I love the scx24, but I'm sorry, for them to come out with another version and not address that steering servo that literally everyone has problems with is just idiotic

@gregarnone

6 ай бұрын

Classic Horizon Hobby blunder.

@SteadfastRC

6 ай бұрын

@@gregarnone for sure dude, you and I are sharing a brain right now

@anon556

6 ай бұрын

Kinda agree and kinda don't. The stock servo is fine for a stock truck. It's only when you start to add weight that you're pushing the servo beyond it's capacity. Most people have absolutely no interest or intentions of modifying their rigs at all. They will run it exactly how it came out of the box until they get bored with it and get something new. For those people, who are the majority of consumers, the stock servo will be perfectly acceptable. If you are the type of person who desires to upgrade and tinker with your rigs you already know the steering servo is one of the first and most important upgrades you can do. So do you want axial to charge you more for a servo you will still change out anyways? Or do you want them to charge you the least amount possible and give you an acceptable servo to use the rig out of the box because you and them both know you're going to upgrade the servo anyways. Whatever servo they "upgraded" to would undoubtedly still be worse than any aftermarket offering and you would still just replace it anyways. So instead of having a crappy servo in the parts bin you'll have a slightly less crappy but more expensive servo that you'll never use again 🤷‍♂️

@SteadfastRC

6 ай бұрын

@anon556 I have had 10 different scx24, every one of them the servo has burned out before I got through five batteries, most of them were in stock form until that point

@anon556

6 ай бұрын

@@SteadfastRC you have severely horrible luck, you're being dishonest or you absolutely abuse the hell out of your rigs. I've had 7 scx24 and 2 ax-24 and I've never had a servo fail except for one that was DOA and didn't do anything at all. Which was replaced in 3 days for free 🤷‍♂️

I love that they’re still paying attention to this little rig, I have two and they’re lots of fun. However, now that the 18th and 24th scene has so much competition, Axial really needed to step up their game and I just don’t think they did. The oil shocks are a great addition, but I think they really needed to do more. Thanks for the informative video!

@duramaxdad

6 ай бұрын

They gave us smaller tires too. Be happy.

@redteam65

6 ай бұрын

Unfortunately they’re never going to have to really compete bc the entire market is already on the scx24 as the standard. Plenty of other companies have better out of the box performance but none of them have the aftermarket support.

Was gone from the scx24 hobby for a bit. Happy when I came back to a new scx24!

Same weak motor and servo, and its minor but a body pin instead of Velcro. It'll sell because it's a Jeep but the SCX24 is way behind in the market now compared to other micro crawlers.

Hopefully they release the oil filled shocks seperatley as an option to upgrade the older versions a lot of us already have.

@americaweare9561

5 ай бұрын

I just did this they did

Another $75 gets you to a Furitek FX 118, brushless with FOC, its a game changer. Thanks for the review as always.

Tires look good, didn't expect it to change the look so much. The old electronics are a bummer, but its an RTR. Not sure what people expect for this price point.

Thanks for the update brother. I turned my Deadbolt into the Gremlin. Still rolling the stock Nitto tires for the overall all terrain capability. It only takes a aftermarket motor and a Injora servo, along with a little strategically placed weight and the SCX24 is a beast. Way more fun to me than a big crawler. Happy new year.

Axial needs to drop a PRO KIT SCX24 version! No electronics, but with beefed up components! Like if you agree!

Its about time they added oil shocks. I have already added them to my custom SCX24 Pinto but its good that people new to the hobby will get a good start now.

Thanks for the review Greg! I’m glad to see Axial putting the oil-filled shocks on more rigs. I have all the parts to upgrade my V1 SCX24 Jeep to Furitek brushless, Pro-line shocks, and Reefs Micro 99 servo. Seeing the V3 factory upgrades I am thinking about getting another Jeep to keep stock for the kids to use. Love that green colour too.

Looks like the oil shocks are a little shorter length also not sure what’s limiting the suspension travel for articulation on that new version. Either way, new changes or not these things are fun. Any version just throw a little bit of extra cash and it becomes a beast. Parts are really cheap. Just do 1-2 mods a month for $20-$40 if you’re on a budget. My recommendation for any first timer for mods in order but doesn’t have to be is: -39mm oil shocks -weighted diff covers -metal gear steering servo, “EMAX ES08MA II” is nice and affordable, will need to mod stock mount or buy a $10 aluminum/brass servo mount to fit the slightly wider servo. Also will need to trim the servo ears at an angle for clearance on the chassis (stock servo is plastic gears and it will shred the gears in there when doing a lot of crawling with any added weight) -metal steering rod links for that tight turning response and slop removal -weighted beadlock wheels (injora has some nice ones) -tires (highly recommend proline hyrax, they’re well rounded for all surfaces for great grip and cheap for a set of 4 with plastic beadlock wheels included at $20) -high clearance links -and everything else you want out there! Sky is the limit and have fun! Injora has a $38 kit that has weighted diff covers, weighted steering knuckles, metal steering rod links, and 4mm hex extensions for a wider track/stance if interested. Thanks for the video my dude. Love the reviews and content. Keep em coming 👍🏻.

Nice little rig, good video, adding Brass makes a big difference to the little uns i added 183 grams of brass to my FCX K5 and it works well

They need to do a different transmission on the scx24s, maybe like a two speed or digital function like the scx10s

Well put together video but have to agree with others here as other companies are killing axial in the mini crawler market.

Oh wow i can't wait to see a 1000 KZreadrs review this not different scx24

It is pretty cool. The new colors are nice. I think ill get the green body when it is out. As far as the servo and motor goes, a metal geares servo would be nice. Keeping the same motor is the best option since there are way to many motors out for axial to pick one. If they did upgrade it people would complain for not picking a motor they like.

That green is just nice my first RC was a SCX 24 JLU it is highly modified & has a Furitek motor in it I don’t take it out much anymore but I always have a spot for another one being it was my first RC ya kind of have a soft spot for it.

I still want an fcx24 more.

Nice that they've updated it but the game has already moved on and the SCX24 has been left behind by the competition.

Me personally I would through in the thinnest shock oil you can, and that’s what I liked about the last version is that they didn’t have oil so it made it look more realistic now it just looks stiff

I love the scx24s. However i do feel like axail is behind compared to most rc companies. Compared to companies like Fms and hobby plus

Nice vid. I think the wheel upgrade would be better in black. Chrome is so old school. Love the oil filled shocks. 😊

It pains me to say this but the TRX4M has this beat still.

@daylightdies7194

5 ай бұрын

Yep agreed and im no fan of traxxas 🇬🇧

I think there are better options than this car, the only little improvement is noticeable, it is better to wait and buy something second-hand or as I mentioned, there are better options from Chinese brands and even with double brands and better improvement options.

The market is ripe for a SCX24 Pro and Axial has the Horizon catalog at its disposal. Make it happen!

Another great video and drive.

Wish they would upgrade the servo and motor. Good video like always.

Ive got a sarge green 392 this is perfect to match my custom 1/10 in sarge!

Great content like usual. Just curious if that’s the still river greenway trail off of silvermine rd.

I really like they put oil filled shocks. The V2 electronics are still my favorite however. I'm definitely disappointed they didn't update that darn servo or motor. Great Video 😎🤘

@backyardscaler

6 ай бұрын

Yea man I V2 swapped all my v1s so much better

@anon556

6 ай бұрын

That spektrum ESC is garbage. Far from an upgrade.

@duramaxdad

6 ай бұрын

Blue v2 electronics r smooth as butter on slow crawl.

Looking good❤

Thanks for the review. Great little crawler. I'm just getting back into RC and might get one of these and do the upgrades. Are the hex hubs 1gram each or the weight for both?

Need for a easy too programming waterproof foc brushless set from the factory.I like the slightly smaller more scale tires! Now its more controllabel because of more torque from smaller tires.

Great to see a big company go back male some much needed changes to an already solid platform. Albeit a little to late but the scx24 is still a strong contender!

Careful with those usb chargers don’t leave them unattended they get Smokey hot

Thank you for the review Greg. You said it's using the SLT protocol? Does that mean it will not bind to the DX5? Or am I confusing it with the tactic SLT protocol?

Im not into the 24th scale stuff although i did buy 2 C10's for me and the kid and fell down that rabbit hole of aluminum upgrades and other accessories, we never use them but they look cool sitting there...LOL..But they are cool trucks stock or upgraded!!!

I love these little crawlers they are addictive. I just bought the Axial Power Wagon based on your review but I have yet to run it. Do you still have any publications in print or is it all digital?

The OG pay some respect people... the one that started it all

In 2024 What would be some of the best tire choices for grip, especially smooth surfaces like rocks? Any really soft, sticky compounds that stand out? Im looking for an average size, not a larger tire. I'm new to crawling and i'm trying to get the best tire on the first try without having to switch to something else later.

I have the scx24 v3 gladiator in blue!it is so good stock

Anyone getting the hex adapters, be aware of the screw pins. They strip extremely easily and are a completely different bolt size versus the stock bolt size.

@duramaxdad

6 ай бұрын

Screw pins r the new wheel nuts right? The fronts r shorter and strip. Rears r fine. I ordered more so I have extra when I lose em.

Nice vidéo 👌👍

How do you know if an SCX42 is v1, v2 or v3? (Especially when ordering online.)

Would love to see a V2 and V3 comparison getting in to the nitty gritty. My experience with the V2’s electronics were great. Just got this V3 and gave the V2 to my son… I miss the smoothness and sensitivity of the V2’s electronics… Would love to know if you have experience with that or if it is just my particular unit. Cannot get as “slow” of a crawl with V3 unit AND i was noticing the throttle was inconsistent or ‘looping’… that is, I’d hold the throttle at the same input, and the wheel speed slow down and then speed up a bit at a consistent interval (maybe every second and a half or so). Any experience with this?

Will this bind to a DX5C or DX5 Pro?

RC4WD for the win

those oil shocks do make a good difference, especially in how it looks whilst driving. that wobbly look has gone

Oil in the shocks ! 😊

Wait, so you could buy the V3 shocks and just throw them on the V2?

Did the delivery driver drop kick the box up onto your porch? 🤣

@rcdriver

6 ай бұрын

Yeah, the shipping box was pretty mangled. I got a box from AE the same day that was even worse lol.

@LIFEISHARDSTUPID

6 ай бұрын

FedEx is the worst in my neck of the woods. They don't care. I've confronted a few drivers, and their excuses are too heavy, so they drop it on the concrete porch. I can go on more, but delivery drivers these days suck, not all but a good amount.

When is the release date for this

Why haven’t they updated to the Velcro design for securing the body?

I have a concern regarding version 1, version 2 and version 3, which was the last one they released, each of them has different electronics. Version 1 The touch is not as progressive but the receiver compensates for it, especially by having a second channel where without need to change control or other components can be converted to a brushless motor, easily and economically, then version two brings different electronics where the feel is better compared to accelerating the vehicle is more progressive but lacks channel 2 if you want to modify The electronics require changing all the components which greatly limits it. The control is digital, particularly I don't know how accurate or convenient it is. My main question is related to the latest version 3, which again changes the electronics to a spectrum and changes the control. Can you please tell me if this electronic also has channel 2 as well as version 1? Can this version number 3 also install a brushless motor on channel 2 without having to change the remote control and other electronic electronics? I am undecided between version 1 and version number 3, the last one that Axial released in its SCX 24 versions. Thank you very much for your suggestions.

When will this be released?

I bought one for my kid to play with. After first tine using it, battery went bad/wouldn't charge. Went back to the guy i bought it from, bought a upgraded battery, used it once, then it wouldn't charge right. Am i missing something? Is the charger crap or am i just unlucky?

Good stuff Greg. Hit the like button folks.

I wish the would’ve added a interior & driver like the SCX 103

Might also been nice if they did away with the clip and did the Velcro or just put a small magnet to close it.

Got mine for Christmas, how do you know if it’s the newest version or not?

@m1caudill

5 ай бұрын

Color…new green and grey

Is the this video stock out of the box? The purchasing link doesn’t get us to the right car!

Axial needs to consider that nearly every person is going to upgrade the servo and then the front bumpers dont fit, they need to move it back or extend the front. Do they just not know that anyone who owns one of these for more than a day is definitely going to swap it out for an emaxx or ecopower?

to be fair the amount of money axial/horizon wants for their hop ups you can get 4x the parts for the price with other companies. At the end of the day its about the smile on your face not how much you spend. would have been nice to mention that there are thousands of other parts out there for purchase.

Wow, kind of a letdown. Sorry to say because I really love all my scx24 rigs but still the same motor and servo. I think they could’ve done better.

I need those oil shocks, they should’ve used them in the first place

Well, I guess the accounting dept. has officially taken over Axial. With the competition clearly making some of an effort to listen to clients and 1/18th making a huge surge, I guess Axial has just given up and is going to empty 1/24th parts supplies and run the clock down on contracts. Then do the corporate belly flop and fold. Anyone else thinking of cutting there losses, and move to 1/18th rather than spending anymore on 1/24th?

I own 2 scx24, but cost me a lot to get performance I wanted, oil shocks should of been implemented long ago. Same crap servo and underpowered motor. Hell the hobbyplus cr18 evo pro, makes this look like a toy. Come on axial, listen to your community or be left in dust.

That spektrum esc is junk (really every spektrum product is junk) 🤔 very big downgrade from the V2 in my opinion in terms of performance.

😂 is this a joke😂 they make small changes to get rid of the stuff no one buys. Same with trx and their ultimate line and now vanquish seems to be heading that way. Aftermarket will always be key to them having a customer base, they need to get over it and support them.

watching from the 413

FMS and Traxxas have to be happy to see that Axial has decided to go back to it's small, under powered, Lexan body, with no two speed, no headlights, no tail lights, an old chassis. It looks like they're just trying get rid of old inventory. Major fail by Axial.

Axial needs to get its act together. Now there has been so much good from other companies, that this doesn't measure up.. I've always been an Axial fan, but now I don't know anymore... sorry Axial 👎

A BABY SXC6 😂😂

i'm sorry, but my 20th scx24 was the powerwagon. the shocks may be better, and by better i mean just less bouncy. the esc is WAY worse, making the esc pull less amps so you dont burn out motors isn't the way to make something better. on top of that the throttle control on it is horrible. toss a V2 into any of these new trucks and see the difference yourself. these new ones are worse than the good old v2 rigs

@ChrisDoll

6 ай бұрын

but i do love how the one major mechanical change wasn't mentioned, the pinion and spur gear changes

Why can't they give you dsmr on the esc, It would have been much better.

Wow, How do they come out with a new version and do nothing about that horrible servo? Disappointing.

Tbh they did just make a new version nd didnt fix the servo or the motor that both burn out or break as soon as u add weight to make it perform but theres 2 things that need changed ass soon ass u do sum to it or just wana b safe but why make the wheels smaller less clearance on the axles ?? Come on axial

They could have made it better should of put proline tires on it added some sclae accessories to it as well Honesty kind of a waste for them to produce this

I'm not sure why. I want to even buy this vehicle in the stock form... since everyone changes just about every single part!! Why not just buy the vehicle in pieces from the beginning and save having all those stock parts that nobody uses???

Them servos are absolutely garbage. For the price of these (I have had all of scx24 models available) the FCX24 series is a better value. I've got he k5 and lemur. Way better rigs for the same price point.

The fairRC batrazzi fcx24 is the mini crawler to get

Wow, i dont know what I suspected from axial but these is really lame.

Pass

Same old crap

Not worth it

I have a 1/24 Gladiator from Axial, I have a Traxxas 1/18 defender, I have a FMS Unimog 1/24 (1/18). Frankly ?!? Buy an FMS, you won't get anything better, Axial is completely outdated today.

Same junk servo n motor what a joke 😅😅😅

Big fail. FMS is embarrassing axial.

You got this BS sent to you and now are saying good things. I know dang well this not a good product. Channels like this are garbage and terrible for the hobby, have some integrity.

the colors are ugly

Another damn jeep 🤮 & why can’t they figure out how to make the receiver/esc smalller like a furitek? I’m kinda over the axial’s they never really come out with anything new. Idk a lot better options than this out there!

@shaynejenkins446

6 ай бұрын

Its still the one dominating sales and winning 1/24 comps.

It’s the same fuckin thing just smaller tires hobby plus is blowing their ass out the water

@shaynejenkins446

6 ай бұрын

Not even close. Hobby plus makes knock offs.

@DoubleDownDBo

6 ай бұрын

I'll take a hobby plus any day over this turd!