Around the farm with JT! Let’s begin paint on “Sully” the IH loadstar grain hauler!
Автокөліктер мен көлік құралдары
As projects are rolling in I need to get going on some of the old ones! Today I am going to start the paint on my newest grain hauler, the IHC loadstar!
Пікірлер: 199
Just a safety thought for you, when you are working on or around a lifted box on the old grain trucks, just for piece of mind, slide a 4x4 or 6x6 post across the frame. I've seen worst case where a lift cylinder seal had a leak to it for months and low and behold, it finally gave out with the bed raised. Anything can happen when you least expect it. Just be safe please. The new shop you built is turning out to be just perfect for whatever you venture into 👍. Keep up the good work JT.
@jtsbarnngrill6873
14 күн бұрын
Right on! I’ll keep one nearby for the next time 😉
@TKM1951
14 күн бұрын
That front clip looks like a donation from a school bus
@jtsbarnngrill6873
14 күн бұрын
It was!
Your new shop is like a revolving door for new projects. Keep up the content. Always enjoy watching. Thx
@jtsbarnngrill6873
13 күн бұрын
Thanks 👍
Great J.T! 👍👍 I hope you need both trucks at the harvest.🤑🤑 Wish you a nice week. Greetings from the Neterlands! 🤠
@jtsbarnngrill6873
14 күн бұрын
Thank you! I hope I do too 😉
@hanumon22
14 күн бұрын
Dutchman here. Born Canadian, but parents are both from Netherlands. Proud. Orange.
Like the ending. The only difference is a couple of $100,000 doing the same job, maybe just not as fancy or fast. Lol
@jtsbarnngrill6873
14 күн бұрын
Right! Gets the bushels from point a to b lol
When the angle grinder comes out you know the project is going in the right direction 👍🤣🤣
@jtsbarnngrill6873
14 күн бұрын
You know it 😆
Hey Joe,,good to see ta clipping along on another project. Cant wait to see the end result. If it "didn't always come to this" it wouldn't be any fun or challenge. Keep at it. Heading for the mountains tonight myself. Cheers 🍻
@jtsbarnngrill6873
13 күн бұрын
Right on! Thanks!
I remain amazed how you find way to improve your old machines. Keep making great videos! For a one man band, you do great work. Think smart. Work smarter. You have both. SW Ontario Canada here
@jtsbarnngrill6873
14 күн бұрын
Thank you very much!
Looking forward to seeing what the truck looks like with new paint. Hopefully you show some rust repair. Had to laugh at the Sanford & Sons reference. Thanks for the Videos.
@jtsbarnngrill6873
13 күн бұрын
Right on! I’ll be showing what I do in the upcoming vids
That new shop sure is making life better, you can sit at that roll up door with a cool pop and see your progress 😅!
@jtsbarnngrill6873
14 күн бұрын
Yes! I like how it’s going!
Keep it going We run all old stuff to🍻👍👍
@jtsbarnngrill6873
11 күн бұрын
That's the plan! 😉
I said it before you may not have the newest equipment around but it looks good & it gets the job done 👍
@jtsbarnngrill6873
14 күн бұрын
Right on! And no payments!
Good job there J T definitely beer time 😂👍
@jtsbarnngrill6873
14 күн бұрын
You got that right!
thanks for sharing. Both trucks need a matching ridiculous hood ornament so there is no doubt JT is in town! Gotta love when the kids draw for you ❤
@jtsbarnngrill6873
13 күн бұрын
😉. I’d love some sweet good oranments!
JT, good idea Cary Guyer had with the 4×4 or 6×6. We always stuck a post by the pivot point on the frame when working under there. Never trust hydraulics. I know of 2 farmers who got killed by the box coming down on them.
@jtsbarnngrill6873
14 күн бұрын
Right! Definitely have one handy for next time
nothing like a fresh canvas
@jtsbarnngrill6873
13 күн бұрын
Bingo!
Loved the ending, lol…….on that note something needs to be named Elizabeth!
@jtsbarnngrill6873
13 күн бұрын
It’s the big one Elizabeth 😆😆😆
Great work there JT!
@jtsbarnngrill6873
10 күн бұрын
Thanks!
Yeah another vid just in time for a beer in the sunshine 👍👍
@jtsbarnngrill6873
14 күн бұрын
Oh yeah!
I like how you can pull up one axle, when the truck is empty.
@jtsbarnngrill6873
13 күн бұрын
Right!
Excellent video JT :) , think weird my dad also uncle used 6 ton daul axles 1976 International stake truck gas and 1983 to 1996 used 1978 GMC High Series Serria Scottdale 3/4 ton truck with 1 ton in metal box a wood box for grain feilds to barn storage boxs on second floor for grainery on home farm to plus 2 rents ones! Then 1993 updates truck to a 1990 Chevrolet Cheyenne light duty 3/4 one and was lots work for 3 guys in day too and told my dad also uncle buy stake truck said don't need it Lol !
@jtsbarnngrill6873
13 күн бұрын
Right on! Thanks!
@AndrewHCann
12 күн бұрын
@@jtsbarnngrill6873 welcome JT :)
Great job JT. You might want to try a turbo nozzle on your pressure washer. I use one cleaning equipment and it takes the major part of the grime without using degreaser
@jtsbarnngrill6873
13 күн бұрын
Right on! I have seen them, just need to get myself one now!
JT, You need a can koozie to help keep the mountains blue longer. Cheers, Boe 🍻🍻👍
@jtsbarnngrill6873
14 күн бұрын
You got that right!
Your daughter is a great artist.
@jtsbarnngrill6873
14 күн бұрын
Thanks!
That's a Great project, looking forward to seeing it .😊
@jtsbarnngrill6873
14 күн бұрын
Right on! More to come!
Great job J.T. Take care.
@jtsbarnngrill6873
14 күн бұрын
Thanks, you too!
Glad to see that green C40 followed you home! But i suspect it will turn blue eventually, just like the International. I would vote for the original color, if you were taking a poll.
@jtsbarnngrill6873
14 күн бұрын
That is what I was thinking too
that gravel that you put down sure looks good nice job
@jtsbarnngrill6873
14 күн бұрын
Thanks! It’s been terrific!
Hey JT great job at Wally world I mean Walmart they sell a oscillating tip for your pressure washer put it in a circular pattern and it really makes a difference it will strip off anything it hits it's only 20 bucks you need to really try that out if you don't already have it big fan serenity
@jtsbarnngrill6873
14 күн бұрын
Right on! I’ll need to get myself one of those!
JT, Ur commented to get things done is amazingly like watching a kid in a candy store! U see something that needs painting and do-it.. Fluffy likes RED..
@jtsbarnngrill6873
14 күн бұрын
She does have an affection to red 😆
Nice video JT
@jtsbarnngrill6873
14 күн бұрын
Glad you enjoyed it
JT. Bought a pair of those Hisea boots. You're right. Very comfortable
@jtsbarnngrill6873
14 күн бұрын
Great! Mine have been very good!
That old corn binder sure makes a nice truck
@jtsbarnngrill6873
14 күн бұрын
Right! I sure like it!
Great video JT, there is nothing wrong with a little Sanford and son Equiptment , it’s about the only way I can farm 😂
@jtsbarnngrill6873
13 күн бұрын
Right on. It’s all I know 😆
You need to get some door art on those trucks and drive’m proudly. The Sanford and Son reference was aw3some. 😂
@jtsbarnngrill6873
14 күн бұрын
Right on! 😉😆
back in the day time for a cold schlitz
@jtsbarnngrill6873
6 күн бұрын
Right on!
Mountains are blue here too nice video
@jtsbarnngrill6873
14 күн бұрын
Thanks!
A couple of Texas longhorns or a deers rack should do wonders on that thing.
@jtsbarnngrill6873
11 күн бұрын
I like how you think!
if you can find somebody who scraps school bus'es you should be able to find 22.5 rubber on daytons to upgrade thats what i did on my old binder amazing difference riding on radials!!
@jtsbarnngrill6873
8 күн бұрын
Right! My other one has radials and rides pretty nice
I learned to drive a truck in one like that. 392 and 5x4. If you could find the grill to bolt on to the front of that it would stiffen the hood and probably prevent cracks in the future. Lookin' good JT.
@jtsbarnngrill6873
14 күн бұрын
Right on! Thanks!
Love your videos keep them coming! Can yiu do a review on that sand blasting set up please? I would definitely be interested on that!!!
@jtsbarnngrill6873
13 күн бұрын
I will! I’ll be using it again soon
Your stuff may not be the shiniest on the road or in the field but it is paid for and you are just as proud!!!!!!
@jtsbarnngrill6873
14 күн бұрын
Right on!
The things you get your self into LOL, Don't know what year the binder is, but my first day working on the Railway driving truck January 1965 was one that look just like this one with a 16 ft stake box. Your music sound on the very end just awesome LOL now that should be on all your videos!!!
@jtsbarnngrill6873
14 күн бұрын
😆. This one is a 69 I believe
New paint
@jtsbarnngrill6873
14 күн бұрын
Right on!
By the way,,,pretty cool the old boy has a lift axel.
@jtsbarnngrill6873
13 күн бұрын
Right!
Hey JT try taking that sandblaster attachment and connect it to an air hose. You can figure it out but it should work👍
@jtsbarnngrill6873
14 күн бұрын
Thanks for the tip!
Have you thought about getting a pto driven corn dryer like a tox-o-wic? We could see more of the Massy fleet in action in the fall!
@jtsbarnngrill6873
14 күн бұрын
Perhaps!
Are the mountains blue? Yes, they are! Stay safe in this heat. 👍
@jtsbarnngrill6873
14 күн бұрын
Thanks! Will do!
Thanks JT
@jtsbarnngrill6873
14 күн бұрын
Thank you!
You might invest in a turbo tip for your pressure washer it will get a lot of grime off without the hassle of the sand blaster attachment
@jtsbarnngrill6873
13 күн бұрын
Right on! I’ve had a few people mention that, I’ll be looking for one
The ol binder will look sharp all painted up,just have to find an old school bus and snag the grill.
@jtsbarnngrill6873
14 күн бұрын
Right! I’ll be on the lookout!
I felt the ending in my soul 😅😭😭😭🤣
@jtsbarnngrill6873
14 күн бұрын
😆😆
@frankfarms83
14 күн бұрын
@@jtsbarnngrill6873 nothing wrong with it though, proud of you my dude ☺️💪🏻💪🏻
Don’t forget the racing stripes
@jtsbarnngrill6873
13 күн бұрын
Right on!
COORS LITE What happened to OLDSTYLE!
Make sure you don't miss the Juneteenth/ Pride Month paint sale at Tractor Supply.
@jtsbarnngrill6873
14 күн бұрын
Interesting. As long as the paint is on sale 😆
@ACF6180T
14 күн бұрын
You have been watching Benny Johnson; TSC did go woke😆🤣🤣😂!
Nice one j.t as normal. Did you manage to do a deal on that massey at scrap yard like you did on other thing. Did you remember to do the pump on combin when it was in work shop. L.o.l. I like the new water sand plaster put you need lot off air pressure but doesn't make any mess really just water it really good bit of kit. From Andy in uk
@jtsbarnngrill6873
14 күн бұрын
I didn’t check on that one just yet, but I may if my TO35 needs parts
@andywilkinson3792
14 күн бұрын
@jtsbarnngrill6873 ok . Just let you know there is going to be a big tractor run. Dave maybe going. But its mainly all 1200 1250 and big ones like yours. If you check out farmer Phil. It's a one off. It's in memory off his uncle. Check him out please. He is a massey man. Thanks
👍👍👍👍👍👍👍
@jtsbarnngrill6873
14 күн бұрын
👍🏼👍🏼
Hey JT, have you ever considered buying a used military heated pressure washer? Hot water is freaking amazing at removing "gunk". You can generally score a used military hot water pressure washer for cheap because people just don't "know"
@jtsbarnngrill6873
14 күн бұрын
I’ll have to look into that!
@prevost8686
14 күн бұрын
Where did you purchase yours from?
@jondavidmcnabb
13 күн бұрын
@@prevost8686 FB Market has them occasionally and Ebay
No no no!! I wanted lime green and black!! Lol 😂 Great! No one listens to me! Lmao 😂 it's nothing new. I would swear you were a sibling of mine! For dramatic effect, just picture me walking away mumbling to myself.....
@jtsbarnngrill6873
14 күн бұрын
😆😆. Perfect lol
That's going to look great when you're all done! How long until you do the forklift since that's become such an important tool? You need to have brakes...
@jtsbarnngrill6873
14 күн бұрын
Hard to say, I’d like to get it done sooner than later, but I use it almost every day lol
Did your next project come from that cool junk yard.
@jtsbarnngrill6873
14 күн бұрын
It did!
Hey you know that oven cleaner works better the that degreaser does and it will remove some rust as well
@jtsbarnngrill6873
14 күн бұрын
I’ve heard that, but had a couple cans in the shop
@cmtfarms9777
14 күн бұрын
@@jtsbarnngrill6873 well me and my dad use oven cleaner on our 1566 international and it will cut through really tough grease unless its over half an inch thick and if you let it soak for 15 minutes it will eat paint after that so be aware of that.
That thing looks sweet. You should just clear coat it.
@jtsbarnngrill6873
14 күн бұрын
Not a bad idea
Could you put a check valve in the sand hose to prevent the water from creeping in? Just a thought...
@jtsbarnngrill6873
12 күн бұрын
That might work!
The sand hose has to be on the TOP of your washer wand....not the bottom. I know that's not how a siphon sandblaster is normally used ...but that's how you keep it from filling with water!
@jtsbarnngrill6873
14 күн бұрын
I’ll try that next time
My family used to have 2 of those trucks that were twins of each other one of them started on fire at the elevator and they turned the other one in to a dump trailer
@jtsbarnngrill6873
13 күн бұрын
Yikes! Hope this doesn’t happen to mine!
Jt i seen it ... awesome when we see it?
@jtsbarnngrill6873
14 күн бұрын
Next friday!
Mmmmm flatbed from Father’s Day junk yard run🤔
@jtsbarnngrill6873
14 күн бұрын
😉
JT do you drink water from a well on your property or is it mains? I'm Irish but I know wells are popular over there. I studied groundwater as part of my MSc just thinking about some things. Great video as ever!!!
@jtsbarnngrill6873
12 күн бұрын
I do have a well here
C40 from the Junk Yard
@jtsbarnngrill6873
14 күн бұрын
😉
My go to channel...lol
@jtsbarnngrill6873
14 күн бұрын
Right on!
JT what motor is in that truck? I think the fork lift needs to be next on the paint list and fix the brakes on it.
@jtsbarnngrill6873
14 күн бұрын
That has a 345 in it
The insert in the nozzle of that sand blaster attachment wear out. The replacement isn’t expensive.
@jtsbarnngrill6873
14 күн бұрын
I’ll have to get one!
I hope that the truck's gas consumption isn't taking the profit from your harvest. It should have a diesel engine if used a lot and worth keeping.
@jtsbarnngrill6873
13 күн бұрын
Well, I don’t like far from the elevator so hopefully it won’t drink too much
If you get all those door hinge bolts out without snapping some off, you’re a lucky man indeed! From my experience with those, that just doesn’t happen…..
@jtsbarnngrill6873
14 күн бұрын
Right!
Well JT while you’re dismantling your truck I’m dismantling my garage. I’ll have it on the ground soon. My new garage will be 30 by 40 that should be enough space for two vehicles 🚗 and!!!!!!!
@jtsbarnngrill6873
14 күн бұрын
Perfect! That’ll be a great shop!
blue wire was for the school bus lights🤭
@jtsbarnngrill6873
14 күн бұрын
👍🏼
Your daughters quite the artist. How old is she ?
@jtsbarnngrill6873
13 күн бұрын
Senior in Hs
That beer looked liked it was sweating more than you😆. Luv the ending of the video reminds me of my 1999 C3500 1 ton dump truck the A/C doesn't work or the radio; So every time I use it the theme song from Sanford, & Son pops into my head🙃. I hope Ya got to enjoy that beer before it got to Germany temp.🍺Cheers🍻😉.
@jtsbarnngrill6873
14 күн бұрын
Got it down just in time 😆
@ACF6180T
14 күн бұрын
@@jtsbarnngrill6873 Chug a lug! Reminds me of your fathers day video; ( Out of beer out of time ). Have a good safe week.
Blue? Hell I always thought it was Black. Oh well.
@jtsbarnngrill6873
14 күн бұрын
She’s a dark blue
Does the IH truck have a cherry Bomb muffler on it??
@jtsbarnngrill6873
14 күн бұрын
It has 2 of them lol
If you get the right grill it will look a $1000 worth better
@jtsbarnngrill6873
14 күн бұрын
Right on!
Does it have a rear lift axle or did you park it on the lean?
@jtsbarnngrill6873
14 күн бұрын
That has a lift axle
@davewallen1540
14 күн бұрын
@jtsbarnngrill6873 Aahhh! I thought it was a powered axle.. love that truck! Your doing great buddy! Thanks for the entertainment and teaching us all!
A chevy c50 or 60
@jtsbarnngrill6873
14 күн бұрын
You’re very close!
@JohnSmith-lw2bm
9 күн бұрын
Ok a c40, tough to tell with the first 8 inches of the truck!! 😂
Love to have a beer and a bullshit with JT.
@jtsbarnngrill6873
13 күн бұрын
Right on! 🍺
JT you look like I did when I was a kid with chicken pox.
@jtsbarnngrill6873
14 күн бұрын
😆
You bought that c60 didn’t you?
@jtsbarnngrill6873
13 күн бұрын
C40 😉😉
Why not take the truck out side and support the doors with the forklift so you can take them off easier
@jtsbarnngrill6873
14 күн бұрын
They weren’t that bad.
@richardschaffling9882
14 күн бұрын
@@jtsbarnngrill6873 you are still young it has not caught up to you yet Waite till you are older and every bone in your body hurts and you think back and say I should have taken better care of
You took it like a man - don't get mad - get an angle grinder ... Cold - problem solving fluids and a chair is vital for any project.
@jtsbarnngrill6873
14 күн бұрын
Bingo! I like that one 😆
First comment!
@jtsbarnngrill6873
14 күн бұрын
Yes you are!
Don’t do it , I have a 76 model dump truck identical to it ,,, school bus hood and white cab 😂😂😢😢😂😂
@jtsbarnngrill6873
14 күн бұрын
Ha! Perfect lol
the new project is PORSCHE car for your daughter . i'am correct ?
@jtsbarnngrill6873
14 күн бұрын
Close. 😆😆
You don’t need shiny things to make money
@jtsbarnngrill6873
14 күн бұрын
That’s for sure!