Guys at 5:18 its 1200 meters or 4000 ft. Sorry for the mistake.

Nicely presented

Expecting more vedios on building management system. Good luck 👍

Excellent Sir. Thank you for sharing your experience and knowledge with us.♥️

@engineeringautomation

3 жыл бұрын

Hi Sayyad, thanks a lot for your feedback... please keep supporting

PLEASE POST MORE VIDEOS .YOUR CHANNEL IS ONE OF THE BEST IN KZread FOR LEARNING AUTOMATION .

@engineeringautomation

3 жыл бұрын

Hi Fazal.. thanks a lot for your feedback.. it means a lot.. due to my hectic work schedule uploading videos taking more time.. definitely more videos are planned for future. Please continue your support towards our channel. Thank You.

Very Helpful... Please Continue the series

@engineeringautomation

3 жыл бұрын

Hi Atik.. thanks for your feedback.. please subscribe for future videos.

Great sir

Fantastic work sir, we are waiting for more & more informative videos like this. please upload it we have been waiting for a long time; you do not upload any video. please go ahead

@engineeringautomation

Жыл бұрын

Hi Mushtaq.. sure will upload more videos. been busy in office works.

👌👌👌👍

Good job Eng. Thanks.

@engineeringautomation

Жыл бұрын

Welcome! Please subscribe and share with the friends.

Thank you very useful information

@engineeringautomation

Жыл бұрын

Glad it was helpful! Please share and subscribe to our channel.

When Nxt vedios will be released.😀 Curiosity on mind.

good

What happens with the com terminal 6:00 is it supposed to be connected to com of the power supply for the device?

@engineeringautomation

2 жыл бұрын

Hi Fred.. sorry for the late reply. The COM terminal can be used to ground the shield wire.. if it is required as per the manufacturer recommendation

Is token is shared between all masters of the building like for example if there are two routers both have there own slaves then is it necessary for them to share single token? according to my understanding they must have their own token which is single/unique within a unique master slave network.. i am confused

@engineeringautomation

11 ай бұрын

Yes.. each master will send token to the slave which is passed on to each slave..

Great videos….what book do you recommend reading to learn more about BacNet MSTP, BacNet IP?

@engineeringautomation

2 жыл бұрын

Hi Billy,, you can check Bacnet.org for more informations regarding BACNET

Well explained So only building controller BC can be master Advanced application controller AAC & advanced specific controller ASC can only be slave 0-127 ,127- 256 is it MAC address or device id address.?

@engineeringautomation

3 жыл бұрын

Hi Salim, B-BC belongs to DDC controllers which are capable of taking IO points. That cannot be used BACnet MSTP. It will be either BACnet/IP or BACnet/LON. BACnet MSTP is used for ASC or AAC controllers which has very low power consumption. B-RTR Bacnet routers are required to connect the MSTP devices to BACnet/IP backbone. Both ASC & AAC controllers can be configured for both Master as well as Slave. Since slave devices have disadvantage, all controllers are configured as Master devices. Address range 0-255 (not 256 sorry) is the device id which needs to be set on the MSTP devices. Hope this helps. Please share this video and subscribe to our channel. Thank you.

Please More videos on bms system

@engineeringautomation

3 жыл бұрын

Hi Malik.. thanks for your feedback.. sure will upload more videos on BMS. Please keep supporting by subscribing to the channel and sharing the videos.

What is bacnet IP and OPC. PLZ make video on it

@engineeringautomation

3 жыл бұрын

Hi Joel, your request is noted. Just for your info, BACnet IP is used only in the BMS system as it is the preferred communication protocol for the BMS system. However OPC stands Open Platform communication which is developed originally to integrate different vendors Industrial Automation Systems.

good explanation, where you from?

@engineeringautomation

3 жыл бұрын

Hi venkat.. i am from india

@venkatvijayakumar6176

3 жыл бұрын

@@engineeringautomation wow good to hear, you didn't mention your name and India where specific?

5:18 1200ft is equal to 400 mtr(approximately)... Please correct

@engineeringautomation

3 жыл бұрын

Hi Sanket.. thanks for pointing out. It's 1200 meters or 4000 ft the cable length supported by MSTP networks.

You will have to correct your slide 1200mts or 4000fts

@engineeringautomation

2 жыл бұрын

Hi amit.. thanks for correcting. I have already pinned it in comment section.

hay

thx for your video and all the information but your english is quite hard to catch ;)

@engineeringautomation

Жыл бұрын

Sorry to hear that.. Please turn on captions so that you can follow the video through. Also you can slow down the video as per your convenience..

Good video, but need to work on your English sir. Very hard to understand.

@engineeringautomation

6 ай бұрын

hi.. thanks a lot for your feedback. Please share and subscribe