OSOYOO Robot Car Starter Kit Lesson 1: Install UNO R3 Board and Motors on Chassis
Тәжірибелік нұсқаулар және стиль
OSOYOO Robot Smart Car for Arduino DIY Learning Kit with tutorial Wifi Bluetooth IR Modules and Line Tracking Ultrasonic Sensors
Lesson 1 Tutorial : osoyoo.com/?p=4906
OSOYOO Robot Car for Arduino (USA link) amzn.to/2OKYX77
Пікірлер: 32
I have had a couple errors while running sample code. Is there an updated one?
@osoyoo1265
4 жыл бұрын
we upload our robot car and code, you can follow our instruction: osoyoo.com/2018/12/21/osoyoo-robot-car-kit-tutorial-introduction/
Please create all in one smart car(Bluetooth control,line following, obstacles avoidance) please share code and circuit
@osoyoo1265
4 жыл бұрын
You can go to our tutorial link.
I want kit
I cant find Arduino Uno in manager, some help
@osoyoo1265
4 жыл бұрын
Do you mean you can't find the Arduino UNO in Arduino IDE or you can't find the port in Arduino IDE? If you don't find the Arduino UNO in Arduino IDE, the name for the board is Arduino/Genuino UNO. If you don't find find the port in Arduino ID, you need to try another board or USB cable.
Why doesn't ZIP have the file configuration.h?
@osoyoo1265
4 жыл бұрын
Configuration.h sets in code, as someone can't upload the code with Configuration.h
At 4:38 which m3 screws and nuts are they
@hippieluv2001
5 жыл бұрын
The pne with nuts, m3*10.
@osoyoo1265
4 жыл бұрын
Do you mean you don't get m3 screws and nuts in your package?
How do I connect the voltage meter to the driver module, is there a preconnected cord to it or do I need to connect one, because I do not have one.
@aidenhijuelos3226
6 жыл бұрын
?
@aidenhijuelos3226
6 жыл бұрын
None of these cords are matching mine now..
@aidenhijuelos3226
6 жыл бұрын
Please help
@osoyoo1265
6 жыл бұрын
Connect the voltage meter to the driver module with male-male jumper wires
can we use AAA batteries
@kahilzhang5591
6 жыл бұрын
krishna dev no you can’t but you can use these: www.amazon.ca/gp/product/B01JBTXQVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
@osoyoo1265
4 жыл бұрын
The robot car kit just work under 7V, and the battery case is just for 18650 battery. you can order 18650 battery and charger on www.amazon.com/dp/B07ZR8NKJL?ref=myi_title_dp
wtf are the batteries the space is massive
@osoyoo1265
4 жыл бұрын
The battery case has been improved and it can fit most of 18650 batteries now.
The Software part goes through it too fast. I hope the rest isn't like this one. Give it audio, please.
@osoyoo1265
3 жыл бұрын
Thanks for your suggestion. You can follow our new video for new version robot car: V2.0 : kzread.info/head/PLvCUFipQZCUu3LF1ucYZ5x4CWBksZvkol V2.1: kzread.info/head/PLvCUFipQZCUtstVBU-7gLYCLhI1fRuca3
This is very confusing! Please help!
@osoyoo1265
6 жыл бұрын
Please check osoyoo.com/?p=4906
@kirtjoe283
6 жыл бұрын
OSOYOO ok, thank you!
@dellajaden5237
5 жыл бұрын
Agreed terrible instructions on this video
Woah.
@osoyoo1265
4 жыл бұрын
Thank you for your support
At 6:40 is so confusing help
@osoyoo1265
4 жыл бұрын
This is about installing an old battery case for 18650 to DC connector and you need to follow the link to install the DC connect: osoyoo.com/2019/01/08/how-to-properly-install-wires-in-dc-connectors/ If you get the battery case with DC connector, you needn't install this