original replacement AUX fan, rip the completely useless but only half as strong chamber fan out and through its filter slot route the uncut wire to that awesome "Bambu Lab P1 X1 Dual Aux Fan/Bento Box 7/28 Updated" on Printables. Its been running totally fine for half a year like that, just doesnt get the full 100% juice the other one gets: But thats the cool thing now (ba-dum-tzzzz)😅 I can set em both to 50%, not hear em anymore at all and still get more even part cooling across the whole plate. The are some dead spots with just the one original fan.... I can highly recommend this filter/fan duct combination. It filters just as good as any other Bento Box variant and with the P1S having the same chamber fan, Im sure it would work like on mine without needing to solder together a cable to grab the PWM signal from the board and juice from the PSU. And since you are just plugging a potentially more capable but still original fan into the board without any further modifications, I wouldnt be concerned about warranty either. The board has to limit what it can give out and turn off when its too much. You are just using 100% of its capabilities more often then before while getting a slightly less performing fan, which with this duckt still ends up equally strong as the stock one. And about the build plate: I only the smooth PEI with Engineering plate on the back, so can only comment on those, but I found that first of all dollar store glue sticks are just as good as original Bambu glue and actually you usually prefer a clean plate over the use of glue. Actually actually, the glue is more supposed to be a boundary layer to LOWER adheasion😅😅😅 I hope any of this was of any value to you and/or anyone else reading, wish you lots of fun with your machine!!😊

@mayhemsmiley

14 күн бұрын

Wow Wasserman, thanks for the wealth of info and for sharing it here where like you said it can help others too. I need more free time for this addiction hehehehe

@Wassermelonenbaum

14 күн бұрын

​@@mayhemsmileyYou helped me out back then with ye ole Kobra, now Im glad to be able to give some back! ;)

put it in "silent" mode. you cant hear it

@mayhemsmiley

13 күн бұрын

Dude, I thought you were winding me up a bit, but I see there is a silent mode. I will check it out, can't at the moment because it's printing, but I will today. I imagine it must slow the printer down some, but I don't mind. Thank you very much :)

So its kobra exit😂

@mayhemsmiley

14 күн бұрын

🤣 Not completely, but I will admit I'm a little obsessed again at the moment hehehe

@stephsunny

14 күн бұрын

@@mayhemsmiley the speed and quality will set your kobra's at dust. I have a Kobra Go. And now a A1mini .... 2weeks in box. But still not tested.... I hate setting up again lol

@mayhemsmiley

14 күн бұрын

@@stephsunny This thing is amazing, learning every day how fantastic the quality of prints. Ran into a little challenge, but overcame it quickly :)

You sound like you need a drink or caffeine......

@mayhemsmiley

14 күн бұрын

🤣 LOL is that a good thing or a bad thing LOL I can be wired for sound sometimes 😁

Post your makerworld account so i can send you boost tokens, dont really use them and its pity not to support someone as you

@mayhemsmiley

15 күн бұрын

Thanks for being so awesome like always Catfather