Thank you for the content you bring to your channel. It's always nice, and I enjoy it; very thorough, and informative...as well as the nostalgia radios! Merry Christmas to you and your family :)

@knoxieman

5 жыл бұрын

Thanks Jimmy your very kind 😊

Great video with the snow in the beginning. Merry Christmas and Happy New Year.

@knoxieman

5 жыл бұрын

Thanks so much, have a great Xmas 😎

Very usefull. Thanks for all videos. Happy Xmas and Happy New Year !

@knoxieman

5 жыл бұрын

Thanks so much, have a great Xmas

Only just seen this mate! Hope you had a good one

Watching the Christmas special in Aug 2022

Beeping everytime you press a button...fast track to madness..

I got the Anytone AT-778UV radio yesterday. Upon removing the cover I find that it is plastic, and the circuit board not shielded in any way. The circuit board looks very cheap, and the fact that it is not shielded means that RF can escape from it. Depending on what you drive, there could be a problem with your on board computer and the rf escaping from the radio. So there are a few nice things about the radio, but you may have to find a way to keep RF from radiating from the case. Leave it to the chinese to make a decent looking and working radio, but to make it as cheaply as possible. They could really corner the market by upgrading the quality about 150%.

nice video always watching 73

@knoxieman

5 жыл бұрын

Thanks 😎

@davidfrazer6452

3 жыл бұрын

Can you post the software link please can't seem to find a working version. Put on band 2 in software still no joy

hi, where can I get a *.dat file with all PMR an LPD channel frequencies to import in that software. Thanks a lot

Great vid !! Could have turned off the beeping though !

Great video....I'll be buying one of those soon. Hope you have a Merry Christmas. 🎄 p.s. What was the animal at 13:27?

@dodegkr

5 жыл бұрын

Looked like a small deer?

@knoxieman

5 жыл бұрын

Ooh thanks, I hit and killed a small deer, had no time to react 😒

Hoping that there would be Crossband option the the next firmware

Hi Great video.. By any chance do you know how to bring the repeater names on the screen? Mine only displays their frequency. Their names were added while programming using a pc.. probably a button press somewhere but as you know the printed instructions aren't that great.. Regards..Neil

@knoxieman

5 жыл бұрын

Hi Neal thanks for that, I'm at work at the moment but I think if you press and hold the function button the option is in there, I will check later for you, it's a superb radio you've chosen very well.

So this radio can be programmed to TX on 462mhz and 467mhz?

Very good little Radio for the price - but Question from me is , when using a repeater how can you quickly listen to the input ?? any ideas, as its not been mentioned anywhere...

@philipriding

2 жыл бұрын

Go to frequency mode, type in the input frequency, then go back to memory mode, after an over just press the VFO and it will be on the input frequency.

Anybody know how to reset a forgotten password on AT 778Uv ?

Also, will CHIRP work to program this?

how can ı get this program, pls give me a link. thanks

Why do we need that music in the background?

Have you ever used Chirp to program the At-778uv? I just ordered one and I'm wondering if I can use Chirp as I'm more familiar with it.. Also, I noticed the Russian version you used has a lot less settings that that other version...

@knoxieman

3 жыл бұрын

Never used chirp to program the radio as the software is super easy to use.

Hi mate, Ive got two of these one is using V1 and the other V2 software is it possible to update the V1 radio to V2? as currently it states wrong model if I attempt to read/write with V2

@knoxieman

5 жыл бұрын

It should be possible, not tried it though

Anyone know how I can flip the screen? I pressed a button (I think it was no 4) and now it's all upside down

What the neck did you hit?

Do you know if it's possible to change the mic gain settings on these radios? Thank you

@knoxieman

4 жыл бұрын

Hi no on my version that's not possible

@nigelb5341

4 жыл бұрын

@@knoxieman ok thanks for the reply. 73's

@petemitchell6788

3 жыл бұрын

@@nigelb5341 open up the mic hole to 2mm and set band to wide in channel menu. Will change the deviation. It’s still going to be a little weak.

The Russian link links you to software that no longer works as of 4-3-2021. Could be a firmware issue who knows. Sent my radio back.

I downloaded the Anytime software, and no way not no how will it work with my AT-778UV! I keep getting multiple error messages, the main one being "Wrong model selected"! I will give the Soviet version a try. It was also my thought that there may be a firmware incompatability issue between the radio and the Anytime software. Thanks for the video.

@knoxieman

2 жыл бұрын

Yes there are different firmware, a lot of people are coming up against it.

This may be a very stupid question, but, what type of antenna connection does this require

@grigorirasputin5020

3 жыл бұрын

SO-239 on radio requires a PL-259 on cable.

I have been unable to write to the radio while the radio was widebanded - I mean when you perform the 'hold Funct & F4' button and choose altenative modes...... I see you were able to write the PMR channels to the radio - which Mode were you in to allow you to do this ? cheers in advance

@knoxieman

4 жыл бұрын

Hi, I was in the standard mode ie not wideband 👍

@Legacy4x4turbo

4 жыл бұрын

Many thanks.... im.just curious... as pmr channels are outside the standard band... hmmm ill have to take another look...

@Legacy4x4turbo

4 жыл бұрын

Done it! I think the file i made was saved before I changed the mode.... i re read the unit after changing the mode... then updated the file... and wrote it to the machine.... all works a good'un now..... its all about the sequence of events and putting them in the correct order.... 🙌

Any chance you can repost a few links? "Wideband mod program and manuals etc available here". are broken. Thanks.

@nickpatzke8315

4 жыл бұрын

agreed! did you find it?

@twohandsandaradio

4 жыл бұрын

Google works wonders on all your questions.

CORRECTION Wide band is 25 Kc Not 12.5 Kc at 9:23 (WIDE = 25 Kc MID = 20 Kc NARROW = 12.5 Kc )

look the same as midland . BUT GOOG QUALITY ? DBR2500

Just wondering if this radio same as CRT MICRON as it looks like same radio

@knoxieman

4 жыл бұрын

Yes very likely, they rebadge all the time in China, this chassis is used.for 4m radio and CB as well.

what kind of antenna do u use for this radio

@knoxieman

4 жыл бұрын

Diamond I think

You show how to program the channel names but for the life of me I can't get them to display. Anyone know how to do that?

@birdhousetv6473

4 жыл бұрын

Its in the software.

@theyareouttogetme1

4 жыл бұрын

Theres an option in the menu after holding down "function" to display either freq,name or channel .

Everytime i press the v/m p2 button it comes up error any ideas ? Also i followed your instructions to add some freq and it just says band error cannot write . I think its a faulty radio as its brand new .

@knoxieman

4 жыл бұрын

Hi yes I have heard some of the later ones have had an issue you will need to contact the seller.

@saltire546

4 жыл бұрын

@@knoxieman Sent it back to M/L after speaking to a sales rep who was convinced i was doing something wrong , i took a note of the ser number so i will see what they do, this is always a good indication of how a shop treats its customers .I was already hacked off when i bought a new 7300 only to find out in the invoice that the speaker was going to be 2 months before delivery might have been nice to have been told this when i dropped over a grand on a new radio .

Does anyone know if this radio has a Rodger beep setting?

@knoxieman

2 жыл бұрын

No it doesn't

QUESTION ??? HOW MANY AMPS DOES MY POWER SUPPLY JAVE TO BE FOR A 778UV ?? 73 Danny KI4TRP

@knoxieman

3 жыл бұрын

20A should be enough, I have it on a 30A supply

it starts at 1:11

What is "RDW"?

@bebopbassist1

3 жыл бұрын

Receive Dual Watch. When enabled it allows you to monitor two different channels simultaneously.

@grigorirasputin5020

3 жыл бұрын

@@bebopbassist1 Thank You!

Dont put it under your seat !! except in winter .