Abba skylift is fantastic for my hayabusa.

That RSV is a *specimen* - the lift is cool too lol

I just got mine and totally love this lift. One problem though and till' you get the hang of it, on the right side, raise the bike close to a wall just in case, after you insert the the left side of the lift the bike tend to lean to the right. I almost drop the bike, luckily I had my inversion table to the right side and my Repsol lean against it and saving the day. The plastic on this bike is sooo expensive. Now the left side. I was an idiot and forgot to lock the wheels of the lift and my bike was doing an impression of the Leaning Tower of Pizza. A 490lb crotch rocket is more than my right knee could handle but I just had a sudden burst of power and pushed this bad boy back up with strength I didn't know I have :) haha. All these not the lift's fault and I just got too excited and careless. I totally suggest you get one if you love working on your crotch rocket during the winter months. I do :)

Looks like that belly pan is in contact with the lifting frame 😮

I'm hoping that it's easy for one person to use, since I live alone. Thanks for taking the time to make and post the video.

Awesome bit of kit. I am currently using the much more basic ABBA superbike stand which is brilliant.👍

I had one for my ktm1290gt its a great bit of kit. I found it useful to grease the screw and hold the bobbins in place with a little grease as I work on my own

I bought an Abba stand in January for my GS and recently sold it. If you want it mainly for maintenance it's very good, but I wanted to use it more for moving my bike round the garage as I have to put it into a tight area in front of my car to store it and for cleaning. For these activities I personally found my constands dolly better for moving the bike around in the garage as the concrete floor in mine is 30 years old so not that smooth. The constands had rubber coated wheels rather than the pure hard plastic ones on the Abba and a much more stable base rather than the extended legs on the Abba which flex resulting in it being more difficult to move about woth the Abba. Cleaning wise I found front and rear paddock stands allow better all round access (apart from underneath) than the Abba. Obvioysly if you have a really smooth garage floor that wouldn't be a problem but if you're just thinking about using it to clean your bike and possibly move it around IMO there are better options. As with any option you choose- paddock stands, Abba stand or a bench each have their advantages/disadvantages so I'd suggest it's important to think what it is you intend to use it for. Their superbike stand with the wheel base thing might be worth considering as an alternative too.

@CamiloSantana

2 жыл бұрын

You can replace those casters at will for a few pounds/euros/bucks. it's one bolt. common thread. the issue is more environmental than product

Bad practice that you didn’t insert and lock the safety pin in the hydraulic lift after you’d risen the bike to the desired height.

@riggers7480

Жыл бұрын

Well, Mr Ballantyne, I couldn't get it high enough to get the pin in the first hole, to begin with, due to the fault. I'm merely reporting here that my lift doesn't work, as delivered, to make others aware. I'd suggest your 'bad practice' comment might better be directed at ABBA delivering stuff with unresolved problems.

Thanks Matt I traded in my bmw for a road king. The bmw was much quicker. But the Harley made me appreciate the view.

Oh that's a neat piece of kit mate!

@KaiserWheelHelm

2 жыл бұрын

Did you see those bearings 🙈

problem is that stupid giant bar gets in the way of working one the bike!! you'd have to turn the bike around potentially to get into certain areas around the middle of the bike.

I'll do this on my own al the time.

Paul is a natural TV Presenter, we need him doing more tech stuff on your channel 👍🏻😎

@KaiserWheelHelm

2 жыл бұрын

He'll only prattle on about braking efficiency.. nobody is interested in that 🤷🏻‍♂️

@TheDervMan

2 жыл бұрын

@@KaiserWheelHelm ROFL

@KaiserWheelHelm

2 жыл бұрын

@@TheDervMan I am going to be doing more stuff out of here I hope.. I just need to convince them 🤞

@TheDervMan

2 жыл бұрын

@@KaiserWheelHelm Once their commission starts rolling in you won't be able to stop them ;-)

How do you get the swinging arm out if it is lifting it from the swinging arm pivot ?

Can you do everything with this type of lift compared to a normal flat bike lift ? Any pros cons ?

Blimey those bearings 🤪....one of the most important service items to be done but always gets missed. Is it worth checking if there are needle rollers on the frot swing arm pivot. Some bikes have a mix of sealed and needle roller bearings. I've bought my bearings from Swindon Bearings Westmead Ind Est....you just need to take the old bearing in to them and they'll match it up. Not sure if they do needle rollers tho! Should improve the ride as well 👍

@KaiserWheelHelm

2 жыл бұрын

Good shout that PP.. I'll mention it to the guys 👍

I will not lie... I was cringing watching that demonstration as the bike got higher and higher..

@peppino1435

2 жыл бұрын

I agree it seems unnatural 😳

Common issue with the early RSV/Tuonos. Has yours had the swing arm recall done?

@KaiserWheelHelm

2 жыл бұрын

First I've heard of it, I'll check 👍

@semajohn

2 жыл бұрын

@@KaiserWheelHelm Here is a link from vehicle recall UK. "APRILIA RSV1000 Recalls - Vehicle Recall UK" www.vehicle-recall.co.uk/make/APRILIA/RSV1000/amp

@KaiserWheelHelm

2 жыл бұрын

@@semajohn that link took me straight to porn hub 🤣😉 cheers I'll take a look

Any more and that belly pan was getting creased

That belly of those fairings are sitting on the cross bar. I guess I will not be getting this setup

@mauricecooper9016

Жыл бұрын

It depends on what bike you have. I had a 2012 GSX-R600 and the fairings had plenty of clearance at full lift

@jamesp8095

Жыл бұрын

I saw that... Would not be happy if it was my bike.

Only for sport bike?

@KaiserWheelHelm

2 жыл бұрын

Don't think so Roosevelt.. obviously it will be a little limited on certain bike types but I think it can handle most

A such product needing three (3) people to handle, secure then raise the bike, it must be a pretty sad product; especially this being a "Demo Video" ! 😁😁😁😁Perhaps the user(s) is incompetent ...

Looks useless if i want to swap an engine