iI'm always baffled at how some very credible manufacturers come out with great knives and the sheaths are an afterthought

@willbrink

11 ай бұрын

I got one, the sheath is ok, but not a strong point for the knife, especially at that $ point. I will likley get another sheath for it.

So can you reach out to ZT and see if they would upgrade the sheath since they had you review it? I would buy it, but seeing that sheath do that makes me hesitant.

@pubplays368

Жыл бұрын

I mean, worse case scenario. You can opt for a quality sheath from a sheath maker. I’ll never go back to factory sheaths.

@NavySooner

Жыл бұрын

ZT is a knife company not a sheath company. KnIves that come with nice sheaths usually have them made by other companies and the price is made higher because of it. Almost every sheath that comes with a knife out of the box has downfalls. There is more than likely a kydex gun holster maker near you that will make you a better sheath to specifications you want. not to mention are you so technically inclined that you need to have the sheath Attached upside down without the button on it?

Great review and great knife If anyone is interested in this and the sheath bothers you, you can snug up those flap by the heatgun method OR by putting a hole through both on ONE (blade or spine) and tightening it up with some lockwire. Basically just increase the tension via wire a bit higher up the flaps, it would take some playing with but totally doable.

I figured out the kydex rattle trick. You have to slide the knife into the sheath very straight, for me almost like keeping the knife lined up on the cutting side of the knife, then it'll click into the sheath without any rattle or what so ever(the knife is totally locked in and no need to use the snap loop). I'm not sure if it is purposely disigned like this, but at least it's my case. For those who don't know what to do i might be able to help.

@gideonstactical

Жыл бұрын

Wow, I just went out and messed with mine again. It is still loose and slaps around. I will keep messing with it but should be this difficult if there is some trick 🤔

@wilddogsoutdoors

Жыл бұрын

Can you post a video somewhere? I am thinking of buying this knife

Lmao the featherstick doll killed me 😂😂😂

@gideonstactical

Жыл бұрын

Hahahah!! I though you guys would get a kick out of it!

The NL3 black leather knife sheath from Falkniven is a perfect fit for this knife, that's what I'm using. The sheath can be purchased separately on a few sites. Just A heads up.

@gideonstactical

Жыл бұрын

Awesome! Thanks for sharing

@alanmeyers3957

11 ай бұрын

Yes, but that sheath is even sadder in my opinion.

@chrisshipley9316

11 ай бұрын

@@alanmeyers3957 How so? It's actually a really well made sheath.

Awesome review. As you said it looks like a perfect balance between tactical and survival.

Can't agree more, got this one a few weeks ago. I dare to say this is probably one of the best combat/field knives in the market currently.

@gideonstactical

Жыл бұрын

Nice to hear your experience is similar!! I totally agree!!

The sheath is always a make or break when I’m considering purchasing a high end knife. If the sheath is just an afterthought, it’s a no-go.

@pubplays368

Жыл бұрын

I’d rather pay more for a quality knife with a cheap sheath than a mediocre knife with a mediocre sheath. There’s many talented sheath makers these days that’ll make you an heirloom rig.

@bronco1199

Жыл бұрын

​@Pub Plays both good points.

@cowboyx9380

Жыл бұрын

@@pubplays368 Agreed, i grabbed a BK2 few years ago…sheath was junk…ordered a custom kydex from Valhalla customs…perfection!

@simonh2011

Жыл бұрын

I used to do this but I found every knife I really wanted had a sheath that didn't suit me (leather when I prefer kydex, no firesteel holder etc) so I just get custom sheaths. Frustrating but at least I get what I want

@dergutequell

Жыл бұрын

Look 's pretty cheap....

Excellent review Aaron. Very informative Thanks for all of your hard work.

@gideonstactical

Жыл бұрын

Glad you enjoyed it!!

At that price, coating should be DLC or PVD for added corrosion resistance. Can make due with the bogus sheath

Thanks Aaron. Nice looking blade for sure; definitely would carry it. I have quite a few blades that have no combat attributes. Good knives, but lack due to this. The ability of a knife to excel in a tactical role is necessary. The ZT0006 appears to fit this requirement.

@gideonstactical

Жыл бұрын

Sweet! And I agree it is nice to find a knife that can do both!

IMO it should be at the 250 price point. You can get a bark river or Bradford for that price range.

@gideonstactical

Жыл бұрын

Totally, as I said steep on the price 👍

Hello, the profile of the blade is similar to that of the Lionsteel M5, I don't think it is hollow, it is also a hybrid knife but the price is high, I paid 180 euros for the M5 3v and the knife is superrrr... greetings from Romania!

I've been a fan of ZT for years now. Their ZT-9 bayonet is a sought after item for me. Maybe one day I'll find one!

Awesome Blade , but for that kind of money it should definitely have a Kydex Sheath ....👍🖖

At four ounces lighter than BK2 and a lot of arguably better features, definitely seems like a winner.

Great review, Aaron. Thanks. This knife has been on my radar for a bit. I think you may've just executed your predictable MMA/Jiu-jitsu submission moves on my checking account, yet again. Why do you hate my financial stability so?

@gideonstactical

Жыл бұрын

Hahaha I am sorry my friend!!

Nice looking blade that is on my list to get this year. Getting an aftermarket Kydex or leather sheath that is properly adjusted would be a pain because is going to be a custom job so it is probably going to cost at least 120-200 dollars making the price of the combo almost 500 dollars. That is allot of money for a knife that should have come with the proper sheath to begin with. I recently ordered the Pohl Force Quebec Two and new Tactical Eight BK which are made in Germany and are designed by Dietmar Pohl whose attention to the small details like very tight Kydex Sheath that are done in-house at his factory and his blades are all done in house as well really IMPRESSED me for the price point. I like to collect and use Military and Survival knives that I keep in my Jeep when out on the trails and also keep them attached to my Tactical Gear while training since that was a major part of my life when I was in the Military. I really do wish that I had the access to a couple of good friends that are still active duty and are stationed overseas at the moment who were Kydex and Tactical Nylon Wizards and could manufacture a complete Tactical Vest or Plate Carrier in a matter of 2-3 hours depending on how complex or how many beers they were drinking while sewing.

Great review and terrific looking knife for multiple tasks. Would like to see a lanyard hole as an option/update.

@chriskitchen4772

Жыл бұрын

Yes, I agree.

KA-BAR U.S. Marine Fighting Knife. I bought and carried one in Desert Storm and I was in the Army! Still have it and when I need a big knife to get a task done it has never failed me.

The profile reminds me of a Randall Astro blade, a P-51 Mustang and a Mako shark. I can get passed the sheath. Straight fire.

An Operator's outdoor blade in an inoperable sheath. Reminds me of the ANV M73..only better, with useful M11eod hand guard too. 👍👍

Hi All, I just purchased the blacked-out version of this knife (a bit newer than the OD green version). The sheath retention is perfect. In fact, I cannot shake it loose even with over-the-top upside-down shaking and it will not come out of the sheath except by pushing my thumb against the sheath separation to open it up. Not sure if it is a one-off or if they have updated the retention quality assurance? My only preliminary worry about the sheath is the knife rattle. Minor issue for me but we will see what the results are in the field. Arrived with a fantastic edge and despite holding off on the purchase for almost a year (the knife is bigger than I like and was iffy on the $$$) - I am happy with the initial quality. It will start its bush live late this week. Keep up the good work on testing the fixed blades in field conditions. Thats what it is all about.

As far as the kydex sheath goes I like a little play for water tension and wear. Beautiful knife!

I bought one, and love it. The price was a little high, but everything is expensive.

That poor spaghetti squash! 😂. I do really like this design from ZT

How easy is it to sharpen vs something like a Esse 6? What makes the steel on the 006 better or worse than 1095? Thanks!

Thank you, great review. I just ordered mine.

@gideonstactical

Жыл бұрын

Glad it was helpful!

Looks like an outstanding tool but wow,that price. I have paid that much for a knife do t get me wrong but it was custom made with great leather work for a sheath. I dont know maybe I'll save for Christmas. Great review, thanks for posting.

Great video keep them coming!

@gideonstactical

Жыл бұрын

Thanks Lee really appreciate it!

Nice blade. Might have to reward myself with one when I complete baby step 2 of the Dave Ramsey plan

Thank you 👍.

I have seen so much negativity about this knife, and it has been frustrating to read. The sheath point is very fair, but people modify sheaths or order custom ones all the time anyway. I think a lot of people don't actually use knives they talk about and, therefore, can't recognize innovation and "near perfection" when it is in front of them. The planning that went into this product is applaudable and one of the best knives ZT has produced in years. Hands down one of the best multi-purpose fixed blades on the market. If the stock sheath is stopping you from buying this, you weren't going to buy it anyway.

Good looking knife, a better kydex sheath is warranted. For clarification: This is a combat knife - a general purpose knife, and not a fighting knife, yes it could be used as a fighter but it is not designed to be a fighting knife. A classic example of a fighter would be original Bowie knives, like Sheffield pattern blades, or a Randall model 1 fighter or a RMK model 2 stiletto. The biggest difference between fighting and g.p. knives is that fighters need to be lively in the hand, vs heavy duty / general purpose use like the TOPS. Except for the sheath, that knife will make a good general purpose knife. Albeit the upper guard will interfere with some tasks. IMHO, there are less expensive options that will serve the same purpose; i.e. an ESEE 6.

The ZT 0100 is my favorite ZT fixed blade

Looks like a great design, I would like the top guard to be shortened by a third and would much prefer a well made leather sheath.

I personally feel like I have the best possible combat knife and I know that many may not like it but I absolutely love it. It's a busse combat team Gemini ultra light brigade and man it's really really nice.

Very nice. Looks like they got cold steel to make the sheath though😬

Love the blade shape and grind, looks great!

I feel for the price it could have came with a better sheath, more options on the handle . Nice to see in magnacut and like S30v , don't get me wrong my fav knife is cpm3v . I feel that's a 250$ knife not a 320$ knife .

@johnmaccallum7935

Жыл бұрын

I disagree as each week I grocery shop I spend more than the prior week. Every thing cost more so to me it's a bargain.

Pineapple into Pac-Man. This should be the new standard! Love it 😁

@gideonstactical

Жыл бұрын

Hahah thanks so much! That and the dance stick lady!

@WhispyWoods.

Жыл бұрын

@@gideonstactical you were on fire with this vid!!

A shame about the Kydex sheath. I actually think $320 is fair, but if I can find the knife for a bit less I have a great Kydex guy who could make a much better replacement sheath with no rattle. Thanks for the always thorough review! 👍

You might like the sheath more if you wear it the correct way. I saw you had it on backwards in the beginning of the video. Also, I put 3 ranger bands over the retention part of the sheath & now it works amazing - super strong “click” & no rattle.

The sheath is an irritation but it's in no way a deal breaker. They can be modified or replaced. The investment is in the blade/knife. Looks awesome, just need to come up with 430 bucks (Canada) and that's a deal breaker for me, for a fixed blade.

@rhettlyerly545

Жыл бұрын

Your points are spot on. The knife looks to be a pretty solid blade in 3V; I really wish that the factory sheath was improved a bit, but it is workable and could be improved with a couple of minor modifications. An aftermarket sheath is not a huge deal as long as you factor that cost in. I would not avoid a great knife solely because of its factory sheath.

Been waiting for an actual use review. I get the feeling most people buying ZT fixed blades don't actually use them. Side note: I haven't bought anything from ZT in 5 years since they outright refused to honour their warranty for their European customers. I even offered to pay for the replacement part & shipping (lockbar insert / detent for 0562cf) they REFUSED. Terrible company but I may have to get this one..... nothing really to go wrong with a fixed blade so I won't need to use their (non existent) warranty. As far as folders go I will never buy from ZT again.

@gideonstactical

Жыл бұрын

I am sorry to hear that my friend, but at least you know what your getting from support with the company.

@tacticalcenter8658

Жыл бұрын

Zt are sus and customers never use them.

@wjf213

Жыл бұрын

Well after reading THAT, my mind has been changed about buying anything from them. It's sad too, because I was REALLY liking this knife, but I'll just get a custom maker to make me one, with a couple small to the knife that I'd want. I love 3v steel and have several blades made using forged 3v and hands down, the best knives I've ever owned, and I've been buying knives since I bought my first two Randall's back in the 70's, the model 14 and model 18. Thanks again for the heads up on the company's warranty issues.

@randystrand908

Жыл бұрын

​@@wjf213What production knives can you recommend with 3V?

@tacticalcenter8658

Жыл бұрын

@@randystrand908 Carrothers performance knives has some of the best 3v heat treat. If you were ever thinking of the zt, get the Carrothers instead.

Pineapple into Pac-Man 🤣 had a good laugh out of that one

Where can people buy the tops modern gladius? I seen it’s out but I can’t find it

@gideonstactical

Жыл бұрын

Not sure, I am sure it will be able soon.

Bravo man. Love your reviews. New subscriber for sure. Your solid without a doubt. ! Thanks for what you do.

@gideonstactical

Жыл бұрын

Thanks for the sub! And welcome to the GT Crew. Really appreciate and alway try my best to give good info and entertainment to you the viewers.

I like the idea, but would love to see an edc version of this: Same steel, shorten blade, change cross guard to finger guard (nothing on the back end), edc friendly sheath… I’m down

Lionsteel T6 is a great alternative and cheaper. T6 has an excellent sheath too.

At that price point I would be looking at a FOBOS Tier 1. That said, I think a Benchmade Arvensis is a cheaper option with a superior sheath.

I would buy it but like you said that sheath is scary. Also that knife made you go a little insane in the woods there. Not sure if I want that. Anyways great review as always.

Looks like a really great knife, but a complete miss on the sheath, and for the money, the sheath should stand out in performance as well. Great review, as always! This crossover between survival and combat is always an interesting niche for me, and many manufacturers struggle with it, but this ZT blade looks to be well done. If I wouldn't have to pay for a custom sheath to run it, I might consider it for $320, but not with a rattling, 0 retention kydex sleeve essentially.

@pubplays368

Жыл бұрын

The majority of that money is dedicated to making an absolute unit of a knife. Who cares about the factory sheath. Upgrade that bad boy for an heirloom set up!

@sg-oe9wb

6 ай бұрын

Its quite frankly a disgrace. Allowing a product out the door with this issue implies a lack of competence or caring or possibly both. It would be bad enough on a $20 ebay knife but at this price point it should be withdrawn until the issue is addressed. Fanboys in the community are giving these players way too much of a pass and these issues are continually popping up these days. Zero Tolerance should be 0.1 Tolerance.

I have to agree about the sheath, it misses the boat. Also, I tend to wear my shirts untucked so the snap on the nylon belt loop is set too high. I could remove it and drop it lower, which might solve some of the retention issues but I Dont want to have to modify something that I just purchased or feel that I have to upgrade the whole sheath itself. This knife also looks like it could receive a bayonet ring on it and it’d be right at home on the end of an AR platform. So this is not a priority though it is an attractive Knife.

@loyalegroup3929

Жыл бұрын

This makes complete sense, as I believe that the design is somewhat based on the (discontinued?) ZT-9 bayonet, which I believe was about an inch or two longer. I'm gonna' wager that, when they offered the bayonet, ZT probably had a bunch of their diehards suggesting/requesting that they build a "combat"-style fixie in a similar configuration...although I don't know for sure if that's the case.

Aaron....bud, no offence brother...but.. it's like an old Schrade schf godknows and the sheath is the old schrade schf27 and at a colossal price....Its probably something I would have gravitated towards when first starting out, that survival outdoors combat kind of look etc....sorry bud. Brilliant video once again, cheers 👍👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🍺🍺🍺

Looks by far better than those quarter inch blades companies have been sending out to KZread channels so we can watch em get used as less effective axes the last decade.

I sure like it. But would it be even better if the edge started all the way back to the guard?

At 6:15, yeah it just has to be skeletonized otherwise it would be so back end heavy and more like a club than what is supposed to be a military knife. As long as there is enough "meat " after the first bolt hole.

So what if the little screw and nut securing the pommel is compromised and the knife is discontinued? Is that some kind of standard part? Seems like much integrity relies on that one screw and nut. It is stripped and the pommel does not stay on and the guard potentially loosens.

Sweet knife. I wonder if ebay will have custom sheaths for sale.

I own a Hinderer Fieldtac Harpoon 6 inch fix blade. It looks to be the same size as the ZT and I think the are the perfect length and width for my kitchen and camping. Expensive but worth it.

Love the knife hopefully they might add a model with no guard 0006e. I can wish

Been carrying this for a week now, love this knife!

@gideonstactical

6 ай бұрын

Awesome!!!!

cool review,thanks. maybe ZT should have used a sheath like the Spec-ops Combat Master

Love the dancing knife song lay off the bud light buddy 😅

@gideonstactical

Жыл бұрын

Hahhah!

I think ZT designed this as the perfect SHTF knife

Another youtuber opened a box with a ZT fixed blade in it and never did a reveal, as promised. I commented and waited for a couple months before I just gave up and walked from that channel. I believe this was that blade.😅

I was always partial to the Yarborough Spec Ops knife. This reminds me a little of that.

@gwailotus9154

23 күн бұрын

Chris Reeves?

Dang. What-a-blade!

I want this knife so bad but ZT does not know me yet but give it time lol. The new Kabar/spartan combo looks great as well ordered it yesterday

@gideonstactical

Жыл бұрын

Videos on the Spartan Kabar’s next week!

What about the back of the knife? Can I use it to make wood wool and use a firesteel?

@gideonstactical

Жыл бұрын

No 90 degree spine

Un gran video e información verdadera de los cuchillos,como nos tiene acostumbrado siempre.

Looks like a cross between the Medford USMC Raider, and the STA Sniper Vulcan.

Beautiful piece, looks like the smaller version of the Cold Steel Trailmaster. I hear 3V steel is amazing, don’t have anything in it yet. I couldn’t care less about the cheap-ass sheath, I do leatherwork so I would probably make my own anyway. Still too expensive though, even for US labor costs. If it was $200 and had a lanyard hole I’d be cracking open my wallet right now!

@jdm8577

Жыл бұрын

3V steel is chippy.

@D4rkM4773r

Жыл бұрын

100% on the price. It’s nuts considering the X variants of Fallkniven are cheaper rn. If a Swedish company who has their blades made in Japan AND the X series has some bs laminate process which makes it more complicated to mass produce costs less … there is a problem

Great review. Looks to be a great knife, and a not great sheath. Hate when that happens! Love ZT.... come on, let's get working on a sheath option or 2 to offer, and improve or fix up the standard one. Love this channel, keep it up!!! VGblades

In a future iteration I hope they remove the jimping on the spine. Since there's a guard, there's no use for it. It's a pointless stress riser.

Hey just found your channel and subscribed.

@gideonstactical

Жыл бұрын

Welcome to the GT family!!

OK Aaron, gun to your head would you prefer this ZT0006 or the Tops Silent Hero?

@gideonstactical

Жыл бұрын

ZT, the more I have used knives the handle on the silent hero is too thin for my taste and the blade on this ZT is crazy good. But the silent hero is still excellent. Just knowing what I do know of both I could get about the same work done with either and better edge retention.

Wanted. Ordered. Used your link.

@gideonstactical

Жыл бұрын

Thanks so much Steve! Hope you love it as much as I do and that it serves you well.

Awesone review, would you say that this is better than the Lionsteel m5? I've been looking to buy that one but after seeing this video I'm on the fence now.

@gideonstactical

Жыл бұрын

This I more capable then the m5 close contender with the T5 it’ll just come down to more of handle style and a few features. Is the retro styling in such a high performing package that really impressed me.

Looks so much like a Fox knife I have only the ZT is CPM3v vs N690.

How does it compare with the kabar bk18 as far as crossover survival/combat?

@gideonstactical

Жыл бұрын

The K-bar is a good choice as well. The 3V steel and grind on the ZT is better.

@jeffsteele6410

Жыл бұрын

Awesome, thank ya sir!

It's a beauty

For this price you could have the tops us combat, the baja 4.5 and a kydex sheath for the us combat made... or about 53 mora basics...😂

@gideonstactical

Жыл бұрын

For sure 👍

no doubt really like that one and the Halfbreed

For the cost of one of these, I'll stick with my Randall model 14.

Beautiful knife. One observation: CPM 3V is not a Stainless Steel. So if used frequently outdoors or in the kitchen should be dried and lubed every time. Stainless steels lke M390, CPM154, S35VN etc would be a better choice.

Is there a lanyard hole? I couldn't see one. Puccini (UK)

@gideonstactical

Жыл бұрын

No lanyard 👍

I was hoping you would review this... I'm trusting you... 😂

@gideonstactical

Жыл бұрын

It’s pretty freaking sweet!

Really sweet looking knife that crossover both aspects. Such a bummer that an excellent knife has a flaw in the sheath.

@gideonstactical

Жыл бұрын

Ya it’s fine for belt carry just need better retention on mine to be more versatile.

I would go with a survive knife. Better steel better heat treatment better kydex and better price. And if it's important for you also USA made.

Nice blade

Need my guy JOE X to test this piece

firesteel works on this blade?

Dang it! 2 things are killing me about this and keeping me from purchasing. 1st.. Is it a choil or not?! I cringe up so hard when I see these half-ass choils. Make it a dedicated finger hold or add more cutting edge otherwise it’s a waste of space. 2nd.. No 90 spine is robbing so much fire craft and wood processing functionality just for “comfort”?.. Aaaaand (I know I said 2 things but here’s a 3rd;) lastly, I prefer a small area of exposed pommel (further processing or “forehead contouring” 😆) .. Does it replace my Tops Desert Nomad? 🤷‍♂️.. Thanks for hearing my rant! See you all “out there” ✌️

@gideonstactical

Ай бұрын

Good points!

I make custom battle and survival blades. I mostly like the design of this. Mostly. I would prefer D2 steel, a sharpened clip and get rid of the jumping on the blade. Maybe another inch of blade length and a few other changes.

If I drop that much cash on a blade, it had best not have any short comings. Having to have a custom sheath made right out of the box is inexcusable from a company like ZT. My KA-BAR Turok may be 1095, but it performs well and hasn't let me down. Plus it comes with an excellent sheath. If ZT addresses the sheath problem, I'd love to add it to my collection.

Hey Gideon , bro need your advice !!! This or Reiff f6 ? 😅 I’m torn both expensive , just seen your add in review of the f6 , this is for stabbing also not the f6 lol

@gideonstactical

10 ай бұрын

Both great knives. F6 if you’re mainly focused on camping. If you want a more crossover utilitarian tool to go in a go bag and be able to camp with at the same time I’d lean towards the ZT.

@stevevano2840

10 ай бұрын

Thanks bro 😎 zt it is 👍🏼

Looks like a great knife, but the handle could be a bit more ergonomic. A hole for a lanyard or some kind of swell at the pommel that would help keep the knife in the hand during a combat situation. Great video! P.S. Was there a suitable place to strike a firesteel? The spine looks pretty smooth. : )

@gideonstactical

Жыл бұрын

No fire steel spot. Thanks for watching!! 👍

@wyles965

Жыл бұрын

@@gideonstactical Quite essential for a ‘survival’ knife to have a spot to strike a firesteel though surely? Still like the look of it as a combat knife and made out of 3V so will take some abuse. Not convinced it’s for one for me though.

@Revenant483

Жыл бұрын

That was my thought after a long day of chopping / cutting I could see that handle being an issue. If you were to use it for a combat knife it might slip out your hand. Would like to see some finger cutouts.

@martinmiller1087

Жыл бұрын

@Roosterdad ... There's a hole in both quillions large enough for paracord. ... *See Gideons Tactical vid on the Silent Hero for use of forward attached lanyards. ... The sharpening choil doesn't look like it's radiused. It might strike a fire steel(?).

@CaptainDeadp0ol

Жыл бұрын

@@gideonstactical What about the choil, looks like a good bevel angle for fire steel