The most entertaining inline channel besides TWIB on KZread! Loving it! Keep it up!

@RollOverTheHill

3 жыл бұрын

Lol! Thanks so much!

Can't wait to watch this!!!!

I salute you homie. I still have Rollerblade lighting and the dirk. These past few days I've been watching and looking at the new style of skate. Wow how they have progressed. You can change everything in the skate. I miss it but I'm 38 now and maybe I can get back to doing 540 misty flip. PADS required. Thanks you for sharing your experience with those skates. I'm looking for a new pair. Thanks again 🤘

Thanks for this video, it gave me some really good tips on setting up my 909s both for comfort and for flat

good stuff man just ordered the 908 communitE. All about THEM right now

@RollOverTheHill

3 жыл бұрын

Awesome! Those are rad. I would have grabbed a pair but the 908’s are slightly shorter than the 909’s and I barely fit the 909’s as it is.

@AlmostLakai94

3 жыл бұрын

Thinking about ordering a pair tomorrow 😬 just nervous I'll regret not getting 909s but I kind of prefer the lacing style on the 908s and can only find the Danny beer model lol. Will probably go with the intuition communitE

Thanks Chris. Enjoyed that. Love that description. Have you done any more on the wall? I like the art on the Beers. Thought it was Chinese characters at first in your edit for some reason. Also like your 'eat shit fuck you' piece on the wall. Very cool setup you've got there. Both your basement and your skates. I've been enjoying my black 909s with the Them Intuitions. Switched back to my Darsts with the Intuitions this week after Joey's comparison video to have a feel for myself. Managed 37 grinds for 37 years a couple days ago. Nothing impressive, and a few very similar tricks, but I'm pretty pleased with myself. No falls too. I usually take it easy and just do a few basic tricks and roll around. You and JAD have inspired me to try getting into switchups more. I had royale to unity (or I guess it's a Savannah or ao unity or whatever) on my list after I saw you doing it on that Apex ledge I was asking you about. Didn't feel comfortable enough to try it, as I've never even done a Savannah, but I did get a better feel for a couple proper switchups. Need to push myself a bit more. You're making those negatives look good too these days. Might try to get into those a bit. Need to build a nice long low ledge at my DIY spot. Posted a quick video of my 37 if you're interested. Thanks for reading and thanks again for the video. I like listening to what you've got to say about stuff. Cheers, Mark

@RollOverTheHill

3 жыл бұрын

Thanks Mark! I’ll definitely check out your video, that’s awesome. My mural is almost done. Once I get it done I’ll post a video. I’ve just been distracted with other stuff.

@sameboat9162

3 жыл бұрын

@@RollOverTheHill Nice! Cheers Chris! Look forward to seeing the mural.

Getting my RL1s today!!!

"these are my skates" xD

Keep up the content dooder!

@RollOverTheHill

3 жыл бұрын

Thanks!

Hi. Would you be able to reccomend a generic aggressive skate brand to look at for someone Not looking to do grining. Ie lightweight skates to roll around and jumps in the park. No sould grind plates needed i assume.

i found you experienced razors shift and them 909, which are what im thinking about ordering soon. my foot is about 255mm length, 10.5cm width, and i have a intuition premium liner/ myfit spc dual liner. i heard both of 909 and shift are really good but i cant try both. can you recommend one between them base on your experience? thanks!

Great video, however the intuition liners do have neoprene toes! Just a much harder one than some liners.

@RollOverTheHill

3 жыл бұрын

Thanks! Good to know. My issue was that because it wasn’t pure neoprene it took up a little more room and the fit is so close for me.

did i miss it, or did you never really tell us what size your feet are. what size normal shoes you wear? i am a 10.5 and just orderd medium 909s and hope for the best that they will fit. 🙂

Super entertaining, great review! What size roces liner worked for you? Their sizing info is super confusing, they might as well be in Hieroglyphics

@RollOverTheHill

3 жыл бұрын

Haha thanks! The larges fit me well!

that lacing is the same as having one more eyelet between the last two highest ones. that is all

Nice video, usefull infos here! You're downplaying your skills IMHO. Two questions: Have you skated the Kaltik Flat V2 by chance in comparison to the Fluid V? And how much thinner is the RL1 overall compared to the Roces M12 stock liner? Thanks!

@RollOverTheHill

3 жыл бұрын

Thanks! I appreciate your sentiment on my skills! I haven’t tried the Kaltik frames yet, but I have been interested... maybe I should get them to test them out... for science... lol. The RL1 is substantially thinner than the stock M12 liner. I tried the M12 liner in the 909’s a long time ago and I could barely get my foot in there. When I stood up there was just too much pressure. With the RL1’s I have to crank down the lacing to account for the extra space vertically in the shell.

@manuever.blading

3 жыл бұрын

@@RollOverTheHill Thanks Chris! Maybe I'll give the RL1 a try. Looks like it has a good quality. I really like the M12 and the stock liner because I have so much response. I would like to keep that responsiveness and crank down the laces a little more too.

@RollOverTheHill

3 жыл бұрын

@@manuever.blading I think you’ll like it. It’s definitely on par with the intuition in terms of quality and the increased responsiveness is definitely noticeable for me. They did take a few sessions after heat molding to fully break in. So just keep that in mind.

@manuever.blading

2 жыл бұрын

@@RollOverTheHill Hi Chris, I'm on the RL1 now too. Great quality, first session left me with foot pain though (haven't had this issue with the stock liner, though it's way thicker..). Wanted to ask you if you heat molded the RL1 because it was necessary or just because it offers the option? Asking this myself right now, because I think I can break them in by skating, however wondering if the heat molding would offer other advantages beyond speeding up the break in. Oh, and I am using it in the 908 btw. Thanks!

Just wondering about sizing. Do you find it's worth sizing down in the shell? I am a true size 9 sneaker, and want to do intuition skate premiums. Oak Street said the Medium, but from what you've said, and what my buddy who skates (size 11) said, the small shell is plenty big enough. Any thoughts?

@RollOverTheHill

2 жыл бұрын

I find that if there's extra room in the shell the skates feel really sloppy to me. I try to get as small of a shell possible without there being discomfort.

Question: DO you find it almost impossible to get wheels in and out of your fluid 5s? i set mine up with Win J-Bah / Bones Reds and the included hardware and it takes SIGNIFICANT force to take the wheels in and out.

@RollOverTheHill

3 жыл бұрын

Haha yeah it’s a pain for sure.

@BigSh00tsie

3 жыл бұрын

@@RollOverTheHill ok so I'm not doing something wrong. Phew...

@rollforever_85

Жыл бұрын

I know this is an old comment, but if you want a quick hack to insert the inner wheels on Kizer fluid V I have a video on my channel =)

@BigSh00tsie

Жыл бұрын

@lonerblader85 thanks! I don't even really skate much anymore unfortunately

Nice bit of setup information. Any particular reason you don’t want to support Razors?

@rollforever_85

Жыл бұрын

Probably because the bossman Andy at Razors has a reputation for not looking after/paying his riders

I hope this isn't a bother and I'm sure you've answered this somewhere, but what's the CM measurement if your foot and which size RL liners did you get?

@RollOverTheHill

3 жыл бұрын

I'm just about 290 and I fit the larges.

@BigSh00tsie

3 жыл бұрын

@@RollOverTheHill Thanks! are you in Medium shells or large? Edit: never mind i think you said somewhere you're in mediums.

@RollOverTheHill

3 жыл бұрын

@@BigSh00tsie yep, mediums! (just barely)

@BigSh00tsie

3 жыл бұрын

@@RollOverTheHill looks like I can expect my Beers to fit me then! Thanks again! Also, given this purchase was directly inspired by you and this video, I will go ahead and direct my wife's commentary to your inbox 🤣

Why can't they call themselves "wish" instead of some unpronounceable name your told is pronounced "wish" lol it looks like oiisee, tell me im wrong!