Where is the water coming from? kzread.info/dash/bejne/rIR9x8VyhqbYf7w.html Watch the series from part 1.

@asadmb

Жыл бұрын

How much watt generate

@LandtoHouse

Жыл бұрын

Between 50w and 300w depending on the rainfall.

I am liking your build. I am planning the same size project here in Chile on our little homestead to supplement our 10KW off grid system. Love the good advice and sourcing. Jim in Chile

I am really enjoying this series Seth! Thank you so much for taking the time to share this project with everyone. I would like to make one small suggestion. You have a beautiful turbine. What a fine piece of machinery. But please, please, build it a housing worthy of its beauty. Maybe that is part of your plan, in which case, kindly disregard my suggestion. I think you should consider a concrete structure. I admit I do a lot of work in my shop with leftover lumber and such, so I am speaking to myself. But that is like a Lamborghini parked in a shed. Again, I am learning a lot. Thank you again. Close to the end, now. This is so impressive, even with on jet open.

@LandtoHouse

3 жыл бұрын

Sometimes I have these ideas in my head that look way better than when I finish them. This box is one of those. It woks really well but could use some improvements. And it does not look very good. I will have to revisit this box later. One nice thing is the foam. That has really reduced the sound.

Splendid! Looking forward to seeing the completed product hooked up and using the power.

When you said you should of used a more rigid metal. But the aluminum was what you had. I smiled thinking of all the projects I have done using just what I had. It’s a frontier mentality. This kind of thinking is invaluable on a homestead. I just built a 5000 watt solar generator with 1200 watts of solar panels. I wish I had a source of water to add a hydro turbine to the system. I’m building a wind turbine from salvaged components to power my shed and chicken coop also. Thanks for the great videos. Keep it up.

Very interesting series. I cannot wait to see the final outcome.

Fascinating, and yeah the pelton wheel is probably slowing down when the chamber becomes flooded and the wheel is completely immersed.

Hey Bud! I think a drain box underneath might be better especially when you use all 4 jets. All the splashing can cause a problem with the jets etc. I’m assuming your sending DC voltage to the house and if nobody has mentioned it yet you don’t have to take those losses. Rule of thumb is always make your long runs with AC voltage, the losses are very small. Even if you cheat and use the ground wire as the third phase it better than a DC voltage run. 12 gauge 3 conductor would work just fine for your situation then install the rectifier next to the controller. Voila!, no DC loss. If you watch Joe Malovich he used extension cord wire from the hydro to the rectifier in the house. It’s looking great so far, keep it up. Best of luck!

@LandtoHouse

3 жыл бұрын

That turbine box will likely need a nice overhaul at some point. It has been great to get get an initial test but it seems to have a few issues with passing the water. Will be great content for the future. The voltage test that I ran in this video was just to show that the turbine is working. I use 10/3 wire to the house and then rectifier. That video is next!

@billssolarpowerandgardenin1016

3 жыл бұрын

Land to House have you thought about building a concrete gutter? Just a large concrete box leading to a gutter to give it lots of breathing room. Nothing massive, just simple and sensible.

@davycoolboy4775

2 жыл бұрын

Do you need a specific amount of water to have a system like this? And what if i have a lil river being my house can i install it just like this one?

@corysamoila

2 жыл бұрын

can I ask you questions Bill?

@SmallSpoonBrigade

Жыл бұрын

@@davycoolboy4775 The amount you need depends on how high it's coming from. The higher the drop, the less water you need. Also, keep in mind that there are a lot of different turbine designs out there, what's good for low flow high drop won't necessarily be good for short drop high flow.

The box is acting like a speaker. If you mount it to a block of concrete or slab. Your foam is working well. You should run the AC to the house and put your rectifier close to the batteries. You'll have less voltage drop with the AC over the longer wire run than with DC on the long run, also you can use smaller wire with the AC.

@stuartpratt3662

3 жыл бұрын

I agree as ac is just like a tide where it pushes and pulls on a few electrons rather than trying to shove a bunch with pressure were the efficiency is less and while there is sag with wires it would be less prevalent with ac over dc

@anti-cmos1349

3 жыл бұрын

Actually HVDC has less losses than HVAC over distance, but I'm not sure he's dealing with what is to be considered HV or not. If not it doesn't really matter.

@TheRainHarvester

3 жыл бұрын

AC is only better because of the associated higher voltage. If the 3 to 2 wire converter is only diodes (no transformer), then the efficiency won't change by moving the converter closer/farther.

@gravelydon7072

3 жыл бұрын

@@anti-cmos1349 Nope, it isn't HVAC and if rectified, it would not be HVDC. Even playing with the Smartdrive motors you still aren't in HVAC ranges. HVAC is in the range of 1KV and higher in most of the world. In the US, we don't consider anything under 100KV to be HVAC when it comes to grid power. For DC it is 1.5KV or better to be considered HVDC in most of the world. The US has had DC Voltages in the 3000VDC range on catenary wires feeding our trains for decades so again, we have higher levels before considering it HVDC.

I have never been so excited to watch a series like yours. Thanks

@LandtoHouse

3 жыл бұрын

Thank you! That means a lot! There is an off grid system coming up next.

@himanshupatel5097

3 жыл бұрын

@@LandtoHouse can you share micro hydro turbine technical detail and you can share me micro hydro turbine product for my further endeavour

You have so many cool toys! Wish I could come over and try some of my ideas!

Just came across your video on this turbine setup. I'm pretty impressed with it. Going to go back and look at some of the other videos on your whole installation of this turn my system that you set up. Thank you for sharing. We hit the like button and we added you as well.

@LandtoHouse

Ай бұрын

Thank you for watching. There are several hydro install videos on the channel.

7:03 Lil beetle go: "Too much water here, gonna hide in that box now!"

I think you should put a wheel to the pump switch. This will make it easier for you while opening it. Well done, really good🌺🌸

My 15 year Harris Hydro experience has all been with just two nozzles, but they are 7/16" each in peak water times, when I produce 876 watts (33.7 amps @ 26 VDC). 147' of all, thru 3' line in 1/4 mile, it runs at about 60 PSI dynamic.

King starboard in black or white...we use it a lot in the boating industry...it comes in several thickness...great project!

That turbine looks pretty well - addressig the noise: your wooden box works like an amplifier, set the turbine on a piece of rubber (available in 60x60cm/2x2ft. to dampen washing machines and dryers) and put dampening foam all around the inside walls and roof. If you think about bolting it down to the box, again use rubber around the bolts to decouple them against structure-borne noise. Regards from Germany.

2” pipe @70psi. You are going to make everyone jealous.

Definitivamente é o projeto mais bacana, bonito e que velocidade obtida, incrível Parabéns pelo feito Amigo

Nice job looks great, my system is not to far from yours, i run three jets and found my 4" outlet just couldn't remove the amount of water from the box especially when free wheeling, a second 4" pipe was added and it now works well, i look forward to your next videos. Take care and have fun john

@brettschacher8644

2 жыл бұрын

I've been wondering about the differences in efficiency of Pelton vs Turgo wheels for this. It looks to me like the Pelton is affected by turbulence in the chamber where as Turgo is less. I think a Turgo would exhaust better through the same pipe.

Great video. I love the sound when you slowly open the valve at the beginning of the video

As others have mentioned, it's best to run the three phase up to the house and install the rectifier there just ahead of your charge controller. AC at a higher frequency and higher voltage will suffer less loss over the resistance of the long wire run. Now, as to measurement.. The unloaded voltage is kind of useless data. Once it's under load, a measurement of voltage AND amperage downstream of the rectifier will allow you to calculate the actual working power it's producing in watts. Ohms law, Watts = amps times volts. Those measurements should be taken at the output of the charge controller when the batteries are low so it's dumping as much as possible into the batts. You could also measure between the rectifier and charge controller to get a sense of power loss through the charge controller. (it's circuitry will eat a small amount of power.) You'll probably want to mount that rectifier on a heat sink too. It's going to get warm once a load is drawing power.

@LandtoHouse

3 жыл бұрын

Yes Rectifier is on the other side of the wire run. The open circuit voltage is important when the charge controller can only handle 200v max. We got close but made it!

Gr8 project. For much better noise absorption use acoustic foam. I used it on my stand by generator

Subscribed way cool project, like that your trying to get the used water back to the creek

I'd love to see you use a ram pump to move some of the waste water back up into the intake. Would also be useful in more dry seasons too

@LandtoHouse

3 жыл бұрын

It would be interesting. The head pressure is 163 feet from the intake to the turbine over 1100 feet. Now the creek does have a spring just down from the intake that I could gain an extra 1gpm with ram pump.

@thomasperry7837

Жыл бұрын

Cam, I just so this video and I posted the same thought "waste water back up into intake. It makes sense and would make a self-sustaining system. You would have a system that only needs a specific amount of water that feeds back to the turbine. This Micro Hydro is a brilliant system and should be implemented in rural country AND cities. WE need to be self-sustaining people and not dependent. AWESOME!!!!

Well done, Might try a 4" 45° into a 4" Tee.. back of Tee reduced to 3" a 90° up & 90°, 90° (keeps debris out) for vent.. 4" side of Tee (front) is drain.. you can always make front foam a little taller to add more airflow if box is to airtight.. others have already mentioned a/c to house then d/c to batt, you can do that in 1/2-3/4" pvc & trace if burying.. Can't wait to see finished product and load test.. Be Safe

@robcorona8460

2 жыл бұрын

Discrà Dr cd do rn Xàrà tree ddaredrtree

@robcorona8460

2 жыл бұрын

Quarter

You can increase the wire size running from the generator to the point of use. That will eliminate a lot of the voltage drop over a long distance. You could also use a line reactor or buck boost transformer to cushion the voltage.

@cringuscristian8970

2 жыл бұрын

wrong answer.....the energy is better transported in AC , not in dc, so, better install 3 small wire cable to the house.....that is why smart people use 220v instead of 120v.....copper is very expensive.....

This is a commendable project.

Love this series. One suggestion: run your three phase to the house rather than the Rectified DC. There is so much loss with long runs of wire with DC. You could always add a three phase transformer prior to the rectifier to make up for the voltage loss at the house.

@jimginnyohio

3 жыл бұрын

Yes, definitely! Run the longest distance AC. Much less power loss in the cables!

@drradar

3 жыл бұрын

Not a bad idea, but some clarification: It's not AC vs. DC that matters, it's the voltage and current that matter. Large currents require very thick copper wires to maintain small losses. For a given power, if you step up the voltage, you lower the current, and that lowers the losses. AC historically was better for long runs because you could use transformers to easily step the voltage up (so current is low for transmission and down for usage. In comparison, it's generally harder to step DC voltage up and down. For example, there are 1 billion volt DC transmission lines in China! If Land to House could get ahold of two 3-phase power transformers, he could step the voltage up for transmission, and then back down for reception. However, this also assumes that the turbine is going to spin at a constant frequency. Power transformers generally can only operate well at a fixed frequency. I think Land to House is really doing the best they can here. Convert straight to DC and just eat the loss. They could go for a thicker wire, but that might cost too much to be worth it.

@Veritas-invenitur

3 жыл бұрын

Brett My understanding was that low and medium voltage DC has a much higher voltage drop per foot than AC. It’s only when you get to the high voltage DC that changes due to specialized math and physics I do not understand. As for the fixed frequency issue. I could be wrong but as the frequency and voltage of the generator are directly proportional shouldn’t the risk of core saturation be negligible? Mathematically speaking, based on my understanding, as long as both your step up and step down transformers maximum voltage and maximum frequency ratings do not exceed the transformers rating you should be fine.

@drradar

3 жыл бұрын

@@Veritas-invenitur Actually, it's the opposite: AC has higher losses per foot of wire due to eddy currents and the skin effect (and even radiation!). At low frequencies (like those used in power transmission or in this video), those effects are negligible, so for the same cable, at the same voltage and current, power transferred using AC or DC has identical losses. Power transformers have a design frequency. If you operate them at lower than design frequency, there won't be enough impedance on the input windings and you will draw too much current, heating up the windings (and destroy them depending on how far off design you go). If you operated at above the design frequency, the primary will have too much impedance and you won't be able to get as much power through the transformer (there's also eddy losses, skin losses, etc). Yes, if the frequency goes up with the voltage, core saturation in the transformer might not be an issue, but core saturation isn't the only problem as stated above.

@Veritas-invenitur

3 жыл бұрын

ashtonsethreimer I just finished my refresher research on the subject and I have come to 2 conclusions. #1 you are right about DC vs AC voltage drop, I forgot about power factor and cross sectional area coming into play. #2 I need to reread the text more often before I speak. Back to the frequency issue. Considering the frequency variations will always be on the high frequency side why wouldn’t a 50/60 hertz transformer work? If anything wouldn’t the higher frequency’s increase efficiency?

Foam isn't waterproof but it is plastic so recommended to cut by heat or where you can vacuum it up. Few egg crates in there would dampen the sound even more if needed. That vacuum effect can most likely be solved by an air vent through the blue foam. Just a thought :)

I love these kinds of equipment!

@LandtoHouse

3 жыл бұрын

Me too.

It's looking good and coming along

Awesome set up! More than anyone needs!

@LandtoHouse

3 жыл бұрын

Thanks for watching!

Thanks for uploading this video. In your next video could you please put load on it & see how it runs. Also show the intake of water into turbine.

Love this series, keep it up!

@LandtoHouse

3 жыл бұрын

Thank you for watching. Episodes 7 , 8, 9 and 10 are my favorite

You got the sound of the rain masking the sound of the turbo.

God bless these ppl who committed to protect mother nature ❤️🌱🌏🌎🌍

Something to consider is using a larger drain pipe, like 4 or 6 inches. The drain needs to flow and the pipe you are using is creating the issues you've described. If you still want you to use that same drain pipe you may want to consider adding a Y Pipe very close to the box then secure it to the box, 90 degree facing up, then add a 2 foot extension to vent the pipe; or however high you can get without interfering with the cover. Maybe even a Tee at the top just below the box cover to allow options for air to vent the pipe. You really don't need a bottom on the unit at all but it will keep animals from nesting there so that is something to consider. Might make sense that 2" feed and 2" exit will just work and most times you'd be right, but this item is different and does not align with the typical laws of Plumbing so one must be able to think outside the proverbial box for solutions. When you test ran the unit it did not vapor lock but as soon as you added the bottom you started having issues. Obviously I'm watching the video or in short on the outside of the fishbowl looking in while you are on the inside of the fishbowl, making said video, and may not see things as clearly as others might. I hope this helps you or perhaps another viewer... Cheers...

@SmallSpoonBrigade

Жыл бұрын

Yes, I'd probably go with a plastic catch basin and a somewhat larger outlet pipe than is going in. A clean out for the pipe is probably not a bad idea, although if it's running above ground like that, you could probably just disconnect the pipe if it needs to be cleaned out.

Would love to do a website with all these different products to help get the word out sis amazing stuff love it thank you for your videos

Great work!

*muito bom sua ideia , este vídeo veio parar aqui no Brasil*

Have read a lot of the comments but didn't notice if anyone had mentioned that maybe putting the wires from the turbine through some flexible tubing would keep the mice from chewing on them. The biggest problem will be how to attach it at the turbine housing. This would work even with your new and improved containment box.

That's delicious, am imagining how cool if you hook the rectifier to the charge controller to a battery, can't wait for the outcome man!

@LandtoHouse

3 жыл бұрын

The next two videos will give you the answer on that. it's pretty great.

to solve the problem with the water, open the bottom of the wood box the same size of the opening at the bottom of the turbine, then funnel it down to 3" using reduction couplings. this way you will be collecting all the water to the pipe and avoid any problem caused by the water in the box

@LandtoHouse

3 жыл бұрын

Good idea. I think that I am going to redesign with PVC trim boards. Make the bottom of the box 9" x 9" like you mention so that the water will drain without obstruction.

@Cam-gb1cu

3 жыл бұрын

pretty much exactly what I was thinking because if the water cant drain then you would also be losing power due to water remaining in the housing and slowing down the turbine

Very good. thank you so much fo sharing your idea.

That is a super cool unit. Not to be critical as an asshole but 15ft. from your creek will cause untold damage. I would think you might have figured that out by now since its 6 months later at this point. I have a pond with a 4 in. overflow pipe, no pressure at all, and it has put a 2 ft. hole in the creekbed it runs into. Water where water usually isn't can be devastating. Especially in forestland where things are much more fragile than they look. I hope it turned out ok. I wish I had one of those units. I would probably cut off a bucket and fit a 4 in. pipe to the bottom to drain and still drill a couple good sized holes toward the top in case of overflow, with a couple holes in the housing floor and screen on the bottom side to keep rodents out. Maybe a bit taller housing also.

Great work

man your channel makes me wish i had a creek, and a hill. I have so much going thru my head now and no way to test any ideas.

In most generation installations, have a larger generation room, which can be better to insulate and in your situation, the generator could overheat in its confinement, also a risk that the box could flood.

Really interesting video. Thanks I would have liked to have seen the bottom.

Está genial. Al pasar el agua por los inyectores el agua debe ser siempre limpia, se puede producir una obstrucción por suciedad o tiene filtros?

E Amigo, na gravação percebemos que o ruído do sistema é alto, e não sei se isso perturbaria o lugar aonde foi instalado, mas dá pra fazer um isolamento acústico de baixo custo com materiais certos para a frequência do ruído, abafando de forma quase inaldivel. Aí sim teria algo maravilhoso sem incomodar com o ruído que antes não existia

i find it very neat how great analogy water physics is to electrical physics. Valve just open a little, Water pressure high but water flow low = high voltage but low amperage and low effect/watt Valve open maximum, Water pressure drops a lot but maximum water flow = low voltage but maximum amperage and low effect/watt Valve open "just right", Water pressure drops just enough to provide optimal water flow = High voltage and high amperage and good effect/watt. Works exactly like an solar mppt controller. The controller adjust the voltage/amperage ratio for maximum efficiency from solarpanels

Great video! These things are really cool! I had the idea to put a water wheel in a river or creek, and hook that up with the right gearing to an electric motor for electricity. But this seems a lot simpler xD haha

It's nice and installation is not so difficult. Thank you!

Really like this series, this is so cool on my way to the Langston website.

@LandtoHouse

3 жыл бұрын

Thank you. I actually just got back from filming another type of turbine today. It is a low head pressure model from Langston.

Electronics and artwork are commonly shipped in Eggcrate Soundproofing Foam. Maybe you could call and ask for discards to reduce decibels. "Pinky filter pads" can double as water filtration and acoustic absorbent material. I also worry if the housing will stay cool enough. Is the water running through the pump cold enough to keep it from overheating when the housing is closed? I am really enjoying this series. -KJ

How did you fix the vacuum problem you said was happening when you installed the blue foam on the bottom?

keep em coming dude. nice

Oh my God, this is transcendently cool. Off grid power 💘 💕 ❤

@rodgerhatfield3068

2 жыл бұрын

Made with on grid products. Lol

And most people that have their turbine setups ventilated so it doesn't overheat. so so much for keeping an airtight and the bugs out.

@JoeMalovich

3 жыл бұрын

Mine is airtight but also buried with lots of volume in the pit.

I never intended to make my own diy power station thingie but i still watched the videos

@LandtoHouse

3 жыл бұрын

Thank you for watching! I hope it was worth the time ! :)

@benduffy4223

2 жыл бұрын

Yeah this is me. I'll never build a ram pump or generate off grid power or be self sufficient, but it's damn cool to see someone else do it

I think I would install a second turbine and Y or T them off so I would always have power going to the house and be able to do maintenance on a turbine. Build a block shed to hold it all and stay out of the weather and keep maintenance parts on hand.

Excelent hidroelectric. Tk man

I think that's not suction but your tailstock backing up filling the turbine space and the wheel is running in water. That's drag on your system. Pelton wheels are intended for a horizontal axis. A turgo wheel can run vertical or horizontal axis. Either wheel depends on the water escaping out the bottom and not interfering with the rotation. To get maximum power your wheel should run at half the velocity of the water. There should be a flange around the bottom of the housing that you can attach a flange to that extends below your box floor. That should keep the water out of your box. I'd suggest on open flume to move the water away. A pipe will fill up and back into the turbine.

Any concern for mold/mushrooms that may grow as a result of the damp and moist wood? Also, poking small wholes will keep snakes from finding a nice place to sleep. Just a thought and I could be wrong.

Good job

Good job 👏🏼

There are many things I would have done differently for sure (and have done differently with my turbine). Good to see it spinning though.

@LandtoHouse

3 жыл бұрын

I would love to hear those things. You have the experience and understanding!

@kipdennis3796

3 жыл бұрын

Hey Joe i know you'd go with a circular pipes to the valves say it man!

@JB-mf1zc

3 жыл бұрын

@@LandtoHouse I was thinking to cut a square hole in the bottom of the box just big enough to set the turbine in and build a tray larger than the square to catch the water but swedge it down to your 3"or4" what ever size your drain is. just a thought. Good video! Thanks for sharing! God Bless!

Sealing the edges of the shroud to the wooden box isn’t likely to help much no matter how well you seal it. The shroud needs to be able to drain fully as fast as the water is entering it or else it’s going to fill the area inside it with water and strangle the turbine and water jets. I suspect it would be better to cut a square hole in the bottom if the wooden box the same size as the metal shroud of the turbine, and let it drain into an open channel underneath instead of a pipe, or use a much bigger pipe. I make these suggestions as though I’m an expert, but I have no experience with these systems so feel free to correct me 🤷‍♀️

The Pelton wheel is known for being extremely efficient, but it rotates at high RPM. What types of bearings are used and how long are they warranted by Lancaster? If all.four nozzles are turned on, can you achieve 220 volts.AC then split it down to.110 vac.at the house? How many watts are you getting at 110 vac at the house?

I would put a tee under the box instead of a 90. And on the other side of the tee make it a vent line above the box so you don't have the suction

@fyremoon

3 жыл бұрын

I was just thinking that myself. It would prevent the turbine from slowing down and might prevent the water backing up into the box as well. It wouldn't hurt to install a drain in the box so any water that does escape can be drained away rather than filling the box. If something were to go wrong with the motor, then the box would fill quickly and possibly short the electrics.

@loughkb

3 жыл бұрын

It's not suction, it's back-pressure causing the problem. If water backs up into the housing of the turbine, surrounding the turbine, it will drag it down. Increase the down angle of the drain line so it doesn't fill up. Too shallow of an angle and gravity can't pull the water away fast enough causing the pipe to fill up. If you actually had a vacuum in the drain pipe, it would lower the atmospheric pressure in the turbine housing and increase the inlet flow, increasing the turbines output.

@chriswisselo4329

3 жыл бұрын

A Tee and a drain in the bottom of the box wouldn't hurt, just for good measure and only cost a few bucks. Kevin Loughin is right though, it's not a vacuum because that would suck more water through the input causing a spike. When he walked away from the housing after the foam was installed, it appeared to me the outlet pipe had a small upward curve, restricting the flow? Could be just the camera. I would also double up on the outlet pipe (2x 3" runs) so there will never be a capacity problem on the outflow.

I'm seeing a trend. People start researching this beast called "Hydro" and end up becoming rather obsessed with it. Is that about right, Seth?

@LandtoHouse

2 жыл бұрын

It worked that way for me haha. Micro hydro power has been a long time dream of mine. I also watched many KZread videos on the topic before giving it a try.

Pretty Cool

This is the sound of FREEDOM.

It's get in market place....nice

Para aumentar más la eficiencia, deberías de enviar la electricidad en alterna hasta la placa de diodos o rectificador dentro de la casas,

Wow, what a cool device I like it, more please, more content, I love your enthusiasm.

@LandtoHouse

3 жыл бұрын

Thank you. I have electronics coming up next!

Superb idea..can used in small town in africa ✌️✌️✌️

I like your commercial at the beginning of the video!

@LandtoHouse

3 жыл бұрын

The ad? I actually do not have control of the youtube ads.

@JB-mf1zc

3 жыл бұрын

@@LandtoHouse I see.

I didn’t read through all the comments, but you can run AC voltages up to 100 feet before any corrections in wire size for voltage drop. Cant you carry the current in AC to where you intend to charge a battery bank where it can be rectified to DC? Depending on the load current at the other end, you may need some heavy gauge expensive wire for a DC run that far. That’s a cool as heck system!

Good jobs

you could also put in a drain vent like in a house if you have vac issues still

I have a small stream running through my lower property about 80 feet away. There is a culvert pipe, about 30 inches that allows the water to travel underground for about 50 feet, and then there is a drop of about 15 feet. The stream runs all year. I’m guessing but I’d say it flows about 10 gallons a minute most of the time. In August and July, it may slow down to two or 3 gallons a minute, but I’ve been here 35 years and I’ve never seen it dry.. I am a retired electrician from the local electric company after 38 years. I am very curious about this system. I considered putting some solar panels on my roof, but my roof faces about 30° south east on one side and about 30°to the north east on the other side.. not only that, but I live in a valley with very high trees along the ridges. In the summer, the sun does not come up high enough to clear the trees until about 10 AM, and the sun goes behind the trees on the opposite ridge about 6 PM..so solar would not benefit me to the max... I did work in the field for a few years dealing with meters. I was often sent out to check out a meter that could possibly have not been registering. It turned out that the people had solar panels. When I was entering data into their record, I noticed that The electric company actually paid them over the last year. Two in particular, one had a swimming pool with a heater and a 3 ton air conditioning unit. I don’t know if their house was gas or electric heat but, over the year, we paid them $600 for the energy they put into the grid with their solar panels,And they pay nothing over that year to the electric company for power delivered to their home. They delivered more power to the electric grid than they consumed from the electric grid that year.Another house on the same street, same story, we paid them $50 over the previous year because they had been backfeeding excess generated power by their solar panels back into the grid..They both lived on the top of a hill with sun exposure most of the day. that stream running through my property runs 24/7 /365...tapping into the stream,That would be a more feasible system due to my shaded location.

Really nice system this is brilliant...you don't need to install ram pump if you could power a water pump using electricity generated by this generator..in fact its lot of power than ram pump

Electrical part should be separated from the hydraulic side. If a pipe leaks, a short circuit can occur and the generator would be defective. The electrical part should be at least IP 67. A short circuit could also injure people.

You could build a sender block house for your Micro Hydro and it would cut down on your noise significantly

A good demonstration. I have one question. Our households will require 220 -240 volts of power. This unit will produce less than that. How do we top up?

Drill a small hole at the top of the drain pipe and use a air line check valve to prevent vacume.

Very cool

sir iam watching your videos from India and you really did it..awsome🤭🤭🤭 can i insatall in my home

hello sir. im following the series and i am now on the 6th part. id like to ask how much does your turbine cost thank you

is the water from the jets filling up the box and thereby interfering with the flow of the pelton wheel?.

Wow I real like this set up this is best one I seen did you it running to your house . I with to see it all set up.

@LandtoHouse

3 жыл бұрын

Thank you! The unit ran well for a season. Now I am going to make some upgrades to the intake and housing. Those videos will come out in the spring. (when its not 25 degrees out)

Would be awesome to have a small yard barn/hut for that turbine to be inside. You and the turbine could be out of the elements :) Do you have enough flow to justify a 2nd turbine?

I liked it very much, very good device.

@LandtoHouse

3 жыл бұрын

Thank you. It works well!

Nice home for small critters. Heads up and watch out for mice. Your drain hole could be there way in especially if its warm in the box during winter. Love it though! I think we should access all the free energy we can for the world is a beautiful place. Let's make an even better place

@LandtoHouse

3 жыл бұрын

Haha that is exactly what happened. Mouse chewed a wire.... locked the pma down. The the water froze and busted all the pvc in the housing. Needless to say there is going to be a rebuild series.

@littlenugs9942

3 жыл бұрын

@@LandtoHouse aww dude I'm so sorry to hear that. I was only saying it because I'll go to pull your own parts for certain parts for cars and more times than not there will be a nest of some sort inside air vents ducks, and hoses you'll be surprised where they make a home. Anyways yes they chew the wires in the car. Why is that? Teeth sharpening? Maybe. Again I really like the idea and where it's going. Cement pad, cinder blocks, it's your project but wow ideas come flooding in. Great job and ty for doing your part in saving this planet I like to call home.

If you had a valute that kept the flow tight to the blades there would be more efficient flow without cavitation or vortex flow loss. Keep the turbine then at just below water level but the output at. The lowest point possible so the water causes as negative pressure pulling the turbine blades rather than flooding the unit. 3/4" pipe carries 7 1/2 pound of negative pressure per 10' of drop with a straight vertical drop. ( use as little elbows as possible, they have the effect of 25' of pipe in static pressure per 90°ell. A large pipe creates more negative pressure to drive but you cannot have a pipe larger than the input unless you set the input about 3' below the water line at the input. The vallute will keep the blades moving efficiently as long as you dont pull air and your piping isnt too large. (You can find hydronic equations online for pump sizing according to flow rate and backward figure your pipe size from what you already have purchased). Tell your turbine "expert he shoulda consulted a boilerman before designing that highly inefficient turbine box. Use common sense and exercise your research abilities online to find your best alternatives to problems rather than doing trial and error that cost bundles of bucks. As I said, you dont want pressure into the pump, but tighten the tolerances in the turbine and use the negative pressure to pull the turbine. That eliminates all the flooding problems and leaks. (Common sense).

would the water coming off the pump still be potable if it was coming from a spring? Or should this be a separate system?

You need to put a stack into the chamber the water drops into. This will get rid.of.the vacuum issue. Basic plumbing.