We can not solve the problem by understanding it, but understanding it will help us better solve it. “You can never learn less; you can only learn more.......” - R. Buckminster Fuller Thank you for sharing your expertise!

@engineeringautomation

3 жыл бұрын

Well said Thomas👍

Thank you for sharing your knowledge with us Sir. Which means a lot.♥️

@engineeringautomation

3 жыл бұрын

Thanks a lot sayyad.. ur feedback means a lot to me.. please keep supporting

Waiting for the next

Nice video for BACnet understanding...Waiting for the Next...

@engineeringautomation

3 жыл бұрын

Hi sudhir, thanks for your feedback. Please share and support. Thank u

Great job in clearly describing, a complex set of information.

@engineeringautomation

Жыл бұрын

Glad you enjoyed it! Please share and subscribe..

thank you very much for this, very well explained

@engineeringautomation

3 жыл бұрын

Hi, thanks a lot for your feedback. Please keep supporting👍

Thank you for a clear information

@engineeringautomation

2 жыл бұрын

Hi Karthika.. thanks a lot for your feedback. Please share and subscribe. Thank you👍

I work in building automation and if I had to compare using BACnet versus modbus or some industrial protocols during my college, like Profinet, it allows you to identify the data you're looking foruch quicker, assuming everything has been named properly and has units. Modbus requires you to have a register map in order to know what to fetch, and if you need to convert it if, for example, it's raw ADC.

Thanks ❤️

Thanks for sharing clear presentation

@engineeringautomation

2 жыл бұрын

Hi Amadou.. thanks for your feedback. Please subscribe and support

Great Video for beginners

@engineeringautomation

Жыл бұрын

Glad it was helpful! Please share and subscribe to our channel.

THANK YOU SIR

@engineeringautomation

2 жыл бұрын

Hi sha.. thanks for your feedback. Please subdcribe

I have been in building automate a few years and have seen/used the "Bacnet Ethernet" option within Compass and the associated use.....but I am not sure what is happening within the protocol layers for this option. Within an Alerton ACM, this open is what allows you to access the configuration settings ......which I believe you would not want to get corrupted over say the bacnet/IP connections. Does that make sense?

@engineeringautomation

6 ай бұрын

it depends.. as BACnet/Ethernet uses MAC address and BACnet/IP uses IP address. with BACnet/IP you can communicate between different subnets which is not possible with BACnet/Ethernet. in the other hand using MAC address gives additional security

SUPER

May I ask what is the difference between BACnet and DDC controllers? I'm a newbie in BMS..Please explain sir..Thanks in advance

@engineeringautomation

3 жыл бұрын

Hi Benny, thanks for your feedback. BACnet is only the communication protocol of the BMS system. DDC’s are Direct Digital controller which connects to the field equipments. The DDC controller communicates to the BMS system via BACnet protocol. Hope this helps. Let me know if you need more informations. Please share subscribe and keep supporting👍

@bennydelacruz1779

3 жыл бұрын

@@engineeringautomation Does BACnet mean it's only a wire that connects from one device to another device?

@engineeringautomation

3 жыл бұрын

There are different levels in BMS. You can watch my first video about the BMS system for better understanding. DDC to field are hard wired cables. Separate cable for each IO point. From DDC to BMS is usually through the building IT infrastructure.

tuyệt vời

Excellent presentation!!

@engineeringautomation

3 жыл бұрын

Hi Salim, thanks a lot for your feedback. Please keep supporting

@salimyousuf8848

3 жыл бұрын

@@engineeringautomation can you tell differences between the native bacnet and common bacnet?

@engineeringautomation

3 жыл бұрын

Hi Salim, Native BACnet means the device speaks and understands BACnet and uses any of the 6 LAN technologies explained in this video. There is no common BACnet devices. They are called non-native BACnet devices which uses Gateway to Convert protocols such as Modbus, Lonworks, KNX etc., to BACnet. This gateway is used to pass the Application layer as the non-native BACnet devices messages are different. Hope this helps

@salimyousuf8848

3 жыл бұрын

@@engineeringautomation thanks this was very helpful

good

Excellent sir

@engineeringautomation

3 жыл бұрын

Hi sayyad, thanks a lot for the feedback. Please keep supporting

@sayyadafrid5101

3 жыл бұрын

We expect more vedios on field devices

Sir I have realtime bacnet data, how can i send to data to database.Please help

@engineeringautomation

3 жыл бұрын

Hi Nishith, sorry for the late response. You need to have an application software to send service requests to fetch the data. You can try SQL or MongoDB to try and fetch data from network. But i dont have much experience on the server and software side. Sorry i couldn’t help you.

waiting your next video

@engineeringautomation

Жыл бұрын

Hi Adi.. i have more videos uploaded in the channel please go through all.. i hope you will like it

Please make vedios on Field devices.

@engineeringautomation

3 жыл бұрын

Hi Sayyad.. sure..

Can you plz share link of official bacNet website. I want to learn bacNet objects plz share

@engineeringautomation

3 жыл бұрын

Hi Roshan, its Bacnet.org

@roshan2940

3 жыл бұрын

Ty👍

Why u r not uploading new videos?

@engineeringautomation

3 жыл бұрын

Hi Joel, quite busy on the job. New video will be uploaded in a couple of days. Thank u

Upload videos on OPC and modbus

@engineeringautomation

3 жыл бұрын

Hi Roshan, well noted.

Hey plz make video on Lonwork🙏

@engineeringautomation

3 жыл бұрын

Hi Roshan, thanks for the feedback. I am working of MS/TP now, after that i will do LON

@joelgeorge8700

3 жыл бұрын

Yes sir, please make it fast I also need this video

like

In one Lon loop how many FCU can connect sir?

@engineeringautomation

2 жыл бұрын

Hi Xavier… its depends on the LON controller. Some supports 60 and some 120. Its depends

@xavierthankaraj1381

2 жыл бұрын

@@engineeringautomation thanks

Just reading and reading 😅😂😂😂

thora zoor se bolo

@engineeringautomation

6 ай бұрын

turn on captions and slow down the video

good

like