Something I learned about those sliding tie-downs. You don’t have to slide them to get them on the rail. Just position the T-nut so that when you push the tightening mechanism in, it pushes the T-nut into the slot. Twist once to get the T-nut to grab the rail, and there you go. Also, the newer feet for the bulkhead panel are L-shaped where they bolt to the floor, at least for ‘21 6-footers.

So expensive I can see 250 for everything not 700 😳

Good video - that will add some organization to the interior of the bed!

@Runnin4Tacos

4 жыл бұрын

Thanks!

Nice job on the video...it was very helpful to me.

That is a good useful kit thanks.

$450 for 2 sides and 1 front rack. A bit insane. I'm in the wrong business :D

Dude for the tie downs you can put them on after, you can rotate them and put them on or take them off at any time.

Very cool

Great vid as always guys, love the channel! Did you know the rail cleats can be put on or taken off without having to slide it through the rail?

They're so cool wishing I could afford them all haha

This is a really cool mod. I'm an electrician and was thinking I could mount my benders on the sides. Cool video guys.

@aldenaldo5472

3 жыл бұрын

I guess it is kinda off topic but do anybody know of a good site to stream newly released movies online ?

@nathanielmatthias9360

3 жыл бұрын

@Alden Aldo Flixportal :D

@aldenaldo5472

3 жыл бұрын

@Nathaniel Matthias thank you, signed up and it seems to work :D I really appreciate it !!

@nathanielmatthias9360

3 жыл бұрын

@Alden Aldo Glad I could help =)

I wonder if these work with a Leer camper top, it would be a pretty sweet system if it worked with a camper top. The only thing I dont like about them is that they use the bed rail because there are alot of things that use the bed rails and some may cause compatibility issues.

Great install video. What nutserts/rivet nuts did you use to add extra attachment points?

When are we gonna see some Tundra Mods???

Does anyone know what's the plastic plate he has on the tail gate protecting the paint next to the composet tail gate liner.

insanely priced for some machined sheet stock.

@4JeepxJK4

4 жыл бұрын

roboticmind23 of course it’s gonna be 700 dollars bc they know ppl like this guy are gonna buy it bc they don’t know any better

When are you going to do re gear update video

All of these full Molle rack systems seem to interfere with the OEM LED bed lights. Does anyone know of one that doesn't?

how much noise do the racks create ?

will this work with my leer hf350m?

I like the idea of the mole but it would be better if on the side plates they would make the mounts go behind the rail, so it didnt impede with the slides. Probably not that big of a deal but it should be an option.

@khanhd716

3 жыл бұрын

The BuiltRight Industries one go behind the rail!

@RossPotts

Жыл бұрын

@@khanhd716 so does RC.

Do the Bed Molle Racks interfere with a Diamond Back HD cover?

@Runnin4Tacos

3 жыл бұрын

Not sure to be honest

No Tacoma bed Matt?

does this work with the factory Hard trifold tonneau cover?

@Runnin4Tacos

2 жыл бұрын

Yes, you just have to select the tonneau cover version.

Can the full length side panels be used with a RetraxPro XR bed cover? If not, does Cali Raised sell the half length molle? Thanks

@Runnin4Tacos

3 жыл бұрын

They do, we have the half pieces here: www.runnin4tacos.com/products/cali-raised-led-bed-molle-system-toyota-tacoma-2005-2021

@H20Spy

3 жыл бұрын

@@Runnin4Tacos Wait, does the full length fit or are you saying only the rear panel fits? Thanks

Can the tie downs at the front/sides of the bed be reinstalled?

@RossPotts

Жыл бұрын

Prolly after you cut the MOLLE panel strategically…

Does this work with a snug top

@okstever

4 жыл бұрын

Depends on the cover and where the mounts go?

If the hardware was black to match the panels it would look great.

@Runnin4Tacos

2 жыл бұрын

Agreed

Does it work with a roll n lock?

@Runnin4Tacos

3 жыл бұрын

We have the version that will fit some tonneau covers but not sure about yours

Will this still work with bed cover?

@Runnin4Tacos

3 жыл бұрын

That I'm not sure

What size is that rotapax? Is it a galon?

@Runnin4Tacos

Жыл бұрын

2 gallon.

does it fit if you have a bed cover?

@Runnin4Tacos

2 жыл бұрын

You have to purchase the tonneau cover version

So what do these racks accomplish, are there other things that attach to them? Plus they are way overpriced.

Thats cats ass! Think I'll get that for my 2020. Kinda expensive for what it does though

I think I will be skipping this mod because I ordered a shell for my Taco! voodoobluetacolife19

Cool stuff. Obviously overpriced, yet undeniably useful. My only gripe is the silver hardware. It should all be black. Everybody into this stuff digs tactical gear, and a bunch of tacky silver hardware cheapens the look.

@Runnin4Tacos

4 жыл бұрын

Agreed but black hardware turns silver as soon as you put a tool in it. We thought the same

@the_black_arts

2 жыл бұрын

@@Runnin4Tacos Btw, highly recommend using Kolpin Rhino Grip Flex mounts rather than Quick Fist for axe/shovel/fire ext, etc. Personally, I think the QF mounts are garbage, and their rubber straps break very easily- in fact, two of my QF straps broke the first time I mounted gear on my MOLLE setup. Kolpin mounts work the same way but are much more durable & trustworthy.

@kahinupayne

2 жыл бұрын

@@the_black_arts How easy is it to install the Kolpin mounts?

stupidly overpriced, id pay maybe 400 max for the full set.

@Runnin4Tacos

4 жыл бұрын

Definitely can agree, they are pretty expensive for what they do.

Way to expensive they suck. Go to Rough Country instead

Instead of mounting to the side of the bed for $200+ you can actually just throw it in the bed and deal with it sliding around... IDK if you knew that