Thank you for every step of the way.

hi, I suspect that the reason that Bank MSB and LSB are "not working" for NRPN is probably that those are for Program change bank select.. ie CC 0, CC 32 respectively... TO select an NRPN requires an MSB, LSB of CC 99 & CC98 respectively

@MrMarco33333

5 жыл бұрын

Yes, I noticed that too. The MSB and LSB on the video is the in the 'Program' box - nothing to do with Date Entry CC6. Whether somewhere else you can set the MSB & LSB for NRPN I don't know as I don't own a MPC.

@delfiobacco7156

2 жыл бұрын

@@MrMarco33333 i think there are midi cc's dedicated to select msb and lsb for nrpn, just have to find which one. if this is the case, you need three cc's: msb, lsb and data entry

Thanks much for creating & sharing this. Very helpful! :-)

Happy New Year, TubeDigga and thanks for your great tutorials! I would like to add one important aspect to your Midi CC Automation - tutorial: In my setup I use a Moog SUB37, a DSI Prophet 6 and (new) a Novation Peak beside some other gear with my MPC Live (in standalone) being the "center-piece". As those synths have a very different CC- and NRPN-knob-assignments it would be rather inconvenient for me using Q-link-assignments on the MPC I choose to use a different approach: simplyfied explained I take the MidiOuts of each synth, merge them, go into the Midi-In of MPC LIve and go then via MidiThroughs back to the Midi-Ins of my synths. (yes, it is a Midi-Loop but with some clever settings on the synths and on the MPC Live it works quite well for me, trust me). This setup enables the MPC Live to record/replay everything that I do on each synth (notes-playing, knobs-movements etc.) without me considering "what CC is that bloody knob on this synth?"So far I´ve only tested MidiCCs which worked very well, now I´ll test the NRPN-side as well...

@TUBEDIGGA

6 жыл бұрын

Thanks Chris, glad you’ve found a good setup that works for you. I purposely kept things fairly simple and generic in this video (particularly the cabling) so it could apply to lots of people.

@bukaglasna

5 жыл бұрын

Can u make a video for this setup? Thanx

@panpriatel5985

2 жыл бұрын

Hello there Chris, would you care to share the settings you are referring to?

I love my ks rack for its easy hands on wave shaping. please make a video on it, so others can be inspired

You’re awesome

MSB and NRPN MSB are two totally different parameters. The same also holds true for LSB versus NRPN LSB parameters. Each one of these parameters is also assigned to a dedicated control change parameter number. The CC parameter for MSB is CC0. The CC parameter for LSB is CC32. MSB and LSB parameters that are shown on the MPC's Main screen correspond to CC0 and CC32 respectively and are for "bank select" and are used in conjunction with a program change parameter to call up a patch from an external synth, NOT for NRPNs!!! There are separate CC parameters that correspond specifically to NRPN MSB and NRPN LSB settings. CC99 corresponds to NRPN MSB and CC98 corresponds to NRPN LSB. As you stated in the video, these parameters can be used in conjunction with CC6 "Data Entry (MSB)." All of these parameters settings can be inserted as midi events in a sequencer.

Hello again. Thanks for the video. After checking the Bible and the manual I can't seem to find what I'm doing wrong. I want to sequence the tr8 via MPCX and I want to change the notes in the pads. I did it in Midi control menu but when I check the piano roll it's like I haven't changed anything. Any clues on what other things I may be doing wrong? The default pads assigned to those notes do trigger midi but I need several banks to trigger 11 different sounds...

Hello Tubedigga! I hope you can help me. I would like to be able to record the midi cc coming from my external synths on Mpc One in multi mode. The problem is that in multi, Mpc behaves as in single mode and records only the midi cc coming from the selected track, ignoring the others.

Thanks for the video. For the initial nrpn data entry can you input it directly to the list edit?

Speaking of CC:s, Could the looper on the MPC Live/X be activated by an FCB 1010 or similar foot controller? Does it listen for midi cc messages like "start", "stop" et c?

Since the release of 2.8. Could you do a video for this function in reverse. I want to use an external LFO to modulate parameters on the MPC.

Yo! Sending NRPN is possible but it is a faff. However, I have been finding that I sometimes programme in my sequence of 4 CC to control something and it doesn't actually send them where it should in the sequence, it instead sends them when I press 'stop'. I re-programme it a few times to get it working as it should and then hopefully it will stay like that. Changing settings on a QU16 mixer with the Akai. Thank you for your videos!

hi, thanks for your video, very helpfull! I have one question, If I export midi that contains midi note + cc to MPC live sequence. Can MPC live read this cc from external midi files and apply it to external gear? thanks!

hi, has anyone had troubles with getting the Akai LPD8 to align with the MPC Live? The configuration seems whack where some pads play the correct CC's and then other pads are way off....???????

Hi Tubedigga, Not getting any Information from MPC LIVE with a midi cable to USB on computer. The cable has midi light that shows data in or out. I do midi out from MPC to pc windows 10 I am hoping I have connection wrong or does MPC not give midi data to pc. All I want is to output midi to input on Cubase without MPC software. Your input greatly appreciated.

Tubedigger,,,How Do You Store And Retrieve Drum Files ,When Ever I Do This Then Return The Next Day And Load Up I See The Name Of The File But No Sounds And No Song And No Sequences Stored Within Same File Or Program Or Project On Either My Storage Or The Internal So I Must Be Doing Something Wrong,,,,ps,,,why wasn't an instruction manual given with this expensive standalone nothing to direct the buyers,,,, Please & Thanks For Your Help....🙏 Goddess Bless,, 🙏 Our Ancestors Bless,, 🙏 Honorable Saint Messiah Garvey Guide....

Looking to map a drum machine to be able to play from the mpc pads

Great video! Was wondering if could automate a Program Change in the List Editor? To have it trigger shortly before a Sequence ends vs having it right at the beginning of the Sequence?

@mysticsailor9

5 жыл бұрын

Yes.. no reason why not.. program change is simply CC32 so you can add it anywhere you like.. it will be sending this every time you go through the sequence so either do not loop, or know that your synth program may get reset.

Great vid! Any idea, vaguely, if Force has similar functions built in?

@TUBEDIGGA

3 жыл бұрын

Any midi device connected to the Force via MIDI can receive CC or NRPN messages, obviously which CC or NRPN parameters depends on the device itself. But the Force will send them out

Seems like the NRPN:s are recorded duplicated, there's two of each MSB:0, LSB:50, DataEntry:0. That's a bit strange. Also if Aftertouch is not used for anything better to not record it to get less cluttered datastream to the synth.

Hey TD, thanks for the video! Have you experimented with seeing the CC's out from your synths into the MPC sequencer to avoid having to map CC's for the Q links? Ex. doing a filter sweep from the synth hardware itself, but having it record into the MPC, so next pass the automation set. Do you know if this possible with LIVE ,1K, or any other sequencer you know of for that matter? Cheers!

@TUBEDIGGA

3 жыл бұрын

You’re sending the ccs out to the synth so no. You need to know what they are first. Maybe you’re getting confused with a synth that is also a midi controller? In that case you would set its local setting to OFF to avoid a midi feedback loop. Depending on the synth it may send a specific cc number from one of its knobs for example, then you might possibly know what cc to send back to its sound engine, providing they correspond.

@bennettsobel

3 жыл бұрын

@@TUBEDIGGA, thanks for the reply. Yes I mean a synth that sends cc's from it's knobs, like a MOPHO X4 for example. Simply sending out the cc information out from the synth to the sequencer, as opposed to sequencer to synth. In order to avoid having to map q-links etc...

@TUBEDIGGA

3 жыл бұрын

@@bennettsobel The MPC has a midi monitor. If the ccs that the synth is sending out are the same ccs it needs to receive back to control a particular parameter then switch off the synths LOCAL setting (most likely in the system or master midi settings). So it will act as a controller keyboard for the MPC but the MPC will send the information back to the synth engine avoiding a midi feedback loop.

Hey man. Thanks for these great videos. Really helped with my MPC Live. Hoping you can answer my question - I want to be able to send a midi cc at a specific time to start a looper recording on the first beat of the bar. Is there a way to record in ccs that is not a continuous stream from the q link buttons. I need just one event and for it to happen at a specific time. Is this possible? Please help! Thanks in advance for the reply!

@TUBEDIGGA

5 жыл бұрын

Leo Brazil I’m not sure it’s possible but also don’t know all the details of your setup etc - do you want to send the Live a midi cc event from another device? This may work. All I can suggest is enter midi control mode and see if looper record or something relevant shows up as a parameter with a dedicated cc number. Then you’ll have to find a way to send that to the Live. The only way to potentially send it internally or back to itself would be to have the midi out going back in to the midi in but this may cause a midi feedback loop. Another option you could explore is using an audio track and the ‘PUNCH IN’ record function but this obviously won’t be a loop. Search for Tubedigga Punch on here and I have a video on punch in and out functionality. You may also be able to use list edit and enter something at a specific time there. You’ll need to experiment with all of the above to see if any of this is possible. Good luck.

Currently trying to create patches via nrpn cause my gear is missing a battery for memory. In this case I think sequencing an NRPN in the step editor could be handy for loading a patch depending on if you can match the values. As far as bank msb and bank lsb I mostly see these working with my synths that have higher banks (a,b,c,d) like the blofeld.

I have both the Live and the X. I recently tried to midi sync the Live with the new Roland TR-8S and the results are underwhelming. I have a significant lag from the Live. I tried both using the Live as the master midi as well as slave and I can’t make it work properly. All I want is to trigger loops loaded into the Live and assigned to a pad as either a 4 or 8 bar loop. Nothing fancy. The Live is lagging significantly. Came across a thread when I googled “Live Midi sync” and it seems to be a real problem. You got any experience with this?

@TUBEDIGGA

6 жыл бұрын

I never had this issue, sync drifted a little on occasion with my Boss RC505 but not significantly. Have you checked all the system settings for both machines? Tried using a different midi cable? Sometimes people expect these things to work straight away but quite often a bit of configuration is required.

@lukvermeir9085

5 жыл бұрын

Recently I've bought an expert sleepers USAMO to clock the MPC from my DAW (Logic Pro x). Way better results with timing now. Now I can perfectly sync the Live to Logic in standalone mode, or in controller mode with the MPC Software. I don't use MPC Software as a plugin, as there are some troubles with the AU plugin and MIDI routing inside Logic. This approach might be handy if you want to record some stuff straight onto Logic's grid, or if you want logic do some other things along with the MPC. You even can send program changes to the MPC from logic, to change sequences so you have an easy way in logic to create a song with the Mpc. This is especially interesting if you approach the MPC as a beatbox, part from a bigger instrumentation / arrangement in Logic. All while the MPC runs perfectly in sync thanks to the USAMO. But in case of your situation: if you don't get both TR8S and MPC Live in sync with each other (did you try to switch master/slave relationship between both?), it might be useful to look for an external clock as well... For the MPC in standalone: you can use clock samples (audio) and load and program them into a drum program of your MPC and route that to a free MPC output that you connect to the USAMO clock. Now the Live becomes a tighter master device! Alternatively, there's the ERM Multiclock: more expensive, but more flexible device that I'd recommend more, as you can set it to master, and slave both MPC and TR8S more easily. They also have a cheaper MIDI clock that would perfectly do the job! Try and you'll be a happy person!!

Yours cc105, where do i find out what cc my system 1m or moog sub 37? Dont have the manual for the system 1.. pleas do more midi videos about setup and details for the clock,master etc...i have no clue!i just hook up the cables and play, then i mix live while recording 😣

@TUBEDIGGA

6 жыл бұрын

Online manuals, I don’t own either of those synths.

You seem to be confused about Bank MSB/LSB. They are not for NRPN messages at all. They are MIDI Control Changes set in the MIDI standard for selecting Banks (not Programs) on a synthesizer, drum machine etc (because some synths have more than 128 sounds, so store them in different Banks). Bank MSB is actually CC00 and LSB is CC32 (NRPNs use CC99 and CC98 for MSB/LSB). The MPC Live doesn't have any way to produce NRPNs using Q-Links but it can record them and play them back, as you have discovered.

@TUBEDIGGA

5 жыл бұрын

rozz3r Thanks, yes at the time of making this video I didn’t make the distinction between them and also wasn’t sure if you could set them on the main page which is were I was wrong. You’re correct, these fields are to set the values for cc0 and 32 for program changes.

@mysticsailor9

5 жыл бұрын

So, i do not have a Live.. so this is a supposition... however iF you simply send CC99 & CC98 to select an NRPN, then CC6 should be associated with that NRPN until another CC99 & CC98 are received no?

@ambidex

10 ай бұрын

@mysticsailor9 that's usually the case. I'm about to try this on my MPC, but what you're saying is accurate. Because of this, and the concern of leaving an NRPN "open", best practice is to send a Null RPN value (CC101 of 127 and CC100 of 127) when done editing a parameter, lest it be affected by something unintentionally. On my SQ-64 in Ctrl mode i always keep a button reserved to send the Null RPN. This closes any open RPN or NRPN.

I was told by AKIA support that if I have a MPC live and a MPK 249 that I can route the pads on the MPK to completely different sounds than the MPC is. So you could have access to all 8 banks of the MPC live on the two sets of pads, and you can route the faders and the knobs to different controls than the MPC and control different things with the MPK from the MPC. I wasn't sure that the tech at Akai was really sure that this was the case. Any feedback on this?

@TUBEDIGGA

5 жыл бұрын

Gary Usinger If you go to MIDI control mode, and press any pad you’ll see on the right that it shows the midi channel and note number for each pad. So yes, if you can configure the mpk pads to correspond with the pads on bank b for example, you could trigger bank a from the Mpc and bank b etc from the mpk.

Hej...do you have any video where u explain step by step how to connect and record sounds from external synth like for example a moog? I use Mpc touch with 2.1 soft version trying to hook a moog sub phatty but really im can not find the way how to do it...btw u do great job..

@TUBEDIGGA

6 жыл бұрын

This should be easy, just connect MPC midi out to Moog and sample back in to MPC. I do Skype/Google Hangout lessons so if you get stuck hit me up, tubedigga@gmail.com

@tomaszjankowski9522

6 жыл бұрын

Thank you for replay im gonna do it as soon as get home.....

Forget something that blue little icon said SND CONTROL.

Hi! Good AKAI MPC X tutorials by the way, would you help me? Thing is I'd produce a midi file in an external sequencer (Roland Mc 909) and loaded the same midi file into the AKAI MPC X , the automations are there, but nothing happens, there is a blue icon on the automation all of them 14 midi channels, my question is,if there is any way to set these automations to be running by the AKAI MPC X plugins, may be you know something about this issue, thank you.

@TUBEDIGGA

5 жыл бұрын

claroscuro 6 I don’t know for sure - it could be a few different things. The most obvious reason would be the parameters in the 909 are completely different to the MPC. So even if they have been successfully included in your exported midi file, the MPC won’t be able to make sense of them as the architecture/operating system of both machines are completely different

@claroscuro6209

5 жыл бұрын

@@TUBEDIGGA Make sense, but personally I think the MPC X should be able to re-read any midi information, or let you change them for another than MPC X VST or pluggin could read. Just thinking, thank you for your quick answer.

Is it possible to set up MPC 2.0 to send midi commands to Stutter Edit? I have it plugged in to an audio track, but i'm not sure if there is an option for sending Midi information internally

@TUBEDIGGA

6 жыл бұрын

Hi, you can control any available parameters of a VST plug in via the Qlinks either in Qlink PROJECT or AUDIO TRACK mode. Press and hold your QLINK button and press QLINK EDIT. Select the Stutter Edit parameter you wish to control, press LEARN either on your MPC Live/X (in the QLINK EDIT window) or in QLINK section of the MPC Software. Then turn one of your Qlink knobs and it should map that parameter to your Qlink knob.

@UseItMusic

6 жыл бұрын

TUBE DIGGA the only problem is that Stutter Edit needs to be triggered externally, there are no triggers on the GUI that you can learn from. The preset manager has a keyboard which works independently as a preview. If I put the qlink in learn mode, I cannot trigger a key for it to get the note value. If that makes sense

@TUBEDIGGA

6 жыл бұрын

Ok, well I’m not familiar with Stutter Edit so I’m not sure how it works. If it’s a note triggered VST that launches slices via midi notes then this could be an issue - does it work in your DAW (Ableton/Logic etc)?

@UseItMusic

6 жыл бұрын

TUBE DIGGA in a DAW, the plugin is placed on an audio track. Through the DAW you can access the Midi settings within Stutter to receive on a specific device and channel. Then on your DAW all you have to do is call up a VST Midi player and set the appropriate channel. I think the problem is the Midi info is not being seen by the 2.0 software. Stutter should show up like Microsoft GS Wavetable Synth in the Midi Mapping. That’s probably the only way. Thank you for your responses

Hi Tubedigga! I am trying to map faders from Ableton to the Qlink knobs on my MPC - is this possible? I really appreciate it!

@TUBEDIGGA

5 жыл бұрын

COLOR MUSIC Yes but the best way in my opinion is to do it in standalone mode using a midi to usb interface. So MPC midi out to your computer USB port, then create a midi track and configure the qlinks manually for the parameters you want to control. This video will show you how to use MPC with Ableton: kzread.info/dash/bejne/aXmppsh9Zcyqk9o.html

Whats up tubedigga? I would like to use my x to control strobe lights so i can make cool insta vids but dont know how any ideas? also how could i use my x as a vocoder?

@TUBEDIGGA

6 жыл бұрын

You could buy a lighting controller of some kind as some of them are midi controllable. Also there’s some strobe lights out there that respond to sound. The only way you could use the X as a vocoder is via a VST, otherwise you’ll need a hardware synth that has one, like a Novation Ultranova or similar.

Hi there,i',m just a noob midi guy who wants to control automation from Spectralis (Analog synth) into Mpc(1000) So if i understanded well i need to midi sync my midi controller (m-audio radium 49) with Spectralis first and after that sync M-audio keyboard with Mpc so i can record filter automation into MPC from Spectralis synths? Please make me understand this so i don;t have to put things on fire pretty soon cuz this problem is eating my positive energy .Thanks a lot,happy days!

@TUBEDIGGA

6 жыл бұрын

Hit me up on my Facebook page, I can give you a one to one Skype or Google Hangouts lesson, I can’t really answer this on here.

@ove1312

6 жыл бұрын

Can you tell me please where can i find your FB page? I;ve searched on FB for Tube DIgga but notthing found

@TUBEDIGGA

6 жыл бұрын

facebook.com/tubedigga

Is it possible to save a midi program for a synth to pull up later quickly? ie Can I set all the CC's I usually use, map them to qlinks and pull up the programs later?

@TUBEDIGGA

6 жыл бұрын

Yes of course, any programs that you save can be recalled and used with their specific qlink assignments - but you may have to save that within a project, I’m not 100% as qlink settings may be determined by projects.

@osands

6 жыл бұрын

I guess a template project would do it then. Still deciding whether to take the plunge on an X.

@TUBEDIGGA

6 жыл бұрын

Yeah just a template which you can ‘save as’/rename would do it

@osands

6 жыл бұрын

Thanks for answering my questions. Enjoying your vids.

@elmortobeats5919

6 жыл бұрын

Owen Sands it's worth it! But live is no worse exept lesser connections

Think the cc is gonna be editable in the step editor in an update?

@TUBEDIGGA

6 жыл бұрын

Let’s hope so, dragable anchors like Ableton would be superb:)

@MartinYamMoller

6 жыл бұрын

TUBE DIGGA yeah... List editor is fine... But its soon 2018! Draggable anchors on a touchscreen would be 👌

Hello man, quick question, when i record ( happens at my latest projects 3 or so ) it automatically records cc automations. Any idea what is going on?

@TUBEDIGGA

4 жыл бұрын

TheUnorthodauxApproach It will only record automation if the write automate button is engaged - I can’t tell you why it would record otherwise, unless something very odd is going on.

Hi! Can you make a Video explaining the internal automation? I`ve tried to write a filter cut off automation on my MPC X (newest Firmware) but I can only record it when I choose a single PAD. When I try to write the automation for the whole Programm or multiple Pads the Automation will not be written or readed. How can I make it possible? Any suggestions? BTW I try to do it on a Keygroup Programm but the same happens with a Drum Programm.

@TUBEDIGGA

6 жыл бұрын

You can record automation to any pad but only if you have NO PADS selected in the EDIT ZONES window, not MULTIPLE or ALL

@thomaskuss8228

6 жыл бұрын

Hi! i`ve tried it yesterday but I can`t find it out how it should work? Only way to select No Pads is to use Multiple in the edit zone and deselect all pads, When I do this the Filter will not effect any Pad and the automation will also not be written. :( Which way I can select no Pads and the Filter will effect all Pads or Keys at once? Sorry I don`t get it and it drives me cAZzyyy!

@TUBEDIGGA

6 жыл бұрын

The only way to affect them all at once is to use a filter insert effect on the entire program. Each pad has it's own filter and the idea is to automate each one individually. That is the default behaviour. Like I said, if you select ALL or MULTIPLE, it wont work. You can only automate the currently selected pad, or use the Qlinks to affect as many parameters as your hands/the Qlinks can accommodate simultaneously.

@lukvermeir9085

5 жыл бұрын

Just put a filter FX on the FX insert slot of that specific program, and automate it's cutoff parameter... Or you can send multiple pads or even programs to a bus, and do the same thing from there, but unfortunately there are no busses available in standalone mode.

I would like to record my rt-8 drum machines CC messages, but not the notes. So far i haven't found a way to not make the tr-8 send the notes, or have the MPC only record the CC messages. Because of latency if i record the notes on the MPC i hear everything twice close together. So for now i record all the midi while the channel is muted on the MPC. Then i erase the notes. There is probebly a better way

@TUBEDIGGA

3 жыл бұрын

It sounds like you’re sending and receiving maybe. All you need to do is send midi cc from the MPC to the TR-8.

@FuZZbaLLbee

3 жыл бұрын

@@TUBEDIGGA yes, but how do I just send the CC and not the recoded notes from the MPC to the TR-8

Hello Tube Digga, is there a way to rename the q-links?

@TUBEDIGGA

6 жыл бұрын

No, their labelling reflects the parameters you assign them to control. You could just verbally name them Mike, Sally, Brian, Neil, Mary etc just for fun but I don’t think that’s what you want. It might be comforting for long and lonely studio sessions :)

@ricorusso9458

6 жыл бұрын

TUBE DIGGA looks like a feature request 🤔

Digger this isn't regarding cc's but its relevant. I need a work around. I need to find a way to apply the xy effects to the master output and not just the program. Is there a way? I tried it many ways and haven't figured out a workaround.

@TUBEDIGGA

5 жыл бұрын

You can apply them to the master outs, but you cant automate them. You can automate them on individual programs though

@SirMalikCobra

5 жыл бұрын

@@TUBEDIGGA Yes, so listen, I'm trying to make a tape stop effect the entire master channel and record it into the sequence. How do I do it bro?

@SirMalikCobra

5 жыл бұрын

It's cool if it's not automated I just need it recorded into the track the way I performed it.

@TUBEDIGGA

5 жыл бұрын

You can’t be in the sampler mode and the XY fx window simultaneously. However you could use your qlinks in PROJECT mode and set up the xy ENABLE parameter in there so you resample the output and control the xyfx at the same time. For more control you could assign another two qlinks to control the X and Y axis.

@SirMalikCobra

5 жыл бұрын

@@TUBEDIGGA thanks I'll try that and see if it works. Akai needs to be ashamed of themselves making something so simple difficult.

What if a cc is already assigned? For instance cc74 is assigned to send control 5 on MPC One. But my jp08 needs cc74 for cutoff filter. How can I change this?

@TUBEDIGGA

9 ай бұрын

Not sure if I fully understand what you mean. Any cc numbers on MPC that you’re sending out from a midi program to your synth are fixed. So cc 74 on MPC will control whatever parameter your synth responds to for that number. Ignore any default labels, these are probably just pertaining to the old general midi standard assignments. Also, these can be edited and you can change the cc number for all the cc slots in a midi program. Just press edit in the top right of program edit. So you could change cc1 on page 1 to cc 74 and rename it to the parameter you wish to use it for your synth.

@purgeyou

9 ай бұрын

Well that answers my question actually, thanks. Also turns out my JP08 still had original firmware. Works perfectly now that I updated it.

Is it possible to map reverb or pitch, effects etc?

@TUBEDIGGA

4 жыл бұрын

Sandra Valencia Yes, you can use the built in qlinks to control the internal effects or a midi controller

@sandravalencia1649

4 жыл бұрын

thanks for reply , so I could map thru midi cc lfo , effects , pitch to a midi controllers knobs for I don’t have to menu dive ? Sorry kinda confusing

@TUBEDIGGA

4 жыл бұрын

Sandra Valencia Check this video which shows how to map external midi controllers to MPC parameters kzread.info/dash/bejne/ZnWclbqxmNW7aaw.html

@sandravalencia1649

4 жыл бұрын

Thank you so much didn’t see that, keep up the great videos people like you make things easy

MPC One owner here. Can I set any CC to be filtered and not sent?

@TUBEDIGGA

7 ай бұрын

If you mean sending cc via a midi program to an external device - you can’t choose what is not sent but rather what is. Go to program edit for the midi program and you’ll see 6 pages showing all the available cc parameters. Some are labelled to standard parameters like Pitchbend / Vol/ Pan etc, others are just cc numbers. I believe you can change any of the slots to a specific cc number which would essentially omit any you don’t want sent. This wouldn’t occur by accident so it’s not a concern.

@Kaffimusic

7 ай бұрын

@@TUBEDIGGA Thank you! I will have a look into this.