Avoid Costly Mistakes: LG Fridge Door Removal & Replacement Guide
In this video, we'll guide you through the lg refrigerator door removal process step by step. Whether you're working with a standard LG fridge or the LG Thin Q refrigerator model, we've got you covered. This tutorial also covers lg refrigerator door hinge replacement, ensuring your door operates smoothly after removal.
Once the door is off, you may need to deal with other components attached to it. That's where our additional guides on lg refrigerator display panel replacement and lg fridge water filter replacement come in handy. These processes are often part of the door removal procedure, and our instructions will make them easy to handle.
Of course, we also provide valuable tips for lg refrigerator door seal replacement to maintain your fridge's efficiency. And if you need to tackle the lg ice maker or lg refrigerator water inlet valve, we've included information on those replacements as well.
🛠️ Timestamps:
00:00 - Intro: Mastering LG Fridge Door Removal & Replacement
01:18 - Step 1: Accessing Hinges & Control Board by Removing Top Cover
02:57 - Step 2: Safely Disconnecting Water Lines from LG Fridge
03:52 - Step 3: Methodically Removing LG Icemaker Assembly
05:04 - Step 4: Detaching LG Water Filter and Inlet Valve Assembly
07:15 - Step 5: How to Remove Icemaker Door Cover
08:12 - Step 6: Removing Ice Maker's Air Flow Entry Door Gaskets
08:59 - Step 7: Taking Off LG Fridge Display Assembly
16:38 - Step 8: Dismantling Main Secondary Icemaker Control
17:10 - Step 9: Removing LG Door Hinge & Door Assembly
18:36 - Step 10: Installing & Setting Up New LG Fridge Door
21:32 - Step 11: Extracting Mullion Heater from Old Door
22:00 - Step 12: Transferring Door Gasket to New LG Door
23:51 - Step 13: Attaching Mullion Heater to New Door
25:03 - Step 14: Fitting Secondary Icemaker Control on New Door
26:58 - Step 15: Reinstalling Display Assembly on New LG Fridge Door
So, are you ready to start your DIY fridge repair? Let's jump into the video! Don't forget to like, share, and subscribe for more handy appliance repair guides. Thanks for watching!
Пікірлер: 7
This is great video. In my case the water line is good, and it can make ice. But water/ice dispenser is not working. How do I validate that replacing the door will work and wiring component outside the door is not a problem. Is there a way to test that?
Thank you for this video our display panel is unresponsive after I sprayed and cleaned in the ice dispenser hole I’m guessing I was to liberal with the spray and must have got some spray on the internal panel it self it still lights up but we can’t it to switch from crushed ice to water. This is just about the only video I could find that explains how to remove the panel I’ll give it a few days to dry out before ordering a replacement, but at least now I know how to remove and replace without breaking it. Thanks again
@onlineappliancetech
6 ай бұрын
Thank you for sharing your experience, and I'm glad you found the video helpful! It sounds like you've taken a wise approach by allowing the panel to dry out before deciding on a replacement. Sometimes, moisture can temporarily affect the functionality of electronic components, and a few days of drying can resolve the issue without the need for further action. If, after giving it adequate time to dry, you still face issues with the display panel being unresponsive, then replacing it as you've planned might be the best course of action. It's great to hear that the video has equipped you with the knowledge to remove and replace the panel without causing any damage. If you have any more questions or need further assistance as you proceed, feel free to ask. Best of luck with your repair, and thanks again for watching!
Do you have a video for the freezer door replacement?
Could you please provide the part number for the display housing! I can not locate it without the electronics
Thank you so much for this much needed helpful video!
@onlineappliancetech
8 ай бұрын
You are so welcome!