58MM Shocks on the SCX24 - HUGE FLEX - Review, Installation, Shock Setup & More!
Автокөліктер мен көлік құралдары
In this video I check out the new 58MM long travel shocks for the Axial SCX24 made by PowerHobby! These things are massive! I compare these to 43mm and 54mm shocks and install them on Axel's monster truck SCX24 Gladiator and my blue Jeep Gladiator. I put both rigs on the bench for an articulation test and on the course for some run tests and crawling footage.
58MM shocks: www.ebay.com/itm/304704290321...
Affiliate links:
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.com/discount/Cap... - discount code Capecrawlers
10% off the FMS FCX24 Power Wagon: www.fmshobby.com/products/1-2... - code Capecrawler10%
Amain Hobbies:
5% off any Injora products: www.injora.com - code Capecrawlers05
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Пікірлер: 212
Timestamps Close look and comparisons: 2:02 58mm shocks on the Monster Gladiator: 6:13 Install & setup on blue JT: 9:00 Gladiator articulation: 12:43 Course runs: 15:33 Final thoughts: 20:29
Your videos and tips have been HUGE for my scx24 build. Thanks for all your videos!
@CapeCrawlers
Жыл бұрын
So glad to hear! Thanks for watching!
I did this mod on my SCX24 "Punisher" build. What a difference and a lot of fun to drive. Thanks for mod!
These would be great on the two big builds you have! 🤯
That was a great articulation shot right there, yeah buddy we’re here watching
@CapeCrawlers
Жыл бұрын
I’m so glad I built that section of the course the way I did. It is perfect for those crazy shots!
Man those things are crazy long! Maybe even too long. I might have to get some to try them out. Thanks for another great video Adam, take care!!!
@CapeCrawlers
Жыл бұрын
They are outrageous! It’s worth trying just for the shock factor
That flex is insane! Good job 👌🏼
@CapeCrawlers
Жыл бұрын
Thank you! This one is still my all time favorite.
I think you accomplished what you were after Adam, max flex!! I love your how to videos, keep up the great work brother
@CapeCrawlers
Жыл бұрын
Thanks! I agree, I think we’ve hit the ceiling!
Awesome as always great work keep doing what you're doing the video's are awesome
@CapeCrawlers
Жыл бұрын
Thank you, I appreciate that!
CRazy! I might have got to 70 degrees. A single limiting strap in the center rear would allow max flex but also keep the body down. The axle would only drop half way but each side would still get full flex.
@CapeCrawlers
Жыл бұрын
It’s nuts. I will do just that: single strap in the center, mimicking the front setup.
Your setup is so cool. Love it
@CapeCrawlers
Жыл бұрын
Thank you! It’s been such a fun project
Awesome video these shocks are sick and one thing I should tell you is at the beginning the audio and video was a bit out of sync but during axels (correct me if I’m wrong on the name) run footage it was perfect same for the rest of the video one thing if you put really skinny width tires I think it would flex even more I could be wrong though also you should do a tour of your workbench, crawling tables, and RC cars
@CapeCrawlers
Жыл бұрын
Thanks! I caught that audio glitch. Not sure what happened during the upload but at least it was only one spot!
Yeah not bad, wow she’s performing great dude
Well I just picked up my first SCX24 and I had to get that cool little 1967 Chevy C-10 😁 I also picked up some Brass Knuckles, Carbon Fiber Suspension Links a stronger Servo and Servo Mount and some Hot Racing Double Barrel Shocks. Also got some Proline Trencher on there Bead Locks and I got some JConcepts Tusks. I have quite a few 10th Scale but this is my first 24th Scale. I don't think it will be the last because my Daughter said she wants one and my Girlfriend also said she wants one, so looks like I am going to be busy for a minute 😂😂😂 thanks for your Videos they are a world of help, also you have a AWESOME name. 😁🤣🤣🤣🤣
@CapeCrawlers
Жыл бұрын
Thanks for watching! Have fun going down the mini crawler rabbit hole!
@adamrodgers2377
Жыл бұрын
@@CapeCrawlers I fell into that Rabbit Hole head first 🤣
Thanks for the awesome video on these! I'm planning to get a set for my comp rig when they are back in stock! They will be perfect, as I need the extra compressed length as well as the extra flex! Are they still holding up well? Man, my rig is going to look a ton like the Gladiator! Next mods planned are these shocks, Mini Komodo, RCAWD Portals and Swamp Kings!
@CapeCrawlers
Жыл бұрын
They’re holding up great. Love them on the gladiator!
@mr.dillpickle
Жыл бұрын
@@CapeCrawlers Awesome, thank you!
That gladiator with those long ass shocks is insane.
Your cool dude you seem to have same kinda learning as me.. Nice vids... Great fam best of luck and keep going ... Smiles ..... Lika brother from another mother ! Lol much love .....
Awesome!!
@CapeCrawlers
Жыл бұрын
👍🏻👍🏻
my guy! way to throw your weight around and influence the industry! does this make you an influencer?? :P are these super LT shocks the same length as the TRX-4m shock towers? congrats on your newfound power!
@CapeCrawlers
Жыл бұрын
LOL making big waves in the micro market 🤣 the shocks are longer than the trx4m towers. I have another set of shocks on the way and I’m going to try to get them onto the trx4m bronco.
Love you sons driving style!
@CapeCrawlers
Жыл бұрын
Haha flat out, all the time!
Nice flex thanks guy
@CapeCrawlers
Жыл бұрын
Thanks for watching 💪🏻
Real question is what is max needed in any scenario, but you also have to factor weight distribution since the more of an angle it sits at the more it'll wanna roll before reaching max deflection. Pretty interesting to see this portion of the hobby exploding right now. I believe the resulting development will be rapid initially.
@CapeCrawlers
Жыл бұрын
Very insightful comment. When you say this portion of the hobby, are you referring to the mini crawlers in general, or the crazy flex we can get out of them?
I love the idea of rc crawling, but I found out im too impatient and trigger happy to slow crawl. I basically gun it through everything and don't try to be realistic, but I still like watching
@Specimen-music
4 ай бұрын
that’s real asf 😭😭
@mxgnification8203
4 ай бұрын
You can still have fun running crawler lines driving like that, that’s more of a rock bouncer driving style. I have an scx24 just for that type of driving, quick with the ability to slow crawl when you need it. Sometimes trigger happy can get you to hop over some lines that slow crawlers just can’t if you got your rig setup right, that’s where I have my fun. Kinda bash crawling lol.
the flex on these are impressive! I just got my first crawler, trx4 traxx and I like it with the wheels, waiting for more snow to break in the traxx but these are cool. Maybe some wheel weights would help?
@CapeCrawlers
Жыл бұрын
Those track setups are awesome! Wheel weights almost always help 👍🏻
I’m wondering if you take off the cap the rods would pop out some so it can sit lower. If that makes any lol
@AddictRC
Жыл бұрын
if you took the caps off it would be impossible to mount enless you welded or something onto the shock body
@CapeCrawlers
Жыл бұрын
You almost need a triple barrel design where you could have another layer of collapsible structure. It would be like a nesting doll at that point 🤣🤣
@Stupidthingsrc
Жыл бұрын
@@AddictRC oops I didn’t think of that lol
Sheeesh !that’s nice !
@CapeCrawlers
Жыл бұрын
Flex for days!!!
Try the spring trick on the rear it keeps the back end down ( stretch the springs over the top and bottom of the shock)
@CapeCrawlers
Жыл бұрын
The spring mod! Yes I should try that. It’s a loooong stretch for the stock spring though
Those shocks are insane. I’m gonna grab them and throw them on my Bronco.
@CapeCrawlers
Жыл бұрын
They sure are and I love it! 🤣👍🏻
Hey Cape Crawlers, this may have been answered somewhere and I missed it, but do you use stock drive shafts for your builds? How do you keep them from falling out when flexxed out? Love your videos man! It's what got me into 24th scale crawlers!
You should make a full build video, I want mine to look like that someday 😂
@CapeCrawlers
Жыл бұрын
I’ve got one from earlier in the year. I should do a new video though because a lot had changed and it’s a pretty frequent request.
Great video as usual Adam, what about your wheel and tire set up? Finally went and got a new project, a blue Gladiator!
@CapeCrawlers
Жыл бұрын
Thanks! The wheels are Mofo RC UPW and the tires are LGRP swamp kings
How do I keep the correct angle for the rear differential? Is that shocks? My drive shafts keep popping.
Amazing flex Adam i was wondering what flex blades you were using?
@CapeCrawlers
Жыл бұрын
Thanks! I am using the Mofo RC flexblades XR.
Thank you
@CapeCrawlers
Жыл бұрын
Thanks for watching!
@mushee1140
Жыл бұрын
@@CapeCrawlers no problem
the dual spring is great. The spring bind from the 48s were real. Oh...collar bind. lol
@CapeCrawlers
Жыл бұрын
Collar bind.. a whole new complication!
@sonorangaming449
Жыл бұрын
@@CapeCrawlers that it is. In surprised powerhobby isn't making fcx24 parts yet.
What if you pulled the blades out of the rears? You think that would help?
I put mine on and the driveshaft keeps coming apart how would you guys fix this
Thats another level of flex 💪🏻. What do you think is the best performance wise scx24 shocks, 58mm?
@CapeCrawlers
Жыл бұрын
I think it's more like 48mm. Even shorter if you want true all-around performance. I feel like getting into the 50+mm range the collapsed length of the shock starts to be an issue.
@ExtremeRcOffRoading
Жыл бұрын
@@CapeCrawlers Thank you for sharing your insights! I appreciate your perspective on the shock length and the consideration of collapsed length. It’s always great to hear different viewpoints and experiences.
Great video, much appreciated. Will those work for the new TRX4m?...I'm looking to get more travel/articulation out of my bronco. Thanks
@CapeCrawlers
Жыл бұрын
They will with some work. If you check out my TRX4M upgrade videos you can see how I got them to work
Hey man, have you heard of the RedCat Danchee yet? Its like the same price as scx24's and would be awesome for the little man. 1/10th rock crawler that comes with 4 wheel steering, motors on the axle so its really low cg. The twist on your Glad reminded me of it, its like that outta the box!! Super under rated Rc I gotta say. :)
@CapeCrawlers
Жыл бұрын
Yes! I saw one all twisted up at my local shop and fell in love with it! I'm thinking about getting Axel one for Christmas. And by him, I mean me LOL
so cool
@CapeCrawlers
Жыл бұрын
Thank you!
I always wondered if you could just run limit straps instead of shocks since your not really using the springiness of them, that said I don't know what I'm talking about, just a though I guess. Loved the video!
@CapeCrawlers
Жыл бұрын
Thanks for watching! I've been asked that before. The benefit to the shocks is that they keep the axle straight. With just limiting straps I think it would be too floppy and you would have linkage binding and driveshaft loss due to horizontal movement. The shocks are stabilizing limiting straps essentially.
What motor do you suggest for a gladiator with just a little extra weight and bigger tires? I’m new to the 1/24 scale stuff and have no idea what to get
@CapeCrawlers
Жыл бұрын
The LGRP reaper is a great motor. A good mix of speed, torque, and control. Mofo RC torque beast is also an excellent motor.
Now I would say the better option would be the 59mm trx4m shocks from injora
Have you thought about trying these on the trx4m. I know there shorter over all but if they were frame mounted would they provide more travel than stock?
@CapeCrawlers
Жыл бұрын
Yes, I’ve got a black set on its way for that exact reason! I’ll do a bronco update once I get them on.
Hi there, do you know how to remove the pivot ball from the shock eyelet? Thanks much!
@erinyorke6774
5 ай бұрын
You have to remove the O ring to take them out
What do you do to keep the front drive shaft from coming out with the long travel shocks?
@CapeCrawlers
6 ай бұрын
Limiting straps. Check out the LGRP limiting strap setup.
How are those scx24 portal axles? Any good
Do you have any issues with the front driveshaft popping out? I have pretty close to the same setup and my front driveshaft just isn't quite long enough and likes to separate.
@CapeCrawlers
Жыл бұрын
I use a limiting strap to control the driveshaft. LGRP makes a great one: littleguyracingparts.com/products/lgrp-brass-limit-strap?variant=44997674893624¤cy=USD&gad=1
100th like!!!! lets gooo!!! digging those shocks!!!
@CapeCrawlers
Жыл бұрын
Thanks! The shocks are epic
Do you have a video that describes all the parts you have used in this build? I'm interested in doing this to my jeep crawler. Its stock. My daughter loves them. She would be so happy to build it up like the blue gladiator you have
@CapeCrawlers
Жыл бұрын
I have an older build video that’s pretty comprehensive. The build list is in the description: kzread.info/dash/bejne/p3V7uNGjo7GnlMY.html I will do an update video soon!
When you fully compressed them in hand was it the shock that was the limit? It looked like the spring was fully compressed against the preload ring
@CapeCrawlers
Жыл бұрын
Yes it's the shock body itself that stops the compression
Does anyone know if this suspension setup is possible on a scx10III? i cant find anything even similar to this but i want to test the limits.
Are you running portals are the Blue Glad? If yes. which brand? Shocks looks pretty nice!
@CapeCrawlers
Жыл бұрын
Yes, rcawd brand. Love them!
How is your setup so wide and i cant find these 58mm shocks ... how are you able to do any inclines with the front end drooping that much as i have the same rig almost the same exact setup and im unable to really go on much of inclines and i have 54mm shocks with high clearance links with 4 link up front and nylon portal axles with trusses they are +4mm as well as +5mm spacers with brass wheels and i still dont feel wide enough help please !?!
@CapeCrawlers
Жыл бұрын
I run +5mm treal hex extensions on top of the portals plus the wheels have 3mm extended hubs. As for the incline, I use rubber bands for limiting straps up front. It controls the front end lift and allows for good climbing.
@CapeCrawlers , i just got a scx24 blue gladiator and been doing a bunch of mods like high clearance links, wheels and tires etc but i just got the powerhobby shocks 58mm and i remember in your video that you were surprised that you didn't lose your drive shaft but i do lose my front drive shaft, please let me know what i can do to fix that!!!
@CapeCrawlers
8 ай бұрын
Grab a limiting strap setup. I use the LGRP kit 👍🏻
@Flowyz-n5k
8 ай бұрын
@@CapeCrawlers thank you!
Great video my friend. 58 mm great idea. It is possible to fill those with oil?
@CapeCrawlers
Жыл бұрын
Thanks! No, I don't think so. There are no o-rings inside the body so I think they would just leak everywhere.
@TasosX
Жыл бұрын
@@CapeCrawlers Ok thank you
Can I get that same flex with does shocks with the stock frame or should I upgrade the frame?
@CapeCrawlers
Жыл бұрын
I'm running the stock frame on the gladiator. No need to change the chassis if you don't want to!
I’m gonna get some for my c10
@CapeCrawlers
Жыл бұрын
They're huge, that C10 will flex to the moon!
@henrywood5462
Жыл бұрын
@@CapeCrawlers yeah those PLUS the new rock lizard tires is gonna be CRAZY!
Would you get anymore flex if you put the lgrp 8mmplus axles
@CapeCrawlers
Жыл бұрын
Possibly. The track would just be wider and the wheels would clear the body better which may help.
I’m looking for a set of those 54’s right now but all their barrels are silver and not black like yours. Is this a new version that they’re selling or were your 54’s modified to run black barrels?
@CapeCrawlers
Жыл бұрын
Interesting. It must be a new version as I did not modify mine.
@silverbulletJKU
Жыл бұрын
@@CapeCrawlers thank you for the quick reply! Can’t wait to order my set. I greatly appreciate you clearing that up for me.
is it possible to tune the bronco scx24 a this point?
@CapeCrawlers
Жыл бұрын
I think you could. The body is the limiting factor on the bronco, so if you trimmed it enough, or made your axles wide enough to clear the body, it could flex like this I think.
Cool vid Adam , does anyone make long travel shocks for fcx24?
@CapeCrawlers
Жыл бұрын
Not this long. Rcawd makes shocks but they’re not much longer than stock. The scx24 shocks will fit if you remove the pivot ball hardware and just let the shock pivot on the bolt.
Just tossing a thought out there. What about a swap to the 54mm in the rear with the flex plate you have on already to lower the overall length just a tad? Or even remove the mount and see if that takes a little rear lift out? 🤷🏼♂️
@CapeCrawlers
Жыл бұрын
Thats a good suggestion. 54's with the flex blades would equal out to the front 58's, or close to it. I will try that!
@wesleyrodda606
Жыл бұрын
@@CapeCrawlers interested in how the results differ and if there’s any noticeable change in the rear lift. just came to mind as you mentioned a possible rear limiter strap. I figured it’s a simple enough swap could be worth the test without the need to run one. you’re builds have made me so stoked to get 1/24 crawler and get it actual Moab ready 😅 As a moab local I appreciate the scale moab you’ve got 👌
👀👀 I recently got scx24 bronco what do I need for that flex set up great job bro 👊
@CapeCrawlers
Жыл бұрын
Check out my five tips for max flex video! My best advice in one vid.
What is the point in portals with the portal boxes hanging out there
@CapeCrawlers
Жыл бұрын
You can drive knowing that directly underneath you is big clearance. The portal boxes and c hubs don’t hang up as bad as you would think, but it’s still always a potential snagging point. I’m still happy with them 👍🏻
Do you think I could run these on my comp style FCX24 to improve flex?
@CapeCrawlers
10 ай бұрын
I would look at the 59mm oil shocks from Injora, I think those would be better for the FCX24
@quentinsilas5912
10 ай бұрын
Do you think the FCX24 would hold a drive shaft in with the 59mm shocks? I’m running the grasshopper chassis kit
Can these shocks be used with the lower spring removed so that it droops down and rides on the upper spring?
@CapeCrawlers
Жыл бұрын
Yes, thats how I run them on my sons gladiator and it works pretty well.
@JP-qq2kn
Жыл бұрын
@Cape Crawlers Sorry, stopped watching and left for work before getting to that part of the video lol. I just ordered an fcx24, beadlock wheels, tires, steering links and the 58mm shocks. I was a little worried about the driveshafts falling out from too much extention with the 58mm ones.. is that an issue with these? I know it's an issue on my RGT v2 and 48mm DB shocks. Gotta use limiting rubber bands.
I think using the old shock top would have been nice to get rid of that bulky faux expansion chamber. Looks sweet though, I want to do this to my fcx24.
@blaismerchant8582
Ай бұрын
Lmk how that's gone because I've not seen any shocks specifically for the fcx24 over 48mm
How would these work on a furitek scythe v2?
@CapeCrawlers
Ай бұрын
Yep they would work
Any word on a restock date for these shocks?
@CapeCrawlers
Жыл бұрын
I havent heard anything unfortunately.
what that little thing that 58mm have and other ones doesnt?
Just bought these I’m having binding issues with flex blades. They are angled too much. What am I doing wrong
@CapeCrawlers
Жыл бұрын
Did you use the shock spacers that came with the flex extensions? I have to use those to bump the shock away from the frame and reduce that angle.
@chrisbrown2166
Жыл бұрын
@@CapeCrawlers yea I put them on the chassis With the shock resi on the bottom. As you did. Ended up flipping the shocks upright and removing o rings On each end May of been the flex blades I bought. Not sure
Could you give full build on that blue jeep?👀
@CapeCrawlers
Жыл бұрын
Yes, I will do an update video soon 👍🏻
"This has got to be the limit....." How 'bout cutting your frame so there's a front and back section boxed in. Then put a pivot point in between the two sections........Maybe???
@CapeCrawlers
Жыл бұрын
I like the way you think!
you should put lights on the gladiator?
@CapeCrawlers
Жыл бұрын
I should! There are some halo headlights floating around I would love to try.
If I remember you run the trail kings on your gladiator but I keep hearing you say you run a bigger tire is there a way you can reply with a link?
@CapeCrawlers
Жыл бұрын
DJcrawler recently released a 68mm tire that I’m experimenting with: www.amazon.com/Super-Sticky-Wheel-Crawler-Upgrade/dp/B0C6XXYMJ8/ref=mp_s_a_1_3?keywords=djcrawler+1.0&qid=1688352413&sr=8-3
@robfairbank650
Жыл бұрын
@@CapeCrawlers isn't that what was on the flatbed truck?
What tires do you have on the truck?
@CapeCrawlers
4 ай бұрын
LGRP swamp kings
This is the beezzz neezzz
@CapeCrawlers
Жыл бұрын
🤣 thank you!
Can the shocks fit on to a trx4m
@CapeCrawlers
Жыл бұрын
Yes they can with a little bit of work.
Would they work on trx-4m
@CapeCrawlers
Жыл бұрын
Yes! If you take the pivot ball hardware out you can run the larger trx4m bolts through them and they’ll work
Sheeeesh...I got the 54s...now 58s? Gollee! 🤦🏼♂️ Not sure if I'll upgrade to 58s now. Lol
@CapeCrawlers
Жыл бұрын
I think 54mm is the max of practicality. You can see how long these are at compressed length. They are just too big unless you are not concerned with chassis lift that is.
@RCCrawlerz209
Жыл бұрын
@@CapeCrawlers That's true.
Can you put up a build sheet
That's rad! When you were compressing the springs the long one bowed and put tension on that collar in the middle. Cool idea they had but just isn't functional. Basically at this point is it just the body that's original.
@CapeCrawlers
Жыл бұрын
The dual springs isn't super practical, you're right there. And yes, there isn't much left of this rig that's stock except for frame rails and body.
The shocks come oil filled already?
@CapeCrawlers
6 ай бұрын
They do not. They’re friction damped, no oil recommended
What links are you running, my links wont even allow that much flex?
Adam I hate to break it to you I doubt you can get anymore flex but it wouldn't be a shock (no pun intended) if you managed to somehow get more then 90 degrees of flex
@CapeCrawlers
Жыл бұрын
I will keep tinkering! But I fear you are correct and that the gladiator has reached capacity.
I think my trucks have a lot of flex until I see yours 😅
@CapeCrawlers
Жыл бұрын
🤣 the blue gladiator is otherworldly
@Stupidthingsrc
Жыл бұрын
@@CapeCrawlers yes it is
How much does this thing weigh?
@CapeCrawlers
Жыл бұрын
Around 650g
I thought I was happy with the flex I have.
@CapeCrawlers
Жыл бұрын
There's always more!
I want to see flex videos from the trx4m bronco.
@CapeCrawlers
Жыл бұрын
You got it!
@rampagepr3524
Жыл бұрын
I want to buy the longest shock to have maximum flex without lifting the chasis, I’m planning on running it like you without the spring , what you recommend?
@CapeCrawlers
Жыл бұрын
@@rampagepr3524 the 48mm shocks. Hot racing or powerhobby make good ones. Hot racing being my preference.
@rampagepr3524
Жыл бұрын
Thank you
How much to buy that from you
@CapeCrawlers
Жыл бұрын
Oh man, I can’t sell my little blue baby!
You are my favorite mini crawler guy but you should do a only crawling video
@CapeCrawlers
Жыл бұрын
Thank you! Just a pure crawling video? I can do that
OK, is there anything that challenges that crawler.
@CapeCrawlers
Жыл бұрын
Not much anymore!
180
you're out of flex but how bout width?
@CapeCrawlers
Жыл бұрын
Oh boy, it could go wider I suppose but it already is freakishly wide. Any more and it would look like a mini basher 🤣
Maybe we should just start using 1/10 shocks 🤣🤣
@CapeCrawlers
Жыл бұрын
I’m looking into it actually! 110mm on a scx24… just wait and see 🤣
100* flex
Long shocks make it absolutely useless at climbing tho
@MontyGarza
4 ай бұрын
Did you watch the video that thing was a crawling beast
300th liker
@CapeCrawlers
Жыл бұрын
Thank you!