The first new atv I ever had was a purple n yeller 1995 Yamaha Blaster. I was one happy kid. My dad was driving me home from the dealership with that diamond in the bed of his 1991 z71. As we pulled into town I reached over and laid on the horn trying to show it off. It was a great Lil bike

@TimeMachinesATVs

Жыл бұрын

I have a blue and yellow up next!

Your still the best Jared. Don't you ever forget that. All the way from Cen cal 209 baby!!!

Love watching the vids man keep up the work I’ll always be here to watch them

@TimeMachinesATVs

Жыл бұрын

Will do joe drake! Thanks for watching

Love the videos man your very informative and you keep things reall keep it up guys

Nice vid of the blaster deff a fun 4 wheeler, love your content

In the process of trying to get one running now!! Keep up the great content 👏🏾!!

@TimeMachinesATVs

Жыл бұрын

Thanks murray!

That intro song still slaps everytime

@TimeMachinesATVs

Жыл бұрын

Haha thanks phil

@jonathanoutlaw8925

Жыл бұрын

@@TimeMachinesATVs can u do an maintenance on an ds650 thank u if u still have it

Loved my Blaster, fun little quad to ride for sure.

Best trick I've found for problem pilot jets is a bread tie or trash bag tie. Melt the coating off and the wire is pretty strong for it's size and is small enough to fit through even the smallest pilot jets. It's even smaller than the finest tip cleaner on normal sets

@TheCowboyfromhell87

Жыл бұрын

Nice, I'm glad I'm not the only one who does that. Works pretty good on all the dirty jets I've dealt with.

Nice Blaster, thanks for sharing on the carb. Cleaning. I have a blue 03 Blaster just like that one!!

@TimeMachinesATVs

Жыл бұрын

They are awesome quads!

Seems like that full pipe gives her a snapier power band. She's a runner! Way to go.

I love my blaster. I've had a few diff quads and it's my favorite.

@TimeMachinesATVs

Жыл бұрын

My favorite as well

Dude I love watching your videos you give more info on things than any other person…. Also I put all different size main Jett in my Blaster and I never should have bought a Vito’s flat slide carb but I did, try a230 main Jett and for some reason a 160 works best, she’s sputtering a little in 3rd gear , I did air mixture tuning … What do you recommend ? I also have larger piston and cylinder….

Good vid keep up the good work buddy

Bad ass video buddy and the tips you give are great. Thanks.

@TimeMachinesATVs

Жыл бұрын

Thanks canada racing!

@Punny1234

Жыл бұрын

@@TimeMachinesATVs you're very welcome.

Blasters and Shee’s. Them be my favoritos.

@TimeMachinesATVs

Жыл бұрын

Yessir

16:01 🤣 thank you for the help on the carb cleaning btw about to scoop one for $1200

I have a blasters , I use Lucas 2 stroke oil and I mix it 40:1.

@TimeMachinesATVs

Жыл бұрын

They can take it

solid feedback , per usual .

@TimeMachinesATVs

Жыл бұрын

Thanks

Sure wish you were closer to Lexington Indiana. I have an 88 all original. I bought it from a guy that said it ran great. got it home literally rode it twice and it locked up tighter than a lid on the pickle jar.

Iv never owened 2 stroke. Is yamalube the only thing you can use for the fuel mixture? Thank you

what did you do to keep the bowl from overflowing? did the same with the same result

What brand and size fuel line do you use for replacement. Where do I get it. I have blasters , warriors, and a wolverine. They all need fuel line. I bought some blue stuff and it seems to get a cloudy like coloring to it real fast and gets real hard

I have a 2002 blaster and I took off the air box lid and I was told to re-jet my carburetor my main jet is stock when I re-jet do I go up in size or down in size

I appreciate the video.

@TimeMachinesATVs

Жыл бұрын

Thanks for watching joe. More blaster content this month

Also how many gallons of gas can you get out of one quart of yamalube? Thank you

Looking for a good 250R. What are they going for?

I like the twisty top screwdrivers also.

@TimeMachinesATVs

Жыл бұрын

Same for the little ones here !!

Nice boyz 👌

I like the newer blaster with old hood and headlight...for the reason that p3 and up have hydraulic disk brakes uo front and in the rear. But I have a 97 and 96 blaster and want to do the front and rear conversion for brakes on them both but I have not found out where u get the read hydraulic conversion because the older ones don't have the mount for the master on them.

@TimeMachinesATVs

Жыл бұрын

I sure like the new style headlight better tbh

The right bend pipe

@rowlanbeley3373

Жыл бұрын

Sweet

@TimeMachinesATVs

Жыл бұрын

Yessir

You can bend the stock bars back with a long steel tube done it before and it saves money especially on a quick flip bike

@TimeMachinesATVs

Жыл бұрын

I've considered it but ive also snapped em doing so.

@braap_brody

Жыл бұрын

@@TimeMachinesATVs don’t take your wheaties that day and you won’t snap bars lol

Got me right in the 4 head 😂

@TimeMachinesATVs

Жыл бұрын

Lmfao

Blasters are so much better with a YZ 250 engine. Going liquid cooled makes a big difference during summer. The extra hp never hurts either.

@danielleeson7622

Жыл бұрын

Has it been done?

Wish I was there! Get up in there

@TimeMachinesATVs

Жыл бұрын

Lots more coming !

Get up in that yamadog

@TimeMachinesATVs

Жыл бұрын

Every chance i get

How many times have we launched a pilot jet into orbit trying to blow through it with compressed air?? 🤘 Always disappears into the same place the 10mm sockets go 🤷‍♂️

@TimeMachinesATVs

Жыл бұрын

Haha yeah elon musked a few of em

Is that stock?

texas there comes oil from? i mean that is what u see in the movies :)

Do you prefer an oil injection delete with 2 stroke mix Or the original oil tank In it?

@jayski8987

Жыл бұрын

It’s good for a stock machine, but If it’s modded in any way, ditch the injection and pre mix

Correction spark plug is 13/16 socket not 15/16 lol

I have a blaster for my son and my buddy has one for his daughter. He has been fighting a hanging idle issue for quite some time. He went as far as switching to a lectron carb and is still having problems with it. I noticed my son's bike doesn't want to idle down very well either. Is this just a blaster thing or should I be concerned about an underlying problem? Please don't say crank seals.

@TimeMachinesATVs

Жыл бұрын

Either case seals or reed boot leaks either way leakdown test will confirm. Or even starting fluid while its running spray around engine side of carb and intake boot etc

I just bought my first banshee for 4500 guy told me it was in perfect condition I brought it home check compression both sides are at 90 does that mean I need a top end rebuild

@TimeMachinesATVs

Жыл бұрын

Pretty close yeah. Should be 120 plus

💯👍

Mr. Time machines have you ever thought about doing AQ and a or going live talking with your subscribers

@TimeMachinesATVs

Жыл бұрын

Have done lots of live videos but i take them down right after. Thinking of starting a regular show eventually

Damn, you got me wanting one now. What year is this one??

@TimeMachinesATVs

Жыл бұрын

05

I always used Sunoco 2cycle?! 😂 Small engine, outboard motor, etc.?!!

Why not pressure wash carb while still in atv?

@TimeMachinesATVs

Жыл бұрын

You can but may have to do it again when off.

I need that exhaust lol

@TimeMachinesATVs

Жыл бұрын

Pretty decent!

👍👍👍👌

I have a berry pink and white spy racing edition

@yungBitta291

Жыл бұрын

99

@TimeMachinesATVs

Жыл бұрын

Blasters are my favorite!!

What's up

@TimeMachinesATVs

Жыл бұрын

Happy new yesr

no clutch life lol

15/16???? WTF come on bro… u r betr than that. I thought💭 💭

Do you have an Instagram I can do about getting a blaster rebuilt

HOW TO MESS UP A CARB HE CLEANED IT AND IT SPILLED OUT THE OVERFLOW LOL 😆