Oh and by the way, I know you are meant to suck on drinking straws to pull the water through, but the design is still bad.

@danijellukic2196

6 жыл бұрын

Make my design and show to people , it's still better than this american thing . . .

@danijellukic2196

6 жыл бұрын

Idk dude

@angrydrawings3910

6 жыл бұрын

My GP-7 can remove 3 out of the 5 easily, but the bottom two are different.

@angrydrawings3910

6 жыл бұрын

snark567 it is possible, I just don't want to have to put it back on.

@angrydrawings3910

6 жыл бұрын

snark567 yeah, that is weird.

The proper use of the drinking tube requires you to blow into the tube to introduce air into the canteen. The pressure will force water into your mouth through the tube. You can also help by squeezing the canteen to force water into your mouth. I assume the Russian canteen works the same way as the US version.

@Weaponsandstuff93

6 жыл бұрын

It should but the Russian canteen haemorrhages water around the seal due to the quality of Soviet parts in the late 1980s.

Does the Soviet canteen contain asbestos?

@thetupolevtu-1602

6 жыл бұрын

yes No it doesn't but if are to use it just clean before use

@Weaponsandstuff93

6 жыл бұрын

No but mine has some sort of horrid mould on the inside.

@stanleynickjedrzejczyk4533

6 жыл бұрын

Een Matka Rossiya, green asbestos canteens are made een Chernobyl, and dey dreenk from YOU!

@wojtekepecki5774

6 жыл бұрын

maybe just clean it 🤔🤔🤔

@rxleurn

2 жыл бұрын

it contains vodka.

I never knew that drinking tubes even existed, interesting how people thought about hydration while gasmask is on even though it is flawed.

@Weaponsandstuff93

6 жыл бұрын

In theory they are a great idea and some masks do have good systems, my Avon canteen connector has arrived now so I can test my S10 etc with the hydration system. The big problem with drinking tube connectors though is how quickly a lot of masks were rushed to take them, for example the American and Soviet systems would work far better if the canteen lid had a straw in it that went to the bottom of the bottle, that way you could suck the water out without holding the canteen upside down.

Why the british small mammals poster?

@Weaponsandstuff93

6 жыл бұрын

Why not.

Never managed to drink any single drop of anything through my GP-7v, I squeezed and pressed so hard that I managed to somehow make the rubber of the canteen fail and somehow break the mechanism...

@Weaponsandstuff93

6 жыл бұрын

Typical late Soviet quality control.

@incognitoanonymous3706

6 жыл бұрын

How have you managed to date it anyway ? There's a bunch of numbers on the cheek of mine but I dunno which is the one I should read...

@Weaponsandstuff93

6 жыл бұрын

The two digits that correspond with a year such as 87 etc.

@incognitoanonymous3706

6 жыл бұрын

Oh, thanks, so mine's 92. :)

@nondescripthandle212

3 жыл бұрын

@@incognitoanonymous3706 so is mine!!

The Czech M10M has an extremely similar system but with a very hard to use plug on their plugs. You should try using one of the Czech canteens with the plug the mask comes with.

@Weaponsandstuff93

6 жыл бұрын

I have a Czech bottle cap, dunno if it will fit any of my canteens.

This channel deserves more subs/views

@Weaponsandstuff93

6 жыл бұрын

Cheers

@winteranddoge3764

6 жыл бұрын

Yeah for the quality of the vids definitely deserves 10 million or at least 100 thousand

Russian on canteen was saying 0,75 litre that's pretty much it and nice video as usual.

@Weaponsandstuff93

6 жыл бұрын

Okay thanks for the info, shame they didn't design a stronk Soviet bottle.

I was waiting for a drinking tube video I wish that it was a bit of a better system. Nice video tho

@Weaponsandstuff93

6 жыл бұрын

When my Avon one comes we'll see if that's better.

So are industrial ABEK-P filters essentially NBC filters? Can they protect against nerve agents such as VX?

@Weaponsandstuff93

6 жыл бұрын

I've answered that before but Yes, if you want more details search ABEK on my channel and look at the videos where I explain it. Nuclear and Biological threads are stopped by the Particulate filter (P), chemical threats are stopped by a vapour filter, ABEK covers about 95%+ of normal chemical threats.

I don't know if you were doing this for the PMK, (I can't vouch for the others) but to drink from it, you have to push the connector into the canteen adapter while sucking on the mouthpiece on the inside the mask to drink without problems. Feel free to correct me if you were doing that already, but yeah, it is a weird design

@Weaponsandstuff93

6 жыл бұрын

Read my pinned comment, I know that's technically how it's meant to work but the connections are really dodgy, half the time water flows around the tube not into it. The issue is as well, for the flow to work properly the bottle needs to be upside down, as the drinking straw doesn't go to the bottom of the canteen, while holding it upside down the connector will keep falling out.

I got the exact same canteen but the rubber in it was rotted and hard a plastic so it wouldn't create a seal, do u know any canteens that have the same canteen nozzle/cap that the gp7 can attach to preferably a modern one

@Weaponsandstuff93

6 жыл бұрын

I'm pretty sure American canteens up until recently used this system.

@lunashumaker8315

5 жыл бұрын

I have a Czech canteen that and my m10m came with the gas mask canteen lid and it seals just fine

Do the russian canteens work with vodka?

@Weaponsandstuff93

6 жыл бұрын

They "work" with any liquid.

@jort93z

6 жыл бұрын

you are right. Calling that "working" is a little bit of a stretch.

@oliverfasola19

4 жыл бұрын

Vodka exclusively

Drinking straw help, sucking on the straw full create a vacuum so if you blow air into the canister for water the water will flow.

my shalon 4a1 has a drinking tube and I'm wondering if it's even safe to drink through.

@Weaponsandstuff93

6 жыл бұрын

It's safe to use but I'd advise spitting the water out a few times in case anything nasty is in the tube before actually drinking from it.

@thepanzer9355

6 жыл бұрын

Weaponsandstuff93 alrighty thanks

What about the 4a1 straw

I've got an old Zivilschutzfilter and they look very similar to I think it's the Israeli gas mask. However on those ones they have a little bit on the right cheek. What is that?

@Weaponsandstuff93

6 жыл бұрын

Do you mean the mask? I'm pretty sure a filter doesn't have writing on the mask.

@westongraham1030

6 жыл бұрын

Weaponsandstuff93 Yes I meant the mask, the filter says Zivilschutfilter 68. The mask itself looks similar to the Israeli kind. However on my mask it's missing a bit on the cheek. It looks like some sort of exhale valve but I'm wondering if it's an Israeli mask or not.

@Weaponsandstuff93

6 жыл бұрын

No it's most likely a German civil defence mask from the 1950/60s, but you could have a random filter paired with a random mask. See if it's a mask from this list. www.gasmaskking.com/german-gas-masks

@westongraham1030

6 жыл бұрын

Weaponsandstuff93 Okay from what I can tell that's what it is, thank you. It didn't appear to be on that list though. Maybe I was looking in the wrong area but it wasn't under the German category. Thanks for the help though and keep up the good videos!

Nice vid and thanks for the info above

@Weaponsandstuff93

6 жыл бұрын

No problem.

Also with my gp5 I found one on amazon and it had no talcum power or the soviet filter

@Weaponsandstuff93

6 жыл бұрын

Cool

@angrydrawings3910

6 жыл бұрын

Shawn Bilka I got a GP-5 as well in Amazon, but it came with an Israeli filter.

Is the Shalon 4a1 drinking system good?

@Weaponsandstuff93

4 жыл бұрын

It's fine

Where or how to get gas masks publicly I'm not talking about online if your confused or something

@Weaponsandstuff93

6 жыл бұрын

Army surplus stores.

I have both a M40 and a MSA millennium and both of the drinking tubes always rub against my lips and face. It’s one of my big pet peeves on the millennium the tube won’t swivel so I can’t move it

Hey Liam i have my soviet mask with a camelback to connect to my tactical vest your right them little canteens aint worth the hassle.so i have camelback with 3ltrs of water on the vest,inside the vest i have a bivvy bag and an orange space blanket where the plates go the mask just hangs there ready for use anytime.The bottle holder on the vest i have a solar,wind up radio and 2-2way radio`s.

@Weaponsandstuff93

6 жыл бұрын

Sounds like a good setup.

Here I have one question .. We all know that the water inside from the straw is not completely dried after use. After a long time, moss will grow... That kind of military gas mask How to deal with the remaining water in the drinking pipe after it is used.. How can the hole be cleaned if it is too small... Or everyone doesn't need to clean it up?... Just leave it? I don’t want my PMK to taste like fish pond... I hope it can be answered

Are there any gas mask with 3 filters?

@Weaponsandstuff93

6 жыл бұрын

I think there's a couple that have 3 filter ports and blanking plugs.

Is storing gas masks in boxes ok?

@Weaponsandstuff93

6 жыл бұрын

As long as it's not damp or in sunlight yes.

@lappbricks3995

6 жыл бұрын

Ok great thanks

CT-12s are harder to find over here than FM-12s. The drinking tube gets in the way and annoys me. I really hate the drinking tube port on my Izzy M-15. I use a hose so the filter doesn't get in the way of my rifle, but the damn drinking port is on the right side and sticks out so far it screws up what would just about be as perfect a cheek weld as you could get with a mask. They did the same thing on the Shalon 4A1. WTF?

@Weaponsandstuff93

6 жыл бұрын

It's so it's easy to stick the thing in your mouth but yeah, CT12s are harder to find than FM12s anyway because they were made in smaller numbers for armed police/SWAT/Special forces etc who want a very basic but competent mask. With both the S10 and FM12 you should be able to adjust the lever so the drinking tube is out of the way, you're meant to cut them to length as well, I hated the drinking tube on my S10 until I cut the end off, now it swings out better and is easier to grasp with my mouth.

@BigBosley

6 жыл бұрын

I might trim it, but the way the FM-12 rotates out of the way it never really bothered me from the inside, but it does seem like an unnecessary potential ingress point. I'm tempted to cut off both ends and plug the holes and melt the rubber over on the ends for a good hermetic seal. As a civilian I'm never going to use the tube, and I'm critical of the military's (or AVON's) motivation to keep it in the design. I mean if you were in the Gulf War and seeking protection from well fires and needed hydration because you were holding position I could see it. If under attack with Chem/Bio agents it makes sense to displace rather than risk contamination from drinking. It’s like the US Military is fond of saying:” There’s the right way, the wrong way, and the Army way.” I’m sure that’s true of most militaries, but what do I know, I'm an Accountant?

@Weaponsandstuff93

6 жыл бұрын

I'd agree for the most part with you, I'm not a big fan of them due to as you say far more risk of contamination etc.

merry christmas

@Weaponsandstuff93

6 жыл бұрын

Thanks. Same to you from a few days ago.

you own a pmk s?

@Weaponsandstuff93

5 жыл бұрын

Nope

Yeah i have a american canteen and it works fine with my m40 and it uses the same system like the mcu2p so its the canteen what isnt good

Great video!

@Weaponsandstuff93

6 жыл бұрын

Thanks.

I need to get a gp5m so people can hear me😂

I have an Idea for a way to eat while in a gas mask, theres a box somewhere in the front of the mask that opens and when it closes it creates an airtight seal. There is another door on the inside that can be opened and then the food can be eaten but this wouldn't work in environments where the foodwould be contaminated if it came into contact with the air

@okkid7311

6 жыл бұрын

To fit much in, itd have to be quite bulky

@Weaponsandstuff93

6 жыл бұрын

Why not just have liquid food in a canteen.

@ChucksSEADnDEAD

6 жыл бұрын

Forget about the food being contaminated, if your airtight chamber had to be opened to let food in, then contaminated air would enter as well. As soon as you opened the second stage to take a bite you'd be doomed. Considering how long filters are supposed to last in contaminated areas, you could probably just suck it up and face the hunger. Thirst has a higher priority.

@floodstreet2961

6 жыл бұрын

Weaponsandstuff93 didnt think of that, now I feel dumb

@raymondbailey1970

6 жыл бұрын

use baby food in the canteen lovely man.

Czech M10m, I have to push the mask hard to my face to be able to reach the straw.

Love this video

@Weaponsandstuff93

5 жыл бұрын

Cheers

Maybe use the right canteen on the mcu

@Weaponsandstuff93

6 жыл бұрын

It's a universal connector.

@jerrylancaster256

6 жыл бұрын

You still may get better results with an american canteen they tend to have better ade canteens

@Weaponsandstuff93

6 жыл бұрын

As mentioned in the description, I know it's better quality but it's still a bad design, I have my Avon drinking cap coming soon which should be far better.

I have accomplished getting a wet mask 😂 that’s amazing

@Weaponsandstuff93

4 жыл бұрын

lol yeah

Why not use the Soviet canteen? Just wash it and good as new

@Weaponsandstuff93

6 жыл бұрын

Because there's some nasty stuff under the cap, mould maybe.

Hey do a video about gas mask hotdogs

@Weaponsandstuff93

6 жыл бұрын

What?

@SillyWilly02

6 жыл бұрын

Weaponsandstuff93 oh I’m sorry

@SillyWilly02

6 жыл бұрын

Ed Barnbrook no that’s illegal

Why cant u drink with it

@Weaponsandstuff93

5 жыл бұрын

Crap valves etc

The American canteens seal a lot better to the drinking tubes.

@Weaponsandstuff93

6 жыл бұрын

Yes but it's still a poor system compared to the Avon version.

apparently the pmk 2 has the same shitty facepiece, so it also has that shitty inner mask

@Weaponsandstuff93

6 жыл бұрын

So I've heard, you can just swap the filters around, the GP-9 is better in most ways ironically than the actual military mask.

drinking vodka dude

I think that getting a masks for a drinking tube is kinda pointless. I know I'm never gonna use one, if I get a mask with a drinking tube, so I don't see the point.

@Weaponsandstuff93

6 жыл бұрын

That's my thoughts on them, they are a weak point in the mask if you have no intention of using it.

Don’t be mean, the drinking tubes tried their best to work properly!

@Weaponsandstuff93

6 жыл бұрын

Let's see how my Avon system works when I do a video on it.

Good thing i didn't buy gp7v

@Weaponsandstuff93

4 жыл бұрын

Yeah no better than the standard GP-7 really

The American system has a way better design. It has a rubber seal that the tube plugs into. It stays in place. I just bought a American canteen to test it.

@Weaponsandstuff93

6 жыл бұрын

Yeah I heard that, sadly my US canteen doesn't have the correct cap.

cool gas mask video

@Weaponsandstuff93

6 жыл бұрын

Thanks

Oddly enough commie Czechoslovakia managed to make a decent drinking tube system. Well at least the one on my M10M

I can send you m10m canteen

@Weaponsandstuff93

6 жыл бұрын

I already have the M10m connection cap, I have a feeling I can attach that to at least one of my canteens.

poor mcu

Those russians really did weird things hah

@Weaponsandstuff93

6 жыл бұрын

Make a crap copy of a dodgy drinking tube system. It's a shame as I imagine the Russians would be very good at designing a simple but effective drinking system.

@andrestafur2973

6 жыл бұрын

Weaponsandstuff93 yea, but what's the year of the mask? We must take attention to variables

@Weaponsandstuff93

6 жыл бұрын

Late 80s, the PMK 1 masks are normally bad as they were made around the time of the collapse of the Soviet Union, similarly my GP-7 doesn't take filters properly because the GOST thread on it has been poorly machined.

@andrestafur2973

6 жыл бұрын

Weaponsandstuff93 i agree, it seems like they just wanted to make them faster and cheap, just like the canteen your showing us

I have one of those canteens it is 💩 crap don’t buy

@Weaponsandstuff93

6 жыл бұрын

Mine came free with the mask, I wouldn't have payed for it.

@kitkatcampbell9204

6 жыл бұрын

Weaponsandstuff93 I thought it would be good but nope old tech,thanks for replying though this Chanel should have more subs keep it up