Thanks for the vid always interesting.

@RussDouglas222

5 ай бұрын

Thank-you and thanks for watching, feel free to share. 🙏🤓 All the best, cheers. Russ

A proper eye opener this video, thanks. I take it that, if you are shooting something a lot flatter, i.e 17HMR or a centre-fire calibre, you shouldn't have the same issues?

@RussDouglas222

2 күн бұрын

Our pleasure, thanks for watching -please share to help spread the word. I would hope something flatter-shooting wouldn't need such MOA compensation, certainly no more than 20MOA. There's an active (huge) Zulus thread on the AGF discussing these scopes, definitely the place to ask... airgunforums.co.uk/threads/arken-zulus-user-experiences.71841/ Happy shooting, cheers. Russ

I had the same problem with my tikka t1x 17hmr, had to use 5 shims made from a drinks can. To get the zero around centre.

Thank you for the video.

@RussDouglas222

2 күн бұрын

Our pleasure, thanks for watching, cheers. Russ

Would love to see the video that demonstrates the VCSEL IR. My understanding is that the IR beam size is adjustable. So I am curious to see how small beam it can narrow to and how far it can reach.

@RussDouglas222

2 ай бұрын

My video showing the Zulus ZHD520R using onboard IR (850nm then 940nm) is here: kzread.info/dash/bejne/YpeEuqaYms7IeLg.html Thanks for watching, cheers. Russ

I need 60MOA for ratting at 7m! So a 35MOA mount on a 20MOA rail would be good enough 😎

I would love a detailed video, explaining how to set up the ballistic calculator on the app. Compared to different pellets I run a .25 caliber pellet. But I’m not sure if I have the ballistic calculator calculated right right right now I’m running JSB heavy at about 940 to 9 8 ft./s

@RussDouglas222

4 ай бұрын

kzread.info/dash/bejne/Y6tnpc97cpfOhag.htmlsi=EsYN-Xzv91mmUkRu

A question for you? Is there any deviation in long distance shooting between 0 Mao foot and 35 Mao foot? No protractor in sight tonight. Doesn't the baristic program show the point of impact incorrectly?

I have a 25moa rail on my 22lr. Would this work ok with the arken zero moa mount with 22 subsonic ammo ?

On my Sako P94 with 0 moa rail and the 35 moa mount gives a Y value of 180 for 47 meter zero with subsonic ammo.

@RussDouglas222

4 ай бұрын

If +180 you'd benefit from either the 35MOA mount or an EagleVision 108MOA mount. 🤓👍 Thanks for watching, cheers. Russ

@stephencarroll6014

4 ай бұрын

I have the 35moa mount. I'm thinking the 20 moa mount would be better. The 35 moa is on the limit of adjustment for my 22 but perfect for my .177 HW97. The 0 moa might be too much for the .177.

And does the arken mount fit on the pard 008

Which version would I be better with shooting out from 25 to 150 yds on a 20moa air rifle please the 0 or 35moa

@RussDouglas222

Ай бұрын

That depends on your calibre and power level. .177" FAC air I'd say 0MOA. .22LR subsonic I'd say 35MOA, as-per Billy & Bruce's findings. Thanks for watching, cheers. Russ

What subs was Bruce using to get a 17" drop at 50yds with the flat mount? Looks like CCI subsonics from the video, but with those the drop should only be around 8" allowing for about 4.6" of drop plus scope height of around 3.5" totaling ~ 8" total.

@brucemcpherson8832

3 ай бұрын

The purpose of the video was to show the difference in point of impact on an already zeroed rifle when the mount was changed from 35moa to 0 moa The rifle was originally zeroed at 50 yards using CCI subsonic ammo and then the mount was changed from 35moa to 0 moa and the rifle aimed at the same target, and using the same ammunition as was used to zero with the 35moa mount. Since 1 moa is very, very close to one inch at 100 yards, 35moa at 100 yards would be 35 inches and at 50 yards it would be 17.5 inches So, simple maths says that with the rifle zeroed at 50 yards on a 35moa mount, changing the mount to 0moa should drop the point of impact by 17.5 inches When we did the experiment the point of impact dropped by around 18.75 inches which, IMHO is good enough agreement with what was expected

@paulh71

3 ай бұрын

Thanks Bruce, that makes sense. I forgot to allow for it being zeroed on the 35 mount, which I'm guessing resulted in the reticle being above centreline a bit, which would then lower the barrel even further when changing to the zero moa mount but still using the same zero co-ordinates. I've been trying to work out a formula to calculate how much MOA would be required in a mount for the zulus based on scope height and ballistics, to get the reticle perfectly centred in the y direction. Still working on that... should be possible but not sure my brain is up to the task.@@brucemcpherson8832

@brucemcpherson8832

3 ай бұрын

On the 5-20 Zulus, each "click" moves the reticle by one pixel and if you crunch the numbers based on the vertical field of view and the number of pixels, then one "click" moves the reticle by 0.1426moa.

What mount would Bruce & yourself recommend for a Zulus going on a browning X bolt in 22-250 calibre please ? Many thanks

@RussDouglas222

5 ай бұрын

I'll ask Bruce for you. Thanks for watching, cheers. Russ

@RussDouglas222

5 ай бұрын

Bruce replied: "A Contessa extended Picatinny rail would be my choice, Alan Rhone sell them for £117.10." Cheers. Russ

@adrianhopkins4825

5 ай бұрын

@@RussDouglas222 Many thanks

Can you translate this into English please as I have a job understanding that foreign language 😂

@RussDouglas222

5 ай бұрын

😆😆😆 Hahaha nah I thought everyone loves Bruce's accent. 😲 I've been up here since '94 and understand some pretty broad Aberdonian (& teuchter) accents just fine, but Bruce speaks nearer King's English really. 🤓 Thanks for watching, cheers. Russ

So on a zero moa gun what moa mount would you use ?

@RussDouglas222

5 ай бұрын

20MOA or 35MOA mount if your rifle rail's 0MOA, certainly for air rifles and subsonic 22LR, going by our testing. Thanks for watching, cheers. Russ

I got a omoa I have shamed it up. Shall I take the shims out now if they have updated the scope what do you recommend because my radical is still low

@RussDouglas222

4 ай бұрын

Hi Dave, which mount do you have, 35MOA or 0MOA, and is your rifle rail level or inclined? Up to you -whether you keep it as-is (shimmed between the rear of the mount and scope to lift the reticle into the centre), plus the updated firmware will centre the reticle when zoomed above base mag'. Or fit the mount that better centres your reticle at base mag. 🤷🏻‍♂️ Thanks for watching, cheers. Russ

@davehibb

4 ай бұрын

@@RussDouglas222 0moa

I don't understand how the ballistics calculator differentiates between different scope mount moa. There's no parameter to input this with the app??

@RussDouglas222

3 ай бұрын

It doesn't, that doesn't affect the BCL at all. The MOA inclination (declination) of the scope mounting rail helps determine how high/low/central the reticle is, i.e. whether or not the zeroed reticle is in the middle of the display. Thanks for watching, cheers. Russ

It’s a shame you couldn’t test a centrefire for 100yard zero

@RussDouglas222

5 ай бұрын

Bruce has centrefire calibres, I'll see what he can do. Thanks for watching, cheers. Russ

@RussDouglas222

5 ай бұрын

Bruce has offered to test it on his 22-250, give him a few days. 🤓 Cheers. Russ

@PaulSmith-gw9ri

5 ай бұрын

@@RussDouglas222Superb 👍

What moa is the standard pard mount

@RussDouglas222

Ай бұрын

Which Pard?

@Theking-qx4zd

Ай бұрын

@@RussDouglas222 pard 008s lrf

@RussDouglas222

Ай бұрын

@@Theking-qx4zd I believe it's 0MOA, and the Zulus scopes might fit the 008S mount, but I believe the screw lengths are different. Cheers. Russ

Добрый день, как иностранный гражданин можно ли купить винтовку fx m3 в Великобритании?

Can you not complete a full sentence without cutting the video? 😂

✌💪👍👍👍😯

Hello, what model of 22LR rifle does your Billi have???😯

@RussDouglas222

4 ай бұрын

That's Bruce's Tikka T1X, in an adjustable laminate stock. Thanks for watching, cheers. Russ