🚨DISCLAIMER🚨 This review is an honest review using this product as Armor All states in their instructions on the bottle. I am NOT bashing this product or Armor All I am simply testing a product to see if it will perform to the claims that they make on the bottle. Please remember to HIT that thumbs up if you like honest reviews and also consider subscribing to the channel if you haven't! Drop a comment below ⬇⬇⬇and let me know if you think this product lives up to their claims.

** DO NOT LET DRY ON CAR ** I have a detailing & paint correction business & i specialize in ceramic coating. I try a couple soaps each week, this is how I came across this particular one...so my friend's son washed her car & left it soapy. (Black car,, very warm So. Cal day about 1month ago) The sever stains in the paint and on the glass did not come off, or get lighter... even after the 3rd wash. (Since it has ceramic in it, ceramic bonding without being leveled or buffed off & allowed to dry, becomes permanently discolored until paint correction is done.) After trying everything I could, I ended up doing a full paint correction, (cut/buff + polish) & then Ceramic Coated the car bumper to bumper. The stains only went away during the cutting stage, just polishing with a Da & black spider pad was not even removing them. So... be careful if u use this, especially in the heat. Or get a better soap. 😊

@MeanBee392

3 жыл бұрын

Wow thanks for sharing that buddy! I keep hearing people mention they are having this problem with this car wash and it is sad that an $11 bottle of this is causing such bad problems for people. I agree what you said what it is doing and I don't think it rinses very well leaving product behind causing high spots when it drys. Sounds like you had your work cut out but you were able to get it turned around. Haha yes I agree just get a better car wash! Thanks for sharing, watching and commenting buddy!

Really thorough! Thank you for putting the time into this. This is very helpful.

@MeanBee392

2 жыл бұрын

Thank you I really appreciate it! Glad to hear that you enjoyed the video and time that went into making it! Thanks for your support on the channel!

I love this product! Even used it on my solar panels and noticed an increase in power generation. I use a brush when cleaning car and to make foam just swish it around for a few seconds to foam it up nicely.

@MeanBee392

2 жыл бұрын

That is crazy but also a good thing that it helps out with power generation. That would work to get it to suds back up and there is nothing wrong with having to do that. Thanks for sharing your experience with this product!

@ryleedenney7872

2 жыл бұрын

That’s honestly a pretty cool idea. I’m assuming it’s for your house? How much does it save you? I’m thinking about going solar when I build a house

Great review! Thanks for testing this one out for us all.

@MeanBee392

3 жыл бұрын

Thanks! You are very welcome and hopefully my video helped shed some light on this product for everyone.

Hey man. Very nice demo. I was actually impressed the beading when rinsing off initially. Thanks man and hope you and the misses are doing well.

@nicorallysport

3 жыл бұрын

👋 Phil 😁

@MeanBee392

3 жыл бұрын

@Miranda Detailing Thanks buddy! I was very impressed as well but then started to get very confused after the contact wash and seeing the panels go flat. I think it has the potential to be a decent product but I do feel it needs some refining. We are doing well! I hope you any your misses are doing well too. Thanks so much for stopping in and taking time to drop a comment it means a lot to me brother!

@MirandaDetailing

3 жыл бұрын

@@MeanBee392 You’re welcome! Yeah that was weird. 🤷🏻‍♂️. I think you’re right about the soap basically washing off the layer it just applied after the first rinse. Yup, some more refining should help. Probably they should make it more concentrated. Garage is looking nice also.

@MeanBee392

3 жыл бұрын

@Miranda Detailing That was the only thing that really made any sense to me was applying it heavily concentrated out of the foam canon then using it heavily diluted out of the wash bucket just reversed the process 🤷🏻‍♂️. I strongly agree that if they would make it a more concentrated formula it would preform a lot better. Thanks buddy I am really hoping to get a lot done to it this summer and slowly make my dream garage a reality.

I have had just the opposite results, I have used it on 3 vehicles, one has a 2 YO Ceramic coating of CQuartz UK 3.0, one was waxed a year ago, the other is a 5th wheel. The first one I washed was the truck that was waxed last year and sits outside 24x7x365. The pre-rinse showed no beading whatsoever anywhere on the truck. I foamed it with 8 ounces for 32 using the ArmorAll foam cannon on my 3200 gas pressure washer. Doesn't foam as well as Chemical Guys VO7, but still got foam. I then rinsed it down, and used 2 ounces to 2 gallons water in the wash buckets and washed it all down. On both rinses, the first made my jaw drop with how well it beaded, the second rinse was just as impressive as the first. It beaded up better than when the truck was freshly waxed and the surface is nice and smooth. My second wash was my ceramic coated F150 that is garage kept, and had not been washed in over a year due to not being driven because of the plandemic. Same wash technique. Pre-rinse showed the usual beading from the ceramic, foamed, rinsed and the beading was amplified over the original beading and the paint is super slick. I went over it with the wash mitt and rinsed and the truck glowed. The 5th wheel same story but I use a long brush to wash it with and do it a section at a time. I waxed it last year, took a week, I no longer feel I need to wax it, the water just falls right off. This stuff is the best wash I have ever used, and I have used a lot of high end Ceramic coated car washes, from CarPro, Chemical Guys, etc. none leave the paint beading with just laying foam and rinsing, none. One huge word of caution, when it says do not let dry on paint, they mean, do not let dry on paint. I missed a small area that dried on my F150, and boyoh, what a pain to get the marks off. I had to use a polish cloth with Reload to remove it. It does not wipe off, it does not wash off, I had to use a SIO2 based spray to remove the marks. That tells me that it does put a layer of ceramic on the paint because once SIO2 sets, you pretty much have to polish it off. I think the one advantage I may have had over this one is that my pressure washer is 3200 PSI vs the electric ones, so my rinsing can remove more surface dirt. I use a 40* tip to prevent paint damage, but have used it to remove paint from a rusted bumper too, a 20* tip can really blast the paint off, and the 0*, takes the rust off.

@MeanBee392

3 жыл бұрын

Thank for your time watching and commenting! We all have different results with product and this one was a fail for me but that does not mean that it is a bad product because a lot of people like it. I have product's that I review that I really like and other try it and they may have different results and dislike them. I think using this product after a wash for a foam on rinse off to add some protection it would work great at but for the over all lubricity and clean power it fell short for me. But I do appreciate you sharing your experience with using this product and glad to hear that you like it and it works great for you.

@digger105337

2 жыл бұрын

Plan demic, I caught that. Dr Fushay doesn't like when you say it out loud. 😉

I found this review helpful. I have learned I need to prewash my truck before using this product. Thanks!

@MeanBee392

3 жыл бұрын

Glad you found the video helpful and informative! Yes I think that is the best way to do it using this product. Thanks for your support watching and commenting!

Use it on boats I detail and on my 2006 Chevrolet truck. It's designed to be used as a booster, to boost the protection that you have already applied to the vehicle. Works great as a maintenance wash.

@MeanBee392

2 жыл бұрын

Thanks for sharing your experience with this product and how you like to use it.

Interesting results. I’m getting the hydrophobic properties from a non-pressurized foam cannon as well as with a two bucket wash method. And it lasts over a week (although it diminishes a bit after 1 day and then remains consistent). Maybe I don’t dilute my wash bucket as much? Definitely doesn’t protect against dirt and stuff like I thought it would, but water definitely beads on rainy days.

@MeanBee392

2 жыл бұрын

Thanks for sharing your results and experience using this product. I think that is the problem and mine way way to diluted. I think if they made this more of a concentrated product it would preform a lot better.

I've used this soap in a bucket and a hose attachment foam gun and the results are pretty good. It beads up for maybe a week and a half but there is still a slight bit of protection. I work in quarters and don't have any problems with streaking.

@MeanBee392

2 жыл бұрын

Thanks for sharing your results with this product. Sound like you are getting good results and it's working great for you. Thanks for watching and commenting!

Hey buddy, thanks for the review. I think some more testing should be done on that product. Little disappointed in the outcome. Thanks for the video and your time. Hope all is well with you and your family. Take care my friend

@MeanBee392

3 жыл бұрын

You're welcome buddy! I agree and I personally think that this product needs to be more heavily concentrated to preform as they mention on the bottle. I was also very disappointed especially when the panels went flat after the contact wash. You're welcome and we are all doing well and I hope that you and your family are doing well too! Will do and you also take care friend!

Thanks for what appeared to be a good honest review of the Armor All soap

@MeanBee392

3 жыл бұрын

You're very welcome! I always give honest reviews but if it is a product that I don't like I normally will not post it because like this video it draws a lot of negativity. Thanks for your support!

This shampoo is beyond amazing it’s my new favorite. I use it on my cars my parents and brothers . Can’t see myself using anything else and for the price can’t beat it

@MeanBee392

2 жыл бұрын

Nice nothing wrong with that at all. When you find a product that works great for you there is no since in changing.

4K resolution is amazing. Probably won’t use this product, but, thanks for the introduction.

@MeanBee392

3 жыл бұрын

Thanks buddy and I am glad to hear that the 4K is looking amazing! Yeah I wouldn't recommend using this product but it was an interesting review video to make. Thanks for watching and commenting!

@jimplue3213

3 жыл бұрын

I have used this and I got great results from it , I recommended it to a couple friends

Great Video, Thanks for the research, and thanks to all the commentators as well, I think Dee Jay is on to something regarding the 2oz per gallon Mix, as well as Lexist2112 in regards to starting with the bucket wash first, and finishing with the foam cannon

@MeanBee392

3 жыл бұрын

Thanks! I would agree that the mix ratio is off but it would be nice if the manufacture would state their recommended mix ratio on the instructions. It would work a lot better doing the bucket wash first and ending with the foam canon but I also mentioned that at the end of the video.

Pretty much how I thought it would behave despite what the company claims. Appreciate the honest review meanbee. 👍👍

@MeanBee392

3 жыл бұрын

Not going to lie I was hoping for a bit more than what it delivered but that's what these reviews are for. You're welcome and I always give my 100% honest review. Thanks for your support buddy! 👍

@robind.5542

2 жыл бұрын

Just a few pointers on how you are actually supposed to use this product, whether it be Meguiars, or any other Ceramic wash product. First you need to Clay Bar your entire car. Then you can use a product like Meguiars Ultimate Polish with a Dual action sander and then the same thing with Meguiars Ultimate Polish. Then you use the Ceramic wash to wash your vehicle and then rinse it. On my vehicle, I used Meguiars Ceramic Wash and then after that was cured, I rewashed my vehicle and Used Nexgen Ceramic Coating to finish it off. When I wash my car now, the water just falls off of all the surfaces. The bottom line, if you are not willing to do the work to do it right, you shouldn't bother using any ceramic product. Because you won't get the proper results without expending a little elbow grease. This test was not what I would have done to show how it works. This was a LAZY mans test!

Like always great review, great video

@MeanBee392

3 жыл бұрын

Thanks brother!

I love this product looks great on my new truck and our semi new car. Are used it on my mothers car hadn’t been washed in over a year I had to wash it twice before the coding actually took after the first car wash the water really didn’t beat up I washed it again it looks like a new car the paint felt like glass.

@MeanBee392

3 жыл бұрын

That's awesome to hear that it works well for you and you like using it. We all have different experiences with products and this one just fell short for me. Thanks for watching and commenting and sharing your experience with this product.

Thank you for pointing out that the initial snow foam should be rinsed off and not used for the contact wash. I see videos of people spraying on snow foam and then doing the contact wash and that drives me crazy. Very detailed video. You've got a new subscriber.

@MeanBee392

2 жыл бұрын

Thanks for you're support I really appreciate it and welcome to the MeanBee family! So many people think you need to just foam then do the contact wash and I just cringe for the paints sake. I guess a lot of people don't mind having swirled paint and don't understand the time and effort that goes into a paint correction. Thanks again for your support buddy!

@NickVetter

2 жыл бұрын

I dont see what's wrong with it?

Thank you for an honest review.

@MeanBee392

3 жыл бұрын

You're welcome and glad you enjoyed the video!

Interesting video man!!! Very odd how it's hydrophobics are good when foaming and rinsing.. great video man!

@MeanBee392

3 жыл бұрын

Thanks brother!!! I know it, it was very strange and kinda made me dive down the rabbit hole a bit lol. Thanks brother I appreciate it!

I wash my car with buckets and MIT after a good pressure wash rinse and it seems to do pretty good.

@MeanBee392

2 жыл бұрын

Nice and thanks for sharing your experience with this product.

Subscribing because you’re very thorough, honest, and genius for coming up with this test lol can you do chemical guys hydro suds

@MeanBee392

3 жыл бұрын

Thank you very much and I appreciate the support and kind words! Thanks for a recommendation on a video you would like to see but I don't have that product from Chemical Guys but let me see what I can do. Thanks for your support on the channel!

Great review brother this is what I'll use to wash my k5 gt when I first buy it

@MeanBee392

2 жыл бұрын

Thanks brother! O that's going to be a fun ride!

very through testing. I have gotten mixed results on my black vette. Nemonics racing is correct DO NOT let it dry on the paint it leaves stains. And yes MeanBee is right, if you use more than the recommended amount you do et better performance but, as for me, I am moving on to another product. Thank you for confirming the performance or lack of from this product.

Know this video is a bit old but I still use this product and it is amazing I do a Norma hand wash with megs gold class for that lubricity. Then foam down the car with the ceramic wash then pressure wash after a minute. The protection lasts about 2 weeks and leaves noticeable protection on cars with bare paint pretty fantastic product when used like a spray on sealant. Very similar results if you just put the soap diluted in a spray bottle and rinse panel by panel.

Hey buddy, would love to see you review some of the AENSO soaps (and other AENSO products). I have heard they are very good. They have two soaps I believe, a PH shampoo for the paint, and then a snow foam soap. Another soap brand I'd love to hear your feedback on is FEYNLAB "PURE", and FEYNLAB "Pure Rinseless". I've heard both of those have more "bite" to them compared to other soaps but also rinse free and clean without any film left behind. The FEYNLAB soaps are supposedly very "top shelf" so to speak but reasonably priced for the quality of the soaps. I'm a big fan of rinseless washes so curious to see how the FEYNLAB compares to something like McKee's N914 which is also a great rinseless with nothing added such as gloss enhancers, wax, or Si02, etc. Just simple (very effective) shampoos.

@MeanBee392

3 жыл бұрын

Hey buddy! I have heard of AENSO but never really looked into their products. I have never heard of FEYNLAB but I will definitely be checking out both of them! I really like the sounds of all three of the products that you have mentioned and you have really gotten my curiosity about them! The FEYNLAB is one that does sound very interesting to me and I just quickly looked at them on line and I am thinking that I am going to need to pick some up. They sound like a really good product and a "top shelf" one's at that like you mentioned. I need to get more into rinseless washes so maybe this will be one that I will have to try out! I want to thank you very much for the recommendations and it means a lot to me and hearing you say that you would like to see me try them out because that must mean that you are liking the content. What is your "go to" rinseless wash that you use I am just curious. I know that Lithium Auto Elixirs has a car shampoo called Double Tap and it's another soap that is just a good true traditional soap with out any added gloss enhancers or Si02 properties that cleans great and rinses clean as well. Once again thank you for your support on the channel and recommendations that I will be looking more into! Thank you for your time watching and commenting buddy!

I actually wash my car with chemical guys products and use the armor all when I’m done just for the ceramic protection. And I only use it with the foam cannon no wash mit the foam cannon is already a agitator. Haven’t washed my car in a month and it still works great. Holding up to the Florida weather and sun.

@MeanBee392

3 жыл бұрын

Thanks for sharing and personally using this product like you mentioned is the best way to use it!

And now in 4k📷👌👍🎊🎉

@MeanBee392

3 жыл бұрын

Yes sir! How do you like the higher video quality? 👍

@1stfrompuertorico568

3 жыл бұрын

@@MeanBee392 👌👍

@MeanBee392

3 жыл бұрын

🤝👍

30:00 "wash it off" LOL, even made me laugh, you're humorous

@MeanBee392

2 жыл бұрын

LOL!

Trying to find out what kind of shape is your driveway after all this ceramic stuff. Is your driveway slick/slippery? Does water bead on your driveway? Just curious.

@MeanBee392

2 жыл бұрын

After this product it did not change. Not any slickness to it or water beading but that is a good question.

I used the product it worked well one issue i had was when bugs were splattered on my windshield i used windex and 3 or 4 other windshield cleaners it would just smear. had a hard time cleaning it.

@MeanBee392

2 жыл бұрын

Thanks for sharing your experience with this product! Have you tried using a dictated bug cleaner? They can be very hard to remove and bug removers will just make you life cleaning so much easier. Thanks for watching and commenting!

Hey man, the problem with the bucket wash was the mixture ratio... think about how much product was in the cannon vs pail.

@MeanBee392

3 жыл бұрын

I did mention that at the end of the video in my final thoughts. I think the recommend to much product for the foam canon and not enough for the wash bucket. I think if Armor All would state how much water to use per 2 oz of product in the wash bucket I would of gotten better results. The wash bucket was way to diluted and I think 8 to 10 oz would of worked way better. Thanks for watching and commenting!

So I decided to buy this, I used more than said on the instructions, it didn't even say how much water to add the 2oz too so I did 4oz with 2.5 gallons of water, and it beaded fine with a hand wash, however when I was drying it off I noticed there was a lot of dirt on the towel .. it really didn't clean well, I absolutely agree with you on that period, there was a very light film left on the car after the wash which was uncommon. I've always used Chemical Guys Citrus wash and gloss, never had a problem with any film, a very noticeable film was left though and I washed the car exactly how I would with my normal soap. After I dried it off I decided to go over the car with a detailer spray and they helped some, kinda wouldn't recommend this either, as a soap it just doesn't clean well, and if I have to go over the car with detailer spray after washing it than there really isn't much point to the beading either as the detailer can do that all on it's own. I was a little disappointing in all honest, it beads it just doesn't clean, maybe next time I'll add 2oz to my normal shampoo and see if that helps with the beading.

@MeanBee392

3 жыл бұрын

Thanks for sharing your experience using this product! It has very very mild cleaning ability. I wish they would put on the bottle how many ounces to use per gallon of water but you used double of what I did and still had very little cleaning power. That is very true about there being no point to using a car wash if you have to go right behind it and use a detail spray because at that point it doesn't matter if the car wash makes the surface hydrophobic. Every one has been bashing me on this product for not liking it but as you and I both know it really is nothing to brag about. I would also be curious what your results would be adding this to your regular car shampoo and if it would make a difference. A good car shampoo might just kill this product too lol. Thanks for your time watching and commenting!

@GainingDespair

3 жыл бұрын

@@MeanBee392 Yeah, that's kinda what I was thinking citrus wash and gloss isn't really harsh but at one point it was known for its stripping ability so I'm not certain if adding it to the soap would really result in anything. It just doesn't make a ton of sense for the price, better soaps for cheaper, citrus wash and gloss is $22 for a gallon and 2oz works fine for 2.5 gallons. I was really only interested in this as a maintenance wash and maybe a slight booster for the coating on my truck, just doesn't clean well, they might as well remove the soap and sell it as a detailer spray.

@MeanBee392

3 жыл бұрын

Yeah the Citrus Wash does have a lot of cleaning power and I think would make the Armor All look like water. But its always fun to experiment just to see what stuff like that would do. Hahaha that is a great way to put it and I don't even know about it being a detail spray because it is so low on lubricity. I just think they need to go back to the drawing board and make a more concentrated version to make it preform like they say. That is true there is a lot of other car washes out there that will out preform this one and can be used as a maintenance wash for a coating's for right around the same price.

I wish I would have watched this video before purchasing. It’s definitely foamy with the foam cannon. Contact wash seems like I’m literally washing with water only. It does what it claims, it gives you a slight si02 protection. Just needs a bit more lubricity. Thanks for the video!

@MeanBee392

5 ай бұрын

That was my big complaint with this product is there is almost 0 lubricity with it and for me that is a down fall. Thanks for sharing your experience using this product. You're welcome and thanks for your support.

Perfect review. I used this in my foam cannon last week and wasn't impressed. I have a black Ceramic Coated SUV with PPF rocker panels. Is there a better foam cannon soap you recommend?

@MeanBee392

Жыл бұрын

Thank you and glad you enjoyed the review! Some of my personal favorite's are Koch Chemie Gentle Snow Foam, Adams Polishes Car Shampoo, Adams Polishes Mega Foam, Gtechniq Gwash, and Lithium Auto Elixirs Double Tap just to name a few. Hopefully that will give you some recommendations and you will find one you like. Thanks for watching and commenting!

@chrisginoc

Жыл бұрын

@@MeanBee392 I just finished ordering the mega foam online due to the amazing reviews. Is there a such thing as a foam cannon soap that has ceramic coat in it or is that just bs people try and sell you like chemical guys hydro sudz crap?

@MeanBee392

Жыл бұрын

Nice! You will have to let me know what you think of it! There is ceramic car soaps that do work good and ones that are really bad but if a soap has ceramic in it the property's of the ceramic really hinder the foaming characteristics of the soap. If you want a good ceramic soap I would check out Koch Chemie Nano Magic Shampoo. I will link it for you on The Rag Company's web site. You can also try my code to save some money if it is still active at The Rag Company (MEANBEE15) Hopefully all that info helps. theragcompany.com/collections/koch-chemie/products/koch-chemie-nanomagic-shampoo

Didn't work well for me either, I wash and detail my truck myself and decided to try this product and now I'm looking to do a paint correction.. I wash my truck section by section in a shaded area and completely towel dried the truck without letting the water dry and it left tons of marks that I can't get out

@MeanBee392

2 жыл бұрын

I have been hearing this a lot and I hate it. I have heard that the only way to get those spots off is to polish them out and what a pain just because of something that should be a simple process. Thanks for commenting your experience using this product. If you have any question on how to get the spots out or anything feel free to ask. Thanks for watching and commenting!

I think I like the meguiars ceramic better. But for a simple, 1 liquid, any mitt/sponge wash soap, the armor all ceramic is pretty darn good. Now I use the armor all on my foam gun and meguiars in my bucket

@MeanBee392

3 жыл бұрын

Thanks for sharing! I think using it like you mentioned in the foam gun and Megs in the bucket would work very well. Thanks for watching and commenting!

After a year of using: I love this stuff. I never really wax my car (lazy) but I wash it. Pre rinse/wash then this stuff is great in a Foam cannon with a section by section contact wash and rinse... blow dry when finished! (Never use it in a bucket waste of time and labor!) After a Foam cannon section wash and rinse it Beads water everywhere even the windshield and rims. The beading effect last for weeks! ** Always rinse and NEVER let the Soap dry or your in trouble!

@MeanBee392

Жыл бұрын

Thanks for sharing your experience with using this soap. I can see using your method of using this product achieving some great results. I also agree that using it in a bucket is a waste of time and the beading out of a bucket really is not that good. But when foaming this product it does leave a nice hydrophobic layer on the paint with great beading. Once again thanks for your time sharing your experience with this product.

appreciate the review bro... :-)

@MeanBee392

2 жыл бұрын

Thanks and glad to hear that you enjoyed it!

Only downside I experienced was some spot and drip marks on windshield that took considerable effort to remove. Truck body looked great though.

@MeanBee392

2 жыл бұрын

That is what I have been hearing for a lot of people having that problem. Thanks for sharing your results with this product!

UPDATE: Armor All got back to me. You are supposed to use 2 oz per gallon. This may make a difference and I will try the correct amount on my truck later this week. Cheers!

@MeanBee392

3 жыл бұрын

Thanks for the update! That makes a lot mot sense and definitely let me know how that works out using the product the way they should of stated on the bottle. Cheers!

I used foam cannon and then scrubbed with my wash mitt. Rinsed off and the beading is unreal. Worked great for me.

@MeanBee392

2 жыл бұрын

Glad to hear that it worked good for you! We all have different results and unfortunately this one did not work for me. Thanks for watching and commenting!

I just cant get behind any armorall products this video proves once again

@MeanBee392

2 жыл бұрын

i know what you mean.

Can you mix it with other foam ? It works very well

@MeanBee392

3 жыл бұрын

I don't really see any reason you cant mix it with other foam other than it might not make it preform very well. But it is always fun doing testing like that.

New to ceramic coatings. My truck is ceramic coated with pro grade coating. Can I use this soap without issues? Thanks.

@MeanBee392

2 жыл бұрын

You would probably be able too but I am not a fan of this soap. I would check out CarPro Reload and also Koch Chemmie Gentle Snow Foam as well as their Nano Magic Shampoo. Those are my top soaps I like using on coated cars. You can find the Koch Chemmie product over at The Rag Company and you can use my code MEANBEE15 to save some money on an order if you would like. 👍

You may already have a video on it but can you give your recommendation for your top product that you would use that is supposed to be like this. I’m new to washing my car on a regular basis I would love a great product to use.

@MeanBee392

2 жыл бұрын

For me I really like the Turtle Wax Hybrid Solutions Ceramic Wash and Wax. I am going to be trying Koch-Chemie Nano Magic Shampoo soon so keep and eye out for that video as well. Hopefully that helps and thanks for watching and commenting!

@wisetow10

2 жыл бұрын

@@MeanBee392 yes. A ton. Glad you said that. I’m thinking I just want to start using turtle wax and be done. Too many options and that seems to be one of the agreed favorites. I’ll for sure be looking out. Thanks again.

@MeanBee392

2 жыл бұрын

That's great to hear! There is a lot of options and almost too many. I do have a video on the Turtle Wax Ceramic Wash & Wax if you want to check it out but you can't go wrong with it. You're very welcome and thanks for watching and commenting!

I wonder if you can use this as a rinseless method since it has very little suds.

@MeanBee392

Жыл бұрын

I wouldn't recommend it because the lubricity of this product is very low and could cause some light scratching to your paint.

I am asking. Why not bucket wash the truck first with a soap you trust and then use the foam cannon and apply the Armor All product and then rinse it off with clean water. Would that not give you the best results?

@MeanBee392

3 жыл бұрын

I did mention doing it like that at the end of the video and I think this would be a great product for a foam on rinse off after a wash for some paint protection.

@rogervillanueva8991

3 жыл бұрын

Exactly my thoughts. You can use this product as a protection layer after a basic wash. 👍🏽

Ok...wouldnt you want a prewash BEFORE this? I certainly would not want to encapsulate the dirt into the paint before I even get it off with a product that "water beads." I find this type of stuff holds the dirt more. Just a thought. The dirt was still there. If it softened the dirt, it would make even a small layer come off. Nothing happened except a small amount of water beading. Am I missing something? Maybe I am confused. I always prewash and pressure wash off most of the road grime before I even think about touching my vehicle with a car soap contact wash. As a result I have almost no swirls in my paint and I own a 2017. The point in softening the dirt is to remove most of it with a pressure washer. At least that is how I interpret it. Dirt acts like sandpaper...even at the smallest, softened grain of dust. That is why a prewash, in my opinion, should be first. Then, a contact wash. Is this product more of a contact wash type of product? Another thought.. If you do a prewash afterwards, it will flatten and get rid of the "water beading" technology because prewashes have higher ph properties than regular car soap. That is why car soaps really do not remove road grime without a contact wash. They cant. Ph neutral simply cannot make the ph of the dirt reverse. Therefore, it doesnt lossen it nor does it soften it. Thats why a pressure washer with just water doesnt remove stuck on road grime either. It is simply like trying to prewash with water. It doesnt remove grime. As far as lubrisity is concerned, all it does is make the fine dust glide more all around the paint. That is why I personally prewash first. I want as little of the fine sandpaper off my paint so my paint stays as swirl free as I can possibly make it over the long term.

@MeanBee392

3 жыл бұрын

A prewash is always a great Idea but I was doing this review based on the instructions and claims on the bottle. This product doesn't have enough property's to "set" the dirt to the panel and or bond them to the paint. As I mentioned in this video the cleaning properties "strength" really are not that good so that's why you did not see much dirt rinse off the panel. It sounds like you have a very good method for washing your car and it is working very well! That is the idea of a prewash is to remove that top layer of dirt and grime to make for a safer contact wash but you will not find a prewash soap that is going to remove even 90% of that dirt and grime. A prewash soap is designed for that top layer. Any kind of dirt or dust like you mentioned will cause some sort of damage to paint during a contact wash but if you are washing outdoors you will always have very fine dirt even if you do a prewash or not. When the paint is wet like after a prewash rinse it becomes a HUGE magnet to small dirt particles and dust when outdoors. That is true to an extent regarding prewash soaps but not all are higher PH soaps. I have several prewash soaps that are PH neutral. A higher PH will cut dirt and grime down quicker than a PH neutral soap but same goes with if you have some sort of paint protection on cutting it down as well. Some of the PH neutral prewash soaps that I use will work just as effectively but will require a longer dwell time. The PH of a soap is not making the dirt reverse when in fact it's cleaning "cutting power" is just much stronger to break it down. With the lubricity part that is a VERY important part of any product that you are going to be using on your paint. Why do you think a waterless or a rinseless wash product is MUCH higher in lubricity than just a car soap? Simply to help encapsulate the dirt and not let it bit into the paint. That is basically like saying you do not want to use a lubricant for a clay bar because it will just push contaminates around and not pick them up so just use the clay bar dry because it will be more effective. I do appreciate you sharing your thoughts but in the end this product just really fell short of a prewash or even a contact wash car soap. I think that if it was much more of a concentrated product you would see it preform a lot better but unfortunately that is not the case. I am just curious what is your favorite "go to" prewash soap and contact wash soap that you are using on your vehicle? I always like to ask to see if it's maybe a product that I haven't used that way I can try different ones out that people like and have good luck with so I can try them out as well. I do want to thank you for taking you time and watching and commenting I appreciate the support.

@Samuelfish2k

3 жыл бұрын

I’m a professional detailer, and Opera makes valid points. MeanBee, I must say I disagree with your overall view of things. There’s so much to point out on both sides, and I’m not about to take an hour or so that it would take to break it all down.. But I couldn’t walk away from this thread without saying something.

@MeanBee392

3 жыл бұрын

@Samuelfish To bad it would take you an hour to type something out because I would love to hear what you have to say. But go ahead and walk away lol.

Just a few pointers on how you are actually supposed to use this product, whether it be Meguiars, or any other Ceramic wash product. First you need to Clay Bar your entire car. Then you can use a product like Meguiars Ultimate Polish with a Dual action sander and then the same thing with Meguiars Ultimate Polish. Then you use the Ceramic wash to wash your vehicle and then rinse it. On my vehicle, I used Meguiars Ceramic Wash and then after that was cured, I rewashed my vehicle and Used Nexgen Ceramic Coating to finish it off. When I wash my car now, the water just falls off of all the surfaces. The bottom line, if you are not willing to do the work to do it right, you shouldn't bother using any ceramic product. Because you won't get the proper results without expending a little elbow grease.

@MeanBee392

2 жыл бұрын

That is the correct way if you want the protection to bond properly and you will achieve results like you mentioned. I was just making a review for how most people are going to use this soap. Thanks for sharing that info, watching and commenting!

Subscribed!

@MeanBee392

2 жыл бұрын

Thank you I appreciate the support!

What is your absolute favorite wash, regardless of price. I’m looking for something premium

@MeanBee392

2 жыл бұрын

Sorry for the delayed reply. My absolute favorite wash is CarPro Reset and Lithium Auto Elixirs Double Tap.

Have seen a lot of reviewers speak highly of this ceramic wash. Appreciate your balanced review. Have Hydrosuds and the Simoniz platinum ceramic wash and not sure about how much they actually add as far as protectant onto an untreated car. Feel that these ceramic washes are more beneficial as a boost for vehicles that already have a ceramic coating or wax already applied as a base.

@MeanBee392

3 жыл бұрын

I have also seen reviews of this product that others were raving about so I had to give it a shot. You are correct these types of car washes are best for use on paint that already has some sort of paint protection to help boost that protective layer. But they should also still bond to a panel without any paint protection and show some signs of the Si02 property's in it. There are some good car washes that are ceramic infused that do work very well but unfortunately this was not one that I have used. I am glad to hear that you did enjoy the review and I appreciate your time watching and commenting!

As you know, most if not all "ceramic" wash doesn't foam at all.. cmx wash and coat doesn't foam like AA.. I've tried both. AA in my opinion does a decent job considering the price. 6 oz. in a 5 gal. bucket works well.

@MeanBee392

3 жыл бұрын

That is very true and they don't foam well at all that's why I was very surprised with this one out of the foam canon! I also agree and think it was way too diluted in the wash bucket but I just wish the manufacture would state how much water to use per 2 oz of product with water. I honestly think you could use 2 to 4 oz in a foam canon and 8 oz in the wash bucket and it would perform a lot better. Thanks for watching and commenting!

@valiant7357

3 жыл бұрын

Yeah the mothers is Horrible.

So your theory is that beading is a result of foaming, and that washing removes the beading. It's quite simple to prove this. Foam after you wash to see if you get the beading again.

@MeanBee392

3 жыл бұрын

I think it did that because it was way more concentrated in the foam cannon than in the wash bucket. But that would be a good way to test it.

I wonder if this is a good product for a afterwash since it looks like it works great beading.

@MeanBee392

3 жыл бұрын

Using this product as an afterwash would work really good I think personally! I also think it would work a lot better if you used 8 to 10 oz in a wash bucket instead of the 2 oz that they call for. Thanks for your time time watching and commenting buddy!

@NemonicsRacing

3 жыл бұрын

I wouldn't g, I've seen what this does when allowed to dry on a car. I detail & specialize in ceramic coating. Since It's ceramic, ceramic bonding without being leveled or buffed off & allowed to dry, becomes permanent until paint correction is done. (I'm posting this next part in the main comments too) My friends son washed her car & left it soapy, the stains in the paint and on the glass did not come off, or get lighter... even after the 3rd wash. I ended up doing a full paint correction, (cut/buff + polish) & then Ceramic Coated the car bumper to bumper. The stains only went away during the cutting stage. There are other products that offer equal hydrophobic properties with less risk to paint damage. Nice Ek btw👌, (I have a built, sleeved & boosted Em1)

@timbruner4628

2 жыл бұрын

@@MeanBee392 I agree with your idea at the end of the video for using it as an afterwash from the foam cannon, and then rinse & dry. I think the vague bucket-wash dilution ratio on the product label should be re-worded to be 2oz per gallon. That would result in the 8-10oz that you suggest if you use 4-5 gallons of water. Maybe a retest of the bucket wash at 2oz product per gallon is in order?

Ceramic is just the newest word or craze added to a pre’existing product. Remember UV glasses or KETO diet following up with products now etc...Ceramic is just a word now. I was an employee at 5Point Auto in which we specialized in the application of Ceramic Coating which was a long process with a paint correction plus several layers of Ceramic going into the next day. Point is “Ceramic” is just the newest word being used to make sales💸

@MeanBee392

3 жыл бұрын

I agree with you 100% the problem is the average consumer doesn't know the difference like you or me. Just like people thinking a ceramic spray coating is a ceramic coating, it's not because a ceramic coating is a process and a long one at that that will last for year's if taken care of properly. Thanks for your support and time watching and commenting!

Hi. May be you have to foamed and hand contact then rinse. Just a thought

@MeanBee392

3 жыл бұрын

That is one way but I don't like doing that because you need a clean wash mitt for each panel. I think it was because it was so concentrated in the foam canon is why it worked better. I think if you would add at least 8 oz to the wash bucket it would deliver better results.

I just started using this product, been very pleased with it, it has enhanced my vehicles already ceramic coated. The similar Maguire's product was a fail and I tried both.

@MeanBee392

3 жыл бұрын

Thanks for sharing your experience with this product. Like I mentioned we all will have different results with products but when you find a product that works good for you it makes for an enjoyable time detailing your vehicle. I am just curious how much of this product do you use in your bucket and with how much water. I think mine was way to diluted and that's why I had the problems that I had but I was using what they called for. Thanks for your time watching and commenting!

@MeanBee392

3 жыл бұрын

@Eddie V's Mobile Detailing Thanks for sharing that because I have not used that product and could not speak for it. But as I am seeing on this video it is really hard for people to read the label and use a product as recommended.

@MeanBee392

3 жыл бұрын

@Eddie V's Express Mobile Detailing You're welcome buddy! They are about as clear as mud. I think lowering the ratios in the foam canon and upping them in the wash bucket would give a lot better results.

Hello, great video. I too am not too impressed with this product. I used this product on two vehicles that I own. I applied this product with a foam cannon and then thoroughly rinsed both vehicles with my pressure washer as per the instructions on the container. After the final rinse, I noticed how well the water beaded on the vehicle surfaces and was quite impressed on the beading properties. I had to quickly take care of a personal matter and was unable to hand dry the vehicles. When I returned, both vehicles were heavily covered in what appeared to be water spots. So I re-washed both vehicles and hand dried them, but the water spots remained from the first wash. After trying several different auto care products to remove the spots, I found only polishing compound would remove the spots from the vehicle painted surfaces, heavy duty trim cleaner for all the plastic surfaces and glass polishing compound for the windows. I spent two days cleaning and detailing both vehicles to remove all the water spots and re-polish all the surfaces. My only conclusion is that the properties of this particular ArmorAll ceramic car wash, also encapsulated the water beads and water spots left during the drying process. I'm hesitant to use this product again because of this issue, unless I can quickly hand dry the vehicle before spotting can occur. I would like to see ArmorAll change the chemistry of the product to resolve this issue or change the usage instructions to include that the vehicle must be hand dried immediately after the final rinse, otherwise heavy water spotting will occur.

@MeanBee392

3 жыл бұрын

Thanks for sharing! I have heard a lot of people having this problem and it is sad to hear because a car wash should not cause these types of problems. I think that this car wash is causing problems like this because the product is not completely rinsing clean off the panels and the SiO2 property's are staying in the water beading and when dried it is causing high spots like when you are applying a true ceramic coating. Rather that is true or not that is just what makes sense to me. Thanks again for sharing, watching and commenting!

@JimSpence

3 жыл бұрын

I had the EXACT same thing happen with water spotting and spotting stains on plastic trim when using this product. One vehicle (Tesla) I hand dried and it looked nice. Second vehicle I air dried (F150) and spotting like mini polkadots. And it is A PAIN to remove them. This crap soap is going in the trash.

@danlatu209

3 жыл бұрын

Same experience with the ceramic window cleaner. You have to dry it completely or the spots will not go away.

@maosotero

Жыл бұрын

It is also a problem for me, I did hand dried when applied, but since then in every rain the water spots appear if I do not hand dry any water remaining from the rain

Just a thought. Here’s a new technique 1) wash car as you normally do with full contact wash and rich-lubricity soap. Rinse with water 2) foam cannon with the siO2 wash and rinse with water 3) dry car off 4) enjoy

@MeanBee392

3 жыл бұрын

That is what I mentioned would be the best thing to do at the end of the video. But you are correct and that's the only way I really see this product preforming like they state on the bottle. Thanks for watching and commenting!

@SirIronJim

3 жыл бұрын

@LexisT2112 - I was thinking the same thing since the Foam Cannon appears to do very well

Just washed my 2018 Camaro used a foam cannon then a contact wash great beading

@MeanBee392

2 жыл бұрын

Nice! Thanks for sharing how it worked for you.

I use this all the time personally, and it beads EXACTLY the same nonmatter if you use the foam cannon or hand wash, it's great stuff. I don't know what you did, but that is NOT an unbiased review.

@MeanBee392

3 жыл бұрын

Sorry you think this is not an unbiased review but it is 100% and just using a product how a company states to use their product. How much product do you put in your wash bucket and with how much water?

Rinse off all the grime/dirt you can with just water. Then wash your car with Dawn. Then foam your car down with this and rinse without scrubbing.

@MeanBee392

2 жыл бұрын

Thanks for sharing a method. I wouldn't ever use Dawn as a car wash soap though.

Thanks MB. Armor All, living up to their reputation. Thanks for the great overview .

@MeanBee392

3 жыл бұрын

You're welcome buddy! Yeah... I was hoping for more but it just couldn't live up to their claims. You're very welcome and I am glad to hear that you enjoyed the video! Thanks for all your support buddy!

I only used mines in a bucket wash and it worked every time but i wanna think when you lay protection down in a foam cannon, rinse and then wash the car, you prob just washin away the protection from before since it wasnt bonded to the paint since you didn't agitated it but instead it was bonded to bonded surface dirt that would require agitation to remove...which you did remove during the wash process. Science is difficult, you would think you have double protection but not. So actually it was never bonded to the paint. for me in a bucket wash alone, it last about 6 weeks of protection

@MeanBee392

3 жыл бұрын

Thanks for sharing your experience with this product. For me it did not work as they claim on the bottle and their vague instructions. I think if this product was a heaver concentration to would work better that's why you saw better results out of the foam canon because it is laying it on thick compared to the wash bucket. My question for you is do you use 2 oz in your wash bucket? If so how much water do you use?

@Dee--Jay

3 жыл бұрын

@@MeanBee392 in a bucket wash I only use one gallon of water every wash and I put 2 oz of this soap. In the directions, it didn't say per gallon, it just said 2 oz per bucket of water. How much is a bucket? So because I always use 1 gallon of water, I just use 2 oz per 1 gallon of water. I still think when you laid down the foam, the ceramic technology was bonded to the bonded contaminants. When you came right behind it with a wash, you just washed it away with the agitation by removing the dirt... so try it without using the foam cannon in a regular bucket wash and I promise you it will work

@MeanBee392

3 жыл бұрын

That makes sense because you are using it less diluted than I did with only one gallon of water. That is also what I think happened is that it was very concentrated foaming it on then very diluted washing out of the bucket and washing it off. I was just going per their directions for their product but as we saw that did not work. I think 8 oz or more in a 2.5 gallon bucket would do the trick. I was just making a review of how they stated to use their product and not trying to bash the product. I just wish they would put more clearer of directions on their bottle. I will have to try it again to see. Thanks for your input and commenting back!

Directions clearly state to foam up and agitate. You could have followed the directions at least on the test panel. I know the truck was muddy but with a rinse down with the pressure washer and adequate lubrication from the foam cannon your not going to mare the paint. If your so worried about marring the paint why wouldn’t you just foam the car up again and then agitate? This is a great product for the price if you follow the directions!

@MeanBee392

2 жыл бұрын

I feel that the direction are not real clear and especially for someone that might just be getting into taking care of their car. Lubricity of this product is extremely lacking so just foaming then agitate the foam on the surface is going to mare the paint if it is real dirty. Personally this product needs some refining because a lot of people are having problems with it leaving spots on their paint as you could read in the comments. I am not trying to argue that this is a good or bad product because we all will have different results, but their are a lot better ceramic soaps out there that will beat this one by miles. I do appreciate you time watching and commenting though!

@r.bianco

2 жыл бұрын

@@MeanBee392 I have had really good experience personally with the product and for the price as well. And I worked in direct sunlight in Florida. Just have to foam up with the foam cannon and agitate. make sure to work quickly so it doesn’t dry and use a good washmitt. Beads up amazing. Definitely marketed as a maintenance product for someone who has experience detailing. Thanks for taking the time to respond.

@MeanBee392

2 жыл бұрын

That's good to hear that this product work very well for you and especially in direct sunlight in Florida. Your welcome I always try to respond to everyone because I appreciate the time people put in watching and commenting!

Road to 10k subs🐝

@MeanBee392

3 жыл бұрын

Yes sir! It’s getting closer by the day and it’s all because of you amazing people! Thanks for all your support brother! 🤜🤛👍

Sometimes you win, sometimes you don’t. Very good video!

@MeanBee392

3 жыл бұрын

Haha that's very true! This one defiantly was not a win but it was a very interesting review to make. Thanks buddy I appreciate it! 👍

Your wash mitt fibers could be the reason why this product is breaking down so much.

@MeanBee392

3 жыл бұрын

That could be the case.

I use it on my cars it works I think you added more water in the bucket 🪣

@MeanBee392

3 жыл бұрын

Thanks for sharing your experience with this product. I also think it was way to diluted but I wish they would recommend how much product to use with how much water. Thanks for your time watching and commenting!

I have used this as well and I'm not to impressed. I called the Armor All head office about the amount of product to use in a five gallon bucket because the 2 ounces in a bucket is to vague. It has been three weeks and I am still waiting for their Research and Development Team to get back to me. So far, the product and Corporate Office gets an "F"!

@MeanBee392

3 жыл бұрын

Yeah it really is not a good product and that is bad to hear that they haven't gotten back to you! 2 oz is very vague! Thanks for sharing and I appreciate your support on the channel!

Do you think ceramic car washes are worth getting?

@MeanBee392

2 жыл бұрын

They do have their place but I generally don't use them much. I like to go in with a topper after a wash for that added protection. That is a good question though. Thanks for watching and commenting!

All other videos show foam wash and hand wash while foam on and great beading

@MeanBee392

3 жыл бұрын

They do but I did not want to foam a 4 foot by 4 foot section at a time and do a contact wash. I was also curious on how it's cleaning capability's were so I wanted to show it being uses as kind of a prewash. I think if more of this product is used it will preform as Armor All states but I wanted to do a review of how they specifically state to use their product. Although the out come is not what a lot of people want to see and or don't like it is just an honest review. Thanks for your time watching and commenting!

does anybody know if this is available in europe?

@MeanBee392

3 жыл бұрын

I do not know for sure I will look and see if I can find out.

I used it on my truck though it worked great

@MeanBee392

3 жыл бұрын

Thanks for sharing buddy! How much product and water did you put in your wash bucket? I am just curious.

@jimplue3213

3 жыл бұрын

Same here

Wow great examination of this product! Thks! #RealWorldExample

@MeanBee392

3 жыл бұрын

Glad you liked it! Thanks for your support watching and commenting!

Is the PH of this product neutral?

@MeanBee392

3 жыл бұрын

This soap is PH neutral.

28:54 for final thoughts/verdict

@MeanBee392

2 жыл бұрын

Thanks!

It foams up pretty well in a foam cannon. I do not like the foaming technology handwashing .

@awgevl7340

3 жыл бұрын

Stop being lazy lol hand washing is the best

@MeanBee392

3 жыл бұрын

Why do you not like foaming technology when hand washing?

@redspain349

3 жыл бұрын

@@MeanBee392 it didn’t foam enough for me when I hand washed. I wish it had more foaming technology.

@MeanBee392

3 жыл бұрын

I agree!

I applied it diluted with a microfiber before I could rince it made a giant spider web on my windsheld. Its onthat side of body as well. I have ran it through car wash, for treatments woth their spray window cleaner nothing removes it.. I tried acholol on with sheild nope tried a name brand window cleaner nope im stuck with this smear web on half of my truck. Going to buff body with megiures cleaner wax But try non sudsey amomia on windshield I use a rv filter on my outdoor hose and have been doing this for years on black trucks I know how to detail My truck is white and black and you can see it on the white paint same spider web. If any one has a way to get this stuff off i would be thankful

@1234tellmewhatyourlookingfor

Жыл бұрын

What is ironic is I have used it before with out a Problem. In the short time you left it on your windsheild mine was already dry. That is why one side of windsheld is clear the part that dried will not come off

@1234tellmewhatyourlookingfor

Жыл бұрын

It has a surfractant in it. It makes water wetter When I bought my last bottle it was on sale with plenty of stock.

Instructions didn't mention the bucket wash method. Try washing first then rinse. Then foam and rinse off.

@MeanBee392

3 жыл бұрын

That is actually the first method they mention on the label. I think that would work but I also think using more product then they say in the wash bucket (around 8 oz) would also make it perform a bit better.

Your wash mitt bucket was too diluted, and the contact wash actually rubbed off the original layer of stuff on there. Remember, it’s only a microscopic layer.

@MeanBee392

3 жыл бұрын

It was too diluted but I was going off of the manufactures instructions but they did not state how much water to use... It is a very thin layer and you are correct it did get washed off.

@JustPeaceLoveAndKindness

3 жыл бұрын

Have you tried leaving a less diluted solution on there for longer period?

@MeanBee392

3 жыл бұрын

I have not but I have been thinking about making another video using ratios that make more since.

Dries faster than you can remove it .. my jeep gets waxed weekly so i cant attest to the beading of the carwash ... i"ll use it as a quick wash soap ... cant see myself using this as a stand alone soap and replacing the other soaps i use .. only 12$ at my local wally world so not a bad deal.

@MeanBee392

3 жыл бұрын

It does dry fast but I guess that's why they recommend only working in 4 foot sections. I think this product would work great for using it as you do though! I agree that using it as a stand alone product is not a good idea but for a topper in a maintenance wash it would be good. I am just curious how much of this product do you use in your wash bucket and with how much water. I think what they call for on the label is not enough and when I used it it made it to diluted. Thanks for sharing your experience with this product and watching and commenting!

@yomoms16

3 жыл бұрын

2 oz to just 1 gallon of water and i also used 2oz in my foam gun .... so that's 4oz total for the wash

@MeanBee392

3 жыл бұрын

That's not bad at all. I think only using one gallon of water for 2 oz would work a lot better than it did for me.

From your test. Wash wish mitt first then do foam wash

@MeanBee392

2 жыл бұрын

I would agree that would be the best option for getting some nice hydrophobic's out of this product.

I used 8oz in my foam Cannon and I got better results then you did . I used my pressure washer to spray my truck down then applied foam Cannon ,mitt washed , rinsed then foam Cannon again, then rinsed. My results came out better. Again 8oz of product and the rest water in my 32oz foam Cannon .

@MeanBee392

3 жыл бұрын

Thanks for sharing and I believe using a much more concentrated formula like that in the foam canon is the best idea to get better results. I was just wanting to use it per their instructions. Thanks for watching and commenting!

I'll stick with turtle wax spray and shine. Little more work but last.

@MeanBee392

2 жыл бұрын

I agree 💯 Thanks for your support!

I tried this on a charcoal color F150 and a red Tesla Model Y. Both hand washing. I had the exact results. Can’t say I like this product. You also have to dry right away. The water spotting left stains in the plastic trim on the Ford. I’m sure that’s from my experiential air dry but still. If you want a regular soap for routine washes this isn’t it. I’ll stick to old-school wash and wax. Really wanted to like this product. But the hand wash method frankly sucks and the 2oz “per bucket” which is DOES say ...how weird is that!?

@MeanBee392

3 жыл бұрын

Thanks for sharing your experience with this product. It is a very disappointing product and I have heard a lot of complaint about the spotting like you mentioned. I would agree that sticking to a wash and wax is way better and a safer option. Yeah 2 oz is very weird and frankly dumb lol. Thanks for your support!

Should be tested against meguiar's hybrid ceramic wash and wax ?! 👍 👍 👍

@MeanBee392

3 жыл бұрын

That is a great idea and I also was thinking the same thing. Have you tried out Meguiar’s Hybrid Ceramic Wash & Wax? If you have what do you think of it. Thanks for your time and support watching and commenting! 🤝👍

I don't trust people that don't rinse after foam, and just go straight to scrubbing 🤷‍♂️

@MeanBee392

3 жыл бұрын

I agree I always rinse after foaming.

acid ?

@MeanBee392

3 ай бұрын

It is not acid.

You don't want it to beat up. Piece of water act as Metro magnifying glasses and bacon dirt you want it the sheet off

@MeanBee392

2 жыл бұрын

That is very true!

there's no substitute for a two bucket wash and wax

@MeanBee392

3 жыл бұрын

That is very true buddy!

Things that make you go hmmmmm Strange product

@MeanBee392

3 жыл бұрын

Hahaha that's what I did say out loud when I did the contact wash and it went flat hmmm. It is a strange product and I think it needs to be more of a concentrated product to preform as they claim on the bottle.

IT's 2 oz per gallon

@MeanBee392

2 жыл бұрын

Thanks!

Prefer using griot's version instead

@MeanBee392

3 жыл бұрын

I would agree and that is a way better option! Thanks for your time watching and commenting!

@UNSC011001

3 жыл бұрын

@@MeanBee392 thanks for showing me how it compares👍👍

@MeanBee392

3 жыл бұрын

You're welcome buddy!

Wow, you got lots of time on your hands! Really...........

@MeanBee392

3 жыл бұрын

I sure do and it AMAZING!

Very weird situation. Very different results from other youtubers. I wonder if you had really hard water or if some dried on the paint since you were doing a video. I wish you would have added more soap and washed it a second time.

@MeanBee392

3 жыл бұрын

It was very weird. I have also seen other video of other KZreadrs having better luck with this product but the only thing that makes any sense to me is that they are using a lot more of the product than it calls for so in my situation it is very diluted and not preforming like it should. But that is what Armor All specifically calls for on the label is 2 oz in a wash bucket but they never stated how much water for that 2 oz though. I also was thinking the same thing and should of tried it with more product in the bucket but because of their instructions and not wanting to drag the video on to long I didn't do that. I appreciate your time watching and commenting!