I hate the the bracket is backwards, because it should be adjustable for more downward force, but now it can't be adjusted, and looks like it's at the wrong angle to give downward force. You made a good effort, but it looks messed up due to the wrong angle.

Probably need 2 pieces half inch spacer for both side and trimming the side of the bracket as well.

I really want this wing for my is350. I wonder if the frs ones fit because they’re so much more affordable 🤔

I bought the item in the overview section, but when I tried to turn the bracket the other way, the screw holes didn't line up and I couldn't attach it. I think I bought a different one.

I might have missed it but hopefully you used some Loctite on those screws so they don't come loose. I personally hate drilling holes so very interesting concept for the wing. Hopefully it doesnt harm the trunk or quarter panels in any way!

@spec_egg

Жыл бұрын

The wing stand bolts do leave some indentation underneath the trunk, where it’s clipped on.

@vlenhoff

11 ай бұрын

@@spec_egg I think he meant if you used loctite on the screws. You put loctite on the screw before you screw them in, so they don't become loose with vibrations.

Looks good

Will still work with a Miata NB2?

This has convinced me just to buy a spare trunk lid from a wreck and drill it.

NA can use?

I bought the SARD spoiler for my MX5 ND also, despite hving to drill 8 holes on it, it turns out awesome! Did they give u any screw nuts for the bracket (the trunk part), and two pieces of metal/foam pads?

@spec_egg

8 ай бұрын

Glad it worked on the ND as well! I’m not 100% sure which screw nut for the bracket you’re referring to but it mine came with those 3 set screws on each bracket. It didn’t come with any foam pads tho.

yoooo W

flip the hookplates horizontally maybe then,the wing's feet 'll come inside of the trunk line and hopefully u can close it with the bolts samely tighten

Isnt the wing on backwards? Or is it just me....😢

Is it not possible to swap the brackets over to the opposite sides rather than flipping them back to front? (Or does the hole spacing not allow for it?) 7:59

@spec_egg

11 ай бұрын

The only orientation is the one we ended up using. Otherwise, the holes did not line up with the bracket

Do you know if this would fit the MR-S?

@spec_egg

Жыл бұрын

We’ve never test fitted it. The NC trunk measures 41-42.5 inches across, since it is curved

How has this wing held up? Any issues with your trunk flexing yet?

@spec_egg

7 ай бұрын

Holding up great. There’s no flex that I notice, probably because of the mounting point being on the side rather than in the middle.

Is this the same spoiler that carbon miata is selling for 499 usd?

@spec_egg

Жыл бұрын

I think so. I saw the pictures of the spoiler on their website and everything seems identical.

Why not just get two custom made attachments to the wing ? Would look much better and fit more accurately.

Hey do you think it’ll fit an nd ?

@spec_egg

Жыл бұрын

The NC trunk measures 41-42.5 inches across.

@j870117erz

8 ай бұрын

Bought one for my ND, bracket doesn’t fit but can custom make one that fits. The boot of the ND is more narrow than the NB and 86(BrZ).

it was like having a tooth removed watching this

I think its backwards

Where is the Asian guy with the F87 M2 Comp?

@spec_egg

Жыл бұрын

Who? 👀