::::::: Want To Buy Writing Machine For Your School or Science Project ? :::::: Watch Below video to Buy New Writing Machine or Parts From me. kzread.info/dash/bejne/qWWp1LOnhNPcnpM.html WhatsApp on 7698915121 to place order of above link writing machine.

Thanks for the ideas nice project. Easy to make and very efficent. The only problem one might face is getting the parts. Espeically, for projects 2 and 3.

Parabéns, só projetos top, show!!!! Continue assim!!!

Arduino = command block in real life Edit: Oh No, What did i do? So many people commented on my comment!?

@skyzonemc8876

4 жыл бұрын

Yes

@pumpyronaldrump_4417

4 жыл бұрын

Yes

@anthonyetn1

4 жыл бұрын

How do I get info regarding infarred decoders?

@premakumarisrinivas446

4 жыл бұрын

Reallyyyyy?🤔

@changoxp6163

4 жыл бұрын

Can I use tp ???

Amazing content man, Why don't u start making tutorials of raspberry pi, Arduino and all various things... We'd love to hear from you...!

@Chefhazem0

4 жыл бұрын

Thats perfect. kzread.info/dash/bejne/aYptutZ9g7itiMo.html

@donati6432

3 жыл бұрын

Привет друг давай Сотрудничать Я снимаю Про Майнкрафт Постройки заходи посмотри Подпишись! Если хочешь а я на твой канал Подпишусь. Идет?!

Brilliant channel, u should probably think about making a real time version of each one. 👍

@Imperious_union9

2 жыл бұрын

Lol

Excelente video Bro, muestras el paso a paso además de dejar los links de descarga y el código de Arduino, bastante conforme y son proyectos muy útiles para utilizarlos en la universidad

@powertechCol

2 жыл бұрын

Amigo en dónde están las descargas? Ayudame por favor

Amazing! Thanks for video

Any good videos to learn more about upward application of this knowledge? Super into physics and the magnetodielectric universe + I know all about flux and gauss. Would like to utilize this to small electronics then scale them into efficient tasks. Anyone have info/links to share? Basically what would one have to do to look at a board and/or a set of wires + solder etc and just natively know how flow is inhibited / induced + what one can do to increase efficiency of a circuit via directing volatile flow around to where it’s needed for an effect such as scanning finger + confirming w an unlock feature and/or denying via staying same. Is programming involved too or are most of these things pre-built?

Me encantan sus proyectos

Awsm creativity ! I like goggles with digitl apprature. ! But it looks hard to make !

Hats off to your smooth work bro 😎 If I did it no one will even bother to look at it 😂😂😅😅

This is also amazing bro superb

Супер :))) давай еще

I like it bro.amazing content

Forget about the projects .. Who in the earth has that huge brain for making aarduino

@santiagoboyadjian7082

3 жыл бұрын

arduino is a shit microcontroller, maybe good for new people, but there ir a moment where u will find it obsolet. There is a lot of better microcontrollers

@pratikghosh8636

3 жыл бұрын

and it cant be used as a product coz i have made a project which only worked for 1.5 months

@cocacowboy21

3 жыл бұрын

@@santiagoboyadjian7082 What are some better ones?

It started off well enough, but then rapidly turned into, "Who needs screws, stand-offs, nuts or bolts, or any sense of actual craftsmanship at all? Let's just cover everything in tons of glue!"

@dagsco.development7697

3 жыл бұрын

It really is interesting to see the juxtaposition. You have someone who seems very clever and resourceful but also has absolutely no intelligence about how to properly do anything. Maybe he's just following others' tutorials and that's all this is

@JamesMorningstar

3 жыл бұрын

​@@dagsco.development7697 , it looks more like laziness to me. Notice on the basic plotter design, he made a nice, lean, and clean looking slide out of mostly wood, but then made the other axis a glued-together mess of unnecessary scraps. It would have looked 10 times nicer if he had just done the same as he did for the first axis and stacked the two. How much more work would it have taken to just come up with mounts for the servo, pen, and battery made from wood, instead of gluing everything and making it so it would not be easy to ever replace any failing parts. And then there's the R3 board itself. It could have looked much neater, and allowed for replacement or reuse of the Arduino if he had simply drilled four holes and used small mounting bolts with a nut on each side of the wood, for each bolt.

@digital945

2 жыл бұрын

Actually he just made his you can change it with screwing

@Nithin16209

Жыл бұрын

He also glued the use and throw battery. What the heck. What will he do when the battery runs out. He can't replace it cause he didn't use a holder.

Pra quem tá sem inspiração.. esse vídeo ajuda muito

I really love this video

Thanks you dude

Manteppp bgt nih. Thanksss

Thank you so much for this video 👍🏻👌🏻✌🏻

Me encanto el video Excelent +1 suscriptor

Trying to eventually do the third one for remote access to a pi interface

I recommend slowing down the video , it was a bit too fast. But this has inspired the creativity in me.

Круто! Я тоже хочу умные очки без переплаты!🤓

And the first device from 12 volts will not explode?Or are there fewer Volts?

I really loved the smart glass video. Can you tell me all the materials used? I want to build one. Thank you.

Wow! Awesome!

Thanks for tutorial Iam want to make it,,

Wow genial... Pero no soy buena con eso 😄😳❤

what a creativity superb nice work

Auto writer wow that looked nice))

Do I have to especially use the adafruit fingerprint sensor?

Good tank's very much Master..

*creativity recommended just appeared*

Wonderful video Creativity Buzz...❣❣🇮🇳👍

I love your proyects

Kreatif banget😍😍

The glasses idea seems to be massive , he could halve the size and have loads of features just by using a very small smart watch with Google maps for a nice huds up display like Google glasses but over £1000 cheaper.

That smart glass, I proposed that project to be my final year project three years ago but my supervisor rejected it, she thought it wasnt a great idea. Hahahaha and we somehow failed some part of our fyp. It didn't go really smooth but luckily I scored my fyp.

@haisoni_

3 жыл бұрын

I feel so sad

@nellysayago5582

3 жыл бұрын

There are many factors in learning circuits. One place I found that successfully combines these is the Gregs Electro Blog (google it if you're interested) without a doubt the most useful info that I have ever seen. Check out this great resource.

@haisoni_

3 жыл бұрын

@@nellysayago5582 yeah it's a nice idea idea even now a day you can get keyboard that fits in your fingers like ring and you need just gestures to use it. It will be a great idea actually.

I watched the video that you uploaded. Since i'm a programming novice, so can I get some Arduino programming code?

@abhishekk.m.7514

3 жыл бұрын

There are plenty available online :)

pls send me the link of the app that you have used for the smart glasses

Bjirrt slurd nonton hentong di sini enak nih Aowokwok :v

Eu fasso robótica e achei tudo muito top

how will you charge or replace battery of both of those also changing refill seems really tough on that automatic writer

when i run the 3rd project code (RetroWatchArduino_u8glib) the below mentioned error recieved. Please help to solve this bitmap.h:1269:43: error: variable 'bitmap_array' must be const in order to be put into read-only section by means of '__attribute__((progmem))' PROGMEM const unsigned char* bitmap_array[] = { ^ RetroWatchArduino_u8glib:123:32: error: variable 'weekString' must be const in order to be put into read-only section by means of '__attribute__((progmem))' PROGMEM const char* weekString[] = {"", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"}; ^ RetroWatchArduino_u8glib:124:32: error: variable 'ampmString' must be const in order to be put into read-only section by means of '__attribute__((progmem))' PROGMEM const char* ampmString[] = {"AM", "PM"}; ^ RetroWatchArduino_u8glib:161:30: error: variable 'strIntro' must be const in order to be put into read-only section by means of '__attribute__((progmem))' PROGMEM const char* strIntro[] = {"Retro", "Watch", "Arduino v1.0"}; ^ exit status 1 variable 'bitmap_array' must be const in order to be put into read-only section by means of '__attribute__((progmem))'

Thank you bro

regarding the door lock: how long do these two 9V-blocks last?

@kesavmanoj7963

2 жыл бұрын

Atleast 19 seconds

@michaegi4717

2 жыл бұрын

@@kesavmanoj7963 😂😂😂 But nocht much longer.

@becks0816

2 жыл бұрын

Not for a long time. So while this idea looks nice it lacks any real usage. Your door will be locked very soon.

@michaegi4717

2 жыл бұрын

@@becks0816 Yes that was what I intended to say. The only good thing in this concept is, that the batteries are on the same side as the sensor. At least you can switch batteries ;-) Or you just can connext the door-lock directly to the batteries without the fingerprint sensor. This is real minimum security.

@becks0816

2 жыл бұрын

@@michaegi4717 And this is why I don't understand why this should be one out three of the "top 3 ideas" you can do with an arduino. All it is is the combination of a premade fingerprint sensor which signals the Arduino if a matching finger print has been found. This triggers a motor run for some seconds, potentially wait some more seconds and then runs in the oposite direction for the same time. The motor does not even have a stop pin to signal when it has reached the end, it is just 2 wires. Even the power consumption monitor I made for my NAS is more complicated as it contains an OLED I can turn on/off by pressing a button, the power meter calculates the average consumption over 1 and 10 minutes, stores the data in a sql server (using MQTT) and the whole thing can be updated via OTA.

Creating a new activity is called creativity,..

Thats how minecraft Redstone engineer Learn 😎

Como? Las diapositivas gastrian mucha energia en la primer idea y muy dificil conseguir rectores bloqueadores.

@Chefhazem0

4 жыл бұрын

Thats perfect. kzread.info/dash/bejne/aYptutZ9g7itiMo.html

Very good. I want it😳. hello from tkm

Please make a separate video on this homework writing machine

Nice idea bro

Wow so sick

Excellent project

completely awesome

Does this work with elegoo r3 or mega2560

прикольно) но вкручивать в дсп винты по металлу - это сильно))

Hello friend Ideas bahut Achcha hai

You could use the homework writing machine to make a 3D printer

你很聰明，也很厲害👍！

I want lock warehouse shutter inside from outside is possible please advice

А первое устройство от 12 вольт не взорвется?Или там меньше Вольт?

Sick!

Great information

Dễ hiểu và hay, đã đăng ký kênh

PLEASE make video on" line water detector and automatic machine starting and off" for working people for household water supply

Where'd you find the app that goes with the smart glasses?

I have a new video about electronic weight scale with load cell HX711. And i use method regresi too kalibration and then the value in to program arduino.

I wish if I have the writer machine when I was a kid it doing my home works 🙄

@atharva2009

3 жыл бұрын

I am a kid right now and I am a little good at technology sooooooo....

@arnavrane4354

3 жыл бұрын

😭😭

very nice!!

Homework writing machine...... hehehhehehehhehe I love it

SUPER COOL LOS HICE TODOS GRACIAS

@Smoler95

4 жыл бұрын

Sabes cuál es el código Arduino para los lentes??

Ah-hah! That's why this has so many views! Damb robit doin homework lmao! You win...

Can u make 2 project with full details in single video Or pls tell us Step by step procedure Code everything.....

amazing vid 🔝

is that I want to put a counter with ultrasonic or approximate sensors in arduino to install it at the outlet of a had to come out rice. so keep the sensor activated by varying its work then culcular like this: 10 working minutes are: answer how many movements the sensor registered but in 10 minutes it fills 10 quitales if the sensor registers 10 quitales as 12000 times that I pass that serial value this way I want to calculate it some idea Help

is there a iphone version of the watch app for the ar glasses?

Wow super bro

Thanks a lot

Good work 👍

Can i subject-buy these and have ez job making these? An own time own target thing just after done put at shelf maybe then close. Like a quantity-payment thing?

wanted to have the opportunity to do these things ...

the homework writing machine and the EDITH glasses were awesome

Where to buy items like the board 1set

very aosome 3 experiences

How To Oprate CNC Machine Pls Make A Video

Pls, leave a blueprints/size for glasses (box)

@brunojani7968

4 жыл бұрын

Vegeta, what does the scouter says?

Useful content

WOW!!!!!!!!

Amazing

What is that small black part used in the expansion board Please let me know

@Epicmotivation2-0

4 жыл бұрын

It's plastic black polyester material...mujhe to ab mil.jaiyga bs..koi.disturb na kre 😂😂😂😂

Last one is E.D.I.T.H prototype

@krishnakedia9243

4 жыл бұрын

Even Dead I'm The Hero

Need a detailed video on 3 of them especially homework writing machine

@TheDrewker

4 жыл бұрын

Nope, nobody does that anymore. It's just videos like this with stupid fucking muzack over them all the time now.

Psycho man!!!!!!!.really amazing Punching as thrill

Amazing reflection

Good job 👍

this is my dream from me was still I childhood... I really want that and do that!!!!!!!!

@priti9016

4 жыл бұрын

@carlo yuan I'd like some advice to

@androidemulation5952

4 жыл бұрын

Try to get an arduino kit. It usually comes with a manual that has many projects to help you learn the basics. I could assure you, if you start to make the basic project, that within a week you will be more than able to make all these project. The hard part is only to start. once you begin to recognize the code, you will be able to make infinit amount of project. Your only limitation is your ideas. If you can think of somthing then it is possible. Good luck