DIY SEMI, TRUCKING AND MORE • 59 seconds ago For great fuel discounts with no fuel card required, watch this video! kzread.info/dash/bejne/fp52l7tvYNOXoaw.html

Awesome, Im gunna get a bypass filter for my cummins isx. Thanks for the video man.

I have a vintage, bypass, oil canister filter on my 1953 Hudson. Not a perfect filtration system but certainly better than nothing.

Great video. You explain and demonstrate. Good job!

Good informative video. Been very happy with the bypass system. Change oil every other year. Sample every 25k. Easy system!

Thanks for making real informative videos man keep up the good work 👍

Looks COLD there. Great info!

Great video! I would add that it's good to make sure the orifice is in the filter and even make sure you get normal oil pressure when you first start the engine...

@DIYSEMI

3 жыл бұрын

Thanks for the ad

Great video. You might even be able to run that bypass filter longer than 20,000 miles. A trick I picked up from another Amsoil dealer ... try feeling that filter carefully mind you don't get burnt , but try feeling it. they generally will fill the media with contaminants from the bottom up so usually as the filter begins to fill with contaminants the bottom part of the filter will be cooler than the top part of the filter and you can kind of use that as a rough and dirty method to figure out when the filter is nearing full capacity. But again like you said do what works for you glad you are protecting your engine!

@DIYSEMI

4 жыл бұрын

i actually do , i just don't want to tell someone else to do that, for reasons of protecting myself, if you understand what i mean.

@DIYSEMI

4 жыл бұрын

stay tuned, im testing the dominator coolant boost in my truck right now, video soon!

@wiredforstereo

5 ай бұрын

I have never seen or heard of any oil filter becoming that full.

Thank you sir for all the knowledge you share God bless you endless

@DIYSEMI

Жыл бұрын

So nice of you

Mine is in the shop for an inframe, a bypass filter is going on it when I get it back. Only thing I wish we could have saw, was the point on your system where the oil was being taken from. But thanks for the info!

@wiredforstereo

5 ай бұрын

Many spots on big diesels. Oil pressure sender, compressor oil supply, turbo oil supply, random oil galley plugs in the block, etc.

I always liked the ideas of these, my concern is that if the bypass filter is removing things down to very small particles, couldn’t it skew the results of an oil sample and hide things like excessive wear or an ongoing internal failure? Ex: the bypass filter is removing the metals from a failing main bearing.

@DIYSEMI

Жыл бұрын

I understand your concern. Another theory is that by keeping those smaller partials out of the oil, it keeps those wear causing particles from causing that main bearing to fail. Yes I also understand there are other causes of bearing failure. You will still see if your wear metals are elevated if you take the sample before the filter

Interesting

@tyronebyrd919

4 жыл бұрын

Im gonna do that too..lol

I just did 80,000 miles on 1 oil change. all I did was top off the oil after changing the filter. Clean air fleet bypass oil filter and Amsoil 5w30. Cummins x15

@DIYSEMI

3 жыл бұрын

I've gone farther too, but I can't tell folks they should because they will blame me for things. I love amsoil too. I did 110 k once

Don't forget to write down the date and mileage down on the filter itself helps out

Some Detroit engines have gone over a million miles with no oil drains using the Gulf Coast paper towel filters. Ii think the reason they can do that is the make up oil added at filter change. Engines need enough new oil added. Shell oil was studying a Series 60 Detroit with 1 million miles with 1 oil drain. One engineer made the remark that it's not unusual for these engines to go a million miles but not be in near new condition. I was talking about it on a forum. Road King called me and asked for the owners phone number. They did an article on it. Pepsi of Gulfport Mississippi owned it for a long time and sold it to a guy that hauled motorcycles. He agreed to let Shell keep the testing going. They tear it down measure the parts put it back together and put the used Rotella back in. One time someone forgot to tell a mechanic to save the used oil.

Wassup DIY, How long does your Detroit engine oil last before you start to see it turn black with this bypass?

@DIYSEMI

3 жыл бұрын

About a day. For some reason Detroit's must not drain all the old oil completely.

DIY where would you mount your bypass if you had to do it again? I have a 2012 Columbia Schneider glider. I had OPS system on my '94 May check out this system. Thank you for a great video.

@DIYSEMI

3 жыл бұрын

Hmmm. Probably behind the cab on the frame rail. Somewhere protected...yet I can still easily get at it.

@leeetibbetts9349

3 жыл бұрын

@@DIYSEMI Thank you for your response. That's a lot of plumbing, but it makes since.

When you put your new filter on, was all the oil drained from the engine? I have the same Ams Oil bypass system. Just changed the oil but didn't change my bypass filter, and I'm pretty sure I should put a new filter on. Hoping I can replace it without having to drain the entire system or waiting till my next PM..

@DIYSEMI

3 жыл бұрын

You can replace it at any timr. No need to drain the oil

@jameshopkins9619

3 жыл бұрын

@@DIYSEMI thanks!!

After watching this video I got me one amsoil bypass filter just got it same engine Detroit series 60 12.7 but I don't know how to install from oil port to oil pan can you please show how install yours thanks for the info

@DIYSEMI

4 жыл бұрын

Ok, i will get that done. I will get back to you.

@DIYSEMI

4 жыл бұрын

Please email me at diysemi@yahoo.com . When I get the video ready I will email you a link right away.

Hey DIY, would mind sharing the oil brand of synthetic oil you were talking in this video? Also, what store does it have on sale now and then? I know it's been a couple of years(the prices shifted BIG time) since the video was shot, but still I'm super curious. TIA

@DIYSEMI

Жыл бұрын

you mean amsoil? www.amsoil.com not sold in too many stores, some have it tho. open a wholesale account with them and you will get a discount

@rbk77

Жыл бұрын

@@DIYSEMI I'm not sure. At 13:53 timestamp you are talking about some brand that you are buying at a local store with a decent discount. I was just curious what it was.

Where do you Plumb it in on a c 15 cat?

@DIYSEMI

4 жыл бұрын

I had a c15 back in 2003 that i put a gulf coast filter on. I cant remeber where i plumbed the return to. Probably the oil pan. For the supply i found an extra plug in the oil galley i remember it was in behind the oil dipstick on the block. I know that doesnt help much, but im sure someone in here can be more specific. There are a few extra plugs in the oil galley on the motor. As long as you dont tap into the supply line for a component, it should be fine....i.e. Dont tap the supply line for the turbo. Im sure you already know it though.

Which Amsoil system did you buy? Thanks for the video.

@DIYSEMI

7 ай бұрын

Bmk 30 I think it was

Do you have a way to get better fuel on a 2007 Columbia? And great info thanks

@DIYSEMI

4 жыл бұрын

Email me diysemi@yahoo.com. I cant post that here

@tyronebyrd919

4 жыл бұрын

Thank you

Do you have to pour fresh oil into the filter when replacing it?

@DIYSEMI

3 жыл бұрын

On the bypass filter you do not need to. You can if you want though. The reason you can get away with not doing it is due to the very low flow rate.

@jameshopkins9619

3 жыл бұрын

@@DIYSEMI Got it, that make sense. Thanks!

@kjaques1

2 жыл бұрын

Still have to top the oil off though surely?

So amsoil sales the filrter what filter u used

@DIYSEMI

4 жыл бұрын

They sell all of it...filter, base, hoses, sample kits. Everything you need

Can you post the link where to buy it

@DIYSEMI

4 жыл бұрын

Www.amsoil.com

@MikeTrullAmsoildealer

4 жыл бұрын

www.amsoil.com/p/heavy-duty-bypass-system-bmk30/?zo=1463115 If you add the $10 preferred customer membership to your cart it will drop the price by 70 bucks or so.

You would think if they wanted to sell more they would drop the price point down to under 300 instead of 500+ or more.

I'm still running with my by pass system , are you still running

@DIYSEMI

Жыл бұрын

Yes

Ever look into a reusable/cleanable centrifugal bypass oil filter?

@DIYSEMI

3 жыл бұрын

I have, i like them too. I had a couple other ones, not that its a huge deal, but i was really looking for something cleaner and easier. I yhink any of them will serve a guy very well. Certainly better than nothing.

@JohnCamp

3 жыл бұрын

DIY SEMI, TRUCKING AND MORE fair, canisters do serve the simplicity department well, but the higher grade of cleaning and the reusable nature of centrifugal cleaners id reckon would make the complexity worth it, id never buy one with disposable single usage rotors.

People want to argue? Surely not hahaha

“12.99 for a gallon of synthetic oil!? Sounds like your buying it from my favorite store #Raul King.”

@DIYSEMI

4 жыл бұрын

Fleet farm. a chain in upper Midwest. Has sale for 15.99 and the an additional mail in rebate. One time it was down to 8.99. But only once. They have delo,delvac, or rotella. Each on sale at different times.

@tpfmike1976

3 жыл бұрын

Buy the gallons on amsoil website. Become a member. 20 bucks a year. You save mobey. Check it out

There seems to be 100's of these bypass installs on youtube. But very few results videos. The one or two results videos I've seen didn't seem to be very good. The oil stayed jet black. So until I see more positive results I'm voting no on this one. And I'm seeing a lot of install videos with comments turned off ?!?!?! Hmmmm ?!?!!?!?

@DIYSEMI

Жыл бұрын

The oil will always go black. Discoloration is not contamination. It's like trying to filter the color out of Kool aide. I have oil samples to compare before and After. That's really the only way to compare. Really nothing more to show than that. I have torn down my cat that ran a bypass, before KZread. No deposits or sludge. Minimal wear after 900k miles. Needed a head gasket. Not a real exciting topic

I like your videos and learn from you but I think you are off on the science @ 8:40. You want to take oil from the oil pan to see how the system is working. That is the oil you engine is seeing/using. The super filtered oil might or might not flow and clean as good as the manufacturer says.

who wants to hear that horrible music?

@DIYSEMI

Ай бұрын

Your mom