Nicely done. I've had my 2019 Tuono Factory for 10 days now and this will probably be one of my first mods.

@COMMANDERREVZ

5 жыл бұрын

The stock pipe is decent, but the Akra is even better!!!

@hendryroodt3100

4 жыл бұрын

just remove the exhaust flapper valve cables

Very helpful video, I'm also going to install my exhaust pipe myself

Daaaaamn, that Moripovick sounds good

@COMMANDERREVZ

3 жыл бұрын

Ya, subtle, but much more throaty.

Nice Video..... And Nice Akrapovic Exhaust Sound...... AWESOME..........!!!!!!! 👍👍👍👍👍

So nice sound !

@COMMANDERREVZ

4 жыл бұрын

Thanks dude! I'm happy with it...although costly.

I have a 2018 1100rr and am having a hard time justifying the price of this exhaust. I like that it doesn't require a remap and it isn't overly loud all of the time, but $2,000.00 is double the price of the SC1-R (SC1-R will also need a remap +$500.00). Very nice exhaust, I believe you made the right decision.

@COMMANDERREVZ

5 жыл бұрын

Thanks. There are louder pipes out there, but I didn't want it to be obnoxious.

Awesome video 11:00 "This is the russian version of our blue loctite" 🤣😂🤣 Akropovic is slovenian 😆 or as you call it maripovic - Subscribed

@COMMANDERREVZ

Жыл бұрын

Thanks! Sorry for the late response.

look at those tires you dont mess around thats a beautiful bike I think 8 would get one of those bikes but the nearest support is 400 miles away

@COMMANDERREVZ

3 жыл бұрын

That is a major issue. That's too far to expect to enjoy owning one of these things.

$2000...I mean cmon Akraprofit

@COMMANDERREVZ

5 жыл бұрын

LOL!!!

Hi you are supposed to put the aluminum washer back on from the origonal silencer, looks much neater.

@COMMANDERREVZ

5 жыл бұрын

I was thinking that, but it is really thick so wasn't sure bolt was long enough. I will re-visit that. I agree that would look better. Thanks.

Very good exhaust fitment video. Very nice bike. Did you notice any performance change, like bike is smoother, or bike backfiring on overrun with a closed throttle, or fuelling no longer right.

@COMMANDERREVZ

4 жыл бұрын

Hard to say. I did this mod after only 200 miles or so. If there is any improvement, it is very little. The fueling is still right.

Gutes Video 👍 thx

@COMMANDERREVZ

3 жыл бұрын

Thanks!

Great vid , helped me a lot with my own installation. Still I'm still a bit puzzled how you managed to adjust the cables with valves in open position while the actuator is in closed position with contact off. At 9:33 and 13.45 we can clearly see the pulley in full open position (index touching the stop). So how did you manage to put the valve actuator in open position. I adjusted my cables with valve in closed position and ended up with cable adjuster in totally different position... also I'm missing a bit of travel to have the valve fully open and if I change the cable adjustment to get that full opening then the valve doesn't close totally anymore....

@COMMANDERREVZ

3 жыл бұрын

Sorry I took so long to get back to you. I didn't end up with any problems. I installed the cables into the actuator with the power off. When I powered up the first time, the actuator cycled once and ended up fully closed. It fully opens when giving it the beans.

Hello. How did you know how much tension to put on the exhaust valve cables? How do you know if the valve opens completely? Thanks. Great bike...

@COMMANDERREVZ

5 жыл бұрын

If you adjust the collets of both cables to the same length that the original had, you will be OK.

Can see there's a big difference considering the cost

I am circling back around to this because I am actually about to pick up one of these dream machines!!! Mine is the RR version but I don’t care… I’m so excited! I would like to go with this exhaust can but another guy on here mentioned something about PADS system? Did you have to do anything other than just bolt this on?

@COMMANDERREVZ

4 жыл бұрын

Congrats on your new purchase. The RR will serve you well. I'm not sure that guy new much about this subject. There is nothing to do other than install the can, including no need for fuel re-mapping; this is why I selected this can. The only thing you have to do is remove the cables from the flapper valve on old can, re-install on new can. Good luck.

@gargamel7072

4 жыл бұрын

@@COMMANDERREVZ Hey Commander, you have to calibrate the flap inside the exhaust with PADS at you dealer, it just needs about 10 minutes. This is necessary for the correct functionality to hit the end points.

Where did you purchase it and what was the part number ordered?

@COMMANDERREVZ

5 жыл бұрын

I'm in the Minneapolis area. I ordered it from Leo's South in Lakeville. I show the part number is in the video when I open the box.

Did you also consider the carbon ackra?

@COMMANDERREVZ

4 жыл бұрын

I did. I settled on this one... maybe slightly better looking for this bike???

Did you remove baffle have the same exhaust but cant see where screw for baffle is

@COMMANDERREVZ

4 жыл бұрын

If you're talking about a silencer baffle, I have not removed it. Not sure if it is removable. I'd have to look into that.

@markgenders8010

4 жыл бұрын

@@COMMANDERREVZ hi thanks for your reply yes i did mean silencer baffle sorry and im thinking the same i know the carbon akra has a screw behind a grommit but nothing similar on this one

@COMMANDERREVZ

4 жыл бұрын

As far as I know, there is no removable baffle on this one. Personally, I"m fine with that... can't stand obnoxious pipes.

Does it requires to rewrite ECU or change to RACE ECU? Thanks to answer.

@COMMANDERREVZ

4 жыл бұрын

No. That is one of the main reasons why I chose this slip on over others. Aprilia even gives you a certificate that validates their approval of this system.

@KevinG-hi9cv

4 жыл бұрын

COMMANDER REVZ you should still activate the pre factory installed flash. Speak to an approved dealer ...... nothing to do but activate with a code you then have race on your dash

@elreydavid96

4 жыл бұрын

He literally said it all in the video smh.

where did you buy this? I can only find the full black one and I think this one is 100% nicer than the other

@COMMANDERREVZ

3 жыл бұрын

I was torn about the black or the silver. I'm glad I went silver. It cost a few bucks more, but I think you're right. I ordered it through my local Aprilia dealership. It wasn't cheap.

@nahbro104

3 жыл бұрын

@@COMMANDERREVZ that's what I thought, on thei website they say this slip on is available only throught dealers and I think that sucks, I'd order it from their site and install it myself but oh well

@COMMANDERREVZ

3 жыл бұрын

@@nahbro104 That's what i did; I bought it from the parts department and installed it myself.

The bike snarls like a lion with the Akrapovic. But stock one isn't that bad too.

@COMMANDERREVZ

4 жыл бұрын

Agreed. The sound improvement is there, but hardly worth the $1,400.

A lot of work for such a slipon

@COMMANDERREVZ

3 жыл бұрын

It really wasn't that bad. If I had not been filming, this would be about an hour job at the most.

Can you remove the db killer?

@COMMANDERREVZ

4 жыл бұрын

Not that I am aware of.

I cant tell was it louder or same as stock?

@COMMANDERREVZ

3 жыл бұрын

Not really louder, just more "race" sounding. It really howls nicely; especially at the higher revs.

Need to remap?

@COMMANDERREVZ

3 жыл бұрын

No, this is why I spent the extra $ to get this slip-on. No remapping is required. It's the only true slip-on for this bike.

Akra sounds like a Ninja 300

@COMMANDERREVZ

3 жыл бұрын

Sounds even more impressive in real life.

Trully Men don't wear gloves , congratulations mate

@COMMANDERREVZ

4 жыл бұрын

Thanks, Bro. I feel naked without gloves.

@elreydavid96

4 жыл бұрын

You should take the baffle out lol there’s enough muffled by the catalytic converter.

16:25 Exhaust

@COMMANDERREVZ

3 жыл бұрын

Yep!

Oh..ich muss den Motorradfahrern zeigen wie man 3 Schrauben installiert,und nen Auspuff Anbaut.Sowaa ist Handwerklich für nen Ami natürlich schon ne Gesellenprüfung.

Not much difference, 2015 stock exhaust sounds better

@rms7511

4 жыл бұрын

Yes, but the bike improved so much since the euro4 Update;) sound isnt everything.

@COMMANDERREVZ

4 жыл бұрын

This is a completely different animal than was the 15... which was a great bike.

Der Pott sieht Scheisse aus. Hol dir den Austin!😆