I made a bottle cutter using a heating wire. Very safe to work with. Click here for the plan jsk-koubou.stores.jp/
Жүктеу.....
Пікірлер: 437
@jisakukobo Жыл бұрын
I hope the video is meaningful to you. If you like the video, please introduce it to your friends and social media !
@ll-Mark1-ll
Жыл бұрын
is there part two? because using heat by itself will not cut the glass as you showed, I am sure you used diamond blade or something similar first.
@xMeta4x
Жыл бұрын
@@ll-Mark1-ll Agreed, you can clearly see a score mark.
@DieDoeDa
Жыл бұрын
@@xMeta4x On how many of the bottles? Heat alone works, applied locally.
@xMeta4x
Жыл бұрын
@@DieDoeDa Nope, it won't split along a precise line like that, might shatter. Looking at the previous video where he shows how to score them, must be scored. Otherwise there's nowhere for the glass to break from.
@DieDoeDa
Жыл бұрын
@@xMeta4x I did this with yarn+lighter fluid +bucket of water some 30 years back. Works without scoring, you just have to create a narrow border zone between the cold and the hot part of the glass, then it'll shatter along that thermal stress line.
@distantsignals28948 Жыл бұрын
Apart from your great project it's so refreshing to see someone on KZread who knows how to solder properly!
@merlinch4256 Жыл бұрын
I'm always deeply impressed by your precision. Great! Always a pleasure to watch you working, and the results. Thank you 😊
@janinev916810 ай бұрын
I'm always so impressed how woodshops outside the US are so clean and tidy. As well as the creators manicured hands.
@Allexz
5 ай бұрын
haha, so uh, it might not have anything to do with the fact that it's a studio producing videos? If it was a workshop not producing videos it obviously would not look as nice...
@metricstormtrooper Жыл бұрын
You've got to love somebody who pre tins wires before trying to solder them together, a mark of a true Takumi.
@sobored7766 ай бұрын
As a former electrician I love that you used the proper tools and fused your build. I saw too many videos of people creating fire and electrical hazards.
@buggsy5
5 ай бұрын
The design is beautiful and the person used mostly proper tools and techniques. Never use solder on an electrical connection. This is even more true when the connection is under stress - such as this project. Never use a screw or any other thread as an attachment point to fasten a wire in place. The fuse should probably be on the power input of the power supply - although one on the load side as well is nice. It looks like the homemade power supply had only a two wire input. With a metal case, it needs to be 3 wire - to accommodate an equipment ground. The only shortcoming mechanically I saw was that it will accommodate only one diameter of bottle.
@LuisGLenero136910 ай бұрын
Absolutely stunning concept! And great video as always. Every viewer recognises how much passion, soul and - not least - the precision you put into your projects, that makes every documentation of your work so amazing, useful and outstanding! Greetings from Chicago, Illinois. U.S.A.
@johncalvin9703 Жыл бұрын
Haven’t got a clue what he’s making, better than any magician, absolutely brilliant, thank you
@tetsubo57 Жыл бұрын
Brilliant. I've never seen this particular method of bottle cutting before.
@sddiymakeitworthit7512 Жыл бұрын
That’s so organized and so specific that I can’t stop watching 🙏 👍
@spaceinvader384 Жыл бұрын
Wonderful innovation. Love all your equipment (wish I had them). Now we've learned to make plenty of beautiful vases , pen holders etc for the family. Good work.
@davidsneddon2242 Жыл бұрын
So clever and so inventive JSK-k, such a peaceful video to watch⭐️
@markhedquist9597 Жыл бұрын
What?! Well the top of the bottle just fell off! What are you doing here? Haha! Very cool...very nice. Yet another one of your amazing and precise creations. I just love your work, sir. Most excellent.
@joumannoe Жыл бұрын
Absolutely stunning concept! And great video as always. Every viewer recognises, how much passion, soul and - not least - precision you put into your projects and this is why every documentation of your work ist amazing and outstanding! Thumbs up and greetings from good old GERMANY!!!
@aaronkirkland212
Жыл бұрын
I was also stunned by the concept. I have a friend that works at Subway and he too was a bit stunned. Not as stunned as me but stunned none the less.
@divaperdomo Жыл бұрын
I love your shop clean organized.and all those fantastic tools 👏🏼👏🏼
@maurolunajimenez11255 ай бұрын
You are really surprising, your work and your videos are very precise and clean. I see at least one of your videos every day.
@ralphiewigs2208 Жыл бұрын
Awesome! I didn't know I needed one of these until just now.
I wish all teaching videos were like this No need talking Thank you 🎉
@lawrencetessler6831 Жыл бұрын
I saw a similar but much simpler approach in the 1950s in Popular Mechanics and I tried it and it works just as well as the one here. The idea is the same. Score the bottle with a glass cutter or carbide knife as done here. But, rather than build the contraption shown, simply wrap a strand of straight nichrome wire around the bottle on the score line, apply tension (a weight, spring, etc.), and apply electricity - no bottle spinning necessary - and the bottle breaks at the score line. As a note, if you are going to cut a bottle, it is a good idea to have some abrasive handy (carborundum is really good) in order to smooth the edges of the bottle - they are sharp and will cut you.
@michealayoung1785 Жыл бұрын
Oh my god you are an absolute genius😮 perfection amazing so clean, I would love your work shop 🥰
@IEnjoyCreatingVideos Жыл бұрын
Great job on the glass cutting jig that is really neat :) Thanks for sharing the video with us!💖👍😎JP
@JoseSilveira-newhandleforYT Жыл бұрын
I've seen many bottle cutters by heat, but this is the Rolls Royce of them all! Well done.
@MrUzaktakidost Жыл бұрын
What a wonderful piece of creation. Thank you for sharing . Greetings from Sydney
@mikedalakis52923 ай бұрын
Simple but very effective. Brilliant design. Thanks for sharing.
@Marcelo-56 Жыл бұрын
Todo lo que construyes es detallado, preciso y prolijo. Además son soluciones prácticas muy ingeniosas y seguras✅
@anway1953 Жыл бұрын
Outstanding engineering! Love your videos!
@viorsa8200 Жыл бұрын
Magnífico tutorial maestro, la fabricación de un cortador de vidrio por inducción, elevada al máximo nivel, cómo siempre un trabajo impecable y una herramienta que funciona de maravilla, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecidísimo like desde Narón (Galicia)👌🤓😜
@sapelesteve Жыл бұрын
Excellent idea and well executed as usual JSK! 👍👍💥💥
@MrCharliePC2 ай бұрын
Merci et bravo pour vos excellents tutoriels très clairs et très utiles. Votre travail est remarquable de précision et de propreté. Félicitations.
@michaelsommer3343 Жыл бұрын
That's unbelievable. And I thought I had already seen everything. Simply brilliant. Thank you very much for that 👍🏻
@pikifrino Жыл бұрын
Congratulations!.. Very neat & profetional job!.. Thank you
@alisafavi5430 Жыл бұрын
With all these equipments and her workshop, she didn't make a strange device, you can cut the bottle very easily, I wish I had this workshop and this equipment too.
@perecampoyvidal58775 ай бұрын
Fantastic video, great work professionalism and delicacy. Great virtues of a good professional.👍
@russellfreeburn6284 Жыл бұрын
What a great idea! Thanks
@qcasey Жыл бұрын
Nice work! Hugs from Brazil!
@user-vu8vo2rp7c Жыл бұрын
прекрасная работа!!! не ожидал такого результата. единственное я уверен что он мог бы сделать так что ему просто нужно было бы поставить бутылку и установить размер. с нетерпением ждем улучшения.)
@MCsCreations Жыл бұрын
Amazing work, dude! Really well done! 😃 Stay safe there with your family! 🖖😊
Amazing tool! I was hoping to see what your thumbnail picture showed…. I thought you where going to see a spiral cut bottle. Great non the less
@yeagerxp Жыл бұрын
Excellent work 👍👍👍 . Thank you for sharing.
@francoisblaquiere1963 Жыл бұрын
Une vieille méthode modernisée par une Adaptation plus moderne et Beaucoup plus Efficace !! Bravo ! pourbl conception de l Résistance !! 👍🏻👍🏾
@MrFEARFLASH Жыл бұрын
Мне очень понравилось!) Спасибо за идею!)
@michelmeunier5795 Жыл бұрын
Bonjour, bravo c’est une coupe bien nette c’est super. Très bonne vidéo comme d’ habitude Merci JSK -Koubou cordialement Michel 2A France 🇫🇷 Corse.
@albina8536 Жыл бұрын
Наблюдать за вашей работой - отдельное эстетическое удовольствие. Продолжайте, пожалуйста! Желаю вам всего наилучшего.
@taechosobaka
Жыл бұрын
Какой ток подают не подскажете?
@invent5027
Жыл бұрын
@@taechosobaka Это нихромовая спираль, рассчитывать надо для каждой в отдельности, зависит от сечения и длины, такая же спираль в электро плитке.
@taechosobaka
Жыл бұрын
@@invent5027 , спасибо.
@Inlog2023
Жыл бұрын
@@taechosobaka их полно на том же Озоне от 800вт до 1.5 кВт. Какая у автора, не знаю. Главное, чтобы до красна - должно хватить минимальной.
@taechosobaka
Жыл бұрын
@@Inlog2023 , 🤝🏻🙋🏻♀️
@masoodamg6633 Жыл бұрын
It was great my friend. I enjoyed . . Thankful
@lomequi4 ай бұрын
Muy bonito ,maravilloso ,espectacular y muy nitido . Gracias y felicidades !
@nun3sfc Жыл бұрын
Que perfeição. Resistência coincindiu com o risco na garrafa.
@homemadetools Жыл бұрын
Nice work as always. We shared this video on our homemade tools forum this week 😎
@kurtjeranko2293 Жыл бұрын
Wie immer, sauberer Arbeitsplatz, perfekte Arbeit
@grkxkosta33963 ай бұрын
i don't know who needs to hear this but there is a difference between "homemade" and having a full workshop inside of your home.
@Otras_cosas_de_Jorgito5 ай бұрын
Excelente, el mejor video que he visto de cortadores de botellas
@yarbone7 Жыл бұрын
nice work! Hope to see future projects using this device :)
@K_Shea3 ай бұрын
Why do I get the feeling this guy could eat BBQ wings without napkins LOL. Excellent video and not all that complicated.
@williamhanna5224 Жыл бұрын
Excellent video Great work !
@JuanPonce-lv1mu10 ай бұрын
Excelente video, gracias por compartir, saludos desde Mendoza Argentina.
@user-qx2up7qo2y9 ай бұрын
Sehr interessanter Bericht über ein (Fertigungs-)Verfahren, mit dem man übliche Glasflaschen bruch- und splitterfrei schneiden kann. In Finnland hatte ich vor vielen Jahren man von einer Künstlerin einen Glas-Becher gekauft, den die Frau aus dem Bodenteil einer Glasflasche hergestellt hatte. Nun weiß ich zumindest ein Verfahren, wie man solche Becher aus einer Glasflasche ferigen kann.
@netobatera20104 ай бұрын
Que capricho!!+ Parabéns! Ótimo vídeo. Grato.
@ambysto1541 Жыл бұрын
Waouh. The best way to cut glass 👍🤩👍
@SamJones1956 Жыл бұрын
感谢您的视频。 一个很好的主意。 来自奥地利的问候。/// Thanks for the video. A very good idea. Greetings from Austria.
@NFOsec Жыл бұрын
You are amazing as always!
@GxsieteRaySimRacerGTX Жыл бұрын
A 10 my friend, you are amazing 🙌🙌🙌
@RustamGani-pd9vv7 ай бұрын
Good idea, good process, good …. 🎉❤
@dariore5053 Жыл бұрын
Complimenti, sei un genio, qualunque cosa tu costruisca, è realizzata con una precisione e cura ingegneristica. ...il migliore!!!
@massimox8256
Жыл бұрын
hai ragione. ma forse esagera un po. si possono tagliare bottiglie a perfezione anche con un centesimo della attrezzatura che usa qui. in una frazione del tempo si costruisce il sistema per tagliare a misura e con il diamante di taglia la bottiglia. poi con una massetta di picchia dal di dentro e la bottiglia si divide. Ma ... a me sta bene che lui faccia di questi ricamini. però non mostra che questo sistema ha una certa erraticità intrinseca. e questo è scorretto secondo me. dovrebbe mostrare anche le volte che i tagli non vengono perfetti. non solo le volte che è venuto benissimo.
@MASI_forging Жыл бұрын
Thank for creating these video. 👍👍
@rezahaghighi3573 Жыл бұрын
سلام عرض شد.. دست خوش .آفرین.
@James-bv4nu Жыл бұрын
Cool. Don't know when I'd need to cut a bottle; but when I need to, I'll know how. =)
@user-dz1nm6ed4y Жыл бұрын
Классная штука. Раньше резал -просто обматывая нихромовую проволоку вокруг бутылки нагревая ей, а затем в воду. Для единичных разрезов хватало. Тут же можно уже серийно запускать резку бутылок.
@severstar3868
5 ай бұрын
при кручивание бутылки....разве не будеть раздавлены спирал ? спсб
@ganeshtn2098 Жыл бұрын
Brain is creative and idea is narrative ❤😂😂😂😂😂
@chavarj85 ай бұрын
Bonito trabajo. Great idea!
@eugeniuszgacek-hodowcaniet64268 ай бұрын
Wow, good Master 👍👍
@gerardmenvussa7464 Жыл бұрын
Génial bravo !!!!!👍👍👍👍👍
@SomewhatAbnormal Жыл бұрын
When I think of precision, I think of your channel! I’d love to see how you would build an MFT - similar to what Festool makes, but with your own unique spin. There are so many bad videos on this subject, but very few good ones. Specifically, people build MFTs that are ok for clamping, but not necessarily to be used for square. They never guarantee that their 20mm holes on 96mm centers are accurately placed. Which always makes me wonder why they go through the process of making so many holes if they cannot be used for accuracy? The reality is that accuracy is not easy, but extremely important!
@mukeshsharma4433 Жыл бұрын
Amazing, and mind blowing, wow
@y1256l Жыл бұрын
Нагородил огород не понятно для чего, но наблюдать за работой интересно. На 3 вещи можно смотреть бесконечно: как горит огонь, течет вода и другой работает.:))
@alexbest5903
Жыл бұрын
Оркам этого не понять...
@user-ju1xm5sx2m
Жыл бұрын
@@alexbest5903 да, такое понятно только великим украинцам.
@y1256l
Жыл бұрын
@@alexbest5903 Да да, орки делают проще, силикатный блок с зарезом, канавка для спирали и реж бутылки. Только особо одаренные херней маются и майданы ходят с подскоком.
@vytautasstravinskas8997
Жыл бұрын
s pervimi punktami soglasen - voda ogon eto da... no smotret na to kak drugoi rabotaet i poluchiat ot etovo udovolstvje... nieznaju eto bole dlia ruZZkix. Drugim narodam eto nieaktualno... mentalitet drugoi.
@y1256l
Жыл бұрын
@@vytautasstravinskas8997 Да, с менталитетом у вас все хорошо. ЛГБТ, однополые браки, замуж сама за себя, зоофилия - это отличный менталитет, в духе гейропы.
@femidacom4602 Жыл бұрын
Very good idea, I have the boards, it remains to buy the rest of the equipment and tools
@beatrizramirez18689 ай бұрын
Hola! fantástico! los vendes? ;) gracias, saludos
@mize_yir_bizz Жыл бұрын
Good stuff! Perfect every time - 🎈📌
@edgarrosales9079 Жыл бұрын
Excelente video amigo, para la descripción de los componentes eléctricos, donde lo consulto?, Saludos desde Guatemala 🇬🇹🇬🇹🇬🇹
@ikust007 Жыл бұрын
Ok. I thought of making one , but you made it before me:) I would humbly suggest putting a SS or other alloy in front of the elements in order to prevent abrasion and long term longevity . Thoughts?
@pixelfiesta9 ай бұрын
What are the specs for the heating element used? 230v, 2000W?
@rimadam9011 Жыл бұрын
Great work❤
@bosherba Жыл бұрын
bravo maestro!
@pardsdwin Жыл бұрын
tnx for sharing, its a great idea. new friend n supporter, stay safe n connected
@aurelienyonrac Жыл бұрын
Ok. So same idea. Faster and cheper. But less engeneer : wrap a wool twine around the bottle where you want to cut. Put rubbing alcohol on the twine. Light. When the wool and alcohol is burnt, dunk in ice water. (You make micro fracture with a dimond blade too to start) Great video
@emildimofte6538 Жыл бұрын
BRAVOoooo,SENSEI!!!!excellent MASTER of ALL,Art SHGUNOBU!!!!!🙏🌅🙏🌅🙏🌅🙏🔋🌿🔋🌿🔋💎👍💎👍✌️🎓✌️🎓✌️
@woodywood1951 Жыл бұрын
did you etch the bottle with a roller glass cutter before the heat was applied? Always very good videos👌!
@gsp911
Жыл бұрын
Yes, he just "forgot" to show that. I don't know why he don't show it, maybe to make others try this and fail. That way he will seem better than them. Disappointing. Sad impact social media and views have on most people.
@woodywood1951
Жыл бұрын
@@gsp911 dud, you have a problem
@gsp911
Жыл бұрын
@@woodywood1951 dud, ok
@jeremiahbullfrog9288
Жыл бұрын
yes very disappointing, i never caught him cheating before, now i am skeptical of all his projects
@woodywood1951
Жыл бұрын
@@jeremiahbullfrog9288 he does not cheat... He did show this part of the movie... Anyway, most of the people understood that...
@adrianpherreira8176 Жыл бұрын
Genial parabéns!!!👏👍🤌
@ricardocastillo9155 Жыл бұрын
Ola mi amigo bueno el invento pero muchas máquinas y no las hay, gracias de todas maneras que esté bien Desde riohacha la guajira Colombia
@olegpankrashkin5081 Жыл бұрын
Идеальная идея. Супер. 👍👏👌✊🤜🤛💪🤝🌟
@hugo_dog9898
Жыл бұрын
Я вот не понимаю зачем и для чего резать бутылки?
@reallyhorribleenterprises Жыл бұрын
That is a terrific concept (and execution). I only wish it would work on bottles that are not cylinders. Getting an oval or square or irregularly shapped bottle to lay flat like that doesn't work very well. I'll have to make one that works in an upright fashion so that the bottle can remain flat while it is being turned. 👍
@spycedezynuk
Жыл бұрын
You could use a soldering iron and straight edge or a rail with a carriage to slide it along
@Inlog2023
Жыл бұрын
Квадратную можно не крутить, а переворачивать на 180°, прогрев две стороны.
@DieDoeDa
Жыл бұрын
For irregular shapes you can use this old trick: Put a line of yarn on the intended cut line, soak with some lighter fuel and set it on fire, wait a moment and then submerge the bottle into a bucket with water, to introduce the needed thermal stress that then fractures the bottle along the hot line created by the burning yarn.
@Inlog2023
Жыл бұрын
@@DieDoeDa I tried this method for 3 times (3 bottles), and got no positive result, no clean edges (( Don't know why
@roger2641 Жыл бұрын
Great work. A+++
@theDaftman Жыл бұрын
very nice thanks for sharing. I would like to see more details on that vertical panel saw of yours, please.
@jisakukobo
Жыл бұрын
kzread.info/dash/bejne/fWmpo9Z7h7e_Y7Q.html
@user-ph8lv4nt8h7 ай бұрын
video shows that prepared tool is working very Nice , I request to give details of required items to prepare this tool, without all required items ready on hand one can not start to prepare such tool.
@markcollins34537 ай бұрын
That is very cool!
@HilarioBernardoParedes-js2wm11 ай бұрын
Excelente maestro
@diyhard666 Жыл бұрын
I love your precise work but regarding this project I'd rather prefer a diamond blade. Plus I don't know how to build such a power device
Пікірлер: 437
I hope the video is meaningful to you. If you like the video, please introduce it to your friends and social media !
@ll-Mark1-ll
Жыл бұрын
is there part two? because using heat by itself will not cut the glass as you showed, I am sure you used diamond blade or something similar first.
@xMeta4x
Жыл бұрын
@@ll-Mark1-ll Agreed, you can clearly see a score mark.
@DieDoeDa
Жыл бұрын
@@xMeta4x On how many of the bottles? Heat alone works, applied locally.
@xMeta4x
Жыл бұрын
@@DieDoeDa Nope, it won't split along a precise line like that, might shatter. Looking at the previous video where he shows how to score them, must be scored. Otherwise there's nowhere for the glass to break from.
@DieDoeDa
Жыл бұрын
@@xMeta4x I did this with yarn+lighter fluid +bucket of water some 30 years back. Works without scoring, you just have to create a narrow border zone between the cold and the hot part of the glass, then it'll shatter along that thermal stress line.
Apart from your great project it's so refreshing to see someone on KZread who knows how to solder properly!
I'm always deeply impressed by your precision. Great! Always a pleasure to watch you working, and the results. Thank you 😊
I'm always so impressed how woodshops outside the US are so clean and tidy. As well as the creators manicured hands.
@Allexz
5 ай бұрын
haha, so uh, it might not have anything to do with the fact that it's a studio producing videos? If it was a workshop not producing videos it obviously would not look as nice...
You've got to love somebody who pre tins wires before trying to solder them together, a mark of a true Takumi.
As a former electrician I love that you used the proper tools and fused your build. I saw too many videos of people creating fire and electrical hazards.
@buggsy5
5 ай бұрын
The design is beautiful and the person used mostly proper tools and techniques. Never use solder on an electrical connection. This is even more true when the connection is under stress - such as this project. Never use a screw or any other thread as an attachment point to fasten a wire in place. The fuse should probably be on the power input of the power supply - although one on the load side as well is nice. It looks like the homemade power supply had only a two wire input. With a metal case, it needs to be 3 wire - to accommodate an equipment ground. The only shortcoming mechanically I saw was that it will accommodate only one diameter of bottle.
Absolutely stunning concept! And great video as always. Every viewer recognises how much passion, soul and - not least - the precision you put into your projects, that makes every documentation of your work so amazing, useful and outstanding! Greetings from Chicago, Illinois. U.S.A.
Haven’t got a clue what he’s making, better than any magician, absolutely brilliant, thank you
Brilliant. I've never seen this particular method of bottle cutting before.
That’s so organized and so specific that I can’t stop watching 🙏 👍
Wonderful innovation. Love all your equipment (wish I had them). Now we've learned to make plenty of beautiful vases , pen holders etc for the family. Good work.
So clever and so inventive JSK-k, such a peaceful video to watch⭐️
What?! Well the top of the bottle just fell off! What are you doing here? Haha! Very cool...very nice. Yet another one of your amazing and precise creations. I just love your work, sir. Most excellent.
Absolutely stunning concept! And great video as always. Every viewer recognises, how much passion, soul and - not least - precision you put into your projects and this is why every documentation of your work ist amazing and outstanding! Thumbs up and greetings from good old GERMANY!!!
@aaronkirkland212
Жыл бұрын
I was also stunned by the concept. I have a friend that works at Subway and he too was a bit stunned. Not as stunned as me but stunned none the less.
I love your shop clean organized.and all those fantastic tools 👏🏼👏🏼
You are really surprising, your work and your videos are very precise and clean. I see at least one of your videos every day.
Awesome! I didn't know I needed one of these until just now.
... gratuliere, ...sehr viele, praktische Bauanleitungen...macht Freude zu gucken, danke !!!
I wish all teaching videos were like this No need talking Thank you 🎉
I saw a similar but much simpler approach in the 1950s in Popular Mechanics and I tried it and it works just as well as the one here. The idea is the same. Score the bottle with a glass cutter or carbide knife as done here. But, rather than build the contraption shown, simply wrap a strand of straight nichrome wire around the bottle on the score line, apply tension (a weight, spring, etc.), and apply electricity - no bottle spinning necessary - and the bottle breaks at the score line. As a note, if you are going to cut a bottle, it is a good idea to have some abrasive handy (carborundum is really good) in order to smooth the edges of the bottle - they are sharp and will cut you.
Oh my god you are an absolute genius😮 perfection amazing so clean, I would love your work shop 🥰
Great job on the glass cutting jig that is really neat :) Thanks for sharing the video with us!💖👍😎JP
I've seen many bottle cutters by heat, but this is the Rolls Royce of them all! Well done.
What a wonderful piece of creation. Thank you for sharing . Greetings from Sydney
Simple but very effective. Brilliant design. Thanks for sharing.
Todo lo que construyes es detallado, preciso y prolijo. Además son soluciones prácticas muy ingeniosas y seguras✅
Outstanding engineering! Love your videos!
Magnífico tutorial maestro, la fabricación de un cortador de vidrio por inducción, elevada al máximo nivel, cómo siempre un trabajo impecable y una herramienta que funciona de maravilla, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecidísimo like desde Narón (Galicia)👌🤓😜
Excellent idea and well executed as usual JSK! 👍👍💥💥
Merci et bravo pour vos excellents tutoriels très clairs et très utiles. Votre travail est remarquable de précision et de propreté. Félicitations.
That's unbelievable. And I thought I had already seen everything. Simply brilliant. Thank you very much for that 👍🏻
Congratulations!.. Very neat & profetional job!.. Thank you
With all these equipments and her workshop, she didn't make a strange device, you can cut the bottle very easily, I wish I had this workshop and this equipment too.
Fantastic video, great work professionalism and delicacy. Great virtues of a good professional.👍
What a great idea! Thanks
Nice work! Hugs from Brazil!
прекрасная работа!!! не ожидал такого результата. единственное я уверен что он мог бы сделать так что ему просто нужно было бы поставить бутылку и установить размер. с нетерпением ждем улучшения.)
Amazing work, dude! Really well done! 😃 Stay safe there with your family! 🖖😊
МЕГА ЖУДА ЁКДИ АЖОЙИП РАХМАТ👍👍
久しぶりに拝見した。相変わらず無駄な動作はなく鮮やか。作るものものも一級品。一体この方は相当の学識と経験を積み重ねたに違いない。料理の腕もかなりと想像する。ただし完璧すぎて奥さまがお困りになると想像する。
That seems to be working really well.
Amazing tool! I was hoping to see what your thumbnail picture showed…. I thought you where going to see a spiral cut bottle. Great non the less
Excellent work 👍👍👍 . Thank you for sharing.
Une vieille méthode modernisée par une Adaptation plus moderne et Beaucoup plus Efficace !! Bravo ! pourbl conception de l Résistance !! 👍🏻👍🏾
Мне очень понравилось!) Спасибо за идею!)
Bonjour, bravo c’est une coupe bien nette c’est super. Très bonne vidéo comme d’ habitude Merci JSK -Koubou cordialement Michel 2A France 🇫🇷 Corse.
Наблюдать за вашей работой - отдельное эстетическое удовольствие. Продолжайте, пожалуйста! Желаю вам всего наилучшего.
@taechosobaka
Жыл бұрын
Какой ток подают не подскажете?
@invent5027
Жыл бұрын
@@taechosobaka Это нихромовая спираль, рассчитывать надо для каждой в отдельности, зависит от сечения и длины, такая же спираль в электро плитке.
@taechosobaka
Жыл бұрын
@@invent5027 , спасибо.
@Inlog2023
Жыл бұрын
@@taechosobaka их полно на том же Озоне от 800вт до 1.5 кВт. Какая у автора, не знаю. Главное, чтобы до красна - должно хватить минимальной.
@taechosobaka
Жыл бұрын
@@Inlog2023 , 🤝🏻🙋🏻♀️
It was great my friend. I enjoyed . . Thankful
Muy bonito ,maravilloso ,espectacular y muy nitido . Gracias y felicidades !
Que perfeição. Resistência coincindiu com o risco na garrafa.
Nice work as always. We shared this video on our homemade tools forum this week 😎
Wie immer, sauberer Arbeitsplatz, perfekte Arbeit
i don't know who needs to hear this but there is a difference between "homemade" and having a full workshop inside of your home.
Excelente, el mejor video que he visto de cortadores de botellas
nice work! Hope to see future projects using this device :)
Why do I get the feeling this guy could eat BBQ wings without napkins LOL. Excellent video and not all that complicated.
Excellent video Great work !
Excelente video, gracias por compartir, saludos desde Mendoza Argentina.
Sehr interessanter Bericht über ein (Fertigungs-)Verfahren, mit dem man übliche Glasflaschen bruch- und splitterfrei schneiden kann. In Finnland hatte ich vor vielen Jahren man von einer Künstlerin einen Glas-Becher gekauft, den die Frau aus dem Bodenteil einer Glasflasche hergestellt hatte. Nun weiß ich zumindest ein Verfahren, wie man solche Becher aus einer Glasflasche ferigen kann.
Que capricho!!+ Parabéns! Ótimo vídeo. Grato.
Waouh. The best way to cut glass 👍🤩👍
感谢您的视频。 一个很好的主意。 来自奥地利的问候。/// Thanks for the video. A very good idea. Greetings from Austria.
You are amazing as always!
A 10 my friend, you are amazing 🙌🙌🙌
Good idea, good process, good …. 🎉❤
Complimenti, sei un genio, qualunque cosa tu costruisca, è realizzata con una precisione e cura ingegneristica. ...il migliore!!!
@massimox8256
Жыл бұрын
hai ragione. ma forse esagera un po. si possono tagliare bottiglie a perfezione anche con un centesimo della attrezzatura che usa qui. in una frazione del tempo si costruisce il sistema per tagliare a misura e con il diamante di taglia la bottiglia. poi con una massetta di picchia dal di dentro e la bottiglia si divide. Ma ... a me sta bene che lui faccia di questi ricamini. però non mostra che questo sistema ha una certa erraticità intrinseca. e questo è scorretto secondo me. dovrebbe mostrare anche le volte che i tagli non vengono perfetti. non solo le volte che è venuto benissimo.
Thank for creating these video. 👍👍
سلام عرض شد.. دست خوش .آفرین.
Cool. Don't know when I'd need to cut a bottle; but when I need to, I'll know how. =)
Классная штука. Раньше резал -просто обматывая нихромовую проволоку вокруг бутылки нагревая ей, а затем в воду. Для единичных разрезов хватало. Тут же можно уже серийно запускать резку бутылок.
@severstar3868
5 ай бұрын
при кручивание бутылки....разве не будеть раздавлены спирал ? спсб
Brain is creative and idea is narrative ❤😂😂😂😂😂
Bonito trabajo. Great idea!
Wow, good Master 👍👍
Génial bravo !!!!!👍👍👍👍👍
When I think of precision, I think of your channel! I’d love to see how you would build an MFT - similar to what Festool makes, but with your own unique spin. There are so many bad videos on this subject, but very few good ones. Specifically, people build MFTs that are ok for clamping, but not necessarily to be used for square. They never guarantee that their 20mm holes on 96mm centers are accurately placed. Which always makes me wonder why they go through the process of making so many holes if they cannot be used for accuracy? The reality is that accuracy is not easy, but extremely important!
Amazing, and mind blowing, wow
Нагородил огород не понятно для чего, но наблюдать за работой интересно. На 3 вещи можно смотреть бесконечно: как горит огонь, течет вода и другой работает.:))
@alexbest5903
Жыл бұрын
Оркам этого не понять...
@user-ju1xm5sx2m
Жыл бұрын
@@alexbest5903 да, такое понятно только великим украинцам.
@y1256l
Жыл бұрын
@@alexbest5903 Да да, орки делают проще, силикатный блок с зарезом, канавка для спирали и реж бутылки. Только особо одаренные херней маются и майданы ходят с подскоком.
@vytautasstravinskas8997
Жыл бұрын
s pervimi punktami soglasen - voda ogon eto da... no smotret na to kak drugoi rabotaet i poluchiat ot etovo udovolstvje... nieznaju eto bole dlia ruZZkix. Drugim narodam eto nieaktualno... mentalitet drugoi.
@y1256l
Жыл бұрын
@@vytautasstravinskas8997 Да, с менталитетом у вас все хорошо. ЛГБТ, однополые браки, замуж сама за себя, зоофилия - это отличный менталитет, в духе гейропы.
Very good idea, I have the boards, it remains to buy the rest of the equipment and tools
Hola! fantástico! los vendes? ;) gracias, saludos
Good stuff! Perfect every time - 🎈📌
Excelente video amigo, para la descripción de los componentes eléctricos, donde lo consulto?, Saludos desde Guatemala 🇬🇹🇬🇹🇬🇹
Ok. I thought of making one , but you made it before me:) I would humbly suggest putting a SS or other alloy in front of the elements in order to prevent abrasion and long term longevity . Thoughts?
What are the specs for the heating element used? 230v, 2000W?
Great work❤
bravo maestro!
tnx for sharing, its a great idea. new friend n supporter, stay safe n connected
Ok. So same idea. Faster and cheper. But less engeneer : wrap a wool twine around the bottle where you want to cut. Put rubbing alcohol on the twine. Light. When the wool and alcohol is burnt, dunk in ice water. (You make micro fracture with a dimond blade too to start) Great video
BRAVOoooo,SENSEI!!!!excellent MASTER of ALL,Art SHGUNOBU!!!!!🙏🌅🙏🌅🙏🌅🙏🔋🌿🔋🌿🔋💎👍💎👍✌️🎓✌️🎓✌️
did you etch the bottle with a roller glass cutter before the heat was applied? Always very good videos👌!
@gsp911
Жыл бұрын
Yes, he just "forgot" to show that. I don't know why he don't show it, maybe to make others try this and fail. That way he will seem better than them. Disappointing. Sad impact social media and views have on most people.
@woodywood1951
Жыл бұрын
@@gsp911 dud, you have a problem
@gsp911
Жыл бұрын
@@woodywood1951 dud, ok
@jeremiahbullfrog9288
Жыл бұрын
yes very disappointing, i never caught him cheating before, now i am skeptical of all his projects
@woodywood1951
Жыл бұрын
@@jeremiahbullfrog9288 he does not cheat... He did show this part of the movie... Anyway, most of the people understood that...
Genial parabéns!!!👏👍🤌
Ola mi amigo bueno el invento pero muchas máquinas y no las hay, gracias de todas maneras que esté bien Desde riohacha la guajira Colombia
Идеальная идея. Супер. 👍👏👌✊🤜🤛💪🤝🌟
@hugo_dog9898
Жыл бұрын
Я вот не понимаю зачем и для чего резать бутылки?
That is a terrific concept (and execution). I only wish it would work on bottles that are not cylinders. Getting an oval or square or irregularly shapped bottle to lay flat like that doesn't work very well. I'll have to make one that works in an upright fashion so that the bottle can remain flat while it is being turned. 👍
@spycedezynuk
Жыл бұрын
You could use a soldering iron and straight edge or a rail with a carriage to slide it along
@Inlog2023
Жыл бұрын
Квадратную можно не крутить, а переворачивать на 180°, прогрев две стороны.
@DieDoeDa
Жыл бұрын
For irregular shapes you can use this old trick: Put a line of yarn on the intended cut line, soak with some lighter fuel and set it on fire, wait a moment and then submerge the bottle into a bucket with water, to introduce the needed thermal stress that then fractures the bottle along the hot line created by the burning yarn.
@Inlog2023
Жыл бұрын
@@DieDoeDa I tried this method for 3 times (3 bottles), and got no positive result, no clean edges (( Don't know why
Great work. A+++
very nice thanks for sharing. I would like to see more details on that vertical panel saw of yours, please.
@jisakukobo
Жыл бұрын
kzread.info/dash/bejne/fWmpo9Z7h7e_Y7Q.html
video shows that prepared tool is working very Nice , I request to give details of required items to prepare this tool, without all required items ready on hand one can not start to prepare such tool.
That is very cool!
Excelente maestro
I love your precise work but regarding this project I'd rather prefer a diamond blade. Plus I don't know how to build such a power device
Very very gooood work brother. Congr......