#WoodworkingGuide An unexpected result wood recycling ★Thank for watching! ★Please like, share, and subscribe our Channel here:
Жүктеу.....
Пікірлер: 275
@terry7491 Жыл бұрын
Wood glue has left the chat
@maxwellgriffith
Жыл бұрын
Structural everything has followed out the door
@ookie4179
11 ай бұрын
lol my OCD was crying this whole body
@jimeverden2244
10 ай бұрын
Yup, can't see it lasting long at all.
@KattarHinduLadki
9 ай бұрын
@@ookie4179so sad for you 💀💀💀💀
@rileyrichmond7321
7 ай бұрын
Dont need wood glue for everything, do lot of wood jointing and its so tight fit shouldnt need glue
@jakethecarpenter7795 Жыл бұрын
Titebond three goes along way my friend!
@nicebubbles Жыл бұрын
Would hold better if it was held together with bubble gum 👍
@user-go3ey6th2c
Жыл бұрын
Ж
@TheAvarutoFans
Жыл бұрын
Ahahaha
@dennistscherkaschin2346
Жыл бұрын
😂😂😂
@juseschrustfush
Жыл бұрын
Itd be more delicious
@lizm3652 Жыл бұрын
Como siempre maestro ... Muy bello su trabajo! Muchas Felicidades! 👏
@thanhcongcuocsongoithuong9 ай бұрын
Nhìn anh thợ làm thấy mê quá.máy móc quá hiện đại ❤❤❤❤❤❤
@FrancisoDoncona Жыл бұрын
It’s just pinned together, honestly has it broken yet?
@austen9556
Жыл бұрын
The nails could be bigger then finishing nails
@JoseLuna-it9ok
Жыл бұрын
0
@docolemnsx
Жыл бұрын
Hey I get the idea, it's way easy for a youtube video and he can reuse the wood! Actually the design is looking good, so if you throw some PU glue and some screws at it, it's sure af gonna be a sturdy bench if it holds on pins! Also, in case you also missed this, OP can reuse the wood for other projects :)
@stephenstrader1577
Жыл бұрын
Those are literally pin nails… meant to be used for light trimwork installation (ie crown molding on cabinetry only, trimwork outside corners, etc). Those little nails are NOT AT ALL made to withstand the elements or being embedded in the pressure/chemical-treated wood that he was building with… they’ll rapidly disintegrate to nothing. They look decent though!
@austen9556
Жыл бұрын
@@stephenstrader1577 that woods not pressure treated and all tho I wouldn’t use finishing nails to build that there’s only one part that’s structural and it’s held together with screws the part that supports the seat
@arthilliker3721 Жыл бұрын
I'm going to make some to sell but I always use the small headed deck screws on my projects so they can't fall apart. Little longer to build but will last a lifetime !!
@docolemnsx
Жыл бұрын
I guess these pins are good for throwing up a quick and easy YT short. I kinda like the design, too.
@user-dn4vp9mv3v
3 ай бұрын
0@@docolemnsx
@Buildbeautiful Жыл бұрын
Looks great i use pilot holes and screws but it takes longer to make
@cw1222 Жыл бұрын
great job ♥️
@lambertois1111 ай бұрын
Good work and good ideas!!
@zulkarnainshinn2307 Жыл бұрын
Nice looking, deadly simple.
@shannoncassidy2422 Жыл бұрын
Beautiful craftsmanship!
@susieq238 ай бұрын
Excellent I want to build one... I love it!
@victoriasoto5332 Жыл бұрын
Guauuuuu. Sin palabras. 🤗👍🌻👌🤗 VICKY-CHILE
@denisebatista7217 Жыл бұрын
Magnífico sensacional! Talento dom é tudo , e vc está de Parabéns! 🙌🙏👏👏👏👏💯💯💯💯
@DomaskConstructionАй бұрын
Great job!
@e.mcclain1171 Жыл бұрын
It looks good, but I don't think it will last long outdoors. Pins and a few screws 🤔
@nelsonandremulhule6228
Жыл бұрын
I think it's jus a demonstration. You can do better
@beatrizstollmoraes62164 күн бұрын
So beaultiful!!!! ❤❤❤❤
@josemanuelexitosoalvap9104 Жыл бұрын
Que bonita quedo
@ToyoIto-design-home Жыл бұрын
很酷🎉🎉
@taironmiranda846 Жыл бұрын
Aguanta el peso? Muy débil la unión que tiene la banca. Decorativamente está bien. Saludos
Karen, don’t build one like this FFS.. you’ll end up injured. The tiny brads used in this with zero glue holds means this will fall apart quicker than an Ikea product that you forgot to put the screws in.
@erguntulay2790 Жыл бұрын
Good Job
@marcoangulorodriguez18008 күн бұрын
I'm a wood crafter beginner I appreciate your videos it helps me alot thanks for sharing your knowledge
@woodworkingguide6356
4 күн бұрын
Thanks you
@joseescobedo5347 Жыл бұрын
Mmmmjmmm, great idea, just need ti invite the right glue portón
@alexmouchmoucherek72819 ай бұрын
Beautifull
@djtblizzleКүн бұрын
Gorgeous work! Plans?
@WoodworkVietNam.officialАй бұрын
Woodworking good
@valdissedias2756 Жыл бұрын
Maravilhoso parabéns 👏👏 👏
@larezzatruman80972 ай бұрын
Cute kitty
@Gertruda-zh7ic5fz8z2 күн бұрын
Отлично получилось🎉🎉🎉
@BarjoNurfajar9 ай бұрын
Sangat menakjubkan
@allenuic Жыл бұрын
I wonder how the bench will hold with those indoor screws
@bretmartin1305
11 ай бұрын
You are wondering about the the screws? 🤔 I'm more concerned about the finishing trim nails holding the whole thing together lmfao 🤣...i guess you missed the first and middle part of the video 🤦
@TheDogLife522514 күн бұрын
Perfect length to get the idea. I would add cross support at the bottom to hold the planter bottom boards more securely.
@kasiakatarzyna3928 Жыл бұрын
Świetny pomysł ale ja bym na tym nie siadała 😅😅 przydałby się lepszy montaż
@DreamSmuggler Жыл бұрын
Me, blinking away for a second and missing the final product... Three times in a row🤦
@siriwardanapushpakumara337
Жыл бұрын
Mumara
@GrandmasterLix Жыл бұрын
Very nice! But how did you build the cat? That's what I want to know.
@paulmallon8823 Жыл бұрын
No chance that holds more than 1 person
@osvaldosilva85253 күн бұрын
Lindo lindo 😍🤩😍🤩
@elianebrandao22811 ай бұрын
Gostei dessa pistola! É uma pistola de pregos ou grampos?
@teresinhasantosribeiro Жыл бұрын
Muito lindo parabéns Deus abençoe 👏
@ericore674 ай бұрын
Très très beau résultat. Bravo.
@BigBrownCar Жыл бұрын
Concept: A. Construction: F.
@CREATiV8365 ай бұрын
عمل رائع❤
@TtTt-eh6glАй бұрын
Love it
@wendydawn4375 Жыл бұрын
Be sure to weather seal them...
@jhoncabrera8788 Жыл бұрын
Muy lindo trabajo ☺️
@dilawarsabri5769 ай бұрын
Good ❤
@blackthornknives Жыл бұрын
Good job!
@WoodworkingTH2 ай бұрын
Good job bro
@denisem543710 ай бұрын
I love love love
@papillon407ify Жыл бұрын
こんなに立派な道具使ってこれでは…
@luizcarlosfernandes3613Ай бұрын
Legal parabéns obrigado vou tentar amo marcenaria
@yeimunoz7980 Жыл бұрын
Hermoso 😊❤
@SergioAlejandroGonzalezGomez2 ай бұрын
Woooow que Bonito lo quiero hacer
@dhery5110 ай бұрын
It’s amazing what you can do with $1000’s or maybe $10,000 worth of wood working tools made with oil and mind minerals. 😮
@NeanderthalDogma
3 ай бұрын
Lmao he used under $300 worth of tools bud
@marianagabel836110 ай бұрын
beautiful
@nelsonandremulhule6228 Жыл бұрын
Good
@evandromatos_portaldamata20 күн бұрын
Taça fogo 🔥 🔥 🔥
@damianluby8973 Жыл бұрын
Nice build but why was the result unexpected? Did you not plan to make this?
@andreaalejandraarias4661 Жыл бұрын
Qué lindo 😍👏👏💪 gracias por compartir 🍀
@lukondomwambula2593Ай бұрын
Nice work ❤❤❤
@ocanaldomomento Жыл бұрын
Gostei muito
@franciscoalvarez3584 ай бұрын
Hermoso.
@vicsarАй бұрын
Beautiful.
@woodworkingguide6356
Ай бұрын
Thanks you
@betomartinez63904 ай бұрын
Excellent design but it needs reinforcing and exterior glue to be structurally sound.
@gradewood5 ай бұрын
Good... Hi im from Indonesia
@woodworkingguide6356
5 ай бұрын
Thanks you
@Farage528 Жыл бұрын
Very nice 👍
@PattysReviews4YouАй бұрын
Love this
@woodworkingguide6356
Ай бұрын
Thanks you
@jeanniealford4234 Жыл бұрын
Nice, very nice.
@Budakmesin9 ай бұрын
Very nice work... 😊😊😊
@Beefeater91115 күн бұрын
I came here for all of the “expert” opinions - I wasn’t disappointed.
@akthungar Жыл бұрын
Nice job sir ji
@AndyNguyen211 Жыл бұрын
I doubt it would last 3 months in the sun
@marcosaguiar5816 Жыл бұрын
Ótima idéia 😉
@celiamartins8060 Жыл бұрын
❤👏👏👏
@ajrg1983 Жыл бұрын
Muito lindo esse trabalho
@mrtq2 ай бұрын
The sound that the wood cutter makes is very pleasant to the ears. I love it
@woodworkingguide6356
2 ай бұрын
Thanks you
@tarcilenelaurentino4473 Жыл бұрын
❤❤❤👏👏👏👏👍👍👍👍
@leylabora11713 ай бұрын
👏👏👏
@manuelvelez6740 Жыл бұрын
Perfeito.
@jersonfernandes5741 Жыл бұрын
Ótima dica, parabéns, assisto de capitão Enéas Norte de Minas Gerais, Brasil 🇧🇷
Пікірлер: 275
Wood glue has left the chat
@maxwellgriffith
Жыл бұрын
Structural everything has followed out the door
@ookie4179
11 ай бұрын
lol my OCD was crying this whole body
@jimeverden2244
10 ай бұрын
Yup, can't see it lasting long at all.
@KattarHinduLadki
9 ай бұрын
@@ookie4179so sad for you 💀💀💀💀
@rileyrichmond7321
7 ай бұрын
Dont need wood glue for everything, do lot of wood jointing and its so tight fit shouldnt need glue
Titebond three goes along way my friend!
Would hold better if it was held together with bubble gum 👍
@user-go3ey6th2c
Жыл бұрын
Ж
@TheAvarutoFans
Жыл бұрын
Ahahaha
@dennistscherkaschin2346
Жыл бұрын
😂😂😂
@juseschrustfush
Жыл бұрын
Itd be more delicious
Como siempre maestro ... Muy bello su trabajo! Muchas Felicidades! 👏
Nhìn anh thợ làm thấy mê quá.máy móc quá hiện đại ❤❤❤❤❤❤
It’s just pinned together, honestly has it broken yet?
@austen9556
Жыл бұрын
The nails could be bigger then finishing nails
@JoseLuna-it9ok
Жыл бұрын
0
@docolemnsx
Жыл бұрын
Hey I get the idea, it's way easy for a youtube video and he can reuse the wood! Actually the design is looking good, so if you throw some PU glue and some screws at it, it's sure af gonna be a sturdy bench if it holds on pins! Also, in case you also missed this, OP can reuse the wood for other projects :)
@stephenstrader1577
Жыл бұрын
Those are literally pin nails… meant to be used for light trimwork installation (ie crown molding on cabinetry only, trimwork outside corners, etc). Those little nails are NOT AT ALL made to withstand the elements or being embedded in the pressure/chemical-treated wood that he was building with… they’ll rapidly disintegrate to nothing. They look decent though!
@austen9556
Жыл бұрын
@@stephenstrader1577 that woods not pressure treated and all tho I wouldn’t use finishing nails to build that there’s only one part that’s structural and it’s held together with screws the part that supports the seat
I'm going to make some to sell but I always use the small headed deck screws on my projects so they can't fall apart. Little longer to build but will last a lifetime !!
@docolemnsx
Жыл бұрын
I guess these pins are good for throwing up a quick and easy YT short. I kinda like the design, too.
@user-dn4vp9mv3v
3 ай бұрын
0@@docolemnsx
Looks great i use pilot holes and screws but it takes longer to make
great job ♥️
Good work and good ideas!!
Nice looking, deadly simple.
Beautiful craftsmanship!
Excellent I want to build one... I love it!
Guauuuuu. Sin palabras. 🤗👍🌻👌🤗 VICKY-CHILE
Magnífico sensacional! Talento dom é tudo , e vc está de Parabéns! 🙌🙏👏👏👏👏💯💯💯💯
Great job!
It looks good, but I don't think it will last long outdoors. Pins and a few screws 🤔
@nelsonandremulhule6228
Жыл бұрын
I think it's jus a demonstration. You can do better
So beaultiful!!!! ❤❤❤❤
Que bonita quedo
很酷🎉🎉
Aguanta el peso? Muy débil la unión que tiene la banca. Decorativamente está bien. Saludos
I love this planter bench!
@woodworkingguide6356
11 ай бұрын
Thanks you
@Wood201
8 ай бұрын
kzread.info/dash/bejne/g3touM-cZKqYqdI.htmlsi=kwBJxGwh8adYrODp
@aileronsintowind6835
Ай бұрын
Karen, don’t build one like this FFS.. you’ll end up injured. The tiny brads used in this with zero glue holds means this will fall apart quicker than an Ikea product that you forgot to put the screws in.
Good Job
I'm a wood crafter beginner I appreciate your videos it helps me alot thanks for sharing your knowledge
@woodworkingguide6356
4 күн бұрын
Thanks you
Mmmmjmmm, great idea, just need ti invite the right glue portón
Beautifull
Gorgeous work! Plans?
Woodworking good
Maravilhoso parabéns 👏👏 👏
Cute kitty
Отлично получилось🎉🎉🎉
Sangat menakjubkan
I wonder how the bench will hold with those indoor screws
@bretmartin1305
11 ай бұрын
You are wondering about the the screws? 🤔 I'm more concerned about the finishing trim nails holding the whole thing together lmfao 🤣...i guess you missed the first and middle part of the video 🤦
Perfect length to get the idea. I would add cross support at the bottom to hold the planter bottom boards more securely.
Świetny pomysł ale ja bym na tym nie siadała 😅😅 przydałby się lepszy montaż
Me, blinking away for a second and missing the final product... Three times in a row🤦
@siriwardanapushpakumara337
Жыл бұрын
Mumara
Very nice! But how did you build the cat? That's what I want to know.
No chance that holds more than 1 person
Lindo lindo 😍🤩😍🤩
Gostei dessa pistola! É uma pistola de pregos ou grampos?
Muito lindo parabéns Deus abençoe 👏
Très très beau résultat. Bravo.
Concept: A. Construction: F.
عمل رائع❤
Love it
Be sure to weather seal them...
Muy lindo trabajo ☺️
Good ❤
Good job!
Good job bro
I love love love
こんなに立派な道具使ってこれでは…
Legal parabéns obrigado vou tentar amo marcenaria
Hermoso 😊❤
Woooow que Bonito lo quiero hacer
It’s amazing what you can do with $1000’s or maybe $10,000 worth of wood working tools made with oil and mind minerals. 😮
@NeanderthalDogma
3 ай бұрын
Lmao he used under $300 worth of tools bud
beautiful
Good
Taça fogo 🔥 🔥 🔥
Nice build but why was the result unexpected? Did you not plan to make this?
Qué lindo 😍👏👏💪 gracias por compartir 🍀
Nice work ❤❤❤
Gostei muito
Hermoso.
Beautiful.
@woodworkingguide6356
Ай бұрын
Thanks you
Excellent design but it needs reinforcing and exterior glue to be structurally sound.
Good... Hi im from Indonesia
@woodworkingguide6356
5 ай бұрын
Thanks you
Very nice 👍
Love this
@woodworkingguide6356
Ай бұрын
Thanks you
Nice, very nice.
Very nice work... 😊😊😊
I came here for all of the “expert” opinions - I wasn’t disappointed.
Nice job sir ji
I doubt it would last 3 months in the sun
Ótima idéia 😉
❤👏👏👏
Muito lindo esse trabalho
The sound that the wood cutter makes is very pleasant to the ears. I love it
@woodworkingguide6356
2 ай бұрын
Thanks you
❤❤❤👏👏👏👏👍👍👍👍
👏👏👏
Perfeito.
Ótima dica, parabéns, assisto de capitão Enéas Norte de Minas Gerais, Brasil 🇧🇷
Love it ❤
Hermoso
nice. Needs wood glue besides the screws.
Good working
Awesome
Что-то садиться на него страшновато
Wood work
Is that a finish nailer or a brad nailer ?
Soy de Almería y soy primo de David visbal
❤❤
👏👏👏👏👏👏
Longevity 😂
Very cool
Wow
Nice work sir
Eu amei!
Head less pin nails no glue and 5 screws is crazy
I need all of this tool God 🙏
@woodworkingguide6356
6 ай бұрын
Thanks you