Here we take a closer look at just how to install our new Diff Drop Kit to suit the current HiLux.
Жүктеу.....
Пікірлер: 55
@steve_ohhhhhhh Жыл бұрын
Very nice and much needed addition to the product line up team. It's on the list 👍🏻
@matthewstevens6605 Жыл бұрын
Would love to see you guys bring an Arm style diff drop for the 200 series to the market! So much better than spacer style!
@biorobot Жыл бұрын
Great work, nice to see!
@KAONaust
Жыл бұрын
Thanks Denis!
@Just_charston Жыл бұрын
Good Work mate Good luck on your next australian ninja warrior 😃
@davidhogan58805 ай бұрын
Awesome video
@tyroneclarke1666 Жыл бұрын
Well done with the video and explaining along the way👍. The inner L/H CV joint still looks to be on a severe angle at full lower travel. You would think that joint at that angle would fail under extreme load.
@tyrellmay9260
Жыл бұрын
It's at that angle cause it's on the hoist, once the weight is down they should level up abit
@maximusmeridius7255 Жыл бұрын
4th/5th gen 4runner?
@zyar46 Жыл бұрын
Hi Lay, should the car be hoisted or it can be done ehen the car is resting on the ground?
@NeyBar Жыл бұрын
Will you be making something like ths for the J120 Platform?
@acd3169 Жыл бұрын
Will this work on 5th gen US 4runner ?
@Outta_Tyme Жыл бұрын
Can you put the factory bash plates back on with a diff drop?
@austinhurd5224 Жыл бұрын
Will you be making these diff drop brackets for the hilux surf 3rd generation?
@Dumakude_deepHouse8 ай бұрын
Do you have a distributor in South Africa? I want them for my revo
@jschue11615 ай бұрын
Do you make this kit for a US 2012 Toyota tundra crewmax?
@stephenmulholland48685 ай бұрын
This is also a good time to change the diff oil
@ulehuleh Жыл бұрын
great video. Can you please confirm if the diff centre contacts the steering rack at all after being dropped? I have a kit at the moment where this is the case and i am looking to change it beacuse of that?
@KAONaust
Жыл бұрын
Thanks! Great question. Our does not contact the steering rack at all after being dropped, clearing both it and the cross member by about 10mm. We have seen other options on the market with claims for lower drops that do often result in vehicle components fouling.
@96MustangBoy1 Жыл бұрын
It would be nice of a kit was made for a 2003 Toyota Tundra SR5.
@ajmpatriot489911 ай бұрын
Is there any potential harm to the diff from doing this?
@jessemorgan7007 Жыл бұрын
Any chance this kit work on US 5th Gen 4 Runners? if not any plans on making a kit for US 5th Gen4 Runners?
@jfriday1ify
8 ай бұрын
It doesn't. I reached out to them directly for 4runner's, tacomas, Gx's and they got back to me about it stating that it wont fit.
@Yoman1971 Жыл бұрын
Is this kit compatible with a 2022 SR5 4Runner?
@mariomarquez5559
Ай бұрын
I think it would work since pretty much much is the same vehicle but im not sure. I was told their 2022 hilux kit wuld not work on a 2022 Tacoma
@DavidLee-bm1sw Жыл бұрын
Hey Lay, just a quick question. Why didn’t you guys over at KAON, engineer in the extra mounting point for the diff drop arm on the drivers side of the car, like they do with other brands like phat bars and psr etc? Is it just not needed? Or is the way the KAON ones are built higher in strength? Thanks
@KAONaust
Жыл бұрын
Hey David, great question. When designing the diff drop our philosophy was to retain as much of the Toyota design principles as possible, whilst still achieving the optimum drop required to correct CV angles. In our experience, the extra mount increases the potential for drivetrain vibrations by making one side in particular too rigid.
@trentattewell6109 Жыл бұрын
I don't suppose there'll be some kind of exchange or discount program for those of us already with the N80 underbody protection kit.
@KAONaust
Жыл бұрын
At this stage, a used-gear program is not really the kind of thing we're able to support operationally, but it would be a fantastic thing to be able to do in future. That said, if you have the full kit, the Trans guard wouldn't need to be swapped out. We've currently got a front and sump set to suit this Diff Drop in progress. Our best suggestion with the front and sump would be to try selling it on.
@DonsShed Жыл бұрын
Looks so good :) Do both the Stock Toyota Underbody Protection and also the Kaon Underbody Protection fit with this Kaon Diff Drop Kit?
@KAONaust
Жыл бұрын
Hi there! At this stage we can't confirm it's compatibility with the Factory Toyota sump guard, but it is unlikely. Our current N80 & Fortuner guards are going through a revision to be compatible, which we'll be adding soon. Our recently released N70 guards are compatible - just select the Diff Drop option. Hope that helps!
@DonsShed
Жыл бұрын
@@KAONaust It sure does thank you :) lucky I didn't buy any Underbody Guards as yet!!!.... looking forward to the revised Kaon ones and this Diff Drop Kit for my MY22 Fortuner!!! :)
@Mart25F
Жыл бұрын
Will this work with the fj cruiser and 4th gen 4runner? Front diff is pretty much the same
@ericwaite7850 Жыл бұрын
Wondering if this would work on a U.S. model 5 th gen 4Runner ?
@matthewmoser2090
Жыл бұрын
i agree i wonder
@jamiemagdeleyns9152
11 ай бұрын
Yes
@r35tmanbash Жыл бұрын
Great job. Does this fit other Toyota's like the FJC?
@KAONaust
Жыл бұрын
Afraid not, but we have other diff drops slated for development in 2023.
@lukestoyz
Жыл бұрын
Waiting for the us spec Fj Cruiser to purchase
@luisgutierrez310 Жыл бұрын
3rd gen 4runner? 😊
@mariomarquez5559Ай бұрын
Weird he put the grease on the new parts but he didn’t clean or put grease on the old bushings he reused
@TurkUlug Жыл бұрын
Hello where can i find diff drop for Hilux Vigo?
@KAONaust
Жыл бұрын
Hi there! It's out of stock at the moment, but you can signed up to be notified when it's back in stock here: www.kaon.com.au/diff-drop-kit-to-suit-toyota-hilux-n80-arm-style
@smashwindow01 Жыл бұрын
Anything coming for the Prado 150?
@KAONaust
Жыл бұрын
It's in very early development, we're optimistic we will have something out in 2023 for the 150, along with all new light-weight underbody guards to suit.
@smashwindow01
5 ай бұрын
Still working on these for the 150? You would sell these like hotcakes in the US for 4runners and Gx460s.@@KAONaust
@alejandrovertizaguirre18102 ай бұрын
What is this for?
@KAONaust
2 ай бұрын
That's a complex question! But in a nutshell, it lowers your diff, which after installing a lift can often be necessary for IFS vehicles to ensure correction of CV angles.
@randomuser6306 Жыл бұрын
Yeah the diffs are at am extreme angle.... When the truck is off the ground 😂😂😂
@ggbogo935
9 ай бұрын
it isn't a truck I wish people would stop calling them trucks
@BrianSmith-ws7gl Жыл бұрын
No international shipping 😢. Bummer
@KAONaust
Жыл бұрын
Hi Brian, that's not correct! We ship all over the world. If you go to our website there is a shipping calculator that should output the shipping cost to your location. If you're finding it's not working, please reach out to our team at info@kaon.com.au and they'll be able to help you out.
Пікірлер: 55
Very nice and much needed addition to the product line up team. It's on the list 👍🏻
Would love to see you guys bring an Arm style diff drop for the 200 series to the market! So much better than spacer style!
Great work, nice to see!
@KAONaust
Жыл бұрын
Thanks Denis!
Good Work mate Good luck on your next australian ninja warrior 😃
Awesome video
Well done with the video and explaining along the way👍. The inner L/H CV joint still looks to be on a severe angle at full lower travel. You would think that joint at that angle would fail under extreme load.
@tyrellmay9260
Жыл бұрын
It's at that angle cause it's on the hoist, once the weight is down they should level up abit
4th/5th gen 4runner?
Hi Lay, should the car be hoisted or it can be done ehen the car is resting on the ground?
Will you be making something like ths for the J120 Platform?
Will this work on 5th gen US 4runner ?
Can you put the factory bash plates back on with a diff drop?
Will you be making these diff drop brackets for the hilux surf 3rd generation?
Do you have a distributor in South Africa? I want them for my revo
Do you make this kit for a US 2012 Toyota tundra crewmax?
This is also a good time to change the diff oil
great video. Can you please confirm if the diff centre contacts the steering rack at all after being dropped? I have a kit at the moment where this is the case and i am looking to change it beacuse of that?
@KAONaust
Жыл бұрын
Thanks! Great question. Our does not contact the steering rack at all after being dropped, clearing both it and the cross member by about 10mm. We have seen other options on the market with claims for lower drops that do often result in vehicle components fouling.
It would be nice of a kit was made for a 2003 Toyota Tundra SR5.
Is there any potential harm to the diff from doing this?
Any chance this kit work on US 5th Gen 4 Runners? if not any plans on making a kit for US 5th Gen4 Runners?
@jfriday1ify
8 ай бұрын
It doesn't. I reached out to them directly for 4runner's, tacomas, Gx's and they got back to me about it stating that it wont fit.
Is this kit compatible with a 2022 SR5 4Runner?
@mariomarquez5559
Ай бұрын
I think it would work since pretty much much is the same vehicle but im not sure. I was told their 2022 hilux kit wuld not work on a 2022 Tacoma
Hey Lay, just a quick question. Why didn’t you guys over at KAON, engineer in the extra mounting point for the diff drop arm on the drivers side of the car, like they do with other brands like phat bars and psr etc? Is it just not needed? Or is the way the KAON ones are built higher in strength? Thanks
@KAONaust
Жыл бұрын
Hey David, great question. When designing the diff drop our philosophy was to retain as much of the Toyota design principles as possible, whilst still achieving the optimum drop required to correct CV angles. In our experience, the extra mount increases the potential for drivetrain vibrations by making one side in particular too rigid.
I don't suppose there'll be some kind of exchange or discount program for those of us already with the N80 underbody protection kit.
@KAONaust
Жыл бұрын
At this stage, a used-gear program is not really the kind of thing we're able to support operationally, but it would be a fantastic thing to be able to do in future. That said, if you have the full kit, the Trans guard wouldn't need to be swapped out. We've currently got a front and sump set to suit this Diff Drop in progress. Our best suggestion with the front and sump would be to try selling it on.
Looks so good :) Do both the Stock Toyota Underbody Protection and also the Kaon Underbody Protection fit with this Kaon Diff Drop Kit?
@KAONaust
Жыл бұрын
Hi there! At this stage we can't confirm it's compatibility with the Factory Toyota sump guard, but it is unlikely. Our current N80 & Fortuner guards are going through a revision to be compatible, which we'll be adding soon. Our recently released N70 guards are compatible - just select the Diff Drop option. Hope that helps!
@DonsShed
Жыл бұрын
@@KAONaust It sure does thank you :) lucky I didn't buy any Underbody Guards as yet!!!.... looking forward to the revised Kaon ones and this Diff Drop Kit for my MY22 Fortuner!!! :)
@Mart25F
Жыл бұрын
Will this work with the fj cruiser and 4th gen 4runner? Front diff is pretty much the same
Wondering if this would work on a U.S. model 5 th gen 4Runner ?
@matthewmoser2090
Жыл бұрын
i agree i wonder
@jamiemagdeleyns9152
11 ай бұрын
Yes
Great job. Does this fit other Toyota's like the FJC?
@KAONaust
Жыл бұрын
Afraid not, but we have other diff drops slated for development in 2023.
@lukestoyz
Жыл бұрын
Waiting for the us spec Fj Cruiser to purchase
3rd gen 4runner? 😊
Weird he put the grease on the new parts but he didn’t clean or put grease on the old bushings he reused
Hello where can i find diff drop for Hilux Vigo?
@KAONaust
Жыл бұрын
Hi there! It's out of stock at the moment, but you can signed up to be notified when it's back in stock here: www.kaon.com.au/diff-drop-kit-to-suit-toyota-hilux-n80-arm-style
Anything coming for the Prado 150?
@KAONaust
Жыл бұрын
It's in very early development, we're optimistic we will have something out in 2023 for the 150, along with all new light-weight underbody guards to suit.
@smashwindow01
5 ай бұрын
Still working on these for the 150? You would sell these like hotcakes in the US for 4runners and Gx460s.@@KAONaust
What is this for?
@KAONaust
2 ай бұрын
That's a complex question! But in a nutshell, it lowers your diff, which after installing a lift can often be necessary for IFS vehicles to ensure correction of CV angles.
Yeah the diffs are at am extreme angle.... When the truck is off the ground 😂😂😂
@ggbogo935
9 ай бұрын
it isn't a truck I wish people would stop calling them trucks
No international shipping 😢. Bummer
@KAONaust
Жыл бұрын
Hi Brian, that's not correct! We ship all over the world. If you go to our website there is a shipping calculator that should output the shipping cost to your location. If you're finding it's not working, please reach out to our team at info@kaon.com.au and they'll be able to help you out.
@user-dh2xw7bd1g
Жыл бұрын
2014 fj ?
The bracket is killing me
this will void your waranty don't do this