Your Meteor rear plug and play loom is really nice George, it looks factory rather than aftermarket. One of the nicest add on looms I've seen. Seeing the use of scotchlocks on the front loom seems a bodge after the quality of the rear loom. There's a company called "Automotive connectors" that sells the correct Yazaki connectors for those single terminal plugs, but I get the comments about cost. It took me weeks of research to find the correct terminals! Lovely how to guide, thanks for sharing.
@jayapoojari71222 жыл бұрын
Good job 👍👍
@RonConsumer2 жыл бұрын
Hey George, when will this be available on the TEC USA site??? Thanks.
@UPTHETOWN2 жыл бұрын
Bugger, wish you had the spacers a couple of months ago
@silverback39262 жыл бұрын
I want to put the 350 meteor handle bar switches on the classic 500. It would be nice if you could demonstrate that.
@philtucker12242 жыл бұрын
Thanks for this guide, do you also do an optional Rev counter kit for the Meteor?
@aezrizkamil5883 Жыл бұрын
Can you do a video on the Interceptor plug & play wiring kit please
@alexfr8113 ай бұрын
Nice!... sorry have you got a vid on how to fit a wider rear tire on the Int650, like the one presented here? thx heaps
@knotteddog2 жыл бұрын
Notifications on! #truefan
@richardwalker162611 ай бұрын
Do the rear indicators comply with the 240mm min. legal requirement when fitted without the extenders?
@jamesharvey8420 Жыл бұрын
Can you tell me where do I "cleanly" place or button up all the connection wiring on the Continental GT 650? The plug and play connection is toward the front of the bike seat? Seems all the initial connections would be bunched up under the fender? Indicators, tail light connection, plus resistors... then to the plug and play...This seems like it would all have to be spliced together or connected at rear by the tail light somewhere under the fender before the plug and play adapter, which seems messy and bunched..
@tluangtekhiangte35062 жыл бұрын
Name of the exhaust you used?
@stevebrayshaw72282 жыл бұрын
Can the standard RE front indicators be used with your drop down mounting and the TEC head light brackets on the interceptor ?
@georgemilburn6213
2 жыл бұрын
Yes, but you would need to drill the hole out from 10mm to 12 mm
@DC3AFA2 жыл бұрын
Maybe you can offer an LED lamp kit (or conversion kit) for the Meteor. Lamp size is a little bit more than 7“ so that no other LED insert will fit
@georgemilburn6213
2 жыл бұрын
I will look at that
@DC3AFA
2 жыл бұрын
@@georgemilburn6213 would be great!
@elickes Жыл бұрын
Ugh. I get 'wanting to make things back to stock', but it just seems like such a hassle.
@RajuSingh-xy1qw2 жыл бұрын
Sir can one more video on meteor Reborn footpags road in install in meteor like non cruise using
@georgemilburn6213
2 жыл бұрын
???
@RajuSingh-xy1qw
2 жыл бұрын
@@georgemilburn6213 I hope u understand sir what I'm saying..... reborn break pipe and gear pipe install to meteor like non cruise because bumps road and chassis r same
@CraigusUK
2 жыл бұрын
@@georgemilburn6213 I think he means getting rid of the feet forward position and heal toe shifter so its like the new classic 350
@cerfvolant112 жыл бұрын
I come here for the birdsong
@collyernicholasjohn Жыл бұрын
Australian bikers: the cat eye tail light looks great, but don’t extend far enough out the back to illuminate Australian size number plates on the standard tail tidy
Пікірлер: 25
Your Meteor rear plug and play loom is really nice George, it looks factory rather than aftermarket. One of the nicest add on looms I've seen. Seeing the use of scotchlocks on the front loom seems a bodge after the quality of the rear loom. There's a company called "Automotive connectors" that sells the correct Yazaki connectors for those single terminal plugs, but I get the comments about cost. It took me weeks of research to find the correct terminals! Lovely how to guide, thanks for sharing.
Good job 👍👍
Hey George, when will this be available on the TEC USA site??? Thanks.
Bugger, wish you had the spacers a couple of months ago
I want to put the 350 meteor handle bar switches on the classic 500. It would be nice if you could demonstrate that.
Thanks for this guide, do you also do an optional Rev counter kit for the Meteor?
Can you do a video on the Interceptor plug & play wiring kit please
Nice!... sorry have you got a vid on how to fit a wider rear tire on the Int650, like the one presented here? thx heaps
Notifications on! #truefan
Do the rear indicators comply with the 240mm min. legal requirement when fitted without the extenders?
Can you tell me where do I "cleanly" place or button up all the connection wiring on the Continental GT 650? The plug and play connection is toward the front of the bike seat? Seems all the initial connections would be bunched up under the fender? Indicators, tail light connection, plus resistors... then to the plug and play...This seems like it would all have to be spliced together or connected at rear by the tail light somewhere under the fender before the plug and play adapter, which seems messy and bunched..
Name of the exhaust you used?
Can the standard RE front indicators be used with your drop down mounting and the TEC head light brackets on the interceptor ?
@georgemilburn6213
2 жыл бұрын
Yes, but you would need to drill the hole out from 10mm to 12 mm
Maybe you can offer an LED lamp kit (or conversion kit) for the Meteor. Lamp size is a little bit more than 7“ so that no other LED insert will fit
@georgemilburn6213
2 жыл бұрын
I will look at that
@DC3AFA
2 жыл бұрын
@@georgemilburn6213 would be great!
Ugh. I get 'wanting to make things back to stock', but it just seems like such a hassle.
Sir can one more video on meteor Reborn footpags road in install in meteor like non cruise using
@georgemilburn6213
2 жыл бұрын
???
@RajuSingh-xy1qw
2 жыл бұрын
@@georgemilburn6213 I hope u understand sir what I'm saying..... reborn break pipe and gear pipe install to meteor like non cruise because bumps road and chassis r same
@CraigusUK
2 жыл бұрын
@@georgemilburn6213 I think he means getting rid of the feet forward position and heal toe shifter so its like the new classic 350
I come here for the birdsong
Australian bikers: the cat eye tail light looks great, but don’t extend far enough out the back to illuminate Australian size number plates on the standard tail tidy
𝘱𝘳𝘰𝘮𝘰𝘴𝘮