Timestamps Build plan and overview: 1:21 Baseline course runs: 3:40 Shopping list and budget check: 10:33 Parts overview: 14:08 Installation, tips and tricks: 16:56 I broke it: 26:08 Finished product: 27:46 Upgraded course runs: 29:02 Fully built gladiator course runs: 33:32 Final thoughts: 36:28

@leotruuut245

9 ай бұрын

Can you use the tires without the foams or would they be too soft then?

Another performance booster I’ve found is removing the little ears off the front bumper and fastening it to the frame rails. It sits nice and flush with the body and keeps you from getting stuck so much

@CapeCrawlers

Жыл бұрын

That’s a good tip. The front bumper is kinda annoying on these stock

Ever since i found your channel ive been eyeballing a gladiator so hard , it’d be my first crawler so this budget build video came out at way too perfect of a time ! Keep posting these bro they’re tones of help!

@CapeCrawlers

Жыл бұрын

Thanks for watching! Love the gladiator.

Seeing all these upgrades done at once to a stock truck really brings me back to doing my own initial mods. And also makes me painfully aware how much money and time I’ve sunk into them by this point 😂

@805crawlers

Жыл бұрын

Same here

@CapeCrawlers

Жыл бұрын

It hurts to calculate the investment doesnt it?! It sure was fun to start from the beginning again though.

@timas1364

Жыл бұрын

Hey, you’re not the only one!!!!

@RandyJ

Жыл бұрын

Same I bought my rig 2 weeks ago and let’s just say it not stock and $100 didn’t make the cut haha

@demoths

8 ай бұрын

I recently added up all the parts I have currently installed (NOT including previous parts and spares and whatnot) and I had to delete the document to erase the evidence 😂

Thanks for this and all of the details in this and the other videos. I'm currently watching/listening on repeat. Total newbie here. I attended a local comp last week, watched your videos and ordered your recipe last night and still spent less than a tire for my Corvette. I'm currently taking notes on your install tips and reading the comments. My first comp is the 17th. Friendly local stuff. Thanks Adam!

Awesome! well put together a budget build brother. This is super helpful and informative plus some great tips along the way. I've been looking at modifying my second Gladiator and this video just got over the hesitation hump. Thanks as always my Bro.

@CapeCrawlers

Жыл бұрын

Glad you enjoyed it! Enjoy your build!

Awesome build! With as much as I love doing crazy all out builds, there is something very fun, challenging, and rewarding about getting a good performer on a tight budget.

@CapeCrawlers

Жыл бұрын

Thank you, and I agree. Tight budget and maintaining a scale appearance makes for a great challenge and fun project.

A nice free upgrade you might like to add to this is taking the (drop down front bumper arms) off the front bumper and mounting the bumper directly into the frame rails, it bolts right in and the front grill section of the body sits decently snug down against it. Brings the bumper up and in so it doesn’t stick so far out. you can also trim just a bit off the bottom of the front body grill section to get a more flush fitment, doing this gets rid of that jutting out underbite look and cleans up the front of the rig up really nicely, no problems with servo clearance either!🤘🏼😄

@CapeCrawlers

Жыл бұрын

Thank you, I am going to try that bumper mount trick tonight!

@NuteIlaTaco

3 ай бұрын

​@@CapeCrawlers did you?

definitely one of the most scale clean scx24s that i’ve seen! good job adam you never seem to disappoint!!

@CapeCrawlers

Жыл бұрын

Thank you! V2 of this will be super scale. I’m getting replica wheels, bumpers, mirrors, hood vents, etc. it’s going to be a really cool little truck.

@loganmcneel4976

Жыл бұрын

@@CapeCrawlers that’s rad excited to see it come together!

These videos help out so much! Can you continue this series? I appreciate all your knowledge and the way you explain everything! Thanks a ton

@CapeCrawlers

Жыл бұрын

Thanks for watching! I've since done a TRX4M and AX24 in the series. Hoping to do a FCX24 soon.

Outstanding choice on tires. Have run a set of those on my Deadbolt for a year with stock foams and they still have grip for days. Earlier scx24s had machined fine threads on the pivot balls. The newer ones are coarse thread. Broke a few of them in knuckles as well until I noticed this.

@CapeCrawlers

Жыл бұрын

I am super impressed with the tires! Breaking stuff is the ultimate teacher, right? Lesson learned here!

A very well made video with excellent commentary. Just bought a SCX24 Jeep Wrangler (new to crawling but not new to rc cars) and this video will be a good place to start from for upgrades and tweaks. Many thanks.

Love that. Recently got a little overwhelmed by your and other channels who threw out one expensive and high end rig after the other while i havent even finished modding my first didnt even get to drive it a lot. One item i would strongly recommend is the Injora Underdrive gears, i use them front and rear, gear reduction, slower speed, more crawling power even with stock motor.

@CapeCrawlers

Жыл бұрын

Great idea for the under drive! I think this little motor would really shine with a different gear ratio.

Great video!!! Was looking for a budget build that was also capable! This was the ticket!! Now I can plan and build for the grand children! And as always, great video and keep them coming!!!

@CapeCrawlers

Жыл бұрын

So glad you enjoyed it!

Oh wow she crawls so smoothly. I've yet to buy a scx 24 and look forward to buying one. Thanks for your tutorial it was great.

On my kid's gladiator I put that same motor in and then superglued two heavy washers to the outside of each wheel. I happened to have some that were the perfect fit. I don't know the exact weight, but I'd guess each wheel is as heavy, or heavier than any nice brass wheel out there. The washers completely transformed the rig into a capable crawler.

@CapeCrawlers

Жыл бұрын

Good info! Did you stick with stock wheels for this?

@MrMcSnuffyFluffy

Жыл бұрын

@@CapeCrawlers Yep, just slapped the washers on the stock wheels and tires. Doesn't even look bad. Perfect for a 5 year old, as it pretty much got rid of all of the tippiness.

I really like your videos man. It makes it easy to get my little boy into STEM learning.

Very cool! I just had the idea to make an indoor course for the future and this is just great for ideas. Love it when the mods pay off like that and the end product looks amazing. Quite capable too!

We ran into the same issue with breaking off the stock steering link screw in a brass knuckle.. but because it doesn't thread in real far and brass is softer.. we took a screw that came with the knuckle and pushed it through the threads from the other side.. works like a charm and you still have threads left once you screw hardware in it will catch the threads on the bottom..😎🤘🏼great video man! Keep em coming.

@CapeCrawlers

Жыл бұрын

I should have tried that!

Nice build. It turned out really capable. Traction and weight transfer rule the day. Looks like the stock servo did just fine.

One of the best content I’ve watched. Really enjoyed the budget aspect of it. Guess I’ll be heading over to Amazon. Lol. You made me do it. Lol

@CapeCrawlers

Жыл бұрын

Thank you! It was a really saturated video and I'm glad you enjoyed it. Certainly a fun project.

Excellent upgrades! I'm saving this video. That motor and suspension is something I'd like to do that to my Deadbolt.

I’m late to the comment section here, but I just found your channel. Excellent content, man! I just recently got my first scx24 and now after binge watching some of your videos this weekend I just ordered a bunch of parts to start going crazy. Thanks for all the sweet videos

@CapeCrawlers

Жыл бұрын

Thanks for watching! Have fun with your build!

Great video and upgrade ideas!! Keep up the awesome content.

Solid topic choice bro! Pumped to see your mini version of the 1:1!🤙🏻

@CapeCrawlers

Жыл бұрын

This was a fun one!

This video was awesome! I really like your flagship Gladiator, but these upgrades you've done for the new build are perfect for us beginners. I'll definitely be applying all these starter mods to my C10 SCX24. Hopefully, the only difference is the body so that I don't run into any issues.

@CapeCrawlers

Жыл бұрын

Glad you enjoyed it! With the C10, you will find that the body will become a limiting factor. Otherwise all of these upgrades will directly apply. You may want to trim the fenders to really unleash the capabilities of the C10.

That is a good looking little Rig! & The mods have made it so much more capable. Great video 👍🏼

@CapeCrawlers

Жыл бұрын

Thank you! The transformation was night and day. I was getting really nervous after those stock baseline runs!

@adamrodgers2377

Жыл бұрын

@@CapeCrawlers Yeah it was so cool to see what a $100 worth of good, useful mods will do, and it turned it into a capable little Rig. 👍🏼✌🏼🤠

Great build bro, im watching the video while working on my gladiator . I got injora oil filled shocks, high clearance links , metal steering link , e max servo , metal drive shafts , pro line trenchers with stamped steelies from injora. Awesome video Adam 👍

@CapeCrawlers

Жыл бұрын

Sounds like you’re off to a great start 👍🏻👍🏻

@blastarrow5938

Жыл бұрын

The Trenchers are great, I have a set I keep swapping between my TRX-4M and my SCX24 w/ Injora Rock Buggy chassis. I really should grab a 2nd.

Idk if its just me being cheap but I honestly like the budget build better. Looks a lot more scale and handles it well. The highly modified gladiator is sweet just looks more like a Jeep body on top of a crawler buggy type thing.

@CapeCrawlers

Жыл бұрын

I'm right there with you. I really enjoy the budget builds!

That a good budget build. I am going to get my granddaughter who is 6 one. We are definitely going to do some of these mods. She absolutely loves driving my sx24 wrangler when she comes over.

@CapeCrawlers

Жыл бұрын

I love hearing things like this. So much fun when the kids get involved! Enjoy!

Great project! Love the execution!

@CapeCrawlers

Жыл бұрын

Thanks for watching!

Thank you, for your content and informative videos!! Since I found your channel, I've started my own couple builds. One I'm doing for myself, and one for my son. We'll see what it brings. Doing one build from solely online shopping, and getting the things I see from videos/etc.. Another build I am doing solely from local Hobby Shop parts and recommendations. Kind of a "build-off" to see where each truck ends up. I'm sure each will have their pros and cons!

@CapeCrawlers

Жыл бұрын

That's awesome. Have fun!!

I also work in finance, just bought this rig, and wanted a video just like this! Thank you

Massive performance difference! Cant wait for mine to show up so I can bring some new printed lcg parts and other upgrades to the game!

Great video. Really loved that you kept the scale look. Makes me consider a scx24. Would love to see this style video with a trx4m.

@CapeCrawlers

Жыл бұрын

Thanks! I would like to do a budget build TRX4M. That would be fun for sure.

I literally just did this last night. Took $100 and spent it on upgrades for the Jeep Wrangler. Will be more done later, but got a good start.

@Gboy0141

4 ай бұрын

Can you help me through the process?

Dude I found your channel the day before thanksgiving and you guys inspired me so found a crawler on OfferUp and went to buy it Friday my son and I love it

thanks for all the helpful tips and tricks, me and my friends spend hours in the woods on our homemade crawler course as well as our indoor crawler course with our JLU bronco and c10

@CapeCrawlers

Жыл бұрын

That is awesome! Glad to help

@evanhodel

Жыл бұрын

@@CapeCrawlers how did you trim the fenders on your bronco?

When I replaced the diff cover with brass, i really packed it with grease, helping add weight down low and lessen maintenance for gears and bearings.

I did the same thing with my brass knuckles! They are threaded all the way through, so I just tightened a long bolt in the underside of the knuckle and backed the broken piece out effortlessly.

@garrisonweaver972

Жыл бұрын

May not work if the piece is really wedged in there tight

@CapeCrawlers

Жыл бұрын

I should have tried that!

I was about to ask for a budget build!! Love the new truck

@CapeCrawlers

Жыл бұрын

Perfect timing!

Great idea for a video. Really will be helpful for many people. Now let's see what to do with another 100. Take care

@CapeCrawlers

Жыл бұрын

Thanks for watching, and good suggestion.

Well done video 🙏🏼

Great video, thanks

I really enjoyed this budget build. Picking the best upgrades, with the focus on performance, is most important for those with limited bucks to spend on hobbies....... or if your Canadian...... 🤦‍♂😕😁. EXPIOWA did a great no $ upgrade quite a while ago by carefully heating and bending his stock links into high clearance links. And after seeing donaldsneffe video on motors and servos, there's some good food for thought in those two upgrade areas. And rather than going for longer shock, I think your choice of flex blades was very smart. And if it came down to it, making them yourself wouldn't be hard and you could make them longer or double jointed for even more extension. And to add weight, there's lots of free options like solder wire, steel washers and nuts, etc.

The bolt breaking in the knuckles is the exact same thing that happened to me with my first set of brass knuckles. After alot of research I found out it wasn't my fault it's just those off brand brass pieces. It was really upsetting as my first upgrade though having to go back to the stock knuckles lol

@CapeCrawlers

Жыл бұрын

Such a bummer!

Hey man thanks for doing this, this is going to help me a lot

@CapeCrawlers

Жыл бұрын

Glad I could help!

Really great video , I got alot of knowledge and insight out of thanks

That’s one beautiful Scx24 Gladiator. 👍👍👍

@CapeCrawlers

Жыл бұрын

It came out really nice!

Yessaahh 🔥 excited

Fantastic video… thanks

Adam great build for the money I definitely got to get a hold of that battery tray ESC Trey swap thing I’ve done some Jimmy Reagan shelf with that. Looks like a really nice clean upgrade for 12 bucks and whatever thanks for sharing that Another cheap trick did to my gladiator and my jeeps as the bumper melt flip-flop, flip the bumper mount, and then flip the bumper, raises the approach angle dramatically, and I even remove the rear bumper to get that angle to improve. Also love your truck now sick brother olllllllo

@CapeCrawlers

Жыл бұрын

Thank you! Great tip for the bumper too!

Awesome video Adam!

@CapeCrawlers

10 ай бұрын

Thank you!

@deanweller5789

10 ай бұрын

@@CapeCrawlers Hey Adam, If my esc dies, when i replace it do i need to buy a new esc and controller? or can i buy just the esc? Also where do you buy these from. Thx man! 🙂

Thinking of doing very similar to our newly purchased Deadbolt. They are a decent rig outta the box needing just a nudge of upgrades to be capable I see. If I widen its stance it will no longer climb into my sons WWE Slambulance. So I plan a slightly different approach on improvements however better motor, more weight lower should definitely help. Great video, love the big American Flag too! Thanks

So cool!! 😎👍

boy that stock footage was difficult to watch LOL had me thinking it was an episode of matts offroad recovery after somebody drove a stock jeep into moab 😅 love this series, i think we can all relate to these cheap builds even though they all spiral out of control, very logical but wise selection of parts

@CapeCrawlers

Жыл бұрын

The stock runs were brutal! Had me rethinking the entire thing 🤣 but what a turnaround in the end!

Great build, a couple of things I might do different would be go for the 66T Injora over the Torque Beast, it just did not look that smooth and you would have still stayed within budget. Second, considering the weight of the build I think I would have trimmed the foams more or maybe run no foams, there was very little flex in the tires in the video. However I do not have any experience yet with the Injora S5 compound (have some All Terrains coming for my AX), so it might not be viable to run no foams. Other than that awesome job once again!

@CapeCrawlers

Жыл бұрын

Good feedback! I do like that 66t motor. I think these tires would be too floppy with no foams. They're VERY soft. Trimming the CI foams could be a good way to further improve the performance of them though

Very satisfying 😃

Fun video... great to see the two opposite ends of the spectrum put next to each other. I think to do it a little differently i would have not bothered with new foams and kept the stronger servo instead

@CapeCrawlers

Жыл бұрын

Good suggestion. Had I known the stock foams from Injora were so soft I would have likely done the same.

The stock shock pack from Axial comes with fine thread ball studs you should be able to use with the brass knuckles. I’m pretty sure the stock linkage uses coarse threads into plastic.

@CapeCrawlers

Жыл бұрын

I’ll check that out!

You’re officially the Scx24 Dad!!! Another awesome video Adam!! 💪🏼 💪🏼

@CapeCrawlers

Жыл бұрын

🤣 thanks for watching!

I got into these little cars more for the tinkering and modding than the running LOL Age and budget no longer allows restoring full sized cars and I can do these at the kitchen table in the evenings. Also easier (and cheaper to buy) to run at home or indoors than the 1/10 scale cars.

Got a Gladiator for my child. RTR is $150. For another 160 to 200, you can literally option out the whole thing! So, about 300-330, you're set for life. Great rig for ALL ages! So capable and fun. Unlike other fast rtrs, kids can give it full throttle without ramming it through a kitchen wall...hehe. 😊

Hello, Great and excellent work, I really like the aesthetics and benefits that you have achieved, it is fantastic. Even if he had gone over budget, I would have modified his shocks like the monster Gladietor, which I wish I knew how to do. Let's see if one day you show in a step-by-step video the modification of those shock absorbers. Thank you very much and a hug from Spain, Valencia.

@CapeCrawlers

Жыл бұрын

Thanks for watching! Check out this video on my shock setups: kzread.info/dash/bejne/p3l5rNSMo9qwYJs.html

@gfabian2

Жыл бұрын

@@CapeCrawlers Thanks a lot😊

I would recommend taking the front bumper off it gives it a way better approach angle. I also recommend what I did and buying a cheap chassis of amazon that angles the skid and makes it so much better on not getting high centered.

@parkergabrielson9602

Жыл бұрын

also prob trim the fenders.

@CapeCrawlers

Жыл бұрын

Very good suggestions. I’m going to make this into a scale replica of my 1:1 which is why I didn’t chop it up too bad. But you’re absolutely right

@parkergabrielson9602

Жыл бұрын

@@CapeCrawlers that would be pretty cool having a replica of your actual jeep.👍

Great video and approache 🎉

@CapeCrawlers

Жыл бұрын

Thanks for watching!

The screws from the injora screw kit (or any screw kit I would assume) will fit with no problem on brass knuckles, I just used those little brass pieces that come with aftermarket shocks and it worked perfectly

@CapeCrawlers

Жыл бұрын

I should have done that! The little screw snapped before I could even think about alternatives.

Cool build, Adam

@CapeCrawlers

Жыл бұрын

Thank you!

Great video, I bust got my first scx24 so this was perfect

@CapeCrawlers

Жыл бұрын

Glad it was helpful!

Crazy running a stock rig on a track after you've gotten use to running upgraded ones on lol. It's a nice change of pace not looking for the most insane line you can find

@CapeCrawlers

Жыл бұрын

It really transforms the course. So challenging!

ive been wanting to buy one and now im motivted

Yes I love this video 👍

Great budget build Adam! Many will benefit from the Performance to Dollar ratio you settled on. I don't know if it was already mentioned but take that extra few dollars and buy a good hex tool instead of the L shaped one that comes with the truck!

@CapeCrawlers

Жыл бұрын

Thanks for watching! Yes, investing in tools with the extra cash is a great idea.

Nice video!

@CapeCrawlers

Жыл бұрын

Thanks for watching!

great build, just got a c10, planning a similar approach to my build

@CapeCrawlers

11 ай бұрын

Thanks for watching! Have fun!

You should do a video on your course.... that's super cool

@CapeCrawlers

Жыл бұрын

Check this out: kzread.info/dash/bejne/e2ypy8aPiMeym8o.html

For the injora foams maybe you could try make 4-8 evenly spaced half cuts along the outer diameter of the foam. Should let it squish a little better. It’s what I did, Although they probably changed their foams for the s5 compound tires. And for those last $4 it’s a bit high up but you could find something with weight to stick in the front bumper. Another free mod is de-casing the esc. Makes it slightly smaller and lighter, and works great as long as your scx doesn’t go for a swim.

@maxwell5428

Жыл бұрын

Also I think those specific knuckles are notorious for breaking screws.

@CapeCrawlers

Жыл бұрын

I was pretty impressed with the injora foam. Had I know they were that soft I probably wouldn't have ordered the CI foams and done something like what you suggest. I am going to look into decasing the esc! If anything it will help the body close better. That's one drawback of the LCG chassis is that the esc puts upward pressure on the body and that velcro starts to fail.

@maxwell5428

Жыл бұрын

@@CapeCrawlers for decasing you just cut or peel the stickers on the sides. Then carefully pull the clips apart. I was rough with mine and snapped the little tabs, but nothing some tape can’t fix if I decide to put it back in the case.

My first go to mods are wheels and tires motor and servo and them I go from there

@CapeCrawlers

Жыл бұрын

Great strategy

Yeah one more time that was awesome

Awesome build would you be able to share the build for the other crawler. I would love to build it the same way (Parts etc)

I just picked up one of these and this video is soooo helpful! How are you recording video of driving the truck without a camera person(presumably)? I’m sure you have a camera mounted to your transmitter but I would love to know some details! You inspire us all!

@CapeCrawlers

5 ай бұрын

Glad it helped! I drive one handed and film with the other. It's challenging but I make it work!

Great video and nice parts 👍🤩 Greetz Andy 🇩🇪

@CapeCrawlers

Жыл бұрын

Thank you 👍

thx for this vidoe realy helpfull

@CapeCrawlers

Жыл бұрын

Glad to hear that!

Since there's no correction in the video, nor any corrections on the video description, or in the comments, the Injora wheels you want, if you are going to "flip" them for a deeper dish look, are the ones linked in the video description and not the ones he shows at 11:47 minutes. The ones shown in the video are the deep dish variants, where the spokes sit about halfway into the rim. If you try to "flip" those, you won't be getting a deeper look because the spokes are sitting halfway into the rim... so no deep deep dish look and no widened stance. In the "regular" stamped steel Injoras, the correct ones, the spokes sit almost at the opening of the rim. These you can "flip" and get the look you see in the finished build. Just a heads up before anyone goes spending money on the wrong item.

I had the same screw problem with the knuckles..... i popped out the screw and used the one from the stock shocks

Tip: same thing happens to me so what you gotta do with the links is screw in a bolt on the other side and it comes out

@CapeCrawlers

Жыл бұрын

I should have tried that!

ive got the 58m rock terrains on my bronco trx4m for a more scale loo. they are really good.

@CapeCrawlers

Жыл бұрын

I’m really impressed with the tires. So soft and grippy!

To add twist to your rope bridges go to local auto parts store get a box of bulk 3/16 brake line and thread your logs onto brake line instead of rope and u can twist it so not just flat

Man the before and after is crazy Anyone can tell you this but seeing is believing

Are you going to get a pillow for the budget build. I think it's great what you were able to do with the new performance of your gladiator I'm just kidding you about about the pillow. I have a deadbolt is stock maybe I can learn from what you have done with yours . I have been driving around my living room. I'll keep watching for more ideas. Thank you for the video I enjoyed it.

@CapeCrawlers

11 ай бұрын

Thanks for watching!

Great concept for a video (and well done as usual.) You still liking that motor? I stuck one in my warthog and can’t wait to swap it out. Too jumpy for me.

@CapeCrawlers

Жыл бұрын

Thank you! I like it so far. It's got a very narrow powerband I feel and I've always struggled with what build to best utilize the motor in. It seems to work pretty well in the gladiator for now, but we'll see what happens longer term.

*Nice job dude 👍🛻🪨

@CapeCrawlers

Жыл бұрын

Thanks for watching!

Any chance we can get an updated vid on how to actually assemble the shock extenders from grizzly ?

Are all these upgrades compatible with the scx24 jlu as well ? Thanks for your videos.

Watching that heavily modified keep get through everything so easily and slowly was so awesome. Really makes me want to get into rock crawling

@CapeCrawlers

Жыл бұрын

I find crawling so therapeutic. It's great for relaxing the mind!

The waiting patiently is the torture lol 😂

@CapeCrawlers

Жыл бұрын

Totally agree

After upgrade, soft N strong Toq👍✅💪😊🇲🇾

Dude, I'm almost done with my Gladiator, I have an NSDRC steering servo coming, hopefully. 🙏🏻 I wanna get the Club 5 Racing rock sliders for the Gladiator & Treal diff covers then I'll probably call it good! I'll have to post a pic of it to you, when I'm done with mine. 😉

@CapeCrawlers

Жыл бұрын

I definitely want to see it!

@RCCrawlerz209

Жыл бұрын

@@CapeCrawlers No doubt! 😉

Just came home with tan gladiator donor truck for a new build lol and I find this on my phone nice 👍

@CapeCrawlers

Жыл бұрын

Perfect timing!

@rcjoe406

Жыл бұрын

@@CapeCrawlers 👌

@cape crawlers, have you done a video on proper way to fill new shocks, as well options beyond just oil? If not that’s a video I’d love to see.

@CapeCrawlers

Ай бұрын

I have not. But I am just now getting to the place where I feel confident giving advice, so maybe I'll do that soon

@pwids3

Ай бұрын

⁠well keep it up, i just got into these damned things a few weeks ago and have tried to follow your builds. Best channel I’ve found. Thank you.