i like that it's a christian pc

@brivera

Жыл бұрын

Yes you got it! 😄

@BenYasser

Жыл бұрын

It's gay, it go too many RGB (just kidding).

@CR055FIRE

Жыл бұрын

@i_am_a_real_cat1443 i have a sweet christian crack pipe

@fallen8272

Жыл бұрын

@@BenYasser ;-;

@venusroses

Жыл бұрын

No bc as soon as i saw “holy spirit” i instantly followed

I also got this case in black and im loving it so far, it looks good and the temps are cool. Great content 🤙

@brivera

Жыл бұрын

Thank you! Same feeling it's really nice 🙌🏼

this is a literal work of art. I love it

@brivera

Жыл бұрын

Thanks so much!

what a great looking pc...well done on the build for sure.

@brivera

Жыл бұрын

Thank you so much!

Looks great, I hope you had fun putting it all together! Just one thing to be careful of; the AIO tubing presses against the graphics card which can be dangerous over time. To reduce risks of leaks, angle the tubing so that it isn’t resting on the card. Other than that, it’s a great build and I hope you get a lot of use out of it!

@brivera

Жыл бұрын

Thanks for the tip !

so cleant love it hope one day can build white as well the illumination and Diffused of the light nzxt fan so amazed rare fan you see like this.

@brivera

Жыл бұрын

Right! So glad that you like it 🙏

Great work, very good !!!

@brivera

Жыл бұрын

Thank you 🙏🏼!

Nice build! Whenever I install the psu in the case, I make sure I already attached the cables to it so I would not need to deal with it later in tight space.

@brivera

Жыл бұрын

Great tip! Thanks

Love it, good build girl. I like the new NZXT b650 board with the new Ryzen 7000 series. I wanna upgrade to that, soon. Good choice with NZXT

@brivera

Жыл бұрын

Thank you ! 😊 I love it it's a good choice

Nice build!!

@brivera

Жыл бұрын

Thanks so much!

This is relaxing

@brivera

7 ай бұрын

Thank you!

amazing pc build video, very well done and relaxing 👌

@brivera

Жыл бұрын

Thank you so much I appreciate it 😊

The AIO cables should not touch the graphic card due the heat but......all gorgeous. It's a masterpiece what you've done here.

@brivera

Жыл бұрын

Thank you I appreciate it 🙏🏼

Amazing build. About 3 weeks ago I also built a pc in the same case (black) but using different parts. Case itself is very cool, I have kraken elite as well, amazing AIO with amazing screen😊

@brivera

Жыл бұрын

Thank you so much! I hope you're enjoying your PC as much as mine😄

💜

@brivera

Жыл бұрын

🙌🏼🙌🏼

@lun4rkid

Жыл бұрын

Is NZXT Mbs durable

@brivera

Жыл бұрын

​@@lun4rkid We'll see :P I just got mine but I heard good comments

@lun4rkid

Жыл бұрын

@@brivera 😊👍

@ertgb_

Жыл бұрын

@@lun4rkid First ones were total ass, but now ASRock makes the boards, and NZXT makes the covers, so they are very high quality now. My ASRock motherboards have all been perfect for years, so I would recommend it.

Very good 👍🏻 ... i think this is my next build ... 🤗 ... thank you ✌🏻

@brivera

Жыл бұрын

Thank you so much! I hope you can be inspired by this one 🙏

Dream pc right there. I’m playing fortnite on my school laptop. That build is amazing! God bless you

@brivera

Жыл бұрын

Thank you so much! God bless you !

really like the build its so nice . sadly for mine i had to the graphics in black because the pricing was so much better for the black version , but everything else is white like yours :)

@brivera

Жыл бұрын

Yeah I feel you! Thanks so much

Nice build! 😍👍🏻👍🏻👍🏻

@brivera

Жыл бұрын

Thank you ! 🙌🏼

Really Appreciate it 😌

@brivera

Жыл бұрын

Thank you 🙏🏼

سلیقه خوبی دارین و بسیار زیباست 🌠✅

@brivera

9 ай бұрын

خواهش می‌کنم! اگر سوال یا نیاز به کمک بیشتری دارید، لطفاً بپرسید.

SICK!!!!

@brivera

Жыл бұрын

Thank you!

Echt schöner Build :)

@brivera

Жыл бұрын

DANKE!

love it!😍

@brivera

Жыл бұрын

Thank you 🙌🏼

This is exactly how I want to build mine, looks so good🤍

@brivera

Жыл бұрын

Thank you! 🙌🏼

Looks gorgeous

@brivera

Жыл бұрын

Thank you! 🙏🏼

oh this is so nice! mine is the exact same case, same gpu and i think cpu, but everything except the case is black because i just couldn't afford the white versions :') saving this video for a time when i have a bit more money hehe

@brivera

Жыл бұрын

I totally understand haha!

W BUILD LOOKS REALLY NICE

@brivera

Жыл бұрын

Thank you!

Aí sim eu do valor ♥️👍👏

Dope aio gif 👌🏼!

@brivera

Жыл бұрын

Thank you 🙏🏼🙌🏼

CLEAN

@brivera

Жыл бұрын

Thank you !

so jeleous on this pc 🔥

@brivera

Жыл бұрын

So glad that you like it, thanks!

Wow! Que bonita te quedo 😍

@brivera

Жыл бұрын

Thank you sis ❤

Wow malade bro trop pro 🔥🔥🔥

@brivera

Жыл бұрын

Thanks bro 🙌🏼🙏🏼

❤❤❤ that is a good locki g pc😮

@brivera

9 ай бұрын

Thank you so much!

Come Holy Spirit! Love that

@brivera

Жыл бұрын

Yes 🙏🏼🔥

Quedé enamorado de tu ensamble, próximamente armaré el mío con 4060ti, perdóname pero planeo robar tu ensamble!

@brivera

Жыл бұрын

Dale jaja! Gracias !

Is there a lian li 8pin only strimer plus? I only see 8x2 pins on Amazon?

@brivera

Жыл бұрын

I don't know to be honest. I just separated mine in 2

super dope.

@brivera

10 ай бұрын

Thank you!

Nice job 😊

@brivera

Жыл бұрын

Thank you! 😄

Nice set up! Where can I find the white thig that support the graphic card looks cool!

@brivera

Жыл бұрын

Thank you! I bought it on amazon. Here's the link: amzn.to/3oUkUWA

Very beautiful. 👏👏👏

@brivera

11 ай бұрын

Thanks so much!

Muy elegante la pc.😊

@brivera

Жыл бұрын

Muchas gracias ☺️🙌🏼

It's so good😊

@brivera

Жыл бұрын

Thank you appreciate it!

Hello, @brenda rivera I couldn't find ram you use in nzxt memory-qvl.pdf. could you please let me know how you make them work?

@brivera

10 ай бұрын

You really have to place them in slot 2 and 4. Otherwise it won't work

Beatiful build. Nice touch on the Cooler too. Is this a gaming or productivity build? And if I may ask, why did you opt for AMD not intel?

@brivera

Жыл бұрын

I would say both ! AMD because it's cheaper!

Cool!!

@brivera

Жыл бұрын

Thanks!

Love the build I have sourced all the parts and going to attempt myself,watched a video on nexus said mounting radiator with inlets at top causes longevity issues? Also any other tips ?

@brivera

Жыл бұрын

Go for it! Make sure all the parts are compatible with your motherboard that's the main problem for some people. Search a lot and everything will be fine

@excalibermax

Жыл бұрын

@@brivera more or less got the same parts b650e motherboard I really like the white theme ! Is the software easy to control for the lian li strimmer rgb ?

@brivera

Жыл бұрын

@@excalibermax Yes you can't control it on the NZXT CAM software but it should work on your Lian li software

Would the Lian li strimmers be ok so close to the radiator - Only asking because I am close to building mine soon. 2 parts away!!!

@brivera

Жыл бұрын

I didn't notice any problem for now 🙌🏼

The way you installed the motherboard was a little sketchy but it's a clean build

@brivera

Жыл бұрын

I can see why you say that but don't worry it was well installed 😄 Thank you though!

this is the cleanest, most religious pc i ever seen 😳

@brivera

Жыл бұрын

Thanks so much!

Great PC! But i think you putted the ram wrong if you want max preformance from ram put to 2 and 4 slot not 1 and 3.

@brivera

Жыл бұрын

Hey thanks! Yes you can see in the video reveal that they are at 2 and 4 :)

Could i made an push and pull in my IO on front from this case?

@brivera

8 ай бұрын

I would say it's kinda tight in this case. It's not the biggest case

i hope you have moved that radiator to the top of your case by now if you will experience pump failure

@brivera

4 ай бұрын

I cant' it's too big that's why I put it on top. But still works perfectly

I have two questions. With a build like yours, which fans go out of the case and which go into the case? And please tell me, what is the temperature in the case, in a stress test with this set-up?

@brivera

Жыл бұрын

1.Intake: front fans and all the others are exhaust 2.cpu: 85 in a stress test

8:47 AMEN!

@brivera

Жыл бұрын

🙌

do dominator ram sticks and lian li cable extentions work with NZXT cam software?

@brivera

8 ай бұрын

Unfortunately no... we have to install their own software

@jr_py_dev

8 ай бұрын

thnx@@brivera

I love this video! 1:43 - DIMM A1 B1 (kidding me ?) 8:09 - DIMM A2 B2 (What happened, the DIMM A1 B1 didn't start?) 🤣🤣🤣

@brivera

4 ай бұрын

Exactly what happened! You're such a genius

tell me, and h5 elite will be able to get up AIO X63 ?

@brivera

Жыл бұрын

Yes, but it won't fit on top. You'll need to install it vertically

Holy spirit 🔥

@brivera

8 ай бұрын

Yes amen!

Wow! dope pc Build

@brivera

Жыл бұрын

Thank you! 🙏🏼

@tayeshotthat

Жыл бұрын

@@brivera yw I just build my pc too

@brivera

Жыл бұрын

@@tayeshotthat Nice you should share it on your channel!

@tayeshotthat

Жыл бұрын

@@brivera i will im start a new gaming channel soon

@tayeshotthat

Жыл бұрын

I just sub to you on my new channel

this is my dream pc

@brivera

8 ай бұрын

Wow thank you !

@ImPin

8 ай бұрын

@@brivera no problem

i have nzxt h5 elite and nzxt cam but i dont have that same rainbow mode can someone tell me how to get

@brivera

Жыл бұрын

You should have it in the NZXT Cam

What do you have the Lianli strimmer cables connected to Cus don’t u need the hub?

@brivera

6 ай бұрын

Not really I don't expect plugging something else

@ZahirKhan-ib2pq

6 ай бұрын

@@briveraso what did u plug the into Cus I’m thinking about doing the same thing

@brivera

6 ай бұрын

Basically I plugged the rgb cables on the hub everything else on the motherboard@@ZahirKhan-ib2pq

ficou lindao top demais

@brivera

Жыл бұрын

Obrigado!

Sigue asi, ✌✌✌✌

@brivera

Жыл бұрын

Gracias!

Im building something similar except I can’t afford and aio and a 7700 im going with the 5700

@brivera

Жыл бұрын

I'm sure it'll be nice!

I’m just here for the peel off🔥🤷🏽‍♂️

@brivera

10 ай бұрын

Haha I hope you enjoyed it !

@TitanWave1

10 ай бұрын

@@brivera 🌹🔥

@TitanWave1

10 ай бұрын

@@brivera 🤣🤣🤣🤣🤣yup

I have the same case and love it. Did you separate the dual 8 pin rgb cable so you only have 1 8 pin cable? I can only find 2 8 pin cables and my gpu only uses 1 8pin connector like yours.

@brivera

Жыл бұрын

Yes that's exactly what I did it comes with 2 8 pin but I just separated them and it works fine 😊

@Fonseeker

Жыл бұрын

@@brivera ok what did you do with the other 8 wires as it seems on one end it can't be separated?

@brivera

Жыл бұрын

@@Fonseeker That's right you can't completely separate them. I just hid the other part in the back

@Fonseeker

Жыл бұрын

@@brivera Thanks!

Cable management? If you can't see them, they don't exist I usually press my feet against the panel while trying to slide the panel in 😄

@brivera

Жыл бұрын

Hahaha I feel you but I had to do an effort lol

cable managment 😵‍💫

@brivera

Жыл бұрын

Tips??

Nice 😊

@brivera

Жыл бұрын

Thank you! ☺

Im planning to buy this buy want my AIO to be mounted on top, is it possible?

@brivera

9 ай бұрын

This AIO is too big to install it on top unfortunately :(

I dont know maybe this is a motherboard im not firmiliar with but all the boards ive worked with (ive build 5 pc's) the ram goes in the 2nd and 4th slot not the first and third

@brivera

Ай бұрын

Yes they were misplaced you can see at the end that there are at the 2nd and 4th

@metlingaming9162

Ай бұрын

Ah nvm i see u changed it at the end

How do you feel about that gpu gigabyte version. I've been hearing a lot of negative comments, just wanted to get someone else's opinion. Thank you. Dope build btw.

@brivera

Жыл бұрын

Thanks 🙏🏼 tbh so far so good! I'm really satisfied I got no problems for now

Hello, does the front part come with a dust filter?

@brivera

10 ай бұрын

Yes!

@_PatrickOliveira

10 ай бұрын

@@brivera Muito Obrigado!

I’m a noob when it comes to pc builds what is the circle thing that says 27 liquid?

@brivera

Жыл бұрын

Hi! It's the temperature of the CPU liquid cooling

@EditHandIe

Жыл бұрын

@@brivera oh really cool thanks !!

Yeah... that CPU can definitely handle a significantly stronger GPU.

@brivera

Жыл бұрын

Yes it does

How did you get this to work? I got the 8-pin GPU one and it gave me 2x8pin at the GPU side and i have one of them not even plugged in since my GPU only uses 8pin (RTX 3060) so the other is just hanging next to it... but you have just an 8pin single? The lian-li led connector is attached to both of the 2x8pin's so i'm not sure what to do... any help would be appreciated How did you split it from the 2x8 while keeping the lian-li led connector attached? or is it just hiding in the back? Edit Ah también hablas español 😅

@brivera

3 ай бұрын

Hola! Si esta escondido atrás lo hice igual como dijiste

@MashuTeo

3 ай бұрын

​​@@brivera Muchas gracias 😊

So for the fans in your finished build, do you have three 120mm's or one 120mm and two 140mm's

@brivera

Жыл бұрын

Three 120mm and two 140mm in the front

@kaceyemmer

Жыл бұрын

are the 140mm fans part of the CPU cooler

@brivera

Жыл бұрын

@@kaceyemmer Yes !

Why didn't you install the aio on top ? It would look even cooler if you would have but if you were having issues in installation of aio on top due to ram then i can understand after all Corsair dominator are very big ram modules. Anyway the build looks amazing nice job.

@brivera

Жыл бұрын

Hey! It's too big that was my first desire but it's not possible on this case

@YashTheDon

Жыл бұрын

@@brivera ok i understand but build look amazing anyway

Hello how to remove that glass on the side?

@brivera

4 ай бұрын

Hi! There's a screw on the back that you need to remove then you just have to pull it over

Good job girl! Such beautiful pc

@brivera

Жыл бұрын

Thank you so much! 🙏🏼🙌🏼

Have a good time need for you=)

Hi, just wondering I bought this case as I’m building my first pc in the next 2 weeks at the earliest and I’m thinking of buying 2 fans so they sit at the top like you’re, does the front fan have rgb already so I only need to buy 2?

@brivera

11 ай бұрын

Hey! the case doesn't come with the front fans. Only the one in the back (that isn't rgb) and the one at the bottom (also not rgb)

@F1george48

11 ай бұрын

@@brivera thank you, so buying 2 f140 fans is good so I can put that on the top of the case, take the back ones off and put the water cooler in

@brivera

11 ай бұрын

@@F1george48 the f140 won't fit on the top. I did the same mistake and had to get f120 for the top. The f140 only fit on the front

@F1george48

11 ай бұрын

@@brivera Thanks for that that’s great to know, sorry for all the questions but should I just get 2 f140’s for the back and put my radiator on the top, would that work? Sorry I’m all new to this.

@brivera

11 ай бұрын

No worries! So basically if you put your radiator on the top make sure it fits because you can't put a radiator with 140mm fans that's for sure. I wanted to put my radiator on the top but it was too big so I installed it on the front. Here's what I did: 1x 120mm fan in the back 2x 120mm fans on the top my radiator in the front with 2x 140mm fans @@F1george48

How much was this build with all of the rbg? Im thinking about saving up extra so i can get almost everything rgb for my first pc build.

@brivera

10 ай бұрын

It was almost 3k

@rileyperkins6279

10 ай бұрын

@@brivera OH 🤯

Esa ddr5 están mal puestas esa placa trae incluso un diagrama en donde dice que si solo colas dos uses primero el slot A2 y B2

@brivera

3 ай бұрын

Hola si pero al final estan bien puestas

Sister does the fans are rgb or argb and how much argb and rgb connectors are available in motherboard can you please tell cause i also want to build this pc.

@brivera

Жыл бұрын

Hi! They are RGB. This motherboard has 2 ARGB connectors and 4 NZXT RGB LED connectors. You can also buy a hub if you need more.

@anilnikhra

Жыл бұрын

Thank you sister for your help

What did you use to control the RAM RGB?

@brivera

11 ай бұрын

The icue corsair sofware

how do you manage the colors in the case?

@brivera

Жыл бұрын

Using NZXT Cam app and the Lian Li app

Hello I want to buy my first pc gamer but idk how to start, any tips where to buy it? I always play on x box or laptop but I really want to stream videos games, lol.

@brivera

Жыл бұрын

Hey! If you are new, you can build your PC on newegg: www.newegg.ca/tools/custom-pc-builder They show you the components that are compatible with one another

@ertgb_

Жыл бұрын

PCPartPicker and micro center have builder tools as well, I try to stay away from newegg after they knowingly shipped me a motherboard with bent pins.

@_Warache_

Жыл бұрын

@@brivera thank you!!!

@brivera

Жыл бұрын

@@ertgb_ No way :O

nice clean build , how do you like the case? i was considering going with this case for my build

@brivera

Жыл бұрын

I like it! It's a good price quality case

@MrEfrey272

Жыл бұрын

@@brivera nooooiiiiceeee ya i went with a different one since this one was out of stock

@brivera

Жыл бұрын

@@MrEfrey272 Let me know which one you chose!

@efrey2721

Жыл бұрын

@@brivera I did a lian li concept

@brivera

Жыл бұрын

@@efrey2721 nice!

i love your hands

@brivera

Жыл бұрын

Thanks!

Lindo demais

@brivera

Жыл бұрын

Gracias!

Hello if i'm not mistaken, you've installed the ram in the wrong slot

@brivera

Жыл бұрын

Hey! If you see the last video reveal you can see that they are installed in slots 2 and 4

The housing set includes 4 fans????

@brivera

6 күн бұрын

Only 2 fans. The one in the back and the one at the bottom

looks lovely but the AIO cables should be on the bottom of the radiator and on the bottom of the pump

@brivera

Жыл бұрын

Hey! It's not a must but for better performance I agree with you. Still works perfectly on my end

Hello awesome build. How much did everything cost. Thanks again.

@brivera

Жыл бұрын

Hey thank you! Almost 3k

why front mounted aio?

@brivera

3 ай бұрын

Because didn't fit on top

Love the design but only want it to be single color blue. RGB is a little to much for me.

@ertgb_

Жыл бұрын

Good thing that's easy to do :) blue is my favorite color so I used it for all my RGB.