Academy F-111C RAAF 1/48 | 5 Minute Review
Тәжірибелік нұсқаулар және стиль
Greetings, today we will be taking a look at the Academy 1/48 scale F-111C RAAF boxing. This kit was kindly sent to me by a viewer and here is your chance to see what this kit has to offer!
instagram: hammerheadmodelmaking
/ hammerheadmodelmaking
Also be sure to check out Stonehaven Miniatures!
www.stonehavenmini.com/
Пікірлер: 56
I would probably but logo in corner it is a bit big xx great video review 😊
@HammerheadModelMaking
4 ай бұрын
The problem with putting my logo in the corner is that its easy to crop out. Which is what is happening now.
Looking forward to seeing this build with all the toppings!!!🎉🎉🎉
@HammerheadModelMaking
4 ай бұрын
Thanks Kevin!
Built that kit late last year, not one fit issue at all, didn't use decals they were rubbish found some nice ones online, I highly recommend this kit for its build quality.
@HammerheadModelMaking
4 ай бұрын
Thats good to know! Thanks for sharing, and yes, I do have some aftermarket decals for the kit.
It's distracting being so large. One in the corner as you see on TV channel screens would be much better in my honest opinion. When they started years ago there were complaints but , now it's expected and our minds just blank them out.
@michakrupowicz8901
4 ай бұрын
On tiktok the stealing person can just crop out the corner
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! Yeah, i have a logo on the corner of my videos now, but the issue is that it is easy to crop out, but I'm working on some other ideas right now that will hopefully be lest distracting.
i saw a gunpla youtuber writing the channel name on his fingers you could try that but the watermark isnt very distracting so that works too
@HammerheadModelMaking
4 ай бұрын
Ha ha, thats something I hadn't considered! Thanks for the feedback, maybe I'll try something out like that!
Look like a nice kit to assemble.
@HammerheadModelMaking
4 ай бұрын
Thanks for watching!!
You got the right ideal on the watermark but you need to make it smaller and put them in the 4 corners of your screen with some colors on at least two of them...
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
G'day Brett, You're right, some components of this kit are pretty basic; especially the engine exhaust assemblies. I'm ex-RAAF so I had the opportunity to see our F-111s up close. We had waited for these aircraft for so long the pilots and ground crews really got to like the Phantoms we leased as a stop gap. Once we all became used to the F-111s it was clear they truly were an amazing weapons system. I built this kit some time ago and had to get aftermarket engine parts and do some extra panel scribing to increase the accuracy of the model. I used liquid masking on the canopy and it really wasn't much of a chore. Yes, there was a decent deal of putty and 'sprue goo' used and some of the joining tabs etc. needed more than average clean up. That all said, the result was an impressive model that really resembled the appearance of the original airframe and the panel lines, plus the ones I added were well suited to the scale. Would I do this kit again...? Yes, it is worth it. The small detail of over 80% of the kit is, frankly, excellent. I don't know if Academy does a 1/32 version of the F-111 but I'd certainly like to have a crack at that one. Cheers, Brett, all the best and thanks for the video. Bill H.
@HammerheadModelMaking
4 ай бұрын
Hi Bill, thanks for all of the extra info on the kit, I'm really looking forward to building this one up, and like I mentioned, I do have a fair amount of aftermarket stuff that will hopefully address the issues with the kit. Its very helpful to hear from someone with both first hand knowledge of the subject matter as well as the kit, I'd love any other little bits of info you may have on both. Cheers! Brett
The water mark was a little distracting, but you must do what you need to do to protect your own work, looking forward the build series, best regards from Australia
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
Recommend a smaller water mark in one of the corners.
@HammerheadModelMaking
4 ай бұрын
Thanks for the feed back!
Sorry to hear some low-life is stealing your work, Brett. The watermark could be a little smaller, maybe even in a corner, like TV station’s ID(?). Thanks for all the hard work you put into making your models on video. I couldn’t do it, so I appreciate it greatly.
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
Can't wait seeing u build this pig. If im not mistaken ... No academy aardvark building vid in KZread yet So, Let's roll !
@HammerheadModelMaking
4 ай бұрын
Right on!
You can maybe put your logo on the background? Like a sticker on a cutting mat or something like that, won't obscure the model, but it's clearly visible.
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
Hello mr.head.great idea.no.i am not distracted.with sticky greetings. Your modellmate. Christian
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
I see why you did it, but yes, smaller, or potentially setting up a header bar with watermark in it (so it blends in better with actual content).
@HammerheadModelMaking
Ай бұрын
thanks for the feedback!
I have a guy selling it in my local area. I am relatively new to scale modeling (built 15 kits) I’m looking for something that doesn’t require too much effort and hope to buy more than one of them, I don’t have an airbrush yet, Is this a good kit for me? Or should I got for something else (anything you recommend)
@HammerheadModelMaking
2 ай бұрын
Its a rather straight forward kit and I didn't identify any areas that would give much trouble, I think its something you could handle, just be aware its a rather large aircraft and can be somewhat cumbersome to wield around the workbench.
Hi Brett, shame about the tictoc thievery! Unfortunately the watermark (or something like it) is almost a necessity to protect your videos. Looking forward to the Pig build. For whatever flaws the Academy kit may have it is certainly miles better than the Kitech one I have - it's a dog!
@HammerheadModelMaking
4 ай бұрын
Thank you! Yeah, I'm really excited to tackle this one!
The watermark is quite distracting, easy win is print the logo out on the blue cloth in the background having it over the sprues is quite hard to watch personally. but if it was behind them it would I think acheive the same effect without being anywhere near as distracting. Obviously decals is different but the sprues for sure
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
What is the product number for the KIT.????
@HammerheadModelMaking
4 ай бұрын
It is kit No. 12220
The watermark is fine. If you did a small one in the corner the tictok scum could just crop it out of the video. Good review man. Looking forward to a build video.
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback! I do have a few other ideas I'm work shopping, so I'm confident we'll get something figured out that works out.
Shame to hear that happening you put the work into your videos and only you should be getting the benefits of it I wish I could help with your watermark placement not many places you could put it where it can’t be cropped Looking forward to the build of the bird
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback, I do have some other ideas that I'm working on as well, I'm confident I'll get it figured out before too long!
It's a shame that your work has been hijacked by someone who seems it's okay to use your work. The watermark is okay, but as what has been said already smaller may be better. As far as the F-111C kit goes, I built the original run in the mid 90's and had purchased the F-111A, FB-111A, F-111F and the F-111E. Look at your review the updates for the chaff and flare dispensers and the updated weapons set is a plus. I may have to see if I can purchase one if it is still available. The E kit at the time had a weapons tree of the times. The other kits back then had just the fuel tanks. The FB-111A kit had the wrong set of weapons pylons and the wrong fuel dump mast to name a few. The F model kit I built with the Verlinden F-111F update resin set. I cut out the flaps and slats and scratch built those. Great review keep them coming.
@HammerheadModelMaking
4 ай бұрын
Yeah, I'm currently playing around with some other ideas as well that will hopefully be less intrusive than the watermark over the entire video. Thanks for the additional info about the kit, based on what you and others have said, with a little work it should build up into a very nice replica of the real thing, thanks for the feedback and taking the time to comment about the kit! Brett
#stopgreenscreenkids
@HammerheadModelMaking
4 ай бұрын
I dont get it.
@Jaykilyourbrain
4 ай бұрын
@HammerheadModelMaking there's a bunch of kids out there stealing footage while recording themselves in front of a Greenscreen and make themselves small so most people wouldn't notice its stolen content. Sorry if this was hard to understand, you make some awesome models by the way!
@HammerheadModelMaking
4 ай бұрын
@@Jaykilyourbrain Ahh, I see now, thanks for taking the time to explain it to me, and thanks for watching!!
It is distracting in its current position.
@HammerheadModelMaking
4 ай бұрын
Thank you for the feedback!
I think the logo as it is is too distracting and for me it spoiled the enjoyment of the video. I guess it's a fine line between protecting your videos from theft and discouraging existing viewers from coming back and watching more. I viewed this video all the way through (because I already know I really like your content) but actually I listened more than I watched.
@HammerheadModelMaking
4 ай бұрын
I appreciate the feedback, I think its clear that the logo over the content isn't really going to work, so I'm working on some other ideas. But, thanks for watching (listening) and leaving a comment! It helps!
Too large. Better if it is smaller
@HammerheadModelMaking
4 ай бұрын
It certainly is quite large!