We've never stopped manufacturing the Baldor-Reliance NEMA motor. Take a look at what new is happening at ABB: kzread.info/dash/bejne/f6Ci1Zmfh9fTc7g.html

@delwarchowdhury39

Жыл бұрын

Þtþ quo. no

It is always amazing to watch videos such as yours. I love all things mechanical and to see the level of knowledge, effort, and finances that exists behind this operation is truly amazing.

Baldor motors are truly first class as an electrical engineer, I,strongly recommend them to my clients

@jiarulsardar486

5 жыл бұрын

David Salny jiyrul

@ryanleese1240

3 жыл бұрын

Standard, easy repair, parts readily available.

Extremely impressive and informative video. My gratitude to BALDOR management.

After seeing this your motors are a steal at any price. Great work.

It's just amazing to see how complicated and interesting and truly entertaining manufacturing is. Glad to see this going on in the good old USA!

@ABBMotorsandDrivesUS

6 жыл бұрын

Thanks for watching! As ABB, we continue to manufacture, design and market Baldor-Reliance motors and Dodge mechanical power transmission products from 15 U.S. manufacturing locations - 60 U.S. locations total across all of our portfolio. ABB has invested over $13 billion in the U.S. over the past 10 years; this is our largest market.

@ABBMotorsandDrivesUS

6 жыл бұрын

Our customers can count on us to provide local support, backed by pioneering ABB technology and a global, connected footprint to ensure we partner with them wherever they may be. We're committed to doing what's best for the customer. Take a look at this video: kzread.info/dash/bejne/ZqOilq5rmaXLodY.html

@wasimsajjad7525

5 жыл бұрын

Truly

@stann69

4 жыл бұрын

@@ABBMotorsandDrivesUS Would you lower your product prices after collaboration with reliance?

Looks like a really high quality product, well done!

This is amongst the best production techniques of Induction motors that I have ever seen. I noticed that when the motor was tested it was elevated from the table and that little sway proves the balancing, both electrically and mechanically was perfect. My congratulations.

Thanks for uploading. I've used many of their motors,shipboard through the years,mostly 3 ph. as replacements.Never had a problem with them.

@umarsinhsodha1702

3 жыл бұрын

This company motar is good I'm rewaindar

Over 90% of Baldor-Reliance motors meet the Buy American Act: bit.ly/3xDn5NE

I own a commercial laundry company in Anchorage Alaska and know your motors are top notch first hand. Thank you for your dedication to a great product!

@mihovillmisha9885

3 жыл бұрын

Is it Snow White laundry

@goshnodo

3 жыл бұрын

@@mihovillmisha9885 hell no.

@mihovillmisha9885

3 жыл бұрын

@@goshnodo I am a master electrician and Snow white was my first job in Alaska in 1985. I have worked with Baldor motors in Alaska in fish camps and north slope for about 30 years. Nothing special, they do the job. But as you can see they were civilian close and no industrial umifotms like true professionals. Beacuse today you are machine operator not a journeyman.

@goshnodo

Жыл бұрын

@@mihovillmisha9885 Not sure I follow however glad to meet you!

Impressive motor plant,well-organized and proper handled each step...good job.

I've seen a lot of your motors in heavy use at various facilities. A great product.

Well done. This is an interesting video. A lot of information I learnt about how induction motor is created. That induction motor is really big and its look very good quality.

@007hasan

5 жыл бұрын

Thanks for watching videos. Another one largest Motor manufacturing company I did visited to Taiwan in 2009. Company name is TATUNG origin made by Taiwan. Which is no one brand in Taiwan also famous in the world. So you may can visit to that motor manufacturing company if you interestfill ?

What a great recommendation to have after almost 9 years.

Fantastic video, great education. God Bless those workers and BALDOR.

Fantastic, the way of production and the simulations on the motors. Who studies engineering loves this! Very cool

I appreciated to you about manufactured the motors and thanks to all ...

Baldore is really doing a great and marvelous job.

@Orgakoyd

2 жыл бұрын

A tremendous job!

Good to know Baldor is still around...They make one workhorse of an industrial motor...Years ago, I once worked in a production machine shop that still had a few old engine and turret lathes for secondary operations that needed main drive motor replacement... "Get that whatever-it-is out of there, and put in a brand-new Baldor!" the boss would say...I never saw any down time after that in those machines, and I was there for fifteen years! Kudos on a dependable product...

For years I worked with Baldor to reliable American made motors for the industrial gizmos I designed. I really appreciated their support and willingness to work with a modestly sized company.

I must be a super nerd, I was kinda bummed when it was over, my face glued to the screen the whole time.

Those motors can take a beating in harsh environments! Pretty cool to measure the inrush current on startup! Great video!

I don''t know of a better electric motor than the BALDOR, A very excellent product.

Okay, the winding insertion operation blew my mind.

Over the years in HVAC and also medical vacuum and medical air systems, I use a Baldor any time I can for retrofits. They are the best and last the longest. I get all kinds of problems with other brands.

I took a whole semester class about electric motors in university yet I am blown away by the way they wind the stator. I just kinda accepted it and never felt like investigating how that was done. Would have never imagined the coil was formed separately and then stuffed into the armature.

Great manufacturer process Thank you! For upload this video

I am very impressed, Fantastic motor manufacturing. I have learned a lot, Thank you!

I rewound Baldor/Reliance motors on a carrier. When you pull one of those puppies out of the ventilation can the case would have so much rust because of the sea water corrosion. We would wire wheel the case and end bells and varnish them. These motors were tanks.

@gurtejsingh2589

6 жыл бұрын

kawasabi1 of

SUPER Fine job, the motors look great!

nice videos and very important for engineering to improve there job .thank you very much for all subject.

I was a Baldor warranty shop in Portland Oregon, Advance Electric Motors since 1986 I retired 5-yrs ago. My partner is STILL promoting Baldor Motors. I just went to a basketball game with Dale H. on Saturday evening. I guess you could say, retirement has been good to us both. YES! YES! YES! Baldor makes a GREAT MOTOR...

@ABBMotorsandDrivesUS

6 жыл бұрын

Hi Paul, thanks for watching! We appreciate the service you provided from Brooklyn St in Portland all of these years! Enjoy your retirement, sir - we'll keep manufacturing quality motors for your/our customers.

Great video. Good to see that motors are still manufactured in the USA.

Excellent vedio thanks for posting it is very important vedio clips for all electrical engineering students..

I have a Baldor motor made right here in the U.S. It came with a Lortone lapidary combination unit. Now that I've seen this, I'll have that motor for the rest of my life. :D

I have many Baldor motors in my machine shop. Keep up the good work!

I have bought, sold, and specified your motors, this was fun to watch. Always cool to see high qualty manufacturing still being done in the USA. Baldor has a reputation they can be proud of.

A great people make ABB a great company.. Keep it up..

I always watch this video about once in a year, It works on me like some sort of SMR seeing those windings get pulled trough, and I always chuckle near the end because of that tiny fan being put on such a huge motor and then being guarded by that humongous fan cover, when the fan itself is like the size of a small jet pump 0.75HP motor fan lol

Very nicely done. Enjoyed watching.

I don't know why, but I find manufacturing fascinating.

@rendanin8329

6 жыл бұрын

it is

@ABBMotorsandDrivesUS

5 жыл бұрын

So do we! Thanks for watching!

@umarsinhsodha1702

3 жыл бұрын

I nid this job

@umarsinhsodha1702

3 жыл бұрын

@@ABBMotorsandDrivesUS I nid job abb motors

Thank you so much for posting these videos. It's fascinating to see these built. Keep up the great work, and thanks for staying in the USA!

I love 3 phase ac motors like these

Great video. Thanks for posting.

@Skipperj

7 жыл бұрын

A superior US made product which I've bought often as chief eng. on many ships.

@jessebreen7034

7 жыл бұрын

Hello Baldor! I am actually working on a Capstone project right now for my Supply Chain Management degree specifically revolving around redesigning an electric motor production facility. I would love to get in touch with one of your engineers regarding some of the processes and materials used throughout the manufacturing flow. What would be the best way to get in contact with you for such a conversation?

@jessebreen7034

7 жыл бұрын

Thank you! Just sent an inquiry. :) I also love your Mississippi plant video. Very informative!

@laldewkumarsingh2021

7 жыл бұрын

C Smith

@tasirhabib2149

6 жыл бұрын

C Smith kokugxzdg

Induction motor are almost indestructible. Also, very safe in explosive environment. Only drawback of induction motor is the huge reactive power they draw from supply to create the magnetic field. That is more prominent under low load conditions. As load increased, the ratio of reactive to active current becomes smaller and hence power factor improves. I worked with GE motors earlier.

@carmelpule6954

6 жыл бұрын

You may always add and subtract a capacitor in parallel.

@tasirhabib2149

6 жыл бұрын

Debraj Deb hhjjiijhhhkohv to jjhhfx..Ipppp

@tasirhabib2149

6 жыл бұрын

Debraj Debmnuibkjigfrii zjooiswwacjb h

@rigidfinger

6 жыл бұрын

Thanks for the insight. Worked for many years in manufacturing in different capacities. Always found that making things gave a person a sense of accomplishment for a day's work. Something you just don't get in other lines of work.

There must be a rebuild factor in the design for future service. I've seen videos of motor rebuilders, and they rewind and reassemble them. Complicated stuff. Great video. Well trained staff.

Thank you, I didn't know you had heat treat the stator.

@roodick85

3 жыл бұрын

Those stators are bulletproof!

thanks

The Cafeteria should also be featured... because there is a lot of work going on there keeping people at work... and Fed. I love it. thanks

Beautifully machined, conformal coated and skookum choochers all around.

@travistolbert2647

4 жыл бұрын

lol You can always find the AvE fans....

@Fireship1

4 жыл бұрын

legendario13 a motor made so good, even AvE would be proud!

@firebladex8586

4 жыл бұрын

Can't wait for AVE to do a tear down on a Baldor motor. They are common on bench grinders.

I work for Allmand llc in Holdrege and we manufacture large industrial light towers. We used these generators in our products from the late 90's up to the mid 2000's.

@ABBMotorsandDrivesUS

Жыл бұрын

Thanks for sharing your story! Check out our updated NEMA manufacturing videos: kzread.info/head/PLFwq1JTSL1fg36OqPdaiTpfPTLgEUJE5H

Damn that some operation its mesmerising.

I wanna build motors....I've been replacing them for most of my professional career and now I just want to build 'em. looks like a cool/fun job.

@dorothygale5896

3 жыл бұрын

The motor repair shops are where the action is.

@ryanleese1240

3 жыл бұрын

They come in the workshop hammered to death. It's hilarious.

@ryanleese1240

3 жыл бұрын

Swinging a 7 ton motor on a crane though is fun.

@jimboslice9472

3 жыл бұрын

how ignurt

@corin164

3 жыл бұрын

To answer your question Michael, it is not cool. I was a motor rewinder in the NAVY for several years and it is not as "cool" as you think it is. We didn't have some of machinery Baldor has and we didn't do our work in a stable platform. We also didn't have the luxury of doing the rewinding process on the stator only. We man-handled the entire motor at step of the way. This included determining the wiring configuration, removing the old damaged wiring, prepping the stator laminations, making and inserting the coils, dipping and baking of the windings.

I have lived in Athens almost all my life and I always wondered what that place was now after roaming youtube I find out what it is 🤙

Very informative video to both mechanical and electrical factors.

Beautiful country with beautiful video

Baldor - good quality stuff for harsh environments. Been using em for 15+ years. Mostly 20hp-100hp. Keep em lubed they'll run for years and years.

The man applying sealant at the 9:30 mark has done that a few times.

@mohammedbeso1032

6 жыл бұрын

bg147 ط

@marshalljimduncan

6 жыл бұрын

It becomes easy a nigh on input of a tidbit all of the years ya heard

@yayrim5960

6 жыл бұрын

bg147 h ₩=

@sachinbhardvaj6350

6 жыл бұрын

Sachin bhardwaj

@dtiydr

5 жыл бұрын

It has a flange (cant really see it) so you just rest the nozzle at that and follow it around, its not that hard.

Very informative , thank you / Brammer

Great video !

Good to see people of all colors, ages, and sexes working together to make Made In USA products. Have used/installed a lot of Baldor motors in my career.

@ABBMotorsandDrivesUS

6 жыл бұрын

Thanks for the comment bigwheelsturning! As ABB, we continue to manufacture, design and market Baldor-Reliance motors and Dodge mechanical power transmission products from 15 U.S. manufacturing locations - 60 U.S. locations total across all of our portfolio. Take a look at this video on our commitment to local manufacturing: kzread.info/dash/bejne/ZqOilq5rmaXLodY.html

I also make these but then without any machine to help me, apart from making the coils. The motors we make aren't really the easiest to make, thats why we still wind the motors with hand from start till finish.

I do like seeing Baldor motors on equipment that I have to work on. They are well built motors the shafts are not off slightly like some of the Chinese motors. I really want a big Baldor buffing wheel.

great video thank you!!

I love athens. great food, great school, great motors.

Great video. Tesla would be pleased to see the amazing progress of his invention.

@electricalsolutions9937

7 жыл бұрын

thanks for sharing information

Great product, I've probably built motor controls for these.

Very goooooood!! Thanks!

I work for a company that makes coils for ac motors love learning about the industry great industry to be in

@mohamedshahba746

5 жыл бұрын

Do you recommend any source to learn about ac motors ?

Thanks. Great Video...

Excelente empresa, felicitaciones.

Dang spiffy.. Had that Baldor bench grinder for years

Got a Baldor bench grinder.

@evelyngray4804

4 жыл бұрын

X says don’t look at me in that tone of voice. Hey Do you want to chuckle so hard ? Then search on google "makemelaugh8282" or "make me laugh 8282"

It's good to see American manufacturing still alive and perhaps even coming back with 600,000 new manufacturing jobs added within the last few years.

outstanding video!

Very nice. Am still troubled by the idea of lamination stack welding. Given the efforts put into maintaining good insulation of lamination stacks in transformers built by us in the past.

Shuch a intensive job! Wow!

What fantastic productions of motor conglatulations

I really like AC motors

@typedef_

6 жыл бұрын

I suggest you start liking DC motors as well.

@EGL24Xx

6 жыл бұрын

typedef I can't think of a single DC motor besides the brushed DC motor... And that one sucks.

lucky to have 1.5 hp on target tile saw for 30 years it rarely gets a sweat on, of course good blades help that even so when i turn it on job gets done. Now going to set saw up to cut 60 inch tile baldor says bring it on

also it's oh so good to see this made hear in the usa!!!!!!! I recently ordered a Stant thermostat for my car..Ive used stant for most my life in everything I worked on...it was made in china and 10 hotter than it should be.never again... made in america is the place to shop!!!

@ABBMotorsandDrivesUS

3 жыл бұрын

Thanks for your support mark tucker. We continue to manufacture our motors and gearing products where our customers are at. Check out this local manufacturing video for Dodge gearing products: kzread.info/dash/bejne/ZqOilq5rmaXLodY.html

@TVBlindBonsai

2 жыл бұрын

@@ABBMotorsandDrivesUS Please Don't delete or private this Video. in this video made by SANDBOX NETWORK.

Good work

thanks for posting

interesting video, big up.

Nice video! Great products... we sell lots of 'em. Keep up the good work!

Great planning

nice video if the rotor is explained a litle more like salient pole and non salient pole it would be helpful

ABB is former Asea a company that was formed in my home city of Vasteras in Sweden. So its not so strange they make good stuff

@checkyoursix5623

3 жыл бұрын

Asea got married with Brown Boveri (Switzerland), now " ABB ".

Impressive !! Is there a vid showig the insertion of factory core insulation ?

That’s quality right there.

Awesome! 👍🏻

Nice to see motors manufactured in the 🇺🇸

Very interesting!

Very informative.

This is awesome great technology nice production team Baldor motors are great.

@ABBMotorsandDrivesUS

Жыл бұрын

We agree!

I love to hear that motor start up sound

@ABBMotorsandDrivesUS

4 жыл бұрын

So do we, Kishan!

@kishanpreston1533

4 жыл бұрын

@@ABBMotorsandDrivesUS 🤙 ABB

The great work sir

amazing video, I am an electrical engineer with designated quality engineer with vast experience in high capacity thermal power plant, really the standard of manufacturing is extraordinary,will it be possible to visit your plant when i happened to visit usa. one must learn your methods and practices in developing countries like india.

good work