Audi A4 B5 1.8T (AWT) Timing Belt & Water Pump Replacement
Автокөліктер мен көлік құралдары
Today I change the timing belt and water pump on my 2001 Audi A4 B5 with the 1.8T (AWT) engine. And as a bonus i will also do an engine flush at the end of the video.
This will probably be the last that you will see of this car on this channel. But If you want to follow some other stuff that I have going on (lawnmowers, all the daily cars, motorcycles, boats stuff e.t.c then please follow my other channel here: / @mekochmedia
-----------------------------------------------------------------------------------------------------------------------------------
Disclaimer:
Due to factors beyond the control of BackmansGarage, I cannot guarantee against improper use or unauthorized modifications of this information. BackmansGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BackmansGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BackmansGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackmansGarage.
Пікірлер: 19
Fasen va gott att jag hittade denna videon nu när jag själv snart ska ge mig på att dokumentera ett rembyte, fast på en B7 🙌 Snygg video!
Seriously thanks for this saves all of us from endless scrolling 👌
Your other YT channel looks most interesting Mattias, cheers.
@BackmansGarage
9 ай бұрын
Thanks :)
Good work as always. Just did an oil change on mine yesterday
@BackmansGarage
9 ай бұрын
Did you use a screwdriver for the filter?
@Stage_59
9 ай бұрын
@@BackmansGarage I thought i replied to you the same day, but i guess i didnt. Yes i did use a screwdriver for the filter. I've never seen any other filters utilize that before i got my B5 and bought stock filters.
Nice one.
For future reference if you still have the car, the water pumps on those are known for getting destroyed because of the plastic impeller I suggest getting a metal one for future
Never prefill a filter on the clean side. The new oil container has no guarantee of cleanliness and can have debree big enough to hurt main bearings. If you are paranoid about oil pressure during the few seconds of cranking it takes to fill the filter, filter your oil first.
@BackmansGarage
9 ай бұрын
I realise there are divided opinions about this method, so to each their own. I usually don't pre-fill oil filters, but on this one it was easy enough to try it. Cant say the oil pressure built up noticeable quicker than usual tho.
@walther89
7 ай бұрын
oil pressure issue is only when the engine was rebuilt, if you put or not oil in it dosent matter when engine had run
Snyggt 👌
I have to do this next week and am wondering if I should remove the radiator completely like you did here? Is the crank pulley difficult to remove?
@BackmansGarage
5 ай бұрын
Yes to the first question and No on the second one 🙂
Mycket skruvande för att byta kammremen, men nu kan du köra några år innan nästa byte 👍
@BackmansGarage
9 ай бұрын
Ja inte den smidigaste man bytt kanske, men det var överlag ganska trevligt ändå. Tog lång tid men det va ju gott om utrymme när man väl plockat bort allt :)
,,dont touch“ 😂😂😂😂😂
@BackmansGarage
4 ай бұрын
😅