Thanks for the video. Some kind of captions would be good at the various points just explaining what and why you’re cutting or removing those parts. I’m assuming all the functions, on/off and air (blow) directional controls still work perfectly?

@rusnacencoooo

4 жыл бұрын

Hello! Sorry that i haven’t explained all the details, it was a quick video. Everything works fine, but 8v vents are shorter than the original ones and you’ll have to make some extensions if you’re not happy with the current air quantity.

Was it just the outer rim of the dash and the rubber trim inside that needed removing? did you remove anything from the 8v vent other than the plastic rim?

@rusnacencoooo

4 жыл бұрын

hamzah amjad hello! Everything that i’ve cut and removed can be seen in the video. Haven’t removed anything else.

Подскажите,а на vw caddy подойдёт?

Is the cutting of all that duct trim absolutely required (not so much the rubber gasket, but the hard dashboard/duct trim)? I see you also completely cut off that outer retainer ring thingy from the 8V vent before you inserted it. Thank you for the video!

@rusnacencoooo

4 жыл бұрын

cdefreit1 hello mate! First of all , i don’t think there is any perfect way to do this. You can start by cutting the ring and those retaining tooths from the 8v vent and then try fitting it. I’ve tried to minimize the dash cutting as i’ve seen some dash deformation as i was fitting the vents. I can’t see any cutting marks with stock vents or 8v vents, so i thing it’s ok. Thank you too!

@cdefreit1

4 жыл бұрын

@@rusnacencoooo Got it! I'll let you know how it goes without cutting the dashboard duct, but it's good to know you don't see any cut marks when the 8V vent goes in. Thanks again, bud!

@rusnacencoooo

4 жыл бұрын

You’re welcome

@29metko

3 жыл бұрын

@@cdefreit1 did you fit them without dash cut?

Bye, congratulations!!! Could you please tell me if I can do it on mine as well? I have a tt mk2 year 2009, thanks for the reply, bye!

hallo Alex, brauch man für den umbau keine adapter? sind die plug and play? wäre dankbar für eine info, mfg

@rusnacencoooo

2 жыл бұрын

8v grilles are a little shorter than 8p and you can use an adaptor for 100% air flow. You can also use them as they are as you don’t lose that much air flow.

@enricodiessner9367

2 жыл бұрын

@@rusnacencoooo thank you

Hello, first of all, congratulations for the very detailed video 😊 I wanted to know the air vent you inserted, what Audi model is it? And what year is it? So I can find out how to buy it. Thanks so much

@rusnacencoooo

4 жыл бұрын

Tranks Maria. Vents are from audi a3 8v.

@mariadesanto823

4 жыл бұрын

@@rusnacencoooo Thank Alex 😉

@rataj7379

4 жыл бұрын

Tt

@personalcoachozturk1985

4 жыл бұрын

Alex R. Can i do the same for my 2006 model A3

Are the 8p and 8v the same length or is there any shortening of the 8v needed?

@rusnacencoooo

5 жыл бұрын

8v’s are shorter than the 8p’s, but it s not losing that much air in my opinion. You can make some kind of pipe if you really wanna.

@chodak01

3 жыл бұрын

the difference is considerable. All the air flies under the board and only a small part through the airflow. I recommend making sponge sleeves like I did in my s3 8p static.carthrottle.com/workspace/uploads/comments/fc3ed80c7ed3db11a65d645d860c3e71.jpg ibb.co/CsxFTSZ

Enlace de la rejilla nueva?

Si può fare su un audi tt sline del 2010?

Where to buy this vents?

@rusnacencoooo

4 жыл бұрын

PC-Builds you can try on eBay or local websites

Why?

un link ? :d

U mad