Code for Arduino UNO: The same code will work for Arduino Uno board too. I have checked it out. In case if it doesn't work for you, Replace this line, if (Serial.available() ) with the following line. if (Serial.available() > 0)

@jaysrimush

5 жыл бұрын

Super

@nimashdidulanka5351

4 жыл бұрын

pissa 1

@shahidabegum8422

4 жыл бұрын

plz help me bro

@furimaker1897

4 жыл бұрын

hp

@geethikawijesinghe8899

4 жыл бұрын

Ayye mega eka වෙනුවට Uno eka ganna බැරිද ?????????????

Short and to the point, I wish every Arduino tutorial video could be like this one.

@TronicYaka

6 жыл бұрын

Thank you so much. If you have any doubt regarding any of my videos, join my fb group "Tronic Yaka - HELP DESK" and ask your question.

it works perfectly, thank you so much!!

Thanks a lot for this great project. After some problem solving, of which i learned a lot, it works perfectly. In the app the buttons nr 5 and 6 where both placed as 4. This was confusing at first. Car could not stop because knob 5 did not exist but handled himself as being knob 4. After i corrected the knob functions in the app it now works perfectly.

@pedropedroza345

4 жыл бұрын

Thanks, I was looking for that because I can't stop de car Lol

This is very useful .Thank you very much!

I have no words to thank you for helping me, I was already without hope in my project, I had already tried different ways and different codes, thank you very much friend and much success 🙏🏻

Thanks sir this was the easiest bluetooth car I have tried so thank u very much.

Supiri aiya. සරලයි,pehedili එලම

@TronicYaka

6 жыл бұрын

Thanks malli. Facebook Page ekath ekkath join wenna. "Tronic Yaka"

Thanks bro..worked perfect. Made some additional changes after the original code worked. Cheers!

@TronicYaka

5 жыл бұрын

My pleasure, bro. Cheers!

@praveenkumar8126

4 жыл бұрын

Bro please share with me also. That new code..

Excellent video very detailed. Thank you.❤

@TronicYaka

4 жыл бұрын

Thanks 🤘

This was very awesome,, great work..❤️

@TronicYaka

5 жыл бұрын

Thand buddy ❤️

Thank very much!

I did everything perfectly with Arduino Nano . start off everything works , after a few controling everything not moving . bluetooth stilll connecting but 4WD not functioning at all. Have to reload the code into Arduino Nano to work again. Pls advise

Correct me if I'm wrong, but are you using a 7.4 V battery to power the 6V DC motors? That will reduce the lifespan of your motors

Thank you for this video man! Btw I need help on trying to control servo motors using the L1 and R1 buttons on my wireless ps2 remote, I'm trying to control 6 servo motors for my robotic arm but I can't control them all because I can only control 4 total servos with the joysticks, I'm not really familiar with Arduino code so could you plz help me with a little code regarding on controlling a servo motor with the L1 and R1 buttons, this is for a project at school.

Congratulations great projects !!!

@TronicYaka

6 жыл бұрын

Edye souza Thank you for the feedback. Check Tronic Yaka up on Facebook and Instagram too.

If I use Aurdino Uno it will be the same code that you described ?

patta.theruna niyameta.thenks broooooooo.

I am new to using the Arduino Nano and electronics in general. Can I implement a switch on an Arduino nano circuit that shuts down the Arduino nano so that it can be plugged in and out safely? Or can the microcontroller be plugged in and out without ruining a program?

Hey. Is it necessary to press stop botton after each operation... Cant we just make it work without using stop botton...

Hi! i was just wondering when you first turn it on without any of the Arduino installed, should the buzzer module be making loud beeping noises?

@TronicYaka

3 жыл бұрын

There is no buzzer module installed in this project. What buzzer are you talking about?

Very much clear video thnks frm india

@TronicYaka

4 жыл бұрын

My pleasure ❤️🔥

i have four 1.5v batteries does it work on the circuit? and is it okay if i bought the same battery like yours in the video but instead of 2 i use 4

Good work brother...! Keep it up. Waiting for your new ideas

@TronicYaka

6 жыл бұрын

Thank you so much Aiad

supiri kolllo :)

@TronicYaka

6 жыл бұрын

Thanks bro! Stay tuned for more interesting videos!

Best Arduino bluetooth control car video,Its awesome bro ,I want u to know that (it cleared my doubts)

@TronicYaka

4 жыл бұрын

Thank you for the feedback 😍 Hope u'll stay connected for the upcoming videos as well ✌️

sir can you help me my problem is the forward and backward didn't work . all my program is same as your program i dont know why by the way i used hc-05

Your channel's getting much interesting bro.. try path finder robot as well in your upcoming videos.. Keep being best... #suba..

@TronicYaka

6 жыл бұрын

Lasindu Hewawasam Thanks for the feedback machan. Sure, I'll make path finder too. #ජය

Excellent explanation

hey gracias tu codigo me salvo nuevo seguidor

Nice video, nice explanation, Thumbs Up

@TronicYaka

6 жыл бұрын

Haz Ice Thanks for the feedback. Check my facebook page "Tronic Yaka"

Did u made aurdino uno based gesture controlled car ?

Well done aiya..i also want to try...and i think it will be easier thanks to your excellent explanation

@TronicYaka

6 жыл бұрын

Aneesha Perera yes, you can do this! Thanks for the feedback and stay tuned for more interesting videos!

@aneeshaperera4726

6 жыл бұрын

Charith Sachintha Surety thing aiya

Can we use HC - 05 instead of Hc-06 bluetooth module

Most detailed

thanks, good video

superb bro.. 👌💪🏿

@TronicYaka

6 жыл бұрын

Thank you, Kasun!! Stay tuned, many interesting videos are coming soon!

super vedios congradulations bro!!!!!!!

@TronicYaka

5 жыл бұрын

Thanks bro ✌🏼

Hey is it OK if I would connect aurdino bord with its data transfer wire for power supply??

supiri bro

@TronicYaka

6 жыл бұрын

binora ninsith Thank you for the feedback bro. Stay tuned for more videos. Share videos with your friends too ✌️ #ජය

@slmvcchannel335

5 жыл бұрын

Oyawa sub kara mawath sub karala සහයෝගයක් dennako yaluwa

increible apesar de no saber el idioma entendi todo y lo pude aser sigue asi

@TronicYaka

5 жыл бұрын

I just understood the word Incredible. Thanks mate

Nice explain bro 👍👍

Supiri machan

@TronicYaka

6 жыл бұрын

Thank you :)

Mage Bluetooth module eke vcc wenuwete 5v kiyela thiyenne. Ethekote code saha pin gahane than wenasdhdhe?

@TronicYaka

6 жыл бұрын

Janaka Siriwardana wenas wenne na.

Hi your car was great but I have a doubt I have the same battery as yours but mine is 3.7 v and 6000mah battery so should I use it please tell fast

thanks for video

While using 1.5 volts both Arduino and l298 board are lit and Bluetooth is not working...but when it is connected with the system all lights including Bluetooth are glowing.. Is it due to battery voltage insufficiency

sir i have question . can i use any arduino atmega 2560 ? or it should only on the video ?

I built everything as suggested by this video. My car turns round and round instead of going forward & reverse. What could be wrong. Can you please suggest.

Hodai

Hi, thank you for the video, but i have an error when uploading the code is it because i am using 4x 1.5v battery ? or something with the connection ?

@TronicYaka

5 жыл бұрын

You should unplug the RX and TX pins when you upload the code. Connect those two wires to Arduino board after uploading the code. (For fast responses, join our facebook group "Tronic Yaka - Help Desk" and clarify doubts)

Connection made by UNO,DC gear motor , 12v/7Ah battery... program uploaded successfully and HC-05 connected...but motor is not running...why?

@ishanmithun6780

4 жыл бұрын

me tooo

@ishanmithun6780

4 жыл бұрын

why

You have to use high current batteries in this project. Otherwise, the motors will not move properly.

@lightdrago6824

6 жыл бұрын

i am new to arduino, i got a arduino uno to learn programming which has been my childhood dream, if you would tell me the code for an *arduino uno* it would help a loot. also thanks, i subscribed and i love ur videos =D

@hemanandd2407

6 жыл бұрын

Can you please exactly say me what board is this and the model it’s arduino mega of which version

@391aap

6 жыл бұрын

Sir... Can u sell this progect. Please please sir.. I try many time but not successful... Contact me : 7009701941 WhatsApp 7009701941

Hi, pls answer me back ASAP as it's important. My Arduino Bluetooth name is ZS-040 but I followed everything in the video soooo carefully but when I turn Bluetooth on in my phone, there isn't any device to connect to Arduino Bluetooth. Is it HC-05 or is it different??

@TronicYaka

3 жыл бұрын

I used HC-06 in this project

@CrimsonRoblox

3 жыл бұрын

@@TronicYaka ZS-040 is the same as yours too and should say HC-05 on my phone too. My expert arduino teacher told me so. Btw though should the 5v of motor driver connect to arduino mega and also get a battery which holds around 12v and attach to 12v and GND of motor driver???? What battery do I need to attach to 12V and and of motor driver I have a battery box which holds 4.

@CrimsonRoblox

3 жыл бұрын

@@TronicYaka what's the problem with ZS-040 Bluetooth and idk if it's HC-05 or HC-06. Btw I use 1 9V Battery and I connect it to one of the motor drivers and I connect a wire from the motor driver to another motor driver then GND it to Arduino Mega. Sometimes when I do testing from 5V to Motor driver pins to see if the wheels can spin, All 4 Wheels will move normally and spin normally and sometimes, the wheels wont spin or it will just move slightly and then stop. How many Battery of 9V u need?? I'm doing a school project idk if I can buy more 9V Battery since I'm just a student. I no money. Btw The Bluetooth doesn't show up on my phone to pair it so I can control robot but I'm not sure why it doesn't wanna show the HC05 OR 06. Is it bcs of power or......??? I'm gonna fail my school project as there isn't any program to it

niyamai ayya

@TronicYaka

5 жыл бұрын

ස්තුතියි malli

On power up, the left side motors momentarily move? Otherwise works well.

is it really enough two 3.7 li ion battery supply on 4 motors and 5v arduino ? do u use other power to supply with the rc car?

@TronicYaka

6 жыл бұрын

yes, it was enough. Check here 7:14

If i use hc 05 module is there any problem ??

Error compiling for board Arduino/Genuino Uno what should I do

please, I worked as a project for a car robot that works with voice commands, but after I installed the parts and connected the battery 12 volts, no light appears in the Bluetooth circuit and it does not appear on a mobile that it is present, but when you connect the Arduino to the laptop, the Bluetooth appears to work, if you allow help is necessary

@TronicYaka

3 жыл бұрын

This could be due to, 1. Wrong connection of battery terminals 2. Battery drained

I can't see HC05 on the discovered devices :( please send help

I have doubt shall we connect power supply to arduino uno from l293d? , as that you contacted as arduino mega

@user-cc3qs8ic6g

2 ай бұрын

it worked even without the power supply connected to the motor driver

hi charith sir i made the car N uploded the code as exactly as u said but when i give the command from the phone via bluetooth i doesn't do anything pls help me

plz help me about this error. after uploading code my project will not work "Sketch uses 2628 bytes (1%) of program storage space. Maximum is 253952 bytes. Global variables use 189 bytes (2%) of dynamic memory, leaving 8003 bytes for local variables. Maximum is 8192 bytes."

I have used HW hight watt battery of 9 volt for 4 motor. But car not moving. I think it is the main issue of power supply. So, please suggest me which battery have to use.

@TronicYaka

5 жыл бұрын

I used "Ultrafire 4800mAh, 3.7V batteries. (It's okay if you can find a battery which is greater than 1000mAh)

@MsWitticisms

5 жыл бұрын

@@TronicYaka can we use 4 AA batteries for this?

Can I use a uno board for your codes if I can't use please put the uno board codes

awesome

BEST

@TronicYaka

5 жыл бұрын

Thanks 😍

mama L293d motor shield 1k aragen me car 1k hadanna puluwanda bluetooth pin fix karanne kohomada keyala denawada

Hello there, your code is ok and it works fine as well as the connection to the bluetooth but my car is not moving. I have 9V battery. Can I use 2x 9V batteries to make this thing work? And yes when i remove the battery and connect it with PC USB it still does not move... Please help me. Tomorrow is my show. :/

nice

Thanks sahooooooooooo patta

In this the program is correct? And we can put 9v battery instead of two 3.7v battery

@TronicYaka

6 жыл бұрын

lokesh ravichandran program is correct. The current output of normal 9V battery is not enough to run motors.

aiye wow.........

Muy bien explicado

@TronicYaka

6 жыл бұрын

Thank you so much for the feedback :)

@jariu95

6 жыл бұрын

Tronic Yaka zs-040

When I powered up arduino board through laptop bluetooth module is blinking.But when connected to battery it is not .Why is that so?

Should i use two 9volt battery

Hola, que codigo poner para la velocidad de los motores?

Thank you

@TronicYaka

6 жыл бұрын

Nikhil Radder my pleasure :)

then sir what version application of arduino should we upload

can we use 12 v two lead acid battery for four motor and one l298 driver module

@TronicYaka

5 жыл бұрын

Don't connect those two batteries in series. Cause the resultant voltage becomes 24V which has a risk to damage the board. So connect them in parallel.

it's not working for me. done everything as shown in the video. i am powering the mega with a power bank and using 2 motors with a 9v hi-watt battery. my motors are big but they are working fine when connected directly to the battery. please help.

@Hardik-by2xr

5 жыл бұрын

all the lights are blinking . when i press a button on the app , a light also blinks on the mega.

Can I use two 9v batteries connected in series??

In the app there are 6 knobs (A,B,C,D,E......) and there should be an F. But it is not there, it is a D again. Can i rename this button in any way and call it an F ? In this way i can think of an extra function under knob F. Best regards, Leo, The Netherlands.

can we use 9 V Hi-Watt battery and also can we give power to arduino first and then giving power to Motor drive...

@TronicYaka

5 жыл бұрын

If you are talking about the HW brand, then those 9V batteries won't enough current to drive the motors. So you have to use high current batteries as I have shown in the video. You cannot first give the whole power to arduino board and then take power out from the arduino to power up the motor driver. This will destroy your arduino board. Either you have to give power separately or first give power to driver and then take wires out from it to power up the arduino.

Great and easy. One issue - BT-## is not getting power, when using UNO. planning to use nano. will it work?

@croydon21H

4 жыл бұрын

supplied power directly from L298N. solved that.

agar L298N ki jagah motor shield use kare to ? kya ye work kare ga ???

I did everything correctly but after connecting to the mobile the Bluetooth module s red light doesnt come so the motor is not rotating . Can you please guide me ???

Hi my car is not moving, the motors work, I ve connected the data cable, I ve connected correctly and the bluetooth commands work but it does not move

Hi bro I'm getting avrdude done but error is showing as problem uploading to board

Hola tronic oye tengo una duda funcionara si le pongo un modulo bluetooth HC-05 o nesesita hacerse una configuracion en el codigo porfa ayudame¡¡¡¡ ¡UN SUSCRIPTOR MAS!

Can I use another app? That doesn´t work on my android device

Have any problem? Join the facebook group "Tronic Yaka - Help Desk" ask your doubt or question in the group, then you will get the fast responses.

Can I use 3 pieces or maybe 4 pieces of 18650 battery for this project?

@TronicYaka

6 жыл бұрын

Jikanime Time Yes, you can.

If i using nodemcuv3 can it work?

bro everything is done only my car is not running a last stage that is when bluetooth module is connected and i am pressing forward but it is not moving

The motors work with 7.4 v ?, Is not there a problem with that voltage?

@TronicYaka

5 жыл бұрын

No problem. just above 5V is enough. But those batteries should provide high current. Thats the main thing here.

Очень хорошо работает.

@TronicYaka

6 жыл бұрын

Спасибо за просмотр. Поделитесь этим с друзьями.

does it work for two motors

hello bro can i use 2 battrie 3.7v 12000mAH ???? not like 4800mAH !!!!

@TronicYaka

4 жыл бұрын

Yes you can use two of them to power the motor driver. Use another two to power the arduino board

@99199678

4 жыл бұрын

@@TronicYaka ok thank you bro