Keep the blaster! Im sure by the time you have grandchildren they’ll be riding it!
@illestferio10 ай бұрын
Keep it!!! Shits clean af
@Floridawoodsbanshee5 ай бұрын
I subbed just because of your positive attitude. Yes sir, you pulled it apart and built it yourself. Now you also collected tools for future buids. I'm doing the same thing. Just put up video today.
@steve-oskee123 Жыл бұрын
Badass bro, I've been wanting to put a t5 banshee expansion chamber on my blaster, I put a yamaha xtz250 motor from a 1983 yamaha xtz trail bike on my blaster, thing ripps
@brentmick Жыл бұрын
try the amazon cheap knock off of the pwk30, which you can adapt to your vented stock air box, that was a smart move the way you set up your air filtration system, i pass people on the trails every weekend with them "cool air cone style filters" when they get water or sand in them. Also a little trick i discovered when it comes to transmission oil that will prolong the life and increase the performance of your clutch while training the youngsters, is using gm ac delco auto trac2 transfer case fluid. may sound crazy but its designed for a wet clutch type automatic awd tcase with 400 hp turning it and lasts 20-50k miles. displaces heat much better, excellent for wear prevention and clutch material. ive been running the same 15$ amazon clutches for over a year with the sight glass completely full and it never gets hot enough to puke out fluid, and the clutch is more responsive than ever, even after teaching my 10years old to shift on that bike. nice build man. idk what kind of trails you ride but in my neck of the woods ground clearance weight and low end power are king, blasters are super compact and light, bigger rear tires and wider stance, compensated for with smaller front sprocket, and youll be doin nothin but showin out on the streets with that banshee and wanna ride the blaster off road everytime!!
@itsyahir789 Жыл бұрын
Keep it for your kids bro 💯💯
@WeDontEatTheSameTV Жыл бұрын
U better keep it !!!
@Atv_Donut Жыл бұрын
What carb did you use
@crazystuntz538010 ай бұрын
Keep it bro 😎
@AMiscellaneousgarage5 ай бұрын
Nice Blaster,late to the party but I would keep that one the Kids would Love it! 👍
@shakurdarker3194 Жыл бұрын
What inches are your headlights ? 4 or 5 ?
@kristhianandrey92382 ай бұрын
can you explain me the way or what did you use for the rear brake hydro swap
@Chevro91Ай бұрын
Tell me about them two led lights are them a blaster ready made setup or what light are those and brackets ?
@Quad-Fury4 ай бұрын
Where I can get the case cover for the filter the top one ? Mine is missing that
@Chevro91Ай бұрын
I say keep the blaster i collect em while i can. There’s so many of them around easily to rebuild parts are readily available just like banshees and they’re half the cost to build.
@edermelendez8262 Жыл бұрын
Sir where can I get those headlights man please share the link
@braydensevern56486 ай бұрын
Hey man where did you get that throttle cable for that throttle setup
@Slimreaper93
6 ай бұрын
Motion pro Amazon
@randyjackson6111 Жыл бұрын
Keep it
@farf20247 күн бұрын
crisp
@kevinsmith43053 ай бұрын
Blasters are unique bro keep that shit😂😂😂
@zacharyharnish4442 Жыл бұрын
Give it to the kids man!
@dwbk911 Жыл бұрын
Keep it for the kids bro Yamaha ties 🫡🤞🏾💯
@xanman29 Жыл бұрын
Hey man did you end up restoring your t5s? And if you did how’d you do it
@Slimreaper93
Жыл бұрын
For the banshee? I painted them.
@WeDontEatTheSameTV Жыл бұрын
Lol said the same thing about that truck with the trailer
@Mikeofindy8 ай бұрын
can you give reference number or name of the carb you used please ?
@EastGillyOutdoors11 ай бұрын
My dude said "spunt"
@user-nv3sg3jd4p9 ай бұрын
do you have stock sprocket gearing on it?
@Slimreaper93
9 ай бұрын
14 front 41 back
@daleskiog74999 ай бұрын
Sounds good but don't you hate when things act up when the cameras on but start right up when you ain't filming lmfao
@StephJackson-je6qz9 ай бұрын
Keep
@saiz443910 ай бұрын
yo how did you mount the headlight (leds) where can i find them?
@Slimreaper93
10 ай бұрын
I used the front fender brackets to mount the lights. Got them from Amazon
@saiz4439
10 ай бұрын
@@Slimreaper93 yo can you help me cause I can’t find them. Do you have any suggestions of would I should be searching on Amazon. Thanks for your time G
@Slimreaper93
10 ай бұрын
@@saiz4439 yo type in led light pods and you will see them pop up for about $20
@saiz4439
10 ай бұрын
@@Slimreaper93 oh I meant the brackets or mounts. My bad for not being specific
@Slimreaper93
10 ай бұрын
@@saiz4439 the mounts are on the frame. Just use the screw holes where you would screw the front fender. The lights come with its own mounting kit.
@brentmick Жыл бұрын
keepthatblaster
@mizzins12162 ай бұрын
That’s an easy keep
@yami4g6315 күн бұрын
Quad*
@gzupnzdwn Жыл бұрын
If it’s fast as you say it’s not a kids learning bike bruh
@teafuse583 Жыл бұрын
Meh
@BontonBourtney6 ай бұрын
i got the same mongoose bike..bought my son one bout 12 years ago got stole when i took it to the country 2 years ago..found the same exact one last year bought it for me (son 22 now) the lady said 15 buck and i said dam i feel like im stealing lol but i got a 97 blaster vito's 240 big bore kit fmf pipe ported the reeds intake that boy fast and loud..i like the look of yo blaster
Пікірлер: 46
Keep the blaster! Im sure by the time you have grandchildren they’ll be riding it!
Keep it!!! Shits clean af
I subbed just because of your positive attitude. Yes sir, you pulled it apart and built it yourself. Now you also collected tools for future buids. I'm doing the same thing. Just put up video today.
Badass bro, I've been wanting to put a t5 banshee expansion chamber on my blaster, I put a yamaha xtz250 motor from a 1983 yamaha xtz trail bike on my blaster, thing ripps
try the amazon cheap knock off of the pwk30, which you can adapt to your vented stock air box, that was a smart move the way you set up your air filtration system, i pass people on the trails every weekend with them "cool air cone style filters" when they get water or sand in them. Also a little trick i discovered when it comes to transmission oil that will prolong the life and increase the performance of your clutch while training the youngsters, is using gm ac delco auto trac2 transfer case fluid. may sound crazy but its designed for a wet clutch type automatic awd tcase with 400 hp turning it and lasts 20-50k miles. displaces heat much better, excellent for wear prevention and clutch material. ive been running the same 15$ amazon clutches for over a year with the sight glass completely full and it never gets hot enough to puke out fluid, and the clutch is more responsive than ever, even after teaching my 10years old to shift on that bike. nice build man. idk what kind of trails you ride but in my neck of the woods ground clearance weight and low end power are king, blasters are super compact and light, bigger rear tires and wider stance, compensated for with smaller front sprocket, and youll be doin nothin but showin out on the streets with that banshee and wanna ride the blaster off road everytime!!
Keep it for your kids bro 💯💯
U better keep it !!!
What carb did you use
Keep it bro 😎
Nice Blaster,late to the party but I would keep that one the Kids would Love it! 👍
What inches are your headlights ? 4 or 5 ?
can you explain me the way or what did you use for the rear brake hydro swap
Tell me about them two led lights are them a blaster ready made setup or what light are those and brackets ?
Where I can get the case cover for the filter the top one ? Mine is missing that
I say keep the blaster i collect em while i can. There’s so many of them around easily to rebuild parts are readily available just like banshees and they’re half the cost to build.
Sir where can I get those headlights man please share the link
Hey man where did you get that throttle cable for that throttle setup
@Slimreaper93
6 ай бұрын
Motion pro Amazon
Keep it
crisp
Blasters are unique bro keep that shit😂😂😂
Give it to the kids man!
Keep it for the kids bro Yamaha ties 🫡🤞🏾💯
Hey man did you end up restoring your t5s? And if you did how’d you do it
@Slimreaper93
Жыл бұрын
For the banshee? I painted them.
Lol said the same thing about that truck with the trailer
can you give reference number or name of the carb you used please ?
My dude said "spunt"
do you have stock sprocket gearing on it?
@Slimreaper93
9 ай бұрын
14 front 41 back
Sounds good but don't you hate when things act up when the cameras on but start right up when you ain't filming lmfao
Keep
yo how did you mount the headlight (leds) where can i find them?
@Slimreaper93
10 ай бұрын
I used the front fender brackets to mount the lights. Got them from Amazon
@saiz4439
10 ай бұрын
@@Slimreaper93 yo can you help me cause I can’t find them. Do you have any suggestions of would I should be searching on Amazon. Thanks for your time G
@Slimreaper93
10 ай бұрын
@@saiz4439 yo type in led light pods and you will see them pop up for about $20
@saiz4439
10 ай бұрын
@@Slimreaper93 oh I meant the brackets or mounts. My bad for not being specific
@Slimreaper93
10 ай бұрын
@@saiz4439 the mounts are on the frame. Just use the screw holes where you would screw the front fender. The lights come with its own mounting kit.
keepthatblaster
That’s an easy keep
Quad*
If it’s fast as you say it’s not a kids learning bike bruh
Meh
i got the same mongoose bike..bought my son one bout 12 years ago got stole when i took it to the country 2 years ago..found the same exact one last year bought it for me (son 22 now) the lady said 15 buck and i said dam i feel like im stealing lol but i got a 97 blaster vito's 240 big bore kit fmf pipe ported the reeds intake that boy fast and loud..i like the look of yo blaster
Keep it
Keep it