If you Enjoyed this hydro install check out this one here: kzread.info/dash/bejne/iGxmtbiehruxk6Q.html

@BenCos2018

Жыл бұрын

put a box over those wire nuts by the turbine box btw those wire nuts really shouldn't be exposed like that

@LandtoHouse

Жыл бұрын

Should be a simple enough fix.

@skeletorrocks2452

Жыл бұрын

I enjoyed your video. I have no system set up and my power bill last summer was $21 per month. $8 of that was the account fee. So 13$ 🤔 I was a little surprised at how little power was produced by your hydro system. 🤷 Although that is quite the impressive solar array you have there. 👍 Anyhow you have a good day and Live long and prosper 🖖

@timothyjohnson1511

Жыл бұрын

Decentralized, home-scale *nuclear fusion* technology confirmed by the Stanford Research Institute to produce commercially significant net positive energy with license to manufacture available today from *Brillouin Energy* .

@miloddvoranak8900

Жыл бұрын

Would be possible for you to improve turbine-box to prevent intake of outside air even when lid is closed ?

Pro tip: do not just discard the material that ends up at the bottom of your wooden box without first panning it to check for gold content. Just put a removable plastic box at the bottom of what you already have and then lift it out, dump it in a tailings bag and when you have collected enough, go pan it out. Who knows, your stream might run past a gold bearing source that wears down into the water over time.

@keithking1985

Жыл бұрын

Not a bad idea 💡 👍👌

@SLYdevil

Жыл бұрын

He should set up a box for that with carpet/ripples, plus this looks like N. Cack-a-lacka.

@Escape.Idiocracy

Жыл бұрын

This would likely have a higher ROI than the power….

@tuckertucker1

Жыл бұрын

@@Escape.Idiocracy I thought the same thing. Next video... "How I ditched my Awesome Mountain Hydroelectric Power and installed a self-panning gold farm!"

@tayandylor4421

Жыл бұрын

completely agree. seems like the ideal place for that to be a good source for finding gold

By replacing the reservoir at the top with something way bigger (aka a pond), you may modulate the flow of water depending of the need of the battery charger. To say it another way, instead of storing energy into the battery, witch is costly, better to store it by retaining the water on top. Regulation of the produced power can be done by automation of your 4 valves inside the PVC box, using servo motors,.

@tristanbrandt3886

Жыл бұрын

There's a vein of awareness for the environment the entire video. A pond would change the local ecosystem a lot more than a drum. Perhaps this was his goal?

@gjscomputerstuff

Жыл бұрын

Battery can respond much faster than the pond to drops in power. Like an Uninterruptable power supply for your computer. But you could have an electrical feedback system going back to your 'pond' to engage (or kill) the flow of water to your hydro generator when the battery drops too much . Personally, I like the idea of a man made pond, but at the source point, not part way down.

@HansKeesom

Жыл бұрын

@@gjscomputerstuff Yes battery's are faster and they also form a kind of pond, a pond of electrical energy. But batteries are expensive and a pond might cost less per kWh once that potential energy is converted into electrical. Would be like a generator you run when the solarpanels are not charging the batteries enough.

@wazza33racer

Жыл бұрын

building a storage pond is something of a major undertaking........and they silt up.

@HansKeesom

Жыл бұрын

@@wazza33racer That is absolutely true. So in the end it is a choice that each has to make for one self. Likely if there is a pond, use it, but if not, just buy more batteries :-)

A small tip : if your area doesn't freeze in winter, please plant some mint around the turbine. Rats won't go near the mint. They hate that smell. Also mint is more like a wild plant so no maintenance needed and you can plant the store bought ones and they will grow from stems.

In the late 1960's I lived off the grid in British Columbia with a small diesel installed by a retired American engineer. He had a beautiful small hydro plant that produced about 5 kW. He used the electric power to provide heat and power to both his home and his well-equipped machine shop. He placed pipe for the system's two heat pumps in a lower pond he had made in close to his home. While I was envious of his system we never spent more than about $300.per year on our diesel. Every two weeks we shut it down for an oil change.

@760sky9

Жыл бұрын

Not a bad idea using both systems.

For someone who is not an electrician you've done a pretty darn good job. Im not only talking about the electrical workmanship, but, putting up the whole install. Its the whole bells and whistles from source, electrical generation (Solar,Hydro,Grid) down to distribution. Its practically a mini power Plant.. Salute to you sir. Coming from an electrical engineer.

@jeffcossaboon5012

Жыл бұрын

Question: he said he is only running a #10 250ft. Is he not getting voltage drop? Should it not be #8?

@bobb.6393

Жыл бұрын

@@jeffcossaboon5012 more the merrier

@aaronadams01

Жыл бұрын

@@jeffcossaboon5012 It would depend on the tolerance requirements, which typically would be +/-3%. It also depends on how much current you want available. As you draw more current, the voltage will drop proportionally, which could be managed by increasing the size of the wire.

@newsnowadirondacksredux360

Жыл бұрын

Agree, from a Structural Engineer.

@AKshootingARs

Жыл бұрын

@joeabad5908 I am very interested in learning electrical engineering. My degree is in Political science, so I have no electrical engineering experience, nor do I know anyone (still alive) who does who could advise me. I have learned basic electrical skills, like adding circuits in my home for lights, outlets, a new oven, etc. around my home, but that’s it so far. Are there any books that u would recommend where I should start learning? My interest is personal, not professional- I want to learn for my own sake. I am especially interested for the purpose of eventually building my own home and living “off the grid”. I’d truly appreciate any recommendations or advice you r willing to share! Thank you!

I like it. Very well thought out and it's nice that some of these companies actually reached out and were willing to work with you.

When I follow this video and this series, I remember all the steps and the beautiful history of following the series years ago until now

@LandtoHouse

Жыл бұрын

Thank you for watching. This project did have lots of steps to complete!

Love your set up, I can definitely tell that you have put a lot of thought into it and I admire that it has very little impact on the surrounding environment. Definitely something to brag about even though it may need a little bit of touching up, it’s still working and that’s great, thanks so much for posting!!!!

1:34 😯 You should sift and pan the silt, sediment and rocks from that box. Never know what kind of interesting things might turn up! 🙂 Great setup and thanks for the in depth walk through of your system.👍

To me, the problem was not so much the wire mess than the exposed connections. Just because it's in the basement doesn't mean something isn't going to end on those contacts. You even had the experience of the mouse ! Also, i hope those exposed wirenuts are supposed to be in that tee box, otherwise they might corrode away, especially if always under tension. Also, an idea to prevent problems with expansions/contractions would be to have a sloped loop held on a platform of some kind that would allow for expansion/contraction movement while still plugged in. Great video, all in one !

@LandtoHouse

Жыл бұрын

There are still a few exposed connections that need work. The rectifier for example.

@ottodidakt3069

Жыл бұрын

in winter it would help to let the water circulate in the pipes even if you're not using the turbine, flowing water does not freeze ! i've never encountered such an amount of expansion/contraction yet i've done installs in high altitude cold climates

@RobertQuattlebaum

Жыл бұрын

I would also consider mounting that rectifier to a proper heat sink if you haven't already

Have really enjoyed the journey along with you on KZread! It has really been a learning experience. Great work Seth!

@LandtoHouse

Жыл бұрын

Thank you. It has been great learning from your solar install. Hydro is a lot more work.

@maximumless

9 ай бұрын

Quite useful information in case of a nuclear war with Russia or China :)

Wonderful trip down memory lane, I watched each of the videos as they were released! You've come a long way with this!

@TimPerfetto

Жыл бұрын

OHHHHHHHHHHHHHHHH emory shame you love hair and eat it

Great job man - very impressed by your industriousness!

I like your idea of building the separate electrical shed to reduce the chance of starting a fire in the house. Great video.

I just came across this via the KZread algorithm. I'm building an offgrid home and now I have another option after seeing this. Thank you so much for doing this!

Hi Seth, Great video on your journey. Happy to see the channel growth. You are looking well and still standing tall after all life's tribulations. Give the kids a hug and keep on keeping on brother. 😎

A wonderfully detailed and very interesting walkthrough of your hydro system!! 👏 🏆

@LandtoHouse

Жыл бұрын

Thanks! I tried to get a friend of mine to make this video but he was busy. He makes professional quality videos for businesses around town.

A really thorough review of your system. Easy to follow with great detail. Much enjoyed! Thanks.

Thanks for the video. Used to watch all the time and then some priorities and interest changed. Glad I came back to see this recap. I still want land with running water to deploy micro-hydro.

Thanks, very helpful. I’m in Florida so hurricane outages require Supplemental power. Your descriptions are very educational.

As a electrician I can say I'm impressed! Nice job!

@LandtoHouse

Жыл бұрын

It was a long road to get here. A new video is coming up with a whole house inverter and battery. Wiring was even cleaner.

I really enjoy your videos on your micro hydro. I think you have a lot more to optimize. However, most of them are more nice to have than need to have, since the win per option is very low. E.g. you could optimize the laminar flow into the turbine or you could make a more complex regulation of your water usage. The last will be saving water at the top and you could build in a container for storage. Also you could turn the water off when not needed. I have more ideas, just from watching your videos... Keep them coming, plz :D

There's a guy in New Zealand that uses a an old washing machine and has power with it for close to 20 years by now. One of his videos is called 16 years of free power. This is another great video. Must show it to my brother. 👍🇮🇪🙏🏼

Nice setup. Well made video, very informative and well explained. I've never worked with hydro power, and it was interesting to see it installed and functional. I've installed solar power systems, not my own yet but plan on doing so. As I live in SW Florida the solar would be more than enough thankfully, as there are no creeks near me. Or mountains. I will also compliment you on your "powerhouse" build, it's not bad and actually looks pretty clean for an amateur install. I am an Electrician with 35 years in the trade, and would offer a couple suggestions though, fairly simple ones that would be well worth doing. One would be to cover all exposed terminal connections. As you've already experienced, mice will get into things and love chewing on wires. I've been told that the current flow attracts them, whether from the magnetic field or because they like the taste of insulation, I don't know. For a while companies were using a vegetable oil based plastic as wire skin and there were multiple fires caused by rodents eating through the insulation. I don't believe that's used anymore, but they still chew through wires regularly. Placing traps would be a good idea. The bare terminal connections are an issue with rodents as they produce heat and they will build nests close to them. If they complete a circuit or ground out your system you'll have an issue. Second suggestion would be placing "Caution- Live Electrical Equipment" signs on your shed. From a liability standpoint it will offer protection to anyone who could possibly enter there, but more importantly it will protect you from any legal issues if someone were to get hurt. I know it's stupid, however there are plenty of stupid people in the world today. Even if someone were to go in your shed, on your property, to attempt to steal your batteries or inverter, if they were injured they could attempt to sue you. And possibly even win. It's ridiculous, but it has happened. Here in Florida there were at least 2 cases that I know of where some crackhead went into a Florida Power and Light switching station to steal copper wire. While it was energized. Did not end well for them as they were killed, however their families sued. And were given money. I'm not sure if it was a judgement to pay them or if the company settled out of court to avoid bad publicity, but the bottom line is that the placement of Caution signs was increased, as well as the number of signs required for any areas that contain energized equipment. Better safe than sorry. Good luck on your planned upgrades, I'll look for the videos.

Have you considered a float switch in the barrel and PID controller to adjust dynamically the turbine valves? It's a fair bit more complexity but it would allow you to get the most power out of your system without losing it to the overflow

@coxyofnewp

Жыл бұрын

I thought the exact same thing.. It make it run and generate more power, when there's a higher water flow all automatically..

@fnordist

25 күн бұрын

In a manner similar to a toilet flush controlled by a float mechanism, one can regulate the flow: when the float is at its highest point, it fully opens a valve; as the water level decreases in the tank, it closes, and adjustment can be made using threaded rods. No need for electrickery.

Love the look of your system. Very clean layout.

Love to see what you are doing here, Seth!

Normally on those barbed couplings it is recommended to double-clamp. Offset the clamp heads. Doing this can handle a lot of pressure and mechanical stress. The plastic coupling or the pipe itself will then be the weak point.

@Wutzmename

Жыл бұрын

Thanks because we're all dummies 😆

@LandtoHouse

Жыл бұрын

Adding the set of fence post along side the pipe in conjunction with clamps on the barb seems to have done the job.

@LandtoHouse

Жыл бұрын

I relate to being a dummy in many aspects of life.

@southboundsuarez9832

Жыл бұрын

how about butt fusion instead?

@southboundsuarez9832

Жыл бұрын

buttfusion

Thank you for putting this together, both the system and the detailed video, so important to explain the "why" and lessoned learned. Two questions: given your experience with mice and the other woodland creatures that will admire your green-energy why did you not further protect the vulnerable wiring and I absolutely hate with a vengeance the use of "Wire-nuts" to connect your generator with the to-house wiring connection, terrible. Thank you in any case. 👍 (Edit: The outdoor electrical box, this is a better idea. However for fire safety - it's a bit close to your house, fire spreads with ease. It would be wise to install an "Automatic Fire Suppression System" with a primed burn-through-pipe running above each electronic system within that cupboard. There are many to choose from online, personally I would use TWO medium priced independent systems covering the same area, as this allows for one to fail while still protecting your property. Also install smoke detectors etc.)

The wires seem to be just fine ,as long as you know what for with them then nothing else matters . You are a good provider for yourself n family so think good of yourself with this electrical system. The power co. would have a conniption fit if every one did this and maybe we should .. A smart tenacious man you are. GREAT VIDEO.

Awesome video, very informative, I watched the 500 watt hydro video before this one and that was great as well. Thanks for sharing your knowledge and not just your success but the failures along the way.

It has been great to see how your system has evolved over time. Is it possible to upgrade somehow for winter operation as well? !:- )

This is a really nice set up. Really enjoyed watching the video and is very informative and well explained. I would love to do this myself if I had the opportunity to live near a running water source like you do. The nice thing about this is you can produce power 24/7 unlike Solar. I've been electrical contractor for over 35 years and have been living off grid for the past 30+ years. So I can really appreciate the work you put into your system. One thing I would suggest as I have also experienced in my own set up is that you need to upgrade with time. That being said I would suggest you using lithium batteries or something similar as opposed to lead acid. I understand that they are expensive but the cost is well worth. Plus you won't have to deal with all the maintenance like you have to do with Lead acid type batteries.. One other thing that I would suggest is to make sure your battery cables are sized according to your battery amperage and fused according to your amperage if you haven't done so already. This is one thing that is often overlooked. Looking forward to your next update. Keep up the great work and please stay safe.⚡👍

Man, like you just said the electronic box is not perfect, but in my opinion it is soooo clean and organized.

Lots of helpful nuggets in there - many thanks. 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇬🇧

With new server rack batteries and a few more solar panels I would think you would be able to build the capacity to be off grid completely, I guess it depends how many batteries you buy at $1,750 a pop. Even 4 of the 5.12 kWh would double your 8 AGM batteries now and last 15 plus years..

Very nice review of what you've accomplished so far, thank you. That wasn't a mouse that ruined the previous PMA, it was loose wiring shifting around allowing one of the coil wires to touch, abrade, and then arc to the impeller housing. That short but deep notch missing from the wire is a tell-tale of arc-ablation, rodent chews are long and shallow. It's actually a design issue for Langston to work on: tie down the coil leads to the stator core after winding the coils but before potting the stator, anchoring the pigtail leads to the housing so that movement of the pigtail doesn't impart any movement to the stator wiring, and an insulating layer between the stator wiring and the housing such as 3-5 layers of resin impregnated paper.

@anonymouslyominous3

Жыл бұрын

The mouse was lying there blackened at least thats what he implied

Very clear info of your system! Thanks for sharing!

Oh you're so lucky to be in an area with both solar and hydro available. I would give my left arm to be in a location like yours. Nice job on all the electronics, it looks great.

Wow! I have been following this build since the start; amazing progress and really cool to see the iterations and how you've applied all the lessons learned! Are you at the point of being able to financially justify the build? If you were to start building the system today with your current understanding, how would you start?

@LandtoHouse

Жыл бұрын

Because of youtube the build is 110% worth building. Non youtube I would have gone with lifepo4 batteries and there are other options than the midnite Classics for charge controller.

I love this project and am about to do basically the same setup. Any chance you could put together a schematic so I can have better guide to design my system? Also, which batteries are you planning to upgrade to? Keep up the great work :)

@Rangband1

Жыл бұрын

I have a similar setup but I’m using a Harris Pelton from Kansas Wind Power and with one 5/16” nozzle at 58psi I’m getting 350watts. I would get a bit more if I replaced the bronze pelton wheel that’s been running continuously since 2008. The cups are worn smooth so some efficiency is lost. They have a new model with stainless pelton wheel that I would get if I was starting over. The unit in this video seems to be a bit missing some efficiency.

@TimPerfetto

Жыл бұрын

@@Rangband1 How dare you ruin the stream! I am your neighbor and you suck and have ruined my life

@sadiecovelodge

9 ай бұрын

Where can I purchase these stainless pelton wheels? I’ve been running my wilderness Alaskan pelton wheel since 1981 and it would not surprise me to discover that the 3 bronze wheels are becoming worn. Thanks!

Great video, Seth. Well done on the system, too.

Brilliantly done! I love projects like this….😊

It's always better to place a rectifier as close as possible to the generator as dc has less parasitic losses, specially with higher frequencies. Also you might want to look into active rectifier to improve efficiency

@theon2k

7 ай бұрын

and only 2 wires will be needed :)

Hey, I've been watching your microhydro vids the last few days, very informative and interesting.! 2 questions. How cold does it have to be before the system freezes up? With running water, that might get it through a frost I presume? Also, I wonder if it would be possible/useful to ad a flywheel to the generator somehow, to store the kinetic energy produced? Has spwncer ever tried it? Hope you see this, thanks again

@LandtoHouse

Жыл бұрын

Thank you for watching. The system can handle a light frost but sometimes our winters drop down to the single digits. Definitely has problems at that point. I'm not sure about the flywheel. The constant water flow from the mountain seems to do just fine At maintaining the spin.

@chuckiedoyle

Жыл бұрын

Thanks for the reply.! Can't understand why this system hasn't taken off here in ireland with all the rain and hilly land and streams. Or the hydro pump for that matter.

Very well planned and concise on your explanation the whole setup. Well done and keep it up. 👋👋👍👍

Great work and effort put so far to Build a micro hydro power on KZread. Appreciate your work. Carry on good work.....

Question, wouldn’t your barrel for sediment and overflow act as a breaker box and neutralize the head pressure gained from above?

@LandtoHouse

Жыл бұрын

There is around a 2 foot loss from the intake and barrel. This means around 6w of loss. Not much worth fighting over. The silt catchment and air removal is much more important

@gordonlivey5401

Жыл бұрын

I agree,you are venting the head to the intake at the barrel. Plug the outlet pipe and seal the barrel very well, and you have the head right to the intake height. This will give more pressure at the turbine, so you can use a smaller nozzle, giving the same flow as before, but with a higher velocity, hence more power output.

@DiscoReaper

Жыл бұрын

Why not site the sediment barrel at the top collector location too and take advantage of the 6w bleed?

@LandtoHouse

Жыл бұрын

The air seporation and silt filter is worth the 6w loss to me.

I remember watching this a couple years ago!! Very interesting. Looking forward to watching this!

great job... I wish I could implement this on my own some day.

Nice setup, very nice. I think the design is excellent.

I've been thinking of what I could get from a system like you have. Thanks for the information. Now we just need to have a wind turbine for a competition. I suppose in winter you could capture more hydro to supplement the loss of solar. In winter my solar drops to one tenth on many cloudy days. 24 hours of a 400 watt hydro is a constant 10k a day.

that got complicated fast lol what a cool system you really got it worked out well . ill bet it was fun trying to get it dialed in and max the power out to .

Sweet set up! Having the inverter when the grid goes down to run from hydro.

@LandtoHouse

Жыл бұрын

The off grid with hydro and solar is a great thing to have when the grid goes down.

It's good that you also include previous years design iterations that had failed as well and for what reason for the lessons learned aspect. Economical and reliable and acceptable performance are the 3 requirements of succesful commercialization. This is like indirect solar power.

I built one in Arizona the best I've ever seen,, I got the idea from an old gold mine, Wish I was there to help you out it could run all Winter. With reasonable temperatures. Plus we have hot and cold running Is water in the house.

I love it! Now I just have to go find a waterfall somewhere.

Wow! We need that on Nature Island!

In Chino Valley Arizona I ran across some Springs that feather small pond. Put an 8-inch pipe on the other end, and reduces down slowly to an inch and a half. It was amazing till electricity we are running off of that. Plus it was drinkable water. It was like a small Paradise. On 89 hey I think going towards Prescott from Ash Fork Koma there's a road that goes off to the right to the Seneca Ranch. Some of the largest Chinese elm trees you ever seen in your entire life. Water from the Springs come out of this granite rocks right out of the small holes, it's incredible, ice cold.

I agree with Joe, the electrical engineer who gave you kudos on your installtion. I have worked in the electrical distribution industry. And I took note of the incident where a mouse are through one of the phase wire coming from the turbine. The mouse met its demise by providing a ground path for the compromised phase. A ground fault detector can be constructed from a small torodial transformer through which all three phase wires will run. Normally the net magnetic field will be zero and the transformer output will be zero. The loss of a phase will result in an output from the toroidal transformer. Some experimentation may be required.

very good presentation. you have a very good tone/pace/linguistic style. You would make one hell of a teacher, kids ed luv ya.

This was very informative. Thankyou.

Looks neat enough to me, and I've done a lot of wiring.

beautiful setup!

On gridlessness they showed a guy who was using a single turbine called stream engine. He dug a good sized holding pond that was lined with timbers and it was a really good system

Amazing stuff it's so nice to see nature's electric power going into homes etc....from me and Greta 🔋🔋🔋🔌🔌🔌🏞️☀️💵💵💵

WAO!! So cool your system dear friend. I love it for sure; you are so lucky to have that creek there at your property which gives you so much advantage and can help you in doing all the inventions you want to do. I'm so happy for you!! Me too, have a mini solar system here at home to help me when the power goes down and can't even have cold water on the refrigerator, but not any more. Because I built some just enough to get me by and have all my internet with the computer, lights, fans refrigerator and small appliances to make my life a little better. My friend is already asking how I did it! Hahahahahaha!!! I feel a lot happier now with that little help!! You take care, friend! Have a good day!

Seeing all that clean cold water is making me thirsty.

Great system I didn’t see any grounding I hope you have that shed protected

Thank you... Most appreciated.

Looks awesome. Thanks for sharing

Awesome Extensive Set UP. SETH , their are tasks that are for two hours , that may take me a week to complete . the hours you are involved with are worth the Time 👍 ..

That is a nice setup 👌

They do this in New Zealand for huts, lodges etc. We have rainforests here.

Well-done, Stefan, Channel Islands

Huge fan of you @Land to House!

@LandtoHouse

Жыл бұрын

Thank you!

Your setup is awesome! I live in flat desert outside Phoenix, AZ so I would never be able to have micro-hydro. It would really be neat though!

I immediately subscribed and liked the vid as you mention it was your dream, now it's your reality and my new dream setup 🤭 Good job, love the content 📨

@LandtoHouse

Жыл бұрын

Thank you. It was a dream for many years. So rewarding to get out and build it. I hope your dream comes to fruition soon. The next step for this build is a lifepo4 battery.

Just a thought the overflow on the header tank if you pipe it to the bottom of the tank inside the barrel say an inch from the bottom it will self clear the silt out of the barrel

Excellent build, you would definitely bennifit from some lithium batteries. You'll have to either get heated racks or build a little heater. I use a couple 150 watt dc heaters, been working good for now

Just a thought: two pieces of tubing welded not flying-v in front of the inlet (the tip of the v point up creek) but set above the flow of the creek should divert large debris/logs/rocks as a bumper and keep them away from the inlet. Put a flap over the top to protect thing from dropping onto the inlet from above

Would love to see you build the generator box & coanda box out of cement/bricks would be super durable & make for cool videos

VERY NICE INSTALLATION

This is awesome. Anyone owning property with access to a running stream potentially has the ability to generate free electricity.

It's been so good watching your channel grow. You have shown all your battles and problems with all of us. Personal and as a business point of view( channel). Best thing about it is you take your time to do projects, not everyone has bottomless pockets like most channels on YT which are out of most peoples budgets. wish you nothing for the best in the future.

Excellent video. Thank you.

You might try using a "slip-fix" repair coupling at the barrel in place of that PVC you put it in case you need to take it apart. - The slip-fix might allow for the expansion and contraction without pulling the pipe out of the barrel

Love your channel Brother. Keep It Up.

@LandtoHouse

Жыл бұрын

Thank you. I have some fun projects planned just need the time to implement.

Another KZreadr has a rotating cylinder water intake. Looks very effective and efficient

@LandtoHouse

Жыл бұрын

Yes I have seen that! Really cool. I want to replicate that.

@sadiecovelodge

9 ай бұрын

Can you enlighten me on what a “rotating cylinder water intake’ is? Currently I am using a Pelton wheel setup since 1981 but everything can always use improvement if it’s practical. Any advice definitely appreciated!

We used flex seal to make a custom box for a planter to seal the wooden box so it would hold water. Flex seal will do the trick too I think for sealing your box.

Great information thank you 😎👍

At my job they use a hot knife style system that melts the pipe and then its pushed together to weld the pipes together. may could make something similar using a torch and some clamps

Good day Sir, Yes it is a best backup for power although the ROI can be achieved in long term, the positive side are it's free energy and no pollution for the environment, very nice, more power Sir.

Thanks for the informative video. Two comments. -- First, you obviously don't have bears in your area. Decades ago I visited friends in the Salmon Mountains of northern California. They had a similar sort if black pipe for water from a spring to their home and then a small reservoir for the local small town usage (gardens and such). Theirs was buried, and it ran about three miles (if I recall) down the mountain from the spring, but bears still occasionally found it and pulled it up. Apparently they liked to play with it, and chewed up a section, requiring a repair piece to be spliced in. -- Second, you might want to look at the Gridlessness channel to see their microhydro install. I just looked at it again recently, and they seemed to have less or about the same pressure, but their output power (wattage) was higher, and it had been running for 15 years. Again, congratulations on all the work you put in on that system and sharing it with us. It gives any number of great "lessons learned" for would be hydroelectric builders.

Thanks for a great video ! I have counted this video as my full nature plan so I do not need to exercise anymore ! Just walking around looking at all the woods in your area has made me tired & thirsty ! Time for nice cold beer ! I will let one of my old ladies get it while I try to pull a couple of old potato chips from the cushions ............. Sorta think ; this is how it felt ; for Tarzan the ape man ? ? ................. Nick , NavyBlueSmoke , LST-1195

Thanks that has been very interesting, good luck

Always enjoyed watching your journey.. I still think you need to add some rockwool :) peace

A hybrid inverter would make this setup SO much simpler!

@LandtoHouse

Жыл бұрын

Stay tuned i have two installs of hybrid inverters in the works.

I don't know if anyone has mentioned it but you could also put a paddlewheel generator under the barrel overflow for extra charge.