As GREAT as a modded Neo Geo gets
Ойындар
👕 Support the channel by buying one of my T-shirts, designed by me and made by American Apparel right here in the USA (ships worldwide)
www.BorderlineOCD.com
The joy of being an adult with a disposable income... buying the toys you only dreamed of when you were a young kid. I still remember going to the video game store to trade my Genesis games for a few dollars so I could save up for some new release, and staring at the massive Neo Geo games on the shelf next to the Sega games. I wanted them. They were bigger, much bigger. All the artwork was fighting games. What was this mysterious console?
I've come a long way and I'm enjoying my Neo Geo ownership 30 years later. So much so that I have surplus Neo Geos. What the heck? Well, this handsome puppy is going to a new home where I hope it will bring the same joy to it's new owner as it does to me.
Before we send it off though, things need to be done. Lots of things. All the things. The full treatment to prepare it for another 30 years of Metal Slug and King of Fighters.
🌍 Need a Neo Geo UniBios? Support the Neo Geo scene by buying one from the approved list of sellers on Razoola's website
unibios.free.fr/
🕹 Some of the best RGB SCART cables in the business from your boys at Insurrection Industries
insurrectionindustries.com/pr...
📖 Step-by-step guide that I followed in this video from @RetroRGB on performing the RGB Bypass and C-SYNC mods
www.retrorgb.com/aes-rgb-bypa...
🔌 Mouser parts (make sure you figure out whether you have a 5V or 9V unit first)
9V 3.5A power supply: www.mouser.com/ProductDetail/...
5V 4A: www.mouser.com/ProductDetail/...
BIOS socket: www.mouser.com/ProductDetail/...
My philosophy on buying tools is to start small and to "outgrow" your gear over time. Expensive gear won't improve your repair and fault finding skills, only practice will do that. With that in mind below is what's in my current toolkit.
🔧 Toolkit
Screwdriver Set: amzn.to/2X7s0Gj
Automatic Wire Stripper: amzn.to/30F5TJm
Pocket Multimeter: amzn.to/3IdvzQz
Component Tester: amzn.to/3l5rHG8
🖌 Soldering Essentials
TS100 Soldering Iron: amzn.to/2YIJZUR
No Clean Flux Syringe: amzn.to/2NFUZvQ
No Clean Solder: amzn.to/2NHEAqQ
Desoldering Braid: amzn.to/312Grws
Tip Tinner: amzn.to/31w2EF4
Contact Cleaner: amzn.to/3dI93ly
🔍 Soldering Add-ons
Fume Extractor with Hose: amzn.to/3hspLZi
Desoldering Vacuum Pump: amzn.to/3Qe9ipl
Hot Air Rework Station: amzn.to/3w023bF
Circuit Board Holder: amzn.to/3k35Pzm
Helping Hands Soldering Aid: amzn.to/3ihgksP
🔥 Thermal Compounds & Tape
Kapton Tape amzn.to/3DEu0dd
Arctic MX-4 Thermal Paste: amzn.to/2Ak2y8w
1.5MM Arctic Thermal Pads: amzn.to/2Vv1RQU
🧴 Lubes and Epoxies
White Lithium Grease: amzn.to/2UApx5M
Plastic Epoxy: amzn.to/3up0LIm
Timestamps:
0:00 What's your revision number?
4:21 A quirky motherboard indeed
5:40 Socketing the BIOS
9:43 It all starts with a recap
13:10 Operation RGB Bypass
14:14 Who is this C-SYNC fella?
15:47 SNK didn't know Right from Left
16:54 Damn... I'm looking good!
Пікірлер: 238
The mullet is getting better with each episode!
@Enraged-Gecko
8 ай бұрын
A mullet is damn near obligatory when you refurbish the Cadillac of ‘90s game consoles… it’s almost a crime that there’s no montage.😂
Man, it's so cool watching how good you have become at modding and fixing these old consoles.
@BorderlineOCD
Жыл бұрын
Lots of practice and good flux!!
Hint. To unsolder bent legs, you can use a (very) large-caliber needle from a syringe (like one you use for flux tube, or maybe a bit lower diameter). You just take a needle, put it on the tip of the leg, melt the solder with a soldering iron and unbend the leg back into place. And another tip. To punture a hole in clogged via, you can use simple wooden toothpick - melt the solder and insert pointy tip of toothpick into via thats it. Thanks for videos. I really like to see this stuff.
Very underrated channel, we love your content man!
@joveaaron-real
Жыл бұрын
SAME!
@oconquistabolo
Жыл бұрын
he should post more often, he would definitely get more recognition
@onebladeprop
Жыл бұрын
He's steadily growing. At this rate I think it will really blow up in about a year.
Why did I just find this channel? KZread needs to do a better job at recommending channels. This is pure awesomeness. Subd
i love the simplicity of these old consoles. New consoles have got way too complicated which makes them more fragile and expensive. None of these old consoles are perfect and most have issues of one sort or another but they do all live on far longer than the manufacturer thought they would. But that makes things so wonderful when you can get hold of a unit from your childhood or maybe even before your time. Love the vids, you have a fun hobby
@oblivieon1567
Жыл бұрын
Another issue is our eyesight 🧐has gotten worse with age as the newer console components got smaller. It's not fair! 😢
Been binge watching these videos for a week. It's like ASMR for geeks, I love it!
@BorderlineOCD
Жыл бұрын
Glad you like them!
@FallApartMan
Жыл бұрын
😂
You're very underrated I appreciate the videos you make and how you break things down I just turned 46 I had got me a neo geo system when I was like 22 from a game trader store at a mall back in the day and when I took it apart I wanted to solder some wires to that led light that was in the back and make a little puncture hole and hook it up at the top lol thank you very much for the video
@BorderlineOCD
Жыл бұрын
It’s that inner desire to tinker. Once you get the bug, it’s there for good.
The AES holds up great as of today. So many great fighting games.
@ShinryuZensen
Жыл бұрын
Not only fighting games: the NEOGEO was king of nice , fun games in general.
@BorderlineOCD
Жыл бұрын
If you enjoy class arcade games nothing comes close. Modern arcade ports just don’t have the same feel.
Absolutely incredible content, wish I had discovered the channel sooner. The production quality/presentation/editing is amazing!
That desoldering gun video montage sounds kinda like Sardaukar Chant from "Dune". 😂 Another easy operation by Dr. Borderline himself! Sweet! 😁
@BorderlineOCD
Жыл бұрын
It was uneventful, but I’m always a little bit nervous firing up the system after a lot of work is done to it like this.
I trully admire your organizational skills. Your workspace, shelves, etc are so organized and clean! I wish I could do the same with my home office but I'm a lazy slob when it come to that 😁
@BorderlineOCD
Жыл бұрын
You can, might take a weekend but you’ll get it done. You’ll feel lighter and eager to spend time in your office when it’s nice and organized trust me!
@huldu
Жыл бұрын
Everything is so professional and well executed. I've seen a lot of similar channels and many of them do not come close to this. Many of them try joke around while working but it just gets over the top silly, like scripted. Most of us just want to see a professional do their magic while restoring/fixing old or new hardware and hopefully learn a thing or two in the process.
@ferndog1461
Жыл бұрын
That could be it's own channel for Patreon supporters. Dunkin' / $tarBucks / TimHortons toast to you.
@Nordlicht05
Жыл бұрын
@@BorderlineOCD when I start a new project it goes boom pretty fast. I do it regularly with organising. But it's needed 😂
those shelves look epic, love the content and tutorials, keep up the excellent work!
Accurate and beautiful soldering, and very nice narration of what's being done, thanks.
@BorderlineOCD
Жыл бұрын
Thank you very much!
@Enraged-Gecko
8 ай бұрын
The soldering on his Sega Master System II RF out to composite cable conversion was even better, as hard as that is to believe. New consoles manufactured today don’t look that good.
The coldness of that "Yeah, boi" at 3:06 SENT me
Amazing work as always brotha! For those components with the legs bent parallel to the board, I like to leverage them up and snip them as flush as possible with flush cuts before desoldering. It's still a pain and isn't perfect but it helps quite a bit.
@BorderlineOCD
Жыл бұрын
Thanks bro. I might have a bit more patience to do that than wet them with the iron and bend them straight before desoldering. Heavily edited and sped up video- the recap took just shy of a couple hours. Not looking forward to doing that again soon 😅
never get over how "angry" older chips looked, tbh they had a awsome look, if it wasnt feet it looked like jaws.
Man, that KOF game looks crisp, and I don’t remember seen those animations, awesome mod. Great 👍!
@BorderlineOCD
Жыл бұрын
The intro music for that game always gets me pumped up
Lovely clean setup, great video, descriptive and very informative. Love the camera views and info in the description, thanks , subscribed
I really liked your job. A very clean and conscientious service, with very adequate and accurate tooling. Congratulations.
You can overcome most of the TV moiré effect(the swirling) by recording with the camera in a diagonal position. You lose some sharpness but I think it looks better than the moiré effect
amazing video as always, i see huge success this year for ya, and you deserve it 100% keep doing what ya doing 👍
@BorderlineOCD
Жыл бұрын
Thank you so much!
I will NEVER AGAIN sell my Neo Geo. I had one NEW in the box back in 1992, sold it, then in 97 got a used one, sold it, and now got another one back in 2005, NEVER AGAIN.
Neo Geo is such a rabbit hole. I've been a fan most of my life but gave up on OG hardware. I put a Pi3 into a Neo Geo X dock and couldn't be happier. It looks like an AES but man it's so much simpler. Great video though, for an OG unit it's awesome.
It's therapeutic watching videos like this one.
2 uploads in a week . Thanks for the good content
@BorderlineOCD
Жыл бұрын
Every day I’m hustlin
one thing i found useful for stubborn through holes is when you use hot air to remove the chip, keep the hot air running but held slightly further away and use your desoldering gun to vacuum it out whilst its the solder is still molten from the residual heat
@BorderlineOCD
Жыл бұрын
That’s a good tip. I’ve did something similar on the Crystal Xbox recap video for a couple of really stubborn caps but I had the board vertical in the holder, with the hot air from the back and desoldering gun in front.
I love this channel, amazing content makes my day when I see the notification
@BorderlineOCD
Жыл бұрын
Happy to hear that!
Anyone doing restoration on the console AES, the MVS (esp gen 1) carbon resistors sometimes drift out of spec over time. Lower quality ones exhibit this moreso than others, especially if the unit was stored in less than ideal conditions. Check the values if time permits. Metal oxide replacements are perfectly fine and tend to last a lot longer.
@jeffgoodnough9704
Жыл бұрын
Looking toward my own Gen 1 MVS project, that's super helpful. Thank you!
Your soldering is spot on. I watch a lot of folk doing this stuff and they do good and perfectly acceptable soldering work, but most of the time you can tell by looking it's been done by a 3rd party. Your joints look factory.
Your videos are always mixture of entertainment and educational. Pure awesome.
Love your vids. Binge-watched about 10 a few days ago. 😂
@BorderlineOCD
Жыл бұрын
Glad you’re enjoying the content.
Your background looks so organized I thought you were on a green screen.
Love the Videos man. Keep em up. I'm new to this Channel but I truly appreciate you and the videos. Thank you!
Fantastic job
I remember as a kid dreaming of owning a Neogeo but the games cost nearly the same price as Snes or megadrive consoles
wait, is the audio from EVERY Neo Geo mirrored unless you do this?
@BorderlineOCD
Жыл бұрын
3-6 motherboard revision only
Impeccable work, as usual. Love it
@BorderlineOCD
Жыл бұрын
Much appreciated
Love it, very clean work. You’ve inspired me to do my early 5V US model, but I wouldn’t mind grabbing a later revision unit like that one
Maybe a useful tip: to desolder those folded legs @ 11:26 without scraping the board, use a soldering iron to heat the leg up, bent the leg straight before using a desoldering gun.
That's what i call a perfect modding plus recaping, with a very good preparation before even pulling the soldering iron. Heart warning to see that someone still cares and do his best for old consoles! Well done!
@BorderlineOCD
Жыл бұрын
These beauties deserve nothing less than my very best.
Amazing soldering skills!
10:44 - 10:55 sounds a bit like a Cyberpunk 2077 soundtrack. On the serious side, amazing video. Thanks for sharing!
@BorderlineOCD
Жыл бұрын
Haha it does a bit.
The neo geo is the one system that'll forever be out of my price range but man what an awesome system
@BorderlineOCD
Жыл бұрын
You can always sell a kidney and make things happen.
@BorderlineOCD
Жыл бұрын
You can also enjoy the entire library for free via emulation. There's more than one way to skin a cat.
Thank you so much, again a nice 'tutorial/how to' to keep for my future mods. A+
@BorderlineOCD
Жыл бұрын
Enjoy!
Very neat soldering, nice work
@BorderlineOCD
Жыл бұрын
Thanks 👍
Great video, as always.
Another OCB approved item. Great work and mod. Enjoy these videos.
@BorderlineOCD
Жыл бұрын
Thanks again!
I like the way you work on electronics! So well done, I mean like its well thought out, and cleanly done. Like how you made your own capacitor diagram, and marking where they are on the board before flipping it over, all the equipment you have, and its just so... wow!! I really wish I could have learned how to work on electronics from college the way you do, it would have saved SO much stress and headaches! Whenever I tried modding or repairing my own consoles, I would always do SOMETHING wrong, and it just made me lose confidence in my abilities, and I eventually lost interest and dropped out. Watching this makes me think that I could get back into electronics if I just didnt rush through things and thought things through! Where and how did you learn to work like this, man?! Instant subscribe!!
awesome mods sir, hope you can do some repairs like PS3 FAT launch model, PS4's (Fat, Slim, Pro) and PS5's (with Disc tray, or without disc tray)
@BorderlineOCD
Жыл бұрын
I may consider it, but I’m just not very attached to them. My personal history with video games kind of tapers off at the Xbox 360.
Clean work, thanks for sharing.
@BorderlineOCD
Жыл бұрын
Thanks for watching!
Great work dude.
@BorderlineOCD
Жыл бұрын
Thank you!
Great video as always
@BorderlineOCD
Жыл бұрын
Thanks man
I just did the simple 'trace cut' mod on my 3-6 board,gives perfect RGB
Thank you for sharing your skills :)
Amazing content as always can't wait to get a few tools in so can start doing these kinda projects.
@BorderlineOCD
Жыл бұрын
I resisted buying more tools for the longest time, but I have to admit a project like this would be very challenging without the soldering gun and the hot air.
@shadowarez1337
Жыл бұрын
@@BorderlineOCD got those finally just need this solder gun so much easier then using a wick can't seem to get the hang of that.
As always, great job. I love watching your videos, your content is always very interesting!
@BorderlineOCD
Жыл бұрын
Glad you enjoy it!
Great Work Buddy...
@BorderlineOCD
Жыл бұрын
Thanks ✌️
I’d love to have a consolized mvs system. Hell I’d settle for a cd based system
I did exactly the same mods to my aes with it being my favourite of all.
nice work. I did mine long ago and did the power LED under the reset switch mod as well.
@BorderlineOCD
Жыл бұрын
Nice 👍
Love your channel 👍 Superb stuff and a great job too!
@BorderlineOCD
Жыл бұрын
Thank you so much!
Good work man.
@BorderlineOCD
Жыл бұрын
Appreciate it!
If you did offer consoles for sale I would buy love to buy from you! Your work and knowledge and eye to detail is second to none and also would know exactly what I'm getting with no bs! Keep up the excellent work!
@BorderlineOCD
Жыл бұрын
Maybe one day!
Mad KOF skills, this has really made me want to get an AES system.
@BorderlineOCD
Жыл бұрын
I used to think I was good, until a buddy of mine visited last July 4th weekend. He apparently also grew up on Street Fighter and similar arcades. I'm not exaggerating when I say we played a good 100 rounds over that weekend and I maybe won about 10. In summary, I'm not nearly as good as I thought I was, but it will forever remain my favorite genre of gaming.
Man I love your methodical working style. And your easy explanations even if I don't have the skill to copy you ! 😀
@BorderlineOCD
Жыл бұрын
I appreciate that!
Those were some clean inputs on that arcade stick. 🤘🏿🤘🏿🤘🏿
@BorderlineOCD
Жыл бұрын
For a 30 year old arcade stick it feels awesome!
Very interesting video, thanks for sharing it 😁👌
@BorderlineOCD
Жыл бұрын
Glad you enjoyed it
Truly amazing
@BorderlineOCD
Жыл бұрын
Thanks buddy.
Another great one. Now I know where to send all the stuff my wife makes me throw away...
@BorderlineOCD
Жыл бұрын
Try convincing her it’s an investment that will pay great dividends in future 😅
When the legs of caps are bent over like that, I prefer to trim them as flush to the board as I can safely do with some cutters to make desoldering with the gun a little easier. A bit more work, but worth it in the end.
To unclog the holes, preheat your board with the hotair, then use the desoldering gun.
Oh, I used to modify a lot of NeoGeos AES/MVS for friends over 20 years ago. Some with a switch for original bios/unibios, led reset button, stereo output on the back, ... I know I have some NeoGeo AES and MVS stored in boxes, after finish remodeling my home I´ll unpack them enjoy some games with the unique joyboard.
@BorderlineOCD
Жыл бұрын
Very cool. I haven't heard of the switchable BIOS mod. I'm assuming you do a piggyback install and switch VCC or something?
@SHINdanny
Жыл бұрын
@@BorderlineOCD yes correct, it is not that hard but it was very useable at the beginning of the Unibios development :D I enjoy your content very much and the way you work, desoldering not needed -> dissapeared from the working area ;)
Great methodical work. Preparation is key to an easy mod. 👏
@BorderlineOCD
Жыл бұрын
Thank you.
Found your channel while browsing Neo Geo vids and just wanted to say thank you for making these. I really enjoy them especially ones where you have to fault find you way through a PCB. Your narration is nice and clear and explains your thought process really well. I know in your NeoGeo repair-a-thon vids you mentioned maybe a Neo Geo CD in the future; just wondering how that is coming along or if you first need to source a console? Please note I more than understand how crazy expensive these are so I am not demanding/expecting a vid anytime soon, just moreso curious if you had any updates/thoughts on it? Cheers from Australia!
11:10 For desoldering leads at sharp angles like that I heat up the solder and use a pair of blunt tweezers to carefully bend the lead straight up. Then add some fresh solder and the desoldering gun will cleanly free the lead.
@BorderlineOCD
Жыл бұрын
That's a good tip!
Yeah Dud...your content really is great! Subscribing now.
@BorderlineOCD
Жыл бұрын
Welcome aboard
A bit of advice if your desoldering folded over leads it's a safe practice to heat the joint up with an iron and use flat tweezers to stand the legs up before using a desoldering tool. That way you won't damage the board. BTW how the hell do you keep your table so clean and organized? I'm so jealous. Ten minutes into a project and I'm already loosing tools in the clutter I've created. Great show man. Love your vids.
@BorderlineOCD
Жыл бұрын
Good tip with the tweezers. I've always been a very organized person. I find it more enjoyable to work on projects when I approach them methodically.
I've been wanting an AES since I was a kid and put off buying one for the past year and now the prices have shot up even for broken consoles.
Dope video !
@BorderlineOCD
Жыл бұрын
Thanks 💯
Nice vid detailing the mods. Glad I picked up a pre modded unit - I’d be sweating beads! 😅
@BorderlineOCD
Жыл бұрын
It’s a project, that’s for sure. Couple of the folks that reached out to me over the years all seem to struggle with the BIOS socket the most.
Amazing video. If by some miracle I buy Neo Geo, I know what to do.
Fantastic work, neat video, nice pace, makes it look easy ! No only caveat is... Dude what's up with your hair ! 80s are over my dude :)
Only thing that would make it even more versatile is to have an Everdrive cart you could load modified games with.
Excellent skills man 👍 I always wanted a Neo Geo during my childhood, but could never afford to purchase 1. Maybe 1 day I can buy a AES 😂🤣😅
I have a huge console collection that i have hung onto and collected all my life that have been in storage a few years now, i stumbled across your channel from watching TronicsFix and northridge repair videos and after watching a few of yours i decided to pull some of my systems to see if they still worked, i found a few of them are no longer working ,some wont power on, others had display issues some i have already repaired this week which was a virtual boy and 2 gameboys those where pretty easy i just reflowed the ribbon cables for now but i will prolly do the VB perm fix at some point, but my nomad has a really bright spot in the middle of the screen which i belive is just aging caps, my sega model 1 and sega cd model 1 still work flawless, i replaced the belt in my model 1 sega cd a few years ago and thats the only repair its ever needed, but my model 2 sega cd no longer will power up when i put a cd in it, carts work fine though. and i think my super famicom has a minor display issue. Anyway i havent done any soldering in very long time, the last stuff i did was installing a executer 3 mod chip into my xbox back in 2007 i think , i figured the time has finaly come to where i need to go threw and start recaping all these systems so i orderd me a digital microscope, and a new 2 in 1soldering + rework station and a few other things iv seen on this channel. im gonna practice on some old pc motherboards i dont care about first and evently start giving it go. Watching your channel has given me the confidence to finaly give it try as i want to pass my collection to my daughter when she is old enougf to appriecate them. Oh yea after watching this video i checked out my neogeo and it is the 5v model ( 3-4 board ) with a realy low serial number its all orginal and never been opened and is still working perfect but evently i want to do the audio fix on it so that was pretty cool to learn after watching this
@BorderlineOCD
10 ай бұрын
Sounds like you got a nice collection. Great to see you getting into tinkering with it. Note: the audio L/R fix is only needed for the 3-6 revision motherboard. The 3-4 audio circuit has a bypass mod to improve it’s quality, but L/R channels are correct. Confusing I know but each revision board has its unique required mods/fixes.
@turdpeterson73
10 ай бұрын
@@BorderlineOCD the audio fix im talking about is to replace components snk removed in the 3-3 / 3-4 versions which causes power hum to be heard, the 3-5 boards they put the Components back in, its just a couple Ceramic Capacitor's that goes on the back side and 1 Electrolytic Capacitor
Nice video.
Какой автор красавчик и аккуратист, люблю такую работу. Жаль мне не удалось достать эту консоль, зато получилось собрать на основе аркадного автомата.
50k subscriber special idea: supercut of all screw and solder removal clips only from all you videos
Wow nice work! 😮😅😊❤
yay new video 👍
@BorderlineOCD
Жыл бұрын
🎉
Great video as always. The picture could be even better and no lag if you had a crt. How come you do not have one ?
@BorderlineOCD
Жыл бұрын
It's pretty legit through the RetroTink, but I plan to acquire a CRT at some point. Haven't found what I'm looking for yet.
MOAR content please
thanks for showing this i think im going to recap a few of my mvs boards & then the aes no rgb bypass or audio mod for me 😅 (i can just swap the red/white cables on my speakers lol) console5 is legit ive ordered a bit from them
I wish this video was out years ago when I did my first bios socket. I admittedly blew it. It sucks. I have since done 3 more successfully. Expensive mistake
The guide from FirebrandX suggests optional 220uf 25V caps on the RGB lines to protect against voltage backflow. I added these inside of my system in place of the removed caps, but the end result is much less clean.
@BorderlineOCD
Жыл бұрын
What does your end result look like? Is the image darker or do you just still see some jail bars?
@BasementBrothers
Жыл бұрын
@@BorderlineOCD I don't think the caps themselves resulted in any noticeable difference. They're just there to create a more correct electrical circuit. By "much less clean" I just mean my mod work inside the console was not pretty. Results look good. I also grabbed CSYNC from the TTL sync in on the Sony encoder chip and attenuating it. The reason I put them in the console rather than the cable is because I use the same RGB cables for my Neo Geo CD and CMVS. Thanks for the professional quality, interesting video, as always. Your Neo Geo videos always make me want to go play KOF 2K1. 😁
Great vid! Have you had the chance to use RGB Scart on a CRT at any stage? It's like night and day. It was the only pro of being stuck with poorly converted PAL 50hz games!
@BorderlineOCD
Жыл бұрын
I haven't yet, but I'm on the lookout for a decent CRT with components inputs which I plan to hookup with a RetroTink RGB2COMP. I'm sure I'll find one eventually!
Great work, great explanation. I regret selling my AES to this very day. It’s now way too expensive for me to get back into. With that being said I might purchase a boxed console and SD cart one day but unfortunately the games are a no go for me now.
Weird that the white silk screen marking for the caps is actually positive, I thought you put in some backwards until I rewound and checked.
@BorderlineOCD
Жыл бұрын
Great minds think alike. I had the same thought. It was even confusing me when I was putting the capacitors back in. I stopped looking at the board and just paid attention to my diagram. Very counterintuitive.
Nice 🙂
@BorderlineOCD
Жыл бұрын
Thanks 😋