That's a mouth full of Red goodness, Great job Rob.... HAPPY NEW YEAR!

Not sure how I feel about TTI's market dominance at times; but that's pretty damn impressive for one year.

@jaredkiser6578

6 ай бұрын

Imagine what next year will be like since it's their 100th anniversary.

@jack12343

6 ай бұрын

Especially since TTI is controlled by the Chinese Communist Party. It’s called soft diplomacy, infiltrating and influencing the US market by buying up US companies and selling their products to Americans.

@channelx92

5 ай бұрын

I will admit that as far as power tools go Milwaukee makes some quality tools. I am dumbfounded on how they accomplish this when tools are made in China. I heard that there is quality control that watches over the other division of quality control. The Chinese are more known for "close enough for who it's for". The who it's for is anyone willing to buy it. Besides the brand new very limited USA made hand tools you couldn't give me a Milwaukee hand tool. The number of Milwaukee power tools that I have I double that number in USA made DeWalt power tools. I feel better keeping people working here in the US than elsewhere. I'll put any of my DeWalt tools up against any Milwaukee equivalents any day. The US government considers China our biggest military threat on the planet so let's all do our part in contributing to that 500 billion dollars a year they get from the US buying their garbage. If you're lucky some day you'll be able to say, "see that missile coming straight down at us? I helped pay for that". Don't get me wrong about DeWalts Chinese garbage hand tools either. They are junk. Milwaukee or DeWalt s till don't know how to make bits that are even remotely worth a shit. I will go out of my way, order something if need be, and even pay a little more for USA made tools/products. There is no comparison in quality. The USA DeWalt power tools are marked as such and they are select items. My 1/2" drive monster impact, 3/8" drive impact, sawzall , hammer drill, and regular 1/2" drill are all 20v brushless assembled in the USA with domestic and global components. If it's not made in the USA their next best is made in Mexico. Still better than China. All other reasons aside except the quality of Chinese tools should speak for itself. I found myself in a bind needing a size 00 triwing bit on a Sunday. Good old harbor freight was the only place that had one. It actually came in a kit with a driver and a bunch of bits for $7. I didn't care about the other shit. I got home and that 00 bit wasn't even close to the right size. The finish was all goobered up and it was total trash. One other concern I've always had regardless of whose tool I'm using and that's fluids entering the tool through the vents. Transmission fluid, gas, and oil would most certainly destroy something. The good old Snap On pneumatic tools I just spray them off with brake kleen and it cleans and polishes them. I will say this I have a friend who does concrete and they use nothing but DeWalt. I asked why and he said after watching them get soaked with water or dropped in wet concrete and still function fine afterwards is what sold him. I also saw a video of a guy repairing a ruptured water main. When he was done tightening down this sleeve he just threw his impact in a miniature pond that had formed and it still worked after that. I can't believe that with Milwaukees rich history of making quality US tools that no US company stepped up on that purchase. It's almost as bad as the deals falling through for Shop Vac. It's now officially a Chinese owned company after being here for how many years. People that other brand name vacuums still refer to them as shop-vacs. I have a 20gal 3hp shop vac I received in 1991 or 1992. It still works like the day it was new. I believe I can take this older shop vac with a 3hp motor and suck up these new 5 and 6hp vacuums that are out there. The USA made ones are slowly being purchased and the new and improved shop vacs are made in China without the lifetime warranty. I went and purchased the largest USA made one I could find because there will not be anymore. All our businesses that took pride in the quality products they made and have been around forever are slowly being bought off by a country that we already don't want to enable them by fattening their pockets anymore. I believe it was in the early to mid 60s that I heard the US once made 60% of all the products in the world. I guess over here we get dumber as time goes by and we can't even make a junk piece of plastic phone that costs $1,400 to buy and probably $200 to make. Any us company that makes their start in the US by selling to US customers should have a hefty tariff put on their products once it returns to the US. Sorry about the rant everyone but I feel eventually people over here will forget how to wipe their asses next. Let's keep Americans working not some Communist country. If we're we to sever all ties with China and act like they never existed they would probably come close to extinction in 10 years or less.

@jack12343

5 ай бұрын

​@@channelx92 I care less about where it's made and more about who owns the company. Milwaukee is owned by TTI which is Hong Kong based which means it is effectively controlled by the CCP. It's no secret that the Chinese Communist Party uses companies to exercise soft power diplomacy and influence over foreign economies. American's need to wake up and acknowledge Milwaukee Tools is no longer American and consider its dominance of the US market as a CCP controlled company. It's ironic that a red tool brand is controlled by Communists and Americans are too ignorant/apathetic to care.

Thank you for all that you guys did this year differently much appreciated can’t wait to see the new tools next happy New year thank you for all the hours put into your show and for the Hard work.

@ToolShow

5 ай бұрын

Really appreciate that man.

Wow, what a bunch of great new Milwaukee tools!

You guys are freaking great!!! Second episode I'm watching and I LOVE THE CHANNEL! Good luck with future episodes!

@ToolShow

5 ай бұрын

Appreciate you watching! Part 2 of our World of Concrete show is this Friday!

Thanks for the video😊

I honestly enjoyed the video and found a few things i need to buy as they will be very usefull to me ans how i do my work. Thank you rob and Sarah!!

Happy New Year!

Great video. Always love the show.

Robert, that was impressive! Keep the videos coming! Ignore the trolls.

Happy new year and thanks for ur show. Pls also show more automotive tools in between ur outdoor indoor tools as well. I like ur shows

@ToolShow

6 ай бұрын

Will do! And Happy New Year!

Informative!

Well I've SPENT About $14.000 on LITHIUM power tools and LANDSCAPING Equipment in the past 2 years enjoying them now but will cut back for rhe Winter

I love your show,and wish you a wonderful year...and a lot more sessions ❤❤❤❤

@ToolShow

6 ай бұрын

Thanks man! Happy New Year!

Once again a reminder why I have only bought a few Milwaukee tools. I won a couple too.

​ @ToolShow Looking forward to this episode

Jesus there's was a bunch I didn't know about. Gonna have start shopping

I first guessed around $42k, and then quickly upped my guess to $140k as I forgot about the high-priced concrete and electricians tools that I will never buy. :) As for how much of these I want to buy myself, maybe around $1100 list. Granted, I already own a LOT of Milwaukee tools, so $1,100 is just the new stuff. Happy New Year everybody, and I'm looking forward to lots of great Tool Show KZread content in 2024!

Wow that’s a lot of reading by yourself great job. Happy New Year to you and your family 🍾🎊🎉🍻

@ToolShow

6 ай бұрын

Thanks, and you too Jim!

Milwaukees tool selection is the only reason why I started buying. I was all Dewalt before.

That 3/8" packout socket set was available last year.

It's got to be closer to 200k if you had to buy all of the jaws and accessories for all the force logic doodads. Not to mention all the packout to keep it organized

@ToolShow

6 ай бұрын

LOL true. If a bunch of new sockets ONLY came in a set, I counted that as one tool and price. But if you could buy them individually, I added them all up as well. (Like the $40 sockets)

What was new about the impact wrench at 7:10? It sure looks exactly like the 2767 which has been out since 2017.

1 billion dollars (pinky finger to mouth like Dr evil).

Thank you I really like to see the price there are a few stuff I want

Honestly wish Milwaukee would get every thing out on the market, still waiting on Packout Rolling Tool box handle refit. Even Milwaukee rep says they don’t know when it is coming out…..

@d.sack2727

6 ай бұрын

I thought they said the handle would be out already and the box was next year but I agree man, I want it.

As an electrician, I always use my m12 impact driver gen 3, and it's just so amazing. I can't wait to see the Gen 4 lol

Awesome job Rob. You did not miss a beat. Was just hoping that next time you can do it all in Darth Vader's voice. Lol love the show. Happy New Year's brother!❤️🙏

@ToolShow

6 ай бұрын

You too!

⁠ ”NEW Power Tools from Milwaukee!” my butt. Title should have been “How Much to Buy All 551 Tools Milwaukee launched in 2023?!? We Found Out!”

@ToolShow

6 ай бұрын

These are all the new power tools they launched this year. Some STILL haven't reached the shelves. I explain exactly what the video is in detail in the first few sentences... and everyone is sticking around to see the video. I don't have the luxury of simply explaining my video in the title. I'm competing against Mr. Beast for your attention man. And if I don't do a good job, my family doesn't eat.

That’s a lot of red 🟥⬛️🟥⬛️🟥⬛️❤️❤️ Happy new to everyone 🥳🧱👍🏽

$60 for the new packout replacement handle 😳

THAT WAS SIC😮!!!!

Nice work! Now can we get all the part numbers, hahah

@ToolShow

5 ай бұрын

Literally thought of that, but you have no idea how hard it is to read that many part numbers. Had I more time (I got the idea for the video on Monday) I would have done it, but it was a challenge getting this written, shot, and edited by Friday as it was.

All these fancy tools and still no 1/2" crown, 16 gauge sheathing stapler for us carpenters. We can cut the wood, nail the wood, router the wood, but still can't staple the sheathing on without dragging the compressor cords and hoses out to run the pneumatic staplers. WTF?

@ToolShow

6 ай бұрын

This is a very good point.

Have been hard core Milwaukee since the late 70s (1/2” Magnum Holeshooter). Makita was 1st to the viable battery tool market but they were disappointing. Milwaukee finally released its 18v Drill/Driver which is actually comparable to the Magnum Corded … I’ve killed 3 so far (only 1 was a Milwaukee Flaw). Whatever Battery Platform you choose is the tool you tend to stick with because the batteries are so expensive. Its really good seeing Milwaukee creating tools to exploit its battery. I own several … Drills, Saws, Impact Wrenches … they’re all superb. CAVEAT; You have to check closely to make sure you get the “Right” tool because they have included some “Entry Level” tools in the line up which lack many expected features.

11:42 so happy I didn’t jump on the m18 brad nailer sale. Definitely would prefer the m12 model assuming they perform the same. I’ll trade weight and size for battery life any day

@user-wd7bb6mx4j

5 ай бұрын

Honestly can’t wait to see what they’ve got for the m12 line when the forge comes out. M18 really only necessary in heavy heavy jobs. M12 fuel is capable of anything I needed

Wow BRAVO!!! How long did this take you to do? lol this video is actually very helpful, Milwaukee should be paying you for this video.

@ToolShow

5 ай бұрын

20 mins to shoot, about 9 hours to collect info and write the script, and about 8 hours to edit I’m guessing. Would have to ask our editor. Glad you like enjoyed it!

I hope Rob was able to do this in one take 😂

@ToolShow

6 ай бұрын

It's a 15 minute script, and I did it in about 20. :) I had a few missteps, and twice I forgot to put the price on the teleprompter and had to run over to my workstation to get it while the camera rolled.

@brentm3

6 ай бұрын

Since other commenters (not you) appear to have lost their minds, I’ll take my stab at it. I want this video reshot in one take and done in one breath or I’m unsubscribing!

@benfowler2127

6 ай бұрын

@@ToolShow It was well done for how jam-packed it was! 😉 Good job Rob!

@benfowler2127

6 ай бұрын

@@brentm3 😂

@ToolShow

6 ай бұрын

WAIT! DON'T LEAVE! I'll DO IT! I'll DOOOOOOOEEEEEEET! @@brentm3 :)

150k pocket change for some.. just not for me 😂😂 Happy new years!! Much love!

Was close on my guess 165300

Is $1400-$1300 controlled torque! Dang…

@ToolShow

6 ай бұрын

It’s the TORQUE SENSE technology on them. They’re really just for linemen.

Well nobody can say Milwaukee have been twiddling their thumbs this year…… meanwhile makita managed a microwave I guess 😂.

@jack12343

6 ай бұрын

And 100 different variations of a string trimmer/brush cutter but no framing nailer.

@devinnelson5410

6 ай бұрын

And 14 new stick vacuums

@richiejames928

6 ай бұрын

76 grinders…

@ToolShow

6 ай бұрын

BWAAHAHHAHAHA you guys are painfully correct. I may just have to do a Makita version, but I don't know if you guys would watch it.

@richiejames928

6 ай бұрын

@@ToolShow I dunno. we are all busy these days but I’m sure most could spare a solid 45 seconds to watch that video.

Better be a milwaukee platinum tool deal

Milwaukee is the best tool company in the world !!! 🇺🇸🇺🇸🇺🇸🇺🇸

I love milwaukee tools and I know those tools are not cheap so I was guessing to buy every milwaukee tools you need to spend $190k

Still no top handle, left hand, 7¼" circular saw... Maybe R&D is busy building a combo radio/flashlight/bidet??

Wow. I feel sorry for the person who had to type all this into the teleprompter! Very clean read and editing. Now, let's talk financing...

@ToolShow

6 ай бұрын

LOL thanks man. Just a two man show here. I write the shows, Sarah makes them fun. :) But Sarah sat this one out after I told her what I wanted to do. Reading off technical information is NOT easy.

@gurugee2112

6 ай бұрын

@@ToolShow So, she's the smart one! Carry on!

Is there a MA class, I’m a addict!

@ToolShow

2 ай бұрын

We will all see you there!

That would be 590,000 AUD because our dollar is 0.68 and then the extra mark for the helluvit

I guessed about $100,000. I'm not close to that, but I am a bit ashamed of how much I did spend.

@ToolShow

6 ай бұрын

LOL I feel ya Home

if there will be same video about 2024 tools please add model if known, not price only) thank you

Relax people this was a shout out let the people know exactly each and every tool released by Milwaukee for year 2023 this was amazing

@ToolShow

6 ай бұрын

Thanks Jimmy!

55k is my SWAG

Does Milwaukee make somthing like an air hammer but battey operated isntead of air

Milwaukee recap not click bait!

$152,000 for the new tools. I was only off by $100,000. 😂

They release 551 tools but still take 6 weeks to repair one on warrenty lol

M18 pressure washer!!!

Minute 50 in and I'm thinking 130k!

If I win the lottery I won’t tell anyone but there will be signs

I want a 5G Wifi packout hotspot with great long range antenna.

My guess would be 150 thousand dollars

@ToolShow

6 ай бұрын

Duuuuuude. That was close!

if you want to buy all the tools even if you don't need or use them. the price I am guessing is $ 50,000.

$130,320.00 is the total

Hey milwauke needs to redesign their rear handle 7 1/2 saw needs to be a bit lighter smaller motar to compete with the makita 40v rear handle saw

didnt see AC BT dust controller.0950-20

I feel like Charlie bucket I just bought 2 new tools

$87, 543.78

Don't understand why the green laser is inside, and red outside. Green lasers are easier to see outside in daylight then red ones are.

551 tools cost 38,762

Where’s Sarah? 😢

@ToolShow

5 ай бұрын

I showed her the script, she laughed at me, and walked back out the door. ¯\_(ツ)_/¯

185000

12,000

@EthosArts

5 ай бұрын

Wrong as of 1:45 😅

125000.00

49,333

I value all the tools at $265,000.00

The count down music needs to be changed.

@toolshorts

6 ай бұрын

We have to pick one of KZreads songs. >.

@RidgidRon

6 ай бұрын

@toolshorts Does yputube have any Eagles or Bob Seger?

@RidgidRon

6 ай бұрын

Leonard Skynard?

11000

47,000

149500

@ToolShow

6 ай бұрын

Soooooo close.

$152,000 I think Milwaukee have got too many products ! how can that be economical, a lot of that stuff must be sitting on shelves unless everyones suddenly become millionaires and can afford to buy it all.

@ToolShow

5 ай бұрын

No one tradesperson needs all of those tools. There are a ton of specialty items in there (especially the really expensive stuff) that do very specific jobs, and still make people money.

@rocketmunkey1

5 ай бұрын

@@ToolShow I understand the concept of specialty tools I use several myself, but most of what Milwaukee produces are not specialty tools, they are generic tools and the amount of plastic trash such as packout accessories they've produced latterly is astronomical. They cant go on like that somethings gona give, they're not going to shift all that, the average (generic) persons pockets aren't deep enough.

146,756 is my guwss

@travvyn

6 ай бұрын

Dang I was so close lol

@ToolShow

6 ай бұрын

Dude you really were! @@travvyn

@travvyn

6 ай бұрын

We'll getter next year :p​@@ToolShow

I dont have that kinda money 😂

@ToolShow

6 ай бұрын

Samesies

@amshaq007CR7

6 ай бұрын

@@ToolShow but i do have a list of milwuakee tools i want. Lol but i will take my time and buy them

These are definitely not NYC prices 😔

@ToolShow

5 ай бұрын

Buy online?

$130k

@ToolShow

6 ай бұрын

Really close!

1 million dollars, muhahahahahaah

1 million

that's only Milwaukee....

@ToolShow

6 ай бұрын

Yup. If you guys like this video, we'll do the other brands.

100,000.00

$46,028

@mikeleiste6101

6 ай бұрын

Only off by $106,000. I think that pretty close

Milwaukee ain’t fucking around

I can't believe you didn't add links to all the tools in the description. Super weak. ;)

$136450

$116350.79

Milwaukee suck with their loose battery connection

forget about gimmicks, ad ons,and accessories using the tools is what counts , and they are not smooth,balanced or light like ,makita or dewalt constant users have the best judgement

I find it silly how much people are complaining about “clickbait”, as if every other tool review channel isn’t doing the same (or often, worse) type of title and thumbnail. This channel is a business, if they aren’t drawing views, they’re doing something wrong. As for the video, it’s not a bad roundup video for the year. People need to lighten up…

@caseybarnett8708

6 ай бұрын

Holy Milwaukee! Keep that shit coming. I’m your Huckleberry.

@delliott777

6 ай бұрын

This is what happens when Sarah doesn’t make an appearance. The lack of her joy, allows the gremlins through the gate!

Y'all must be old as fuck if you misinterpreted anything about this.

Wow last episode of the year with no tool deal....boooo

This is stupid where are the new tools

@ToolShow

5 ай бұрын

Every tool was new this year. This is a recap of everything Milwaukee launched this year. If you already caught all 551, then no need to watch the show I guess! :)