Thankyou for you're video, saved me £75 in fitting from a well known car superstore 😁

Thanks for the video man. Really helpful tips!!

Thanks!!!! My citroen c1 is sooooo pretty now 😍😍😍

@melissagrieveson1026

3 жыл бұрын

Where did you order your radio from and do you have a picture I could have a look at of it in the car ?

Sorry never mind - saw it on my phone with no sound the first time, now I have seen it on PC with sound :)

Excellent demo thanks

Thank you very much that was interesting

Great video 👍. Do you suffer with any dashboard rattles after cutting out that bracket section of the dash? Regards

ive just ordered a new headunit for my C1 but the connectors are just bare and not ISO and I have no idea how to wire it! What kind of adapter do I need to fit it to my existing wiring from the car?

I have a question do you need to by both of them or just comes in the box?

Great video

Question? Did you need to cut the dash as the stereo is only a single din with a double din facia. Just a thought as a single din fits fine with no cutting.

Thank you for your video. Almost one-to-one compared to my radio. One advice, from a noob, please explain about the handbrake wire. I have to pull it out again to link it..

I'd like to install a double din system on my Toyota Aygo, are there any systems you'd recommend?are the Pumpkin, Vanku or Yuntx any good? Cheers

Is it a standard 16 port on back of the original radio? Looking at doing mine got my new radio but looking at a harness adapter to plug in as it’s an android radio, but not sure with out ripping out if the original is 16 pin

Nice one dude 👍

Any chance that u have the dimensions of this particualar radio? I have found another headunit, which i would like to know if IT fits ord not

Très bonne installation et bien expliqué

The ac botton right of the hazard since thatcsr don’t have an AC just a blower what does that connect to because I’m thinking about adding some under lighting in the footwells having that button controller it on and off

I have the 2 din MP5 touch the cheap one, i need to cut that too the grey plastic on the center so the radio it will fit?? Thanks

Hey PJ Projects. I have bought exactly the same facia kit and have followed your video. The kit only comes with 6 screws to mount the side plates to the facia kit and no screws for fixing the radio to the side plates. Just out of interest where can I get these screws? It says on the radio that the length should be no longer than 6mm and looking at screwfix and b&q's website can't seem to find them. Any ideas? Thanks

@user-te1le7ck6b

2 жыл бұрын

small hardware shops or locksmiths may have them

hei, amazing video. im about to buy my first car(citroen c1) i want to know where you got that bodykit for the 2din screen

@Poontang123

3 жыл бұрын

Amazon

@brianschafferandersen8012

3 жыл бұрын

Aliexpress has them chep

@rhysswildlifeanimalsandmor9903

2 жыл бұрын

@@brianschafferandersen8012 they take ages to arrive

Could you explain how you fixed microfone inside the car? And also where the cable of the microfone pass through? Thanks

Hi great video. Just about to do this - did you find that by cutting the mid section that it weaked the dash or console area at all? any movement while driving or shaking etc? Many thanks

@PJsprojects

Жыл бұрын

The owner of the vehicle never reported any problems and it felt firm enough to me.

Hey man! really usedful thank you so much. with Covid Im going to have to do a new car radio install on a peugeot 107 (my current car is an Aygo.. so its all the same!!) I just wanted to ask a dumb question... why do you cut the inside? is it due to the radio needing that space? (obvious but i thought id ask)

@krzysztofkwietniewski9100

3 жыл бұрын

Yep. There is no space there for a 2 DIN radio. This car was never designed to be fitted with a 2 DIN radio so if your radio need some space above the normal DIN designated space behind the front panel you will have to cut that plastic bit. Notice that his Sony radio is in the kinda L shape. Sad that bit that goes inside your car is on the top of the radio rather than on the bottom.

Thanks

Do you have a link for the radio adapter? I need the same thing as you

Hi there. Thx for a great video. What Sony Unit are you installing ? That Unit looks nice 👍 And can you link to where you bought the new Unit holder and the Sony Unit please 👍

@brianschafferandersen8012

3 жыл бұрын

Aliexpress has the holder

What size are the 6 silver screws that hold the face unit to the stereo please ?

Hi mate my radios only come with one saddle that connects to the radio where could I get another saddle that connects to the car? Many thanks

would one of those mechless double din units fit without cutting the plastic bit out?

@brianschafferandersen8012

3 жыл бұрын

I Think so if it is not so deep as the Sony he is installing

Would this process work if you want to install a double din car stereo with reverse camera

@brianschafferandersen8012

3 жыл бұрын

I Think it will you just have to have the cable back in

cool but what do you do about the awful speakers?

any guide for cheapest bluetooth single DIN unit?

Hi. Just trying to identify the power cables from the car itself as I can see a black wire (ground.) and red but no yellow wire ? Wiring an aftermarket Sony (or at least trying to) without success. New wiring loom to stereo has black, yellow and red wires to connect. Have joined the yellow and red cables on the new loom then connected them to the car’s red wire. Have then connected the new loom’s black wire to the car’s black wire but no power going to nth unit, even with ignition on. Would you have any suggestions please ?

@PJsprojects

4 жыл бұрын

Has somebody chopped the original plastic radio plug off the cars wiring? you should be able to just plug an ISO adapter in and everything work.

@darrenshayler1946

4 жыл бұрын

PJs projects hi. No, everything appears as original from factory. I have identified the ignition live, made my own ground and wired in a direct (fused) permanent live to the battery. Even rewired the speakers. The ISO adaptor May have been the wrong one but my son is adamant it was the correct one. Looking at it, the connector didn’t connect to the important stuff. Oh well. Lesson learnt...... don’t let my 17yr old son do stuff without checking with me first 😂. Thanks for getting back to me. If only it had been as easy as just using the correct connector 🤪 👍

Hi, I am a bit lost, do I need a special wiring harness/adaptor to connect the radio wires to the new double din unit?

@sharkeys

2 жыл бұрын

Most likely you will need an ISO harness lead. Usually 5 or so quid on ebay or 15 ish from Halfords.

Can you tell me what this is called and where I could get it from please

I have the Toyota Agyo 2016 1.0 vvt x-press and I have just order the CarlinKit USB CarPlay Dongle,Compatible with Android car system version 4.4.2 or above,Support IOS13/14 wired CarPlay and wired Android Auto Will I need to install autokit on my first before this system can work for Apple CarPlay

Hi thinking of changing my radio in my Aygo can u recommend any one or place I can get it done

@PJsprojects

2 жыл бұрын

Would of thought any local car electronics shop could help.

Please, can you link the double din fascia board?

@traveler_through_life

4 жыл бұрын

aliexpress and search

Do you need a new fascia plate if you only want to install a single din?

@sanil_b5697

3 жыл бұрын

5:35

@KM-vq5zc

3 жыл бұрын

Sanil _b ??

Where do i find a wiring guide ?

Is it Bluetooth connectivity?

Do u need a seperate ISO harness, if so which one>?

@owenarmitage2240

3 жыл бұрын

Did you find the answer to this ??

Hello, would you happen to know the exact name of the part you're cutting off. As I'd like to be able to buy a spare when it comes to selling the car as I'd be taking the double din stereo with me. Can't seem to find it. And do you think I'd be able to glue it back on if I couldn't source a replacement unit?

@Poontang123

3 жыл бұрын

Just sell it with double din in it 😋 not worth the hassle for 150 quid

Any idea why it loses memory and resets to default settings each time ignition is turned off? Any help appreciated?

@PJsprojects

3 жыл бұрын

You need to swap the red and yellow wires so that red goes to yellow and yellow goes to red.

@Poontang123

3 жыл бұрын

@@PJsprojects thank you. Done! But touched the pliers on the back of the stereo and popped the 15amp fuse under the hood. Doh

@ISSYOUTUBE1

3 жыл бұрын

@@PJsprojects where are the red and yellow wires? I’m getting same issue

@jairolenze11

3 жыл бұрын

@@ISSKZread1 from the harness that usually cames with you radio

How do u say it aygo or eyego

My radio keeps resetting everytime i start the car could you tell me the easiest way to fix it in detail mate

@MCJimboy10

3 жыл бұрын

You need to swap the red and yellow wires so that red goes to yellow and yellow goes to red.

@jairolenze11

3 жыл бұрын

hi m8, what car do you have?, im just about to install a pionner radio on a 107, and hear the same about reverse the yellow and red cables from the harness

Does anyone know the name of the blue inserts to secure the mount?

@PJsprojects

Жыл бұрын

Would be a case of asking a main dealer for the name or part number. They should have planograms showing them.

Can you do it without cutting part of the car

@PJsprojects

4 жыл бұрын

Sadly not.

I put navi in my 107

Does anyone know how to skip a song on aux in a Peugeot 107? I can only do it on my phone :/

@curtis8516

2 жыл бұрын

Not possible via AUX, only transmits audio not data.

Has it got Bluetooth

@Poontang123

3 жыл бұрын

Yes these sony stereos have BT

I strongly suggest you to not do this on your 107, Aygo or C1. It will get stolen. I had this for a week and it got stolen. Got left behind with a repair bill of 2000 euros, since my door was scratched and the lock was broken. Needed new locks and a repair paint job. Also needed a new middle console since it got stolen too. Luckily the insurance paid for it, but it was not fun.

@BjornLoenen

3 жыл бұрын

What countryv

@Jgrvo

3 жыл бұрын

Peter Pan The Netherlands 🇳🇱

@BjornLoenen

3 жыл бұрын

Jens fuck ik heb zojuist een dikke pioneer ingebouwd en heb geen diefstal verzekering omdat dat nogal scheelt in de verzekering met 0 schadevrije jaren 😅. Hopen dat t bij mij langer goed gaat, waar gebeurde het bij je?

@Jgrvo

3 жыл бұрын

Peter Pan in Hoogeveen, op parkeerplaats van het station waar best veel mensen lopen en het er over het algemeen best overzichtelijk is, geen duistere en “achterbuurt” parkeerplaats zeg maar. Ik had ook geen diefstalverzekering, maar heb aangifte gedaan bij politie en ben daarmee naar de verzekering gereden (lokaal kantoortje) en die hebben mij een bedrag uitgekeerd die hoger was dan de waarde van de ingebouwde radio unit. Dus was wel geluk bij ongeluk.

@BjornLoenen

3 жыл бұрын

Jens dat is wel heel zuur man. Wanneer gebeurde dat dan? En wat voor een radio had je?

Radio would be worth more than the car

@RICHARD26CARL

4 жыл бұрын

clearly not

This beautiful radio is overkill for this car with it’s minuscule loudspeakers. Btw, if I decide to install this radio it will be stolen from the car within two days.

Radio costs half the money of the car :D

when u actually cottin

For the life of me I'll never understand this stupid choices! Unless you need the additional screen area for reverse cam, nav system, etc. Why in the world butcher a car, spend money in adapters and so on. Just to have a big screen on an otherwise "normal" radio unit...

@aeonkoko

3 жыл бұрын

And bluetooth

@harisalic2568

2 жыл бұрын

The original radio is barely usable, it has not bt or any connectivity besides aux and also sounds horrible. A single din would suffice in this case, the double dins without rev cam or nav are useless imo

@Shagnasty1956

Жыл бұрын

@@harisalic2568 Horrible is an understatement, its positively horrendous!