Another washing machine left on the KERB: let's see if it works: Indesit IWDC6125 rinse spin test

Тәжірибелік нұсқаулар және стиль

This washing machine (washer Dryer) was left on the kerb for removal.
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 56

  • @mielefan487
    @mielefan4872 жыл бұрын

    Put a little bearing grease on the belt running surface and this squeaking should go away

  • @washertech
    @washertech2 жыл бұрын

    My zanussi makes that same creaking noise, it’s something to do with the belt. I was going to replace it on mine but I’m not really bothered by it as it goes away after a while of washing

  • @Mitch-Hendren
    @Mitch-Hendren2 жыл бұрын

    I had the exact same machine spun great empty but under load the bearings made that same noise, tightened belt was ok for a while but then bearings started making the same noice . Eventually the drum Would jam and belt slip off bit of spray grease on bearings itd do a few more washes . It did 11 years so not that bad for a modern machine awful at spinning very fussy on slightly unbalanced loads . Sealed drum so bearings couldn't be replaced. Bought a second hand miele for €120 love it !! Sooooo quiet !

  • @GeniusSL
    @GeniusSL2 жыл бұрын

    The creaking is just the belt, had a machine doing that too when I got it. The Bekos and the Indesit featured in this video look good enough to sell if they work imo. Or give them away, they are pretty modern machines, someone may be interested in it. Otherwise there's a good buildup of appliances again, lol

  • @commenter1291
    @commenter12912 жыл бұрын

    The creaking is due to the belt being cold and the fact the load was quite heavy, its honestly nothing to worry about. Once you do a hot wash it should dissappear.

  • @Bekolover4ever
    @Bekolover4ever2 жыл бұрын

    These are common for living on kerbs 🤣

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    Natural habitat for an indesit

  • @leebox9911
    @leebox9911 Жыл бұрын

    Got the same washer dryer Mine was not draining the water out was all blocked up!!!!

  • @MisterBrownJack
    @MisterBrownJack2 жыл бұрын

    That belt noise it's making is normal since that's the sound of the belt sliping slightly which my Hotpoint Smart Tech does the exact same thing sometimes

  • @mrlaundry101
    @mrlaundry1012 жыл бұрын

    The 10yr warranty is just parts… which is the cheap part of a repair but you still have to pay for labour which is easily hundreds. The full warranty is just 1yr as it’s Indesit quality

  • @laundrylad2006
    @laundrylad20062 жыл бұрын

    These washer dryers are amazing! I’ve got a hotpoint one and it’s really good

  • @Zainwhocamefromspain

    @Zainwhocamefromspain

    6 ай бұрын

    I got a question which active care is better? the one with the full LCD display or the normal one with the yellow screen?

  • @benthebossjackson4388
    @benthebossjackson43882 жыл бұрын

    Looks in great nick - its less then 10 years old for sure! usually they work good, and it did sound rickety but i think thats just the dryer housing loose maybe. i would suspect it works great, and its just the heating element on dryer thats failed... it will run the dryer but probs cold. run the dryer see if it gets hot. the other thing is run the 90 cycle... if it runs fine. then its works great.. watch out for all the lights flashing.

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    What does it mean if all the lights are flashing. It did that in the next wash.

  • @ACCOUNTISNOTINUSE456

    @ACCOUNTISNOTINUSE456

    2 жыл бұрын

    @@bootsowen if the lights flashing this mean that the washer got an error

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    But what is the error?

  • @rolfzetterberg971
    @rolfzetterberg9712 жыл бұрын

    Has to be belt noise.My Siemens (4 years old?)has exactly the same noise now and then.Spray something(water,window cleaner) on the belt to see if it goes away.Perhaps it's the belt "climbing" on the ridges?If so,I wonder if it's possible to move the belt position one step on the motor pulley.Perhaps that jhelps.I'll try it on mine the next time it occurs. Or simply turn the belt half a turn around? I would first try rubbing a wax candle against the belt.

  • @charleysmith7565
    @charleysmith75652 жыл бұрын

    This has happened to me in the past and I think the engineer had adjusted the motor a bit which did something. A possible solution to look at there Side note: I noticed when it's full of water, as the drum is stopping, the creaking isn't present, so the cause of the creaking as I suspected is likely in the motor

  • @debsoconnor4122
    @debsoconnor4122 Жыл бұрын

    I have one and the lock light keeps coming on and won't work any ideas

  • @thelaundrycookie1200
    @thelaundrycookie12002 жыл бұрын

    it's normal that it was going into spin then stopping and tumbling again, and repeating this for 10 minutes or so. i have an indesit like this, and it does exactly the same. it's just how they're programmed.

  • @BespokeLad1400
    @BespokeLad1400 Жыл бұрын

    For me it looks like the pcb has gone crazy. That's why it jumps to other cycles too! The led indicator on dry is on bcz the machine jumps from wash directly to dry and thats why the machine blinks as well for the dryer its normal to blow cold air cuz it has water

  • @funfairrides5409
    @funfairrides54092 жыл бұрын

    That creaking noise is the belt it probably needs changing

  • @balfie18
    @balfie18 Жыл бұрын

    Hey boots, these are the springs I was telling you about couple of weeks ago, ya talk about them at 3:05.

  • @andrewcutajar6221

    @andrewcutajar6221

    Ай бұрын

    How are they removed, please?

  • @callywaly209
    @callywaly2092 жыл бұрын

    Bosh and lg ar very good

  • @andrewcutajar6221
    @andrewcutajar6221Ай бұрын

    This morning I got an IWDE 7125, and I couldn't get the concrete off in any way, due to those springs you mentioned at 3:05. How to I get them off, please?

  • @bootsowen

    @bootsowen

    Ай бұрын

    Hi, you have to try to unscrew them, but they are tight, so try to get the upper end into the centre with a screwdriver or something and then get a small needle nose vice grips onto it, then twist it out like a screw. Good luck, theyre not meant to come out.

  • @mikigry9838
    @mikigry98382 жыл бұрын

    I think belt is loose and it either needs to be replaced or tensioned

  • @mrwasherguy4948
    @mrwasherguy49482 жыл бұрын

    The belt is normal if you do a 90 degreases boilwash it might go out its because of the cold and if you put som wd 40 for plastic ond the belt it will go fine

  • @mielekid.w1613
    @mielekid.w16132 жыл бұрын

    I think it’s because of the fact they were using rinse and it was washing badly. Although I saw one that people were using fastwash on aswrll

  • @Motherboard686
    @Motherboard6862 жыл бұрын

    That's the noise of the belt slipping on the motor pulley. Touch a dry bar hand soap to the inner part of the belt while it's running and the noise should just disappear right away!

  • @TheMRStasikk
    @TheMRStasikk2 жыл бұрын

    Maybe it's a motor issue. You say, that it was about 10 mins in a distribution phase, and couldn't spin, also I noticed that when it starts spinning, it seems it slows down, then it notices and ramps up again and still slows down a little. Judging by the sound, ofc. The crackling noise is only when the tub full of water. Maybe the problem with brushes, because the board sends too much power to rotate it. Just my guesses.

  • @Motherboard686

    @Motherboard686

    2 жыл бұрын

    It's does spin bursts :)

  • @edwardtrickett6064
    @edwardtrickett606411 ай бұрын

    How wasteful! Still, free washing machine!!

  • @mielekid.w1613
    @mielekid.w16132 жыл бұрын

    Oh. What happened to the other iwc? I mean seems ok

  • @myoldblomberg4945
    @myoldblomberg49452 жыл бұрын

    Love the wma. 😍

  • @CarwashMairhuber
    @CarwashMairhuber2 жыл бұрын

    These Indesit's do 2-3 Rinses on ``extra rinse´´

  • @theoddjobcentre6686
    @theoddjobcentre66862 жыл бұрын

    Silver one is from 2004

  • @evangelineross6516
    @evangelineross65162 жыл бұрын

    I need some help for my brand new electrolux automatic washing machine..220 volts 50 Hertz power is good but not working

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    What help do you need

  • @tobiasjelen8121
    @tobiasjelen81212 жыл бұрын

    Kannst du bitte wieder neue Video ein Bosch wfp3300 machen danke bitte

  • @arcfa2267
    @arcfa22672 жыл бұрын

    You may use the beko 7kg as one of your daily drğvers to compare it with bosches’ I think it won’t last for too long

  • @theoddjobcentre6686
    @theoddjobcentre66862 жыл бұрын

    Don't think it's even 10 years old yet

  • @robinrother4230
    @robinrother42302 жыл бұрын

    The funny Sound is comming from the belt should you do some unbalanced spin viedeos? I realy like your bot channels

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    Bot channels?

  • @robinrother4230

    @robinrother4230

    2 жыл бұрын

    @@bootsowen bootsowen and wash smash👍

  • @MrLumination
    @MrLumination2 жыл бұрын

    Do you still have the indesit moon?

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    Yes

  • @LaundryGuy1500
    @LaundryGuy15002 жыл бұрын

    A metal pulley on an indesit?

  • @laundrylad2006

    @laundrylad2006

    2 жыл бұрын

    All titanium drums or washer dryers have metal pulleys.

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    What does titanium mean?

  • @mr.gorenje7824

    @mr.gorenje7824

    Жыл бұрын

    @@bootsowenthis indesit Had a titanium Drum. Sad its scrapped

  • @LaundryLad1400
    @LaundryLad14002 жыл бұрын

    From the date it looks like 2018

  • @bootsowen

    @bootsowen

    2 жыл бұрын

    That sounds about right, I thought 2012 was too old

  • @LaundryLad1400

    @LaundryLad1400

    2 жыл бұрын

    @@bootsowen yeah, considering these are made just after the recall lol

Келесі