Thank you for making the vid. I feel for you. This same truck was gifted to me BRAND NEW. I ran it about 10 minutes and didn t event bash or jump it. Then the front shock blew apart. I contacted A frame and they sent me everthing to rebuild EXCEPT THE SPRING. So I wasn't even able to ride this thing at all. So after 4 months I drove 130 miles to a hobby shop that helped me. These guys were EXCELLENT! Very knowledgeable and had the parts in stock! I'm so happytobe able to run my brand new Vorteks. Schaefer's hobby Shop. St. Louis, MO 63126

@UDRC85

2 жыл бұрын

That is awesome. I am glad they got you up and running.

KZread needs these types of vids to help ppl👍 awesome ud rc👍 ud rc tips n tricks series😜👍

@UDRC85

3 жыл бұрын

lol thanks for viewing brother. Can’t wait to run it.

only video that makes sense to me... thx sir! '

Nice video, this helped a lot, I will recheck all tomorrow.

@UDRC85

2 жыл бұрын

Appreciate you watching my vid. 💪🏾

I’m definitely thinking about buying this one.

@UDRC85

3 жыл бұрын

So far I like it. I have not ran it yet but it should be good.

@iCanBuyMyself420

3 жыл бұрын

It’s bigger than it looks and flys hahah

Good set rc mate 👍

@UDRC85

3 жыл бұрын

I appreciate that. 💪🏾💯👍🏾

Thanks for this video brother! simple and clear instructions. keep it up and looking forward on your next vids. Subscribed! :-D

@UDRC85

3 жыл бұрын

Thank you very much. I appreciate your support. 👊🏾

Being a complete RC rookie, I initially only wanted to know what all the controls on the spektrum controller where and if I needed to worry about them before my first run. I skipped over the first part about double checking the axle to hub screws and the steering alignment. After one LiPo's worth of driving, my right front wheel flew off! It was that screw. Also, when going back to double check the rest of the wheels, I noticed rubbing damage to the ends of both front axles. I assume it happend because the steering end points were not set appropriately from the factory and they were rubbing on the inside of the steering block knuckles. The left knuckle was also completely broken at the lower screw attachment area. Probably from crashing it without the proper steering end point settings. Superglued that back together...maybe it holds?! and then ordered all new anodized aluminum struts and suspension linkage parts from Arrcat. Wish I had heeded your advice from the beginning. Thanks and look forward to watching more of your videos!

@UDRC85

2 жыл бұрын

Thank you very much. I was shocked to see my car had broken parts from the factory. Definitely worth looking the car over. Almost every car I get new or used I tend to give them a look over.

@tylermorath9098

2 жыл бұрын

Could definitely use some aluminum upgrades, but when it comes to the A-arms, I always tell folks to stick with plastics. Your A-arms are the one part from chassis to wheel that don't have some give to them. Everything else has a bit of wiggle room, meaning when you make an impact, the only part that DOESN'T give is your A-arms (until they snap) If you swap those with aluminum, you'll transfer that breaking point to another component (usually something more intricate/expensive) I'd highly recommend to go with plastic A-arms from "RPM." They come with a 100% warranty, so when you do snap them, you just ship em out, and you'll get your replacements in a few days. All you gotta do is pay a few bucks for shipping.

highly recommend pulling out the spur gear and and checking that as well.

I bought one the sec week after it being out had for about a mouth and was loving it . then the esc went crazy started controlling the car on its own and it broke alot of the drivetrain

Thanks bro 👍🏾

Quality content brother!

@UDRC85

3 жыл бұрын

I appreciate that bruh. I do the best I can. Thanks for the support. 💪🏾💯👍🏾

@LittleTimmyPool

3 жыл бұрын

@@UDRC85 absolutely! 🙌

Good video 👍☺️☺️

@UDRC85

3 жыл бұрын

I appreciate that. 💪🏾💯👍🏾

thanks was looking for a calibration and steering guide, i felt stock brake setting was too weak and 87% seemed perfect.

@UDRC85

2 жыл бұрын

Glad I could help

great vid. almost identical setup for vorteks as my senton. i got my wife the Purple/Pink Vorteks body. Have to admit the pink and purple is sick. the pics and vids online dont do it justice. Its like a metallic paintjob look. Is that how your blue and red body is?

@UDRC85

Жыл бұрын

Yes has an awesome paint job also. They did a great job with the paint. Congrats on the new truck fir your wife.

@joeloewe8289

Жыл бұрын

@@UDRC85 at first she was like you spent what on the 2 trucks,but i think that kinda blew over once she punched the trottle down the road and across the field lmao. Have you put the speed pinion in yours with 3s.

@UDRC85

Жыл бұрын

@@joeloewe8289 I did before a while back. I may have hit 50+ mph I believe. I did a video on it.

@joeloewe8289

Жыл бұрын

@@UDRC85 sweet,i subscribed. ill look for it

I'm having an issue with absolutely no response from remote to esc. I've head something about binding but I fail trying all the time.

Is calibration different from binding? If so, how do you bind the car to the transmitter?

@UDRC85

2 жыл бұрын

Turn radio on, Center your trims, Steering and throttle set to 100%, Brake and avc to 100%, Turn radio off, With radio off turn the car on, Press the spektrum sign on the receiver( you will need to remove the radio box cover to see it) orange light will start flashing, Hold bind bottom on the radio and power the radio on at the same time, the receiver light will turn solid orange and the radio will turn green.

Hey bud I got a new dx3 transmitter cuz my other one got messed up I installed in and binded it but whenever I'm driving my car it's pulling to the right you know how to fix that

@UDRC85

2 жыл бұрын

You could check the steering trim on the remote. Turn the steering trim to the left a little bit at a time till the car drives straight.

I was driving mine in the yard today for the 1st time, followed this video, and the steering radius is terrible on mine, any ideas on fixing it?

@UDRC85

2 жыл бұрын

Power car on, then radio but turn full right and full break. Turn steering to right and use the avc knob to adjust the steering end point. Repeat for both.

@mattpotts8561

2 жыл бұрын

@@UDRC85 that's what i done, maybe i went a little too far on my end points, will do it again and see. Would having the avc knob turned half way have anything to do with it? 1st time having avc built in on a car.

@UDRC85

2 жыл бұрын

@@mattpotts8561 put steering and break to 100%, turn steering full right and full brake while turning the radio on. Turn full right, turn the avc knob to the desired travel. Release the steering then put avc back to 100% do the same for left turn.

How do you turn down the dual rate on the steering ? is that done on the AVC knob.

@UDRC85

3 жыл бұрын

Yes.

@UDRC85

3 жыл бұрын

I show it in this video. I hope the camera view was good.

@gillian9178

3 жыл бұрын

@@UDRC85 Yes I saw that, if you turn down the steering rate does the AVC still work ? Can you also turn down the steering rate on the fly simply by turning the steering rate knob.

@UDRC85

3 жыл бұрын

@@gillian9178 yes the avc should still work. Im not sure if you can turn down the steering rate on the fly. I’ll have to look into it.

@gillian9178

3 жыл бұрын

@@UDRC85 Yes its not very good if you have go into program mode on the tx every time you need to adjust the dual rate setting whilst you are out running the car. Hopefully there is a way you can turn the steering rate up or down simply with the st rate knob.

does anyome know why and how i can fix the stability? when i accelerate it pulls to one side

@UDRC85

2 жыл бұрын

usually you just need to adjust the steering trim.

Kinda crazy u got to fix on it out of the box

@UDRC85

7 ай бұрын

Yea I thought that was crazy also.