Most Audi and VW cars 4 years or older we see with the 2.0T and 3.0T engines have leaks in the brake vacuum pump. Here we explain how to identify the issue.
Жүктеу.....
Пікірлер: 11
@kelvinwilliams8476 ай бұрын
Any recommendations on where to purchase the seal kit from please. The make on my car is Pierburg model 06H 145 100 S.Thanks.
@carhavneurotech
6 ай бұрын
Hi Kelvin! Try Euro retailers like Europaparts, FCP Euro, or pelicanparts
@pastorfred3460 Жыл бұрын
does anyone know the proper torque specs for that vacuum pump, the 3 large bolts? Can't seem to find it online...one video the shop did 8 Nm on a 2016 Tiguan and another on a 2013 they did 20 Nm...?
@carhavneurotech
Жыл бұрын
Which year and model?
@pastorfred3460
Жыл бұрын
@@carhavneurotech mine is a 2013
@pastorfred3460
Жыл бұрын
Tiguan
@djkane4443 жыл бұрын
Is there a trick to re-installing the pump? I removed mine to replace seals and gaskets and now can’t re-install?
@BotMechanic
3 жыл бұрын
Same issue
@djkane444
3 жыл бұрын
@@BotMechanic you have to take the high pressure fuel pump off the vacuum pump. It puts force on the cam lobe which will not allow it to go on.
@BotMechanic
3 жыл бұрын
@@djkane444 you literally just saved my ass thank you so much. I was so confused as to why they were taking the HPFP off of it in other videos and they didnt care to explain. It just barely went straight on. Thanks so much!!!
Пікірлер: 11
Any recommendations on where to purchase the seal kit from please. The make on my car is Pierburg model 06H 145 100 S.Thanks.
@carhavneurotech
6 ай бұрын
Hi Kelvin! Try Euro retailers like Europaparts, FCP Euro, or pelicanparts
does anyone know the proper torque specs for that vacuum pump, the 3 large bolts? Can't seem to find it online...one video the shop did 8 Nm on a 2016 Tiguan and another on a 2013 they did 20 Nm...?
@carhavneurotech
Жыл бұрын
Which year and model?
@pastorfred3460
Жыл бұрын
@@carhavneurotech mine is a 2013
@pastorfred3460
Жыл бұрын
Tiguan
Is there a trick to re-installing the pump? I removed mine to replace seals and gaskets and now can’t re-install?
@BotMechanic
3 жыл бұрын
Same issue
@djkane444
3 жыл бұрын
@@BotMechanic you have to take the high pressure fuel pump off the vacuum pump. It puts force on the cam lobe which will not allow it to go on.
@BotMechanic
3 жыл бұрын
@@djkane444 you literally just saved my ass thank you so much. I was so confused as to why they were taking the HPFP off of it in other videos and they didnt care to explain. It just barely went straight on. Thanks so much!!!
@carhavneurotech
6 ай бұрын
Yes that's corect